Community discussions

MUM Europe 2020

Search found 26 matches

by Crami
Wed Sep 05, 2018 7:35 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

More than four (4) years since my initial post, and still there is no proper ECMP support ...
by Crami
Wed Sep 05, 2018 6:41 pm
Forum: General
Topic: Feature Request: 802.1X over ethernet
Replies: 40
Views: 11555

Re: Feature Request: 802.1X over ethernet

Please, please, we need it, have to use different vendor if i can not do 802.1x
by Crami
Mon Jan 23, 2017 3:45 pm
Forum: Forwarding Protocols
Topic: IPv6 DHCP Relay with PD not installing route
Replies: 7
Views: 2160

IPv6 DHCP Relay with PD not installing route

Hi I try to use a Mikrotik CCR as a IPv6 Gateway for a bigger network. Client CPE gets its prefix via DHCP6 PD. The CCR has a DHCP6 Relay configured but does not install the prefix it hands out to the Customer CPE into the local routing table. When I configure the DHCP Server locally on the CCR the ...
by Crami
Fri Dec 18, 2015 11:30 am
Forum: Beginner Basics
Topic: Bridge and routing
Replies: 2
Views: 927

Re: Bridge and routing

Hi

Have you found a solution to that. I try to do something similar.

Regards

Matthias
by Crami
Wed Mar 05, 2014 10:10 am
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

Thanks for your confirmation. At least I know now that I'm not doing something wrong. Are there plans to support this? Would be a very nice and appreciated feature.
by Crami
Tue Mar 04, 2014 10:28 am
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

Shure, here ist the relevan config of the mikrotik router. # feb/02/1970 15:21:57 by RouterOS 6.7 # software id = XHEM-GX3Y # /interface vlan add comment="CES" interface=sfp1 l2mtu=4070 mtu=4000 name=sfp1-ces vlan-id=3214 /ip neighbor discovery set sfp1-ces comment="CES" /interface wireless security...
by Crami
Fri Feb 14, 2014 10:35 am
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

And now there is silence ...
Are you now convinced that there should be a "maximum-path" feature like in cisco ios to accomplish this? Or am I just to boring to be eligible for a rely.
by Crami
Fri Jan 31, 2014 3:45 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

So then the missing A on route 1 does not mean anything ? > /ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADb 0.0.0.0/0 212.25.9.1 20 1...
by Crami
Fri Jan 31, 2014 2:59 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

Yes, exactly ... But with the little command "maximum-paths 2" in the bgp config!
by Crami
Fri Jan 31, 2014 2:34 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

No, the other way around:
    +-------------- ISP_R1 -+
    |   EBGP                |
 R1-+                       | IBGP
    |   EBGP                |
    +-------------- ISP_R2 -+
R1 is Mikrotik
ISP_R1 and R2 are Cisco
by Crami
Fri Jan 31, 2014 2:18 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

Remote peers are not the problem. I want two default routes on the Mikrotik to the remote peers. That does not change anything if I make a session to remote peer loopbacks.
by Crami
Fri Jan 31, 2014 2:05 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

Have you red the section: Load Sharing When Dual-Homed to One Internet Service Provider (ISP) Through a Single Local Router


This is what I like to accomplish. The other examples are clear and is common practice, I agree...
by Crami
Fri Jan 31, 2014 1:05 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

Re: BGP ECMP (multipathing)

Please explain how this is different to what I already wrote. Loopbacks are not possible. There are two (2) BGP sessions to two (2) different routers. So the destination can not be the same.

Or am I wrong ?

Regards

Matthias
by Crami
Thu Jan 30, 2014 9:14 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 12671

BGP ECMP (multipathing)

Hi There I have setup where the Customer router (Router Boards) is connected to a MPLS ELAN (VPLS) cloud provided by a third party. We, the ISP are connected redundantly to that cloud with two Cisco Routers. I now set up two BGP sessions from the Customer Routers to the ISP Routers for redundancy an...
by Crami
Tue Jan 28, 2014 2:25 pm
Forum: General
Topic: Serial no of routerboard via SNMP
Replies: 4
Views: 1720

Re: Serial no of routerboard via SNMP

Just as an update in the newest MIB there is an entry for the Serial Number, and it seams to work for me.
OID: mtxrSerialNumber
by Crami
Tue Jan 28, 2014 5:39 am
Forum: General
Topic: Serial no of routerboard via SNMP
Replies: 4
Views: 1720

Re: Serial no of routerboard via SNMP

I would also be very interested in the ability to retrieve the serial number via snmp.
by Crami
Sun Dec 29, 2013 9:30 am
Forum: General
Topic: Feature Request: SFP DOM/DDM supoort via SMNP
Replies: 4
Views: 1902

Feature Request: SFP DOM/DDM supoort via SMNP

It would be nice if RouterOS would support reading out DOM/DDM values of the instales SFP/SFP+ via SNMP.
Sopport in the Webinterface is working well.

