Community discussions

Search found 135 matches

by dawam
Sat Jul 23, 2011 11:52 pm
Forum: General
Topic: HOTSPOT STOPPED WORKING AFTER CHANGING CARD FROM R52 TO R52H
Replies: 3
Views: 967

Re: HOTSPOT STOPPED WORKING AFTER CHANGING CARD FROM R52 TO

Hello all, I have been having this issue with my hotspot. I have setup hotspot RB433ah with R52 wlan card and it was working well. But after I changed the card to R52Hn, the hotspot stopped working. If I disable the hotspot, i can browse from the wlan without any problem, but as soon as I enable ho...
by dawam
Mon Mar 07, 2011 7:09 pm
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 102728

Re: Solving 20km wireless link issues

sorry about hijacking this thread but what about that program that visually showed the fresnel zon and his link across the vertical slice of the land. what program is that and how do i get it :)
Radio Mobile, here http://www.cplus.org/rmw/english1.html
by dawam
Fri Jan 07, 2011 1:40 pm
Forum: Wireless Networking
Topic: Antenna Alignment 50 PTP Link
Replies: 15
Views: 3547

Re: Antenna Alignment 50 PTP Link

Google Earth uses true north. Compass uses magnetic north. True north and magnetic north varies from places. To check the variation go here. http://www.magnetic-declination.com/
by dawam
Tue Jan 04, 2011 10:09 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16541

Re: v5rc7 released

Did you upgrade from previous RC or fresh install?
It was from previous rc, cannot remember which one, probably rc4, that's the only one available in my laptop.
by dawam
Tue Jan 04, 2011 9:54 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16541

Re: v5rc7 released

User Manager has not been changed.[/i] I'm unable to log into the user manager in rc5 and rc6. I will try rc7 in a bit, but this doesn't give me hope. Is the UM still going to be refined? I like a lot of what I see in v5, but it still needs some work. Doesn't seem like there have been any updates t...
by dawam
Tue Nov 23, 2010 5:59 pm
Forum: Wireless Networking
Topic: trouble when implementing radius in routerOS
Replies: 6
Views: 1289

Re: trouble when implementing radius in routerOS

I have been already configuring the RouterOS, but I find some problem. when hostpot profile already on, I can't ping the wireless router from mikrotik routerOS, but when hotspot already off, I can ping it. and although I was fill the same radius key in mikrotik and wireless router, I can't login wi...
by dawam
Fri Jan 29, 2010 8:52 am
Forum: Wireless Networking
Topic: AP loses all it's connections? I'm baffled!
Replies: 8
Views: 1578

Re: AP loses all it's connections? I'm baffled!

Anyone have any advice on what a good next step would be?
Do a logging on wireless debug, you get more info on what is going on from the log.

http://wiki.mikrotik.com/wiki/Wireless_Debug_Logs
by dawam
Sun Jan 24, 2010 12:46 am
Forum: Beginner Basics
Topic: How do I set bridge with wlan and lan on RB433?
Replies: 10
Views: 11541

Re: How do I set bridge with wlan and lan on RB433?

@Dawam,Thanks, Do I need to set IP on lan interface after the bridge and internet interface
just like netrat said , you only set ip on bridge, the hotspot setup wizard will do the rest,
by dawam
Sat Jan 23, 2010 3:10 am
Forum: Beginner Basics
Topic: How do I set bridge with wlan and lan on RB433?
Replies: 10
Views: 11541

Re: How do I set bridge with wlan and lan on RB433?

from scratch

1.reset router
2.create bridge
3.set ip address on bridge
4.setup hotspot - select bridge as the interface
5.add wlan and lan to bridge

that's it..... but offcourse you also need to set your internet interface
by dawam
Sat Jan 23, 2010 2:57 am
Forum: Beginner Basics
Topic: what is Winbox hotspot host....?
Replies: 11
Views: 13184

Re: what is Winbox hotspot host....?

No, /ip hotspot host shows all users connected to the HotSpot interface. D without A means that client is connected to HotSpot interface, but it is not authorized. /ip hotspot active table should authorized HotSpot users. I once saw in IP-->hotspt-->Hosts a user with P. How to prevent that? if P - ...
by dawam
Sat Jan 23, 2010 2:48 am
Forum: Wireless Networking
Topic: ROS for RB800 - where/how to download latest version?
Replies: 4
Views: 737

Re: ROS for RB800 - where/how to download latest version?

