MikroTik

jwelebd

I am using simple queue for my client. Now i want to use a policy that when i change any queue type it will change the speed for all the queue of that type. Suppose 100 queues for 3mbps, 100queues for 4mbps when i change queue types then it will increase or decrease bandwidth. Note 1. Want to use si...

jwelebd

Hi I have assigned 1mbps for a client and create 2mbps limit in PCQ for youtube for buffer free playback. But now problem is some of my client download from youtube and get 7mbps+ when he download more then one video from youtube. How can i prevent it so that he can not get more then 2mbps if he dow...

jwelebd

User details database and postpaid billing can be use with static ip ??

jwelebd

May i use ROS 6.10 in RB750 ?

jwelebd

same problem in ROS 5.26 on RB750. please help

jwelebd

Thanks for reply

jwelebd

2 more attachment

jwelebd

Hello
logging to disk not configured,
graphing yes but not stored on disk
proxy is not enabled but it shows running.
please check screenshot.

Thanks

jwelebd

I have same problem.
Does RB750 support 6.XX or it increase CPU usage?
I am using 10mbps bandwidth, client under 100 person,
usermanager, no web proxy.

Thanks

jwelebd

Dear, Under my RB750 using ROS 5.26 there is user under 100 and i am not using web proxy. Using user manager for few clients of hotspot. But thought web proxy is not enable it shows uptime and running web proxy. But my router writes continuously in flash and that takes 100% of CPU usage. For this re...

jwelebd

Hi
I have 2 catagory user that is 2gb or 4 gb download limit.
I also have a local server that stores some software, song and other
to download.
I want to bypass the loacal server so that, the file downloaded from
local server will not be calculated within data limit.
Please help me.

jwelebd

Dear, I want to use mikrotik usermanager, as it has some user following username like jwelebd or any other else which indicates specific user, and already allowed for 30 days only. Now I want to generate several pin & pass in batch whick i can use to recharge user more 30 days. Is it possible in...

jwelebd

Me have same problem. But there is no firewall and services are enabled. what to do?

jwelebd

I can not connect with mac remotely. I shows message " could not connect to 00:0C:42:70:1B:00 (port 20561) timed out.

jwelebd

I have used 192.168.0.1 for static ip in router LAN interface and run hotspot in that interface with that ip. If i want to ping to router when hotspot is running it says Destination host is unreachable. But when i disable the hotspot it works fine. what's the sollution?

jwelebd

I m using RB750 and using static ip for my clients. now i want to setup hotspot in the same interface. but when it is done ping to static ip says "Destination host is unreachable". Please help me that what is the problem and how can i use both static ip client and hotspot client?

jwelebd

But I need to log which profile is using higher cpu. Or which profile is going more than 30% to 50%

jwelebd

I am using RB750 for load balancing for 3 WAN port and 2 LAN port which is serving about 150 clients and 50% of this client are up all time. My router send this message in log " router was rebooted without proper shutdown by watchdog timer". sometimes it takes 100% cpu usage and i can not ...

jwelebd

I am using RB750 for load balancing with 3 WAN port. Is RB750 processor sufficient for it or I need higher configuration routerbord?

jwelebd

Hello. my router is doing load balancing with routing mark. i have also static routing for dns of 1st and second isp. but when i traceroute the it shows that 1st isp dns going throug 2nd isp. why my static routing not working? All of them distance is 1. Here is my routing table. Is there any work wi...

jwelebd

I am using RB750 and want to use it's
ether1 for WAN,
ether2 and ether3 for LAN
and ether4 and ether5 in bridge which will manage bandwidth only

ether3 and ether5 will connected in the same switch.
Is it possible ?

jwelebd

I was telling about it. How can I activate it?

jwelebd

I have a new rb750 in which i used to route my local broadband user.
I also use queue graphing. Clock is necessary for graphing.
But when its switched off then it's time goes back to factory default.
How can I auto update clock of rb750?

jwelebd

There is none tu support us. So why we use mikrotik?

jwelebd

sometime we can not browse any web site though ping to st dns clear. if i have transparent proxy then which public ip count?

jwelebd

I have disabled this one

add dst-address=0.0.0.0/0 gateway=10.111.0.2 routing-mark=to_wla2

but no change.

