Community discussions

MUM Europe 2020

Search found 7 matches

by MythosGR
Fri May 31, 2013 5:06 pm
Forum: General
Topic: RB751G - Remap ports possible
Replies: 9
Views: 1438

Re: RB751G - Remap ports possible

RouterOS is current: v5.25

However a reboot made it work.

Thanks so much for your help!
by MythosGR
Thu May 30, 2013 9:09 pm
Forum: General
Topic: RB751G - Remap ports possible
Replies: 9
Views: 1438

Re: RB751G - Remap ports possible

How did you manage to remove eth2-master-local from bridge? (I try to make eth5 the master port) /interface ethernet> set ether2-slave-local master-port=ether5-master-local already in bridge /interface ethernet> /interface bridge /interface bridge> print detail Flags: X - disabled, R - running /inte...
by MythosGR
Mon May 27, 2013 10:41 am
Forum: General
Topic: Problem with failover routing without scripting
Replies: 5
Views: 2557

Re: Problem with failover routing without scripting

Since they are on the same switch, the connections from your PC are considered to be from the router itself, rather from a network, and are routed through the connected routes. ... In other words, it is as if your router is acting like a switch and PC is routed directly by your adsl router, bypassi...
by MythosGR
Fri May 24, 2013 1:50 pm
Forum: General
Topic: Problem with failover routing without scripting
Replies: 5
Views: 2557

Re: Problem with failover routing without scripting

Can you post the gateway of your PC? route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.251 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 Is the bridge interface from the default configuration still active? If yes, is eth...
by MythosGR
Thu May 23, 2013 8:11 am
Forum: General
Topic: Problem with failover routing without scripting
Replies: 5
Views: 2557

Problem with failover routing without scripting

Hi to all, I cannot have failover routing with recursive nexthop resolution working on a 751U-2HnD although I have spent several hours to find out what I'm doing wrong.... I'am trying the "Advanced routing failover without scripting" configuration but without the routing marks as follows: /ip route ...
by MythosGR
Wed May 22, 2013 9:29 pm
Forum: General
Topic: Advanced routing failover without scripting
Replies: 15
Views: 6419

Re: Advanced routing failover without scripting

I have no problem with route activation. When 8.8.4.4 is not accessible, route 1 becomes active. I am even able to ping adresses and ssh to hosts but not able to browse the web. I would really appreciate if somebod could help, as I have spend so many hours trying....
by MythosGR
Tue May 14, 2013 12:57 pm
Forum: General
Topic: Advanced routing failover without scripting
Replies: 15
Views: 6419

Re: Advanced routing failover without scripting

Hi to all, I bring up this thread as I cannot have it working on a 751U-2HnD although I have spent several hours to find out what I'm doing wrong.... I'am trying the "Advanced routing failover without scripting" configuration but without the routing marks as follows: /ip route add dst-address=8.8.4....