Community discussions

Search found 22 matches

by stratonetworks
Tue Dec 19, 2017 12:19 pm
Forum: General
Topic: 802.11ac spectral scan
Replies: 158
Views: 32231

Re: 802.11ac spectral scan

IMHO, the fact than Mikrotik do no talk about this, do not announce any plan about this is very negative fot MK, beacuse a lot of clients are having decisions migrating some equipments to other maker, in the absence of solutions about this and other issues (openvpn over udp, gps sync and lot of them...
by stratonetworks
Wed May 17, 2017 1:42 am
Forum: General
Topic: OVPN Server and Client
Replies: 4
Views: 440

Re: OVPN Server and Client

I checked on my MKs OVPN server and neither show ips on this control You can see local and remote IP on active conections control.
by stratonetworks
Tue May 16, 2017 9:09 pm
Forum: General
Topic: DST-NAT BUG?
Replies: 4
Views: 457

Re: DST-NAT BUG?

Oh Sh*t! That's it all ? :? You're right! But, why when I indicate all ports, it works sucessfully ?

In any case, lot of thanks!!!
by stratonetworks
Tue May 16, 2017 7:20 pm
Forum: General
Topic: DST-NAT BUG?
Replies: 4
Views: 457

Re: DST-NAT BUG?

have to add that, the WAN port is a PPPoE interface, and this trouble rules are: add action=dst-nat chain=dstnat in-interface="pppoe - wan1" protocol=tcp to-addresses=172.17.1.2 to-ports=1-6999 add action=dst-nat chain=dstnat in-interface="pppoe - wan1" protocol=tcp to-addresses=172.17.1.2 to-ports=...
by stratonetworks
Tue May 16, 2017 4:40 pm
Forum: General
Topic: OVPN Server and Client
Replies: 4
Views: 440

Re: OVPN Server and Client

First, you can define a IP pool. Put this pool on profile for you ovpn server. If you want same ip for all clients on the server side, you must indicate it on Local Address. Also on remote address you must indicate pool for clients. You can indicate the same pool for local address too, so the local ...
by stratonetworks
Tue May 16, 2017 3:29 pm
Forum: General
Topic: DST-NAT BUG?
Replies: 4
Views: 457

DST-NAT BUG?

Hi ! I have a rule on dstnat chain that forward all ports to other router inside , otherwise: all traffic TCP from WAN forward to 172.17.1.2 This rule forward ok all ports. Suddenly I need exclude one port 7000 tcp from this forward, so I modify this rule and replace it for 2 rules: forward port 1-6...
by stratonetworks
Thu Apr 27, 2017 11:46 am
Forum: General
Topic: plans for 48 port switch ?
Replies: 5
Views: 917

Re: plans for 48 port switch ?

Hi again!
one client have entrusted us to update switchs from CPD. There's short plan for new 48 port swtich from mikrotik? or we can search for other solutions. All infraestructure of that client is mikrotik and we would like continue with mk.

Best regards
by stratonetworks
Wed Dec 28, 2016 12:01 pm
Forum: General
Topic: plans for 48 port switch ?
Replies: 5
Views: 917

Re: plans for 48 port switch ?

;-) aaaannddd, these plans are near ? ;-)
by stratonetworks
Mon Dec 19, 2016 8:32 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 21994

Re: MikroTik News December 2016 (Issue #74)

About Hap AC lite Tower: Why ethernet ports ? It would be more logical Gigabit ports ... or do not ?
by stratonetworks
Mon Dec 19, 2016 8:25 pm
Forum: General
Topic: plans for 48 port switch ?
Replies: 5
Views: 917

plans for 48 port switch ?

Hi guys.

There is plan for 48 port switch ? nearly plans ?

Salu2
by stratonetworks
Wed Aug 17, 2016 9:08 pm
Forum: General
Topic: Can restore 2011 config on 1200
Replies: 5
Views: 575

Re: Can restore 2011 config on 1200

Oh shit! i'm on a newbie error!
i'm forgotten that I must use export instead of backup

A lot of thanks, i had been a lot of hours nodding off with hard wall ;-)
by stratonetworks
Wed Aug 17, 2016 7:35 pm
Forum: General
Topic: Can restore 2011 config on 1200
Replies: 5
Views: 575

Can restore 2011 config on 1200

Hi! I am having problems, absurds problems, for restore config from RB2011 with 6.36 version to RB1200 with the same version. Restore file config is ok, RB1200 reboots..and i cant access for any ports, and don't answer for the ips for each ports. I have made this process three times with same result...
by stratonetworks
Sun Jul 31, 2016 12:12 pm
Forum: Beginner Basics
Topic: What Interface maps OVPN server interface ?
Replies: 3
Views: 731

Re: What Interface maps OVPN server interface ?