Is http://www.mikrotik.com/ working right now?

Time: 1840 22/01/2010 +1CMT

trying to download update
Cannot access http://www.mikrotik.com from here too

Time :0848 23/012010 +8GMT
by dawam
Tue Sep 29, 2009 7:38 pm
Forum: Scripting
Topic: ROSInfo - router monitoring
Replies: 57
Views: 27662

Re: ROSInfo - router monitoring

Login ( ok ). Problem ::Add new router: I have problem posting new router, when I enter submit , I got blank screen.( the submit form goes blank, no new info displayed, no error). Router data not posted to database. Offline/All router count still zero value. Any insight much appreciated. dawam I so...
by dawam
Tue Aug 11, 2009 9:05 pm
Forum: Wireless Networking
Topic: My success story's
Replies: 4
Views: 1057

Re: My success story's

My success story's iam using mikriotik last 4years wireless performance too excellent firewall, ppp service, vpn,qos,hotspot works great .......... My special thanks to Mikrotik team this is 45km link i got 60mbps for TCP/UDP once again special thanks RB433/R5H vijaygrey, congratulation on the link...
by dawam
Fri Aug 07, 2009 5:57 pm
Forum: General
Topic: RouterOS V3.28 release
Replies: 9
Views: 1460

RouterOS V3.28 release

What's new in 3.28: *) fixed hotspot problem - on multi-processor systems it was not possible to set IP address for hotspot client during login - deadlock did happen; *) fixed hotspot problem - it was possible for hotspot to spike CPU usage to 100% and not to accept new logins during that time; *) a...
by dawam
Mon Aug 03, 2009 9:48 pm
Forum: Beginner Basics
Topic: Clean LOG - Mikrotik RouterOS 3.20
Replies: 3
Views: 1495

Re: Clean LOG - Mikrotik RouterOS 3.20

How to clean the log? of this three ways.

Winbox
Webbox
Telnet


Thanks
If you want to clear log, you can do this.
/system logging action> set memory memory-lines=1
/system logging action> set memory memory-lines=100
by dawam
Mon Jul 20, 2009 4:40 pm
Forum: RouterBOARD hardware
Topic: How do I turn off the MikroTik default Winbox page?
Replies: 8
Views: 2993

Re: How do I turn off the MikroTik default Winbox page?

or just disable www service in /ip service
by dawam
Wed Jul 01, 2009 9:08 pm
Forum: Wireless Networking
Topic: Operation problem on 5.8Ghz ...
Replies: 5
Views: 839

Re: Operation problem on 5.8Ghz ...

Hello Jorge, to be more precise - if we use 5.3 frequencies communication works. Problem is with 5800 channel and higher. if I choose for example 5Ghz-10Mhz band none of frequencies between 5800 and 5830 works. That is not problem on one particular AP. We have here more than 30 AP's installed on va...
by dawam
Thu Jun 25, 2009 9:35 am
Forum: Wireless Networking
Topic: How to disable the wireless access list...
Replies: 3
Views: 2585

Re: How to disable the wireless access list...

Somehow the access list filtering is turned on by default. I cannot see where to turn it off. Eventually I will want this but for now, I just want to get this radio up and running. Please help! I do not want to have to enter all of the MAC addresses of all connecting wireless devices right away!!! ...
by dawam
Mon Jun 15, 2009 7:29 pm
Forum: General
Topic: RouterOS V3.25 released
Replies: 34
Views: 3824

RouterOS V3.25 released

What's new in 3.25: *) fixed problems with files under MetaROUTERs; *) made WinBox work better on smaller screens; *) made WinBox to not bring down BGP & OSPF when BGP window was opened; *) WinBox menu is better organized, all sub-menus are sorted; *) fixed WinBox problem - /128 IPv6 addresses could...
by dawam
Mon Jun 01, 2009 6:27 pm
Forum: General
Topic: xen and Demo lincense expired
Replies: 1
Views: 453

Re: xen and Demo lincense expired

I experience the same thing, XEN failed to install using V3.23 & V3.24.