latency to 2nd dns is high

jwelebd

I have done Dual wan from http://wiki.mikrotik.com/wiki/ECMP_load_balancing_with_masquerade With command - / ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local add address=10.111.0.2/24 network=10.111.0.0 broadcast=10.111.0.255 interface=wlan2 add addre...

jwelebd

first i used 123.456.789.74/29 ip for my mikrotik router. I used for lan 2 subnets thats are 192.168.0.0/24 and 10.0.3.0/24. when i wanted to use public ip for my customer then my isp provide 123.456.789.80/29 ip block and i used it in my LAN interface. that time i used it in one LAN interface. But ...

jwelebd

I want to set public ip for my local net which will use web proxy. But now problem is when i redirect the tcp-80 traffic to proxy port then it says the routers WAN side ip is accessing the web. how can i set it that the web server will detect my client ip not my server WAN ip? I have not done any so...

jwelebd

Please let me know details how can i configure for each site saperately.

jwelebd

Hi I use one server for my network from which some of my client use private IP (used for local client) and some of my client use public IP (used for bandwidth). There is a web proxy and all public and private ip both is redirected to its port. Now the problem is when any public ip client wants to do...

jwelebd

proxy don't use RAM cache white using disk cache in usb pen
here is the screenshot in attachment.
I used
Maximum cache size = unlimited
cache on disk = yes
cache drive = usb1

what is the problem?

proxy.JPG

jwelebd

yes i am using transparent proxy. how can i prevent it?

jwelebd

hi i have a mikrotik router 3.22 version installed on a celeron pc with 2GB RAM. I serve 2.5mbit/s for 180 clients. But there is a problem that WAN interface RX is greater than LAN interface TX and it is too much different sometime. At that time internet speed goes down. In /tool torch when i see th...

jwelebd

Mikrtotik 3.22 version currently installed.

jwelebd

my proxy is already running but no disk cache. so that i want to do cache in flash disk. but one thing is not clear, if i dont use ISP DNS ?

jwelebd

i have done that server. but now the problem is that, i have assign 10.0.10.1 for the server and client gets the ip from this network. but when i use any one ip from that range i can use internet without using any username or password. how can i prevent this to use internet within this ip range with...

jwelebd

I have done that. But web proxy do not use the flash drive.

jwelebd

i can not change cache drive in web proxy setting. why? what is the way using usb drive for cache?

jwelebd

Can I use any usb device or MMC for web proxy in my existing mikrotik box that have only one IDE port.

jwelebd

I want to set my own company logo in the user page where a user can see his usage report.
How can i do it? or I want to keep secrecy of server that my customer can not see it is built with mikrotik or any other os.

jwelebd

Thanks for your reply. But I found it from another web site and now time limit is working. But I have not fully setup what i need. I will let u know if i have any problem. Thanks again.

jwelebd

if i disable the ppp secret then client pc can not connect.

jwelebd

i have done that but there is no change of uses when i use internet from client. i think it is not working or communicating with ppp.

jwelebd

i have done my ppp server and installed user manager in the same server. i can log in from client pc but i can not limit the time usage in a day like 4 hour or 6 hour. i am not sure that my user manager or radious is working. please help me.

jwelebd

hi
i want to create new package for our client who want to use internet in cheap price.
suppose
1. one package that can use 6 hours within 24 hours but
2. another package that can only use 4hours within from 8AM to 8PM
please help me

jwelebd

if i use two mikrotik router in in 2 ip public range then can i use one mikrotik to use other ip range mikrotik or linux server? how can i do that?

jwelebd

i have created a multi wan router, which uses a range of ip forwerding to one isp and other range of ip to another isp. but after doing this i can not log in the server from remote pc with none of the public ip. please help me how can is solve it and log in from remote pc.

jwelebd

I want to set to package which one is day that user can use internet only from 10am to 10pm and another one package is night which will allow user to connect from 10pm to 10am. I use ppp server to connect user and specified ip for every user.

jwelebd

I installed mikrotik 3.16 on a flash card. It has only 64MB space which is not suitable for Disk cache. But there is Zerp value in "RAM cache used". The server has 2GB RAM, but it shows 1830MB free memory. How can I increase RAM cache utilization?