Thanks for the Reply! So it seems to work, beacuse ay this moment my OVPN virtual interface is listening on all of ports.


some suggestions for anyone more ?
by stratonetworks
Fri Jul 29, 2016 2:30 pm
Forum: Beginner Basics
Topic: What Interface maps OVPN server interface ?
Replies: 3
Views: 731

What Interface maps OVPN server interface ?

Hi comrades! I have a OVPN server interface. a Simple question that I don't find answer for it: the OVPN server  interface, which interface maps to ?  For clear out: mi RB2011 router have ten phisicals interfaces. how can decide the interface/interfaces from OVPN clients are conecting (firewall rule...
by stratonetworks
Tue Nov 04, 2014 1:58 pm
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 101452

Re: Solving 20km wireless link issues

At the begining of this post, for me is clear that height of warehousse's roof antenna is too low. The relfexion induced by metals warehouse's roofs is a nightmare for me on most situasions that I experienced. For example, lift two meters the pole is enough for gain signa quality. The same occurs if...
by stratonetworks
Tue Nov 04, 2014 1:05 pm
Forum: Beginner Basics
Topic: cant see my mikrotik board in winbox
Replies: 6
Views: 3029

Re: cant see my mikrotik board in winbox

You sure for hard reset. Bridging with a metal piece the reset circle on board, you must hear lot of short beeps. It mean that board is on factory defaults config, and you must access with 192.168.88.1.
If your pc is on this subnet, better.
by stratonetworks
Tue Nov 04, 2014 12:57 pm
Forum: Beginner Basics
Topic: WiFi Extender?
Replies: 5
Views: 1453

Re: WiFi Extender?

You can make it more easily. You must configure three AP with same ssid, same channel and AP bridge mode. Then, add a wds interface on AP1 for the AP2 and AP3, adding MAC wlan address of them. Enable WDS static on config. Enable use one "default bridge" too, on wds config and add one bridge of cours...
by stratonetworks
Tue May 20, 2014 7:04 pm
Forum: Wireless Networking
Topic: mikrotik ptp link problem
Replies: 7
Views: 1930

Re: mikrotik ptp link problem

OK, but this CCQ is for link over load or link reposing ? What protocol are you using ? nv2 ? n-Ntreme IMHO test must be made on tcp mode, beacuse udp mode isn't real scenario. Test tcp speed for one minute on download only and same for upload. You must watch CCQ progression for this minute, for pos...
by stratonetworks
Thu Apr 24, 2014 10:29 pm
Forum: Wireless Networking
Topic: High latency with R52N AP and Nanostation Clients
Replies: 5
Views: 1645

Re: High latency with R52N AP and Nanostation Clients

Thanks for this information, its util for me.


Thanks
by stratonetworks
Wed Apr 23, 2014 11:12 am
Forum: Wireless Networking
Topic: High latency with R52N AP and Nanostation Clients
Replies: 5
Views: 1645

Re: High latency with R52N AP and Nanostation Clients

Thanks for the reply. The problem is that there is a HotSpot on the bottom of the net. You must imagine the poblem without WDS :-(

Thanks!
by stratonetworks
Tue Apr 22, 2014 7:53 pm
Forum: Wireless Networking
Topic: help me
Replies: 6
Views: 982

Re: help me

Sorry but You must make an effort and explain what do yo want ¿?

You cant come here and say: ey! I want that you make me the job!
by stratonetworks
Tue Apr 22, 2014 7:35 pm
Forum: Wireless Networking
Topic: High latency with R52N AP and Nanostation Clients
Replies: 5
Views: 1645

High latency with R52N AP and Nanostation Clients

Hi, and sorry for my bad English. I'm breaking my head with this problem. I have one AP RB433 + R52Hn card. RouterOs Version is 6.0x. Connect to this AP there is a Nanostatio Loco M2 with the Last AirOs version (updated today, sorry dont remember the exact version). I'm working on 2,4 ghz, and using...