see here for details http://forum.mikrotik.com/viewtopic.php?f=15&t=32036
by dawam
Thu May 28, 2009 5:06 pm
Forum: Wireless Networking
Topic: please help my router reboot
Replies: 2
Views: 471

Re: please help my router reboot

But recently I noticed that my router reboot each time both wireless cards attached to an antenna is enabled. I disconnect the 2.4Hz from the antenna and the radio stops restart by itself. The radio is powered with a separate power cable with Dc adaptor 24v 0.8 mA. My card is 1watt on 2.4Hz & 500mW...
by dawam
Wed May 27, 2009 9:19 pm
Forum: Wireless Networking
Topic: Setting a Wireless Repeater
Replies: 1
Views: 4102

Re: Setting a Wireless Repeater

Hey guys, I've been reading through the documentation on how to set up a Wireless repeater on my Mikrotik device. I have a master RB433 which has DHCP enabled on the wlan interface. I wan to add another RB433 that just repeats the signal from the main interface and therefore enhances availability a...
by dawam
Tue May 26, 2009 1:09 pm
Forum: Wireless Networking
Topic: Demo license expired!System halted
Replies: 41
Views: 10248

Re: Demo license expired!System halted

yes i can winbox the rb. so what next?

please help here
why are you still playing with netinstall.

from winbox.
/sys package pr
by dawam
Tue May 26, 2009 12:17 pm
Forum: Wireless Networking
Topic: Demo license expired!System halted
Replies: 41
Views: 10248

Re: Demo license expired!System halted

i cant post anything again. the mac id will not even resolve when i try to run the netinstall.
is there a way i can redo everything again?

please advice
can you just winbox the RB. no need to use netinstall.
by dawam
Tue May 26, 2009 11:12 am
Forum: Wireless Networking
Topic: How to create a transparent AP with more wireless cards
Replies: 8
Views: 1086

Re: How to create a transparent AP with more wireless cards

No, I can not browse without the authorization page. Ip is received in the same pool. Today I have tryed to konfigure RB433 on the same way as I configure RB600 (with wich I have problem). It is workig very good and I don't have problems like I have with RB600. What a about upgrade IOS on version 3...
by dawam
Tue May 26, 2009 11:05 am
Forum: Wireless Networking
Topic: Demo license expired!System halted
Replies: 41
Views: 10248

Re: Demo license expired!System halted

Hi everyone,
No wireless button to configure the wireless card
Please advice
did you installed wireless package? can you post

/system package pr.
by dawam
Mon May 25, 2009 11:00 pm
Forum: Wireless Networking
Topic: HIGH LATENCY
Replies: 2
Views: 729

Re: HIGH LATENCY

Ineed advice on high latency issue. I have RB 600 with just 15 clients associated to it,but they always complain of high latency even when they ping only the base IP address without internet link.the traffic on it is not up to 3 mg still the latency is always going high even when the clients are co...
by dawam
Mon May 25, 2009 10:37 pm
Forum: Wireless Networking
Topic: How to create a transparent AP with more wireless cards
Replies: 8
Views: 1086

Re: How to create a transparent AP with more wireless cards

Thank you for your reply But,there is a problem. Only one SSID (when I connect my PC to one card) allow me to open my home page with athorization. When I connect my PC to other SSID, it received IP but it can not open home page. TNX can u browse without the authorization page ? if yes , then you ne...
by dawam
Mon May 25, 2009 6:03 am
Forum: Wireless Networking
Topic: How to create a transparent AP with more wireless cards
Replies: 8
Views: 1086

Re: How to create a transparent AP with more wireless cards

I need transparent wireless with one SSID. I have 3 R52H card, so I need to configure that all 3 cards are in one network, something like bridge. That is for HotSpot which has one DHCP server. ok, simple enough. create a bridge, - add all wireless card to bridge, - create hotspot on bridge thats it...
by dawam
Mon May 25, 2009 5:56 am
Forum: Beginner Basics
Topic: RB433AH Configuration
Replies: 6
Views: 1994

Re: RB433AH Configuration

the hotspot login page display after installation but later is not displaying again. So you need to work on the hotspot server, l ping the DNS from both Router and Client. yes. Destination :0.0.0.0/0 , Gateway: 41.207.97.93, interface: ether1. what was the result, can you ping ip and website in bot...
by dawam
Sun May 24, 2009 6:42 pm
Forum: Wireless Networking
Topic: How to create a transparent AP with more wireless cards
Replies: 8
Views: 1086