Regards

Matthias
by Crami
Wed Aug 28, 2013 10:10 am
Forum: Forwarding Protocols
Topic: Problems with MPLS IPv4 VPN
Replies: 64
Views: 20015

Re: Problems with MPLS IPv4 VPN

Pity is also that I don not have the luxury of going back to 5.x because on the CCR there is only newer releases ...
by Crami
Wed Aug 21, 2013 9:59 am
Forum: General
Topic: Authenticating Login Users via Radius with LDAP backend
Replies: 6
Views: 3341

Re: Authenticating Login Users via Radius with LDAP backend

Problem is, the LDAP is not an AD (it's an Apache Directory Server), we do not use Windows for such things.

@Mikrotik: would it be possible to add a config option to be able to do also PAP/CHAP for Webfig ?

Regards

Matthias
by Crami
Mon Aug 19, 2013 6:46 pm
Forum: Forwarding Protocols
Topic: Problems with MPLS IPv4 VPN
Replies: 64
Views: 20015

Re: Problems with MPLS IPv4 VPN

I have tried it with the new 6.2 release now, same result... As expected because the releas notes do not state anything in this direction. Downgraded now to 6.0rc13 and it worked for s short time, but now I can't get it to work at all... Also noticed that VRF's are not isolated from each other. I ca...
by Crami
Wed Jul 10, 2013 5:28 pm
Forum: General
Topic: Feature Request TR-069 CPE
Replies: 84
Views: 27393

Re: Feature Request TR-069 CPE

+100 :-) for implementing TR-069 (CWMP) on ROS!
by Crami
Wed Jul 10, 2013 5:25 pm
Forum: General
Topic: Authenticating Login Users via Radius with LDAP backend
Replies: 6
Views: 3341

Authenticating Login Users via Radius with LDAP backend

Hi I try to integrate the Miktrotik Routers into our central Radius AAA System. We use Freeradius with a LDAP backend. The problem I'm facing is that when I try to log in on the web interface is that it send's an authentication request with mschap and freeradius seams not to be able to handle that. ...
by Crami
Thu Jun 27, 2013 10:24 pm
Forum: Forwarding Protocols
Topic: Problems with MPLS IPv4 VPN
Replies: 64
Views: 20015

Re: Problems with MPLS IPv4 VPN

Is it normal that MT does not reply to support mails ? Was my first request, just wondering.
by Crami
Wed Jun 19, 2013 8:00 pm
Forum: Forwarding Protocols
Topic: Problems with MPLS IPv4 VPN
Replies: 64
Views: 20015

Re: Problems with MPLS IPv4 VPN

I sent a mail to support@ today in the morning, but have not heard anything until now. Lets see what they come up with.
by Crami
Tue Jun 18, 2013 4:32 pm
Forum: Forwarding Protocols
Topic: Problems with MPLS IPv4 VPN
Replies: 64
Views: 20015

Problems with MPLS IPv4 VPN

Hi I have a new CCR1016-12G which I like to use as part of my MPLS network. I attached it to a Brocade XMR via VLAN 2006. On this Interface I have enabled OSPF and LDP. I made 2 BGP sessions to my VPNv4 Route Reflectors and configured a VRF on the CCR and on the two Cisco Routers. On the CCR I have ...
by Crami
Wed Apr 24, 2013 4:26 pm
Forum: RouterBOARD hardware
Topic: 100BaseBX SFP Support
Replies: 1
Views: 648

100BaseBX SFP Support

Hi all

We are evaluating RouterBoards as FTTH customer CPE's and have now a RB2011UAS-IN in our Lab.

We tested serveral 100BaseBX SFP's but non of them seam to work. They see if the link is up or not, but no traffic is flowing.

Is there any solution to that ?

Regards

Matthias