We have a Nokia DF-16 XGS-PON OLTs behind a CRS518-16XS-2XQ. The DF-16 intercepts DHCPv6 Traffic to insert the Circuit-ID and other information into the requests and the forwards it via IPv6 LDRA - Lightweight DHCPv6 Relay Agent (https://datatracker.ietf.org/doc/html/rfc6221) The resulting packet is...

It would be relay nice to see the number of received prefixes. Even if it does not consider if they get filtered further down the line. Just how many are received by that peer.

You are absolutely right. That's why I do not use mikrotik for larger scale BGP deployments. They should use something prooven as routing suite, like frr or bird underneath.

More than four (4) years since my initial post, and still there is no proper ECMP support ...

Please, please, we need it, have to use different vendor if i can not do 802.1x

Hi I try to use a Mikrotik CCR as a IPv6 Gateway for a bigger network. Client CPE gets its prefix via DHCP6 PD. The CCR has a DHCP6 Relay configured but does not install the prefix it hands out to the Customer CPE into the local routing table. When I configure the DHCP Server locally on the CCR the ...

Hi

Have you found a solution to that. I try to do something similar.

Regards

Matthias

Thanks for your confirmation. At least I know now that I'm not doing something wrong. Are there plans to support this? Would be a very nice and appreciated feature.

Shure, here ist the relevan config of the mikrotik router. # feb/02/1970 15:21:57 by RouterOS 6.7 # software id = XHEM-GX3Y # /interface vlan add comment="CES" interface=sfp1 l2mtu=4070 mtu=4000 name=sfp1-ces vlan-id=3214 /ip neighbor discovery set sfp1-ces comment="CES" /interfa...

And now there is silence ...
Are you now convinced that there should be a "maximum-path" feature like in cisco ios to accomplish this? Or am I just to boring to be eligible for a rely.

So then the missing A on route 1 does not mean anything ? > /ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADb 0.0.0.0/0 212.25.9.1 20 1...

Yes, exactly ... But with the little command "maximum-paths 2" in the bgp config!

No, the other way around:
R1 is Mikrotik
ISP_R1 and R2 are Cisco

Remote peers are not the problem. I want two default routes on the Mikrotik to the remote peers. That does not change anything if I make a session to remote peer loopbacks.

Have you red the section: Load Sharing When Dual-Homed to One Internet Service Provider (ISP) Through a Single Local Router


This is what I like to accomplish. The other examples are clear and is common practice, I agree...

Please explain how this is different to what I already wrote. Loopbacks are not possible. There are two (2) BGP sessions to two (2) different routers. So the destination can not be the same.

Or am I wrong ?

Regards

Matthias

Hi There I have setup where the Customer router (Router Boards) is connected to a MPLS ELAN (VPLS) cloud provided by a third party. We, the ISP are connected redundantly to that cloud with two Cisco Routers. I now set up two BGP sessions from the Customer Routers to the ISP Routers for redundancy an...

Just as an update in the newest MIB there is an entry for the Serial Number, and it seams to work for me.
OID: mtxrSerialNumber

I would also be very interested in the ability to retrieve the serial number via snmp.

It would be nice if RouterOS would support reading out DOM/DDM values of the instales SFP/SFP+ via SNMP.
Sopport in the Webinterface is working well.

Regards

Matthias

Pity is also that I don not have the luxury of going back to 5.x because on the CCR there is only newer releases ...

Problem is, the LDAP is not an AD (it's an Apache Directory Server), we do not use Windows for such things.

@Mikrotik: would it be possible to add a config option to be able to do also PAP/CHAP for Webfig ?

Regards

Matthias

I have tried it with the new 6.2 release now, same result... As expected because the releas notes do not state anything in this direction. Downgraded now to 6.0rc13 and it worked for s short time, but now I can't get it to work at all... Also noticed that VRF's are not isolated from each other. I ca...

+100 for implementing TR-069 (CWMP) on ROS!

Hi I try to integrate the Miktrotik Routers into our central Radius AAA System. We use Freeradius with a LDAP backend. The problem I'm facing is that when I try to log in on the web interface is that it send's an authentication request with mschap and freeradius seams not to be able to handle that. ...

Is it normal that MT does not reply to support mails ? Was my first request, just wondering.

I sent a mail to support@ today in the morning, but have not heard anything until now. Lets see what they come up with.

Hi I have a new CCR1016-12G which I like to use as part of my MPLS network. I attached it to a Brocade XMR via VLAN 2006. On this Interface I have enabled OSPF and LDP. I made 2 BGP sessions to my VPNv4 Route Reflectors and configured a VRF on the CCR and on the two Cisco Routers. On the CCR I have ...

Hi all

We are evaluating RouterBoards as FTTH customer CPE's and have now a RB2011UAS-IN in our Lab.

We tested serveral 100BaseBX SFP's but non of them seam to work. They see if the link is up or not, but no traffic is flowing.

Is there any solution to that ?

Regards

Matthias