Re: How to create a transparent AP with more than 1 wireless car

Hi, I need transparent wireless with one SSID. I have 3 R52H card, so I need to configure that all 3 cards are in one network, something like bridge. That is for HotSpot which has one DHCP server. For now, I configured one bridge with IP addres 10.0.0.1/16, and one hostpot server with DHCP. ETH1 is...
by dawam
Sun May 24, 2009 6:30 pm
Forum: Beginner Basics
Topic: RB433AH Configuration
Replies: 6
Views: 1994

Re: RB433AH Configuration

did you get the hotspot login page?
where did you ping your dns? , router?, client?
can you ping website from router ? from client ?
check route 0.0.0.0/0 -> your gateway?
by dawam
Sun May 24, 2009 4:10 pm
Forum: Beginner Basics
Topic: RB433AH Configuration
Replies: 6
Views: 1994

Re: RB433AH Configuration

by dawam
Sun May 24, 2009 4:02 pm
Forum: Beginner Basics
Topic: winbox and bandwidth
Replies: 6
Views: 1897

Re: winbox and bandwidth

Thanks Letni I used torch and it showed Rx12.8 kbps and Tx382.3 Kbps I have about 158 items in queue. I guess this factor is causing to consume so much of b/w. Sanjeev 382 Kbps is too big, I don't think it has anything to do with queue. Probably back end process is running,( window updates, virus u...
by dawam
Sun May 24, 2009 3:39 pm
Forum: Wireless Networking
Topic: mini-pci 802.11n mikrotik
Replies: 28
Views: 4398

Re: mini-pci 802.11n mikrotik

You wrote enable .n support, how can I do this? Which pdf?
* RouterOS 802.11n support
* PCC matcher
* SMP improvements
* MUM 2009
http://www.mikrotik.com/pdf/news18.pdf
by dawam
Sat May 23, 2009 1:15 pm
Forum: General
Topic: SSL
Replies: 2
Views: 443

Re: SSL

Hello, Actually I'm not Mikrotik admin, but my ISP uses it to run a network here, I'm having a problem in all HTTPs pages, non of them loads (connection time out) I think there's some blocked port or something, I've contacted him but he says that I'm the only one who's having this error, so is ther...
by dawam
Fri May 22, 2009 10:43 pm
Forum: Forwarding Protocols
Topic: How to block ip address in MT
Replies: 19
Views: 81960

Re: How to block ip address in MT

I want to block this ip address from making any attempt thru ssh, ftp and others. How do i go about it by blocking this ip address and others that may try the login attempt on my MT. I want to know how t block it thru winbox and thru terminal. if you don't know the ip address try this http://wiki.m...
by dawam
Fri May 22, 2009 7:59 pm
Forum: General
Topic: RouterOS V3.24 release
Replies: 26
Views: 2707

RouterOS V3.24 release

What's new in 3.24: *) added ability to run non RouterOS in MetaROUTER; *) improved address-list and layer7 firewall feature support for smp systems; *) special-login items can now be disabled; *) fixed special-login to update used-by property of port; *) fixed USB UPS monitoring on RB433UAH; *) con...
by dawam
Fri May 22, 2009 4:33 pm
Forum: General
Topic: OS upgrade Help
Replies: 2
Views: 1053

Re: OS upgrade Help

by dawam
Mon May 18, 2009 2:38 pm
Forum: Forwarding Protocols
Topic: How i can load balance between two ISP
Replies: 4
Views: 6824

Re: How i can load balance between two ISP

Hi,

Thanks for the wiki url, i am able to balance the load now.
is there a chance that i can get an email whenever one of the network goes down...?
Yes,
by dawam
Mon May 18, 2009 2:33 pm
Forum: Beginner Basics
Topic: Spliting local and international traffic
Replies: 22
Views: 3988

Re: Spliting local and international traffic

1. mark connection
2. mark routing on that connection.
3. do routing on the routing mark.

no need to do packet mark.
by dawam
Mon May 18, 2009 12:49 pm
Forum: Wireless Networking
Topic: Channel wireless deployment advices?
Replies: 3
Views: 545

Re: Channel wireless deployment advices?

So it's not interference then. Search the wireless forum for possibilities. You can learn a lot from other user experience from this forum. I did. :D
by dawam
Mon May 18, 2009 12:11 pm
Forum: Wireless Networking
Topic: Demo license expired!System halted
Replies: 41
Views: 10248

Re: Demo license expired!System halted

what ROS Version are you using ? 133c don't like Version3. used 2.9.51.

What was the CPU load?
Package install?
by dawam
Sun May 17, 2009 9:10 pm
Forum: Wireless Networking
Topic: Channel wireless deployment advices?
Replies: 3
Views: 545

Re: Channel wireless deployment advices?

Hi, I have small community network powered by mikrotik software and PIV machines. Network is located in a village with one WISP having 2 omni antennas, our network have 6 antennas. I have problem with interference, and I think I shouldnt :). There is nothing else in the air. Is there some 'secrets'...
by dawam
Sat May 16, 2009 7:29 am
Forum: General
Topic: Hardware(CPU) problem of 1000U
Replies: 7
Views: 813

Re: Hardware(CPU) problem of 1000U

I have been using a few RB 1000u ROS V 3.9 almost a year now ( replacing my X86 box), PPPOE and Hotspot server, firewall, Bandwidth management, Powering service to a small town. Not a single problem yet :D .

No, I don't kick them because there are performing. :lol:
by dawam
Fri May 15, 2009 5:59 pm
Forum: Wireless Networking
Topic: Radius server not responding
Replies: 23
Views: 44639

Re: Radius server not responding

i figured it out how to make is work. My problem was that the radius server address and the router (add to user-manager) had differant ip? I changed them both to the same ip(192.168.8.1). And now it is working. What are you trying to do? Use Hotspot or wireless? OR? I do this all the time, works ev...
by dawam
Fri May 15, 2009 2:55 pm
Forum: Wireless Networking
Topic: Point to Point Bridge
Replies: 6
Views: 6492

Re: Point to Point Bridge

Hi guys, just purchased 2 RB433AH boards and some XR5 cards, and would like to set up a point to point bridge with the 2 radios. what would be the best way to go about it? there are a few option in the firmware that support it, but I am not sure on which would be best. I would like to stay away fro...
by dawam
Thu May 07, 2009 1:33 pm
Forum: General
Topic: Bonding (rr) with two radio (wlan1 and wlan2)
Replies: 6
Views: 1116

Re: Bonding (rr) with two radio (wlan1 and wlan2)

Wlans are not mentioned there because, EoIP tunnels are running over each wireless link and then those EoIP tunnels are bonded together. Just look at picture it explains everything. I have tried it without good results :? Can I leave Radio1 and Radio2 without IP address? For wireless maybe could tr...
by dawam
Tue May 05, 2009 5:46 pm
Forum: Wireless Networking
Topic: Radius server not responding
Replies: 23
Views: 44639

Re: Radius server not responding

so you are using usermanager on the same router as hotspot server.

what about
/tool user-manager router
by dawam
Tue May 05, 2009 12:09 am
Forum: Wireless Networking
Topic: Radius server not responding
Replies: 23
Views: 44639

Re: Radius server not responding

check your routing or adjust radius timeout parameter.
by dawam
Tue May 05, 2009 12:03 am
Forum: Wireless Networking
Topic: Wireless setup
Replies: 9
Views: 1360

Re: Wireless setup

You really don't need to hardwire the ethernet feeds to all 4 corners of the stadium. One can be fed and the other 3 in WDS or mesh provided you can take the bandwidth penalty. I do this quite often with Deliberant radios-same channel, unique SSIDs-in a WDS string, but it can be implemented with al...
by dawam
Mon May 04, 2009 11:26 pm
Forum: Wireless Networking
Topic: How do I make two Ap connect. Do i use wds or what? pls help
Replies: 11
Views: 4662

Re: How do I make two Ap connect. Do i use wds or what? pls help

can you help me through the steps to get it working with netinstall on windows vista?
maybe this will help http://wiki.mikrotik.com/wiki/Netinstall, or create a new thread if you still have problem
by dawam
Mon May 04, 2009 11:19 am
Forum: Wireless Networking
Topic: How do I make two Ap connect. Do i use wds or what? pls help
Replies: 11
Views: 4662