jwelebd

But my previous Mikrotik 2.9.44 used 512MB RAM fully. So why that version use so much RAM. There was an option for maximum cache size, but that is not available in newer version. If it has no work of 2GB RAM so why it support it?

jwelebd

I installed Mikrotik 3.16 in a pc with 2gb RAM. But it uses a little bit cache in RAM. How can I increase RAM usage for Web Proxy cache?

jwelebd

I have installed Mikrotik router os 2.9.44 upgradable upto 3.x Licence level 4. Was Installed on a Flash Memory Card. Now I want to upgrade my version to Mikrotik 3.0. But it does not recognize SATA DVD Writer. My motherbord have only one IDE port, where my Flash memory card installed. Can i upgrade...

jwelebd

Is it not so good for web proxy to use 2GB of RAM. I installed Mikrotik 2.9.44 on a PC with 2GB RAM, but it shows only 884.5MB. What happened to other RAM space? 2GB RAM supported by which version of mikrotik ?

jwelebd

If i want to use 4GB, then will Mikrotik support it?

jwelebd

I have installed Mikrotik router os 3.0 upgradable upto 3.x Licence level 4. Installed on a PC with Pentium-4 1.8GHz and DDR-1 512MB RAM. Now I want to install it on a Celeron 2.4GHz and 4GB RAM. What is the size of maximum RAM supported by Mikrotik?

jwelebd

i use static lease for one ip and one mac. but client duplicate their mac to another nic then use 2 pc at a time. now dhcp lease the same ip to 2 pc. how can i solve it?

jwelebd

Some of my client duplicate their MAC address of their LAN card and use 2 or more PC to connect internet. As I use DHCP how can i prevent to connect from multiple PC, and specify the pc that i allow will only be able to connect to internet and others are not.

jwelebd

I want to stop fully for the rest of the time. They would get connected which time i only allow.

jwelebd

I got an static public ip from my ISP. Then I masqurade it to my local ip.

jwelebd

Sometimes web page do not open. But when i refresh again then it open.

my configuration is
1. firewall from mikrotik web page
2. Transparent web proxy.
3. DNS caching. (I used 4.2.2.1 as secondary DNS and now it is removed but problem remains)

jwelebd

I want to set an ip block by which the user can use only at night from 12AM to 8AM.
I found timing in queue. but is it applicable for this purpose?

jwelebd

Thanks. It is correct and i checked it loging in with my server ip. now it is not shown.

jwelebd

protocol=udp src-address=255.255.255.255 src-port=2761 dst-address=0.0.0.0 dst-port=20561 interface=Local-lan Tx-rate=52kbps rx-rate=0

jwelebd

as i use static ip, nobody is complaining that he or she is not connected to internet or somehow any problem. so everybody have used their ip. so there is none to use dhcp. now what can i do?

jwelebd

How can i drop it. I tried several way, but did not work.

jwelebd

But I have not installed DHCP package in my server. Is this from any client?

jwelebd

i can seein LAN interface src-address=255.255.255.255 dst-address=0.0.0.0 broadcasting packet which consume much bandwidth. I think my bandwidth performance also reduced with that.
can anyone tell me what type of broadcasting is that and how can i stop it.

jwelebd

hi
if there is queue tree for a certain network and simple queue for each ip then which one will work?

jwelebd

Me also want to do that. I have two network with 2 ip block. i want to ensure 128 kb to each pc of 1st ip block and 64 kb to each pc of 2nd ip block how can i do it?

jwelebd

Suppose i have 10 pc within 192.168.66.2-192.168.66.11 and 10 pc within 10.0.3.2-10.0.3.11. I want to ensure that each pc of 192.168.66.2-192.168.66.11 get 128 kilobit/s and each pc of 10.0.3.2-10.0.3.11 get 64 kilobit/s maximum when they use. The amount of bandwidth will be individually for each pc...

jwelebd

hi i have two network calles 192.168.66.0 and 10.0.3.0. running on 512kbps Full duplex bandwidth. i want to assign 128kbps maximum for each first type ip user and 64kbps for second type ip user. i used PCQ but sometimes it does not work limit the bandwidth and user grabs more bandwidth. please help ...

Search found 72 matches