Re: How do I make two Ap connect. Do i use wds or what? pls help

my next problem is how can i use a cat5 cable reload routeros to my router boards. most of my boards have problems with the pci slots and power and i want to fix them all glad to hear its working, as for the boards I would usually try to reset ( system reset) it first, then upgrade software if its ...
by dawam
Mon May 04, 2009 11:16 am
Forum: Wireless Networking
Topic: Wireless setup
Replies: 9
Views: 1360

Re: Wireless setup

Thanx for all the answers and advice! But I did not get what to do with SSID and channel on APs. Do I use the same SSID nad channel or do I distinguish them by SSID and/or channel... thanx I did answer that at the top, I used only one SSID for a whole town, you could have different SSID for each co...
by dawam
Mon May 04, 2009 4:52 am
Forum: Wireless Networking
Topic: How do I make two Ap connect. Do i use wds or what? pls help
Replies: 11
Views: 4662

Re: How do I make two Ap connect. Do i use wds or what? pls help

its connected now and it has created a wds with a DRA but i cant ping each radio's ip
can you mac ping, is the ip on the same subnet?
by dawam
Sun May 03, 2009 10:10 pm
Forum: Wireless Networking
Topic: How do I make two Ap connect. Do i use wds or what? pls help
Replies: 11
Views: 4662

Re: How do I make two Ap connect. Do i use wds or what? pls help

Thank you very much. this is fine but in my case i have two ap. One (ap1) has the gateway to the internet and the other(ap2) connects to it in a client mode. I have put a client behind the ap2 forcing me to then ap2 to a ap-bridge mode but i still want it to connect to ap as well and maintain ap1 i...
by dawam
Sun May 03, 2009 7:44 pm
Forum: Wireless Networking
Topic: How do I make two Ap connect. Do i use wds or what? pls help
Replies: 11
Views: 4662

Re: How do I make two Ap connect. Do i use wds or what? pls help

i have two aps and they both have clients connected to them. I want the two Aps to connect together so i can pass traffic between them and still maintain the clients at both end. please help Ap bridge on both side, use WDS.. maybe this could help http://wiki.mikrotik.com/wiki/Wireless_repeater. as ...
by dawam
Thu Apr 30, 2009 4:39 am
Forum: Wireless Networking
Topic: Wireless setup
Replies: 9
Views: 1360

Re: Wireless setup

A higher gain antenna will provide a wider coverage area which is also a source of interference(noise). so your area of coverage will determine your antenna requirement. Are you sure you don't have this backwards? In general no, the above general statement is correct, then again, beam width, tiltin...
by dawam
Wed Apr 29, 2009 5:51 am
Forum: Wireless Networking
Topic: Wireless setup
Replies: 9
Views: 1360

Re: Wireless setup

I can mount equipment (433ah) on each (4) lof the lights (reflectors) towers. What antennas to use? Lower dBi (17 dBi) or more powerfull (21dbi). Those are Sector antenas witch 150 degrees coverage. A higher gain antenna will provide a wider coverage area which is also a source of interference(nois...
by dawam
Wed Apr 22, 2009 11:25 pm
Forum: General
Topic: What's new in 3.23
Replies: 23
Views: 2032

Re: What's new in 3.23

What's new in 3.23:
*) wireless - fix for RTS/CTS when used together with dynamic ACK timeout;
Can anyone say what was the problem that required this fix and what was the impact?

maybe this
http://forum.mikrotik.com/viewtopic.php?f=7&t=29275
by dawam
Wed Apr 22, 2009 12:47 am
Forum: Wireless Networking
Topic: Network with large diameter getting unstable
Replies: 8
Views: 2200

Re: Network with large diameter getting unstable

Do you used single or multiple radio on each AP. what's the latency between one end to the other. whats the traffic like.

used multiple radio , one for uplink, one for downlink, one to serve your user. the can still be in bridge mode.
by dawam
Sun Apr 19, 2009 2:31 pm
Forum: Beginner Basics
Topic: Router Setup problem
Replies: 15
Views: 2392

Re: Router Setup problem

I did all that ringht now, but unfortunately, its still not able to ping the gateway(41.220.228.129) Kindly advise on what more I should do. If you could give me the instructions on setting up the internet card starting from the IPs, that would really help. Thanks... if you cannot even ping your ga...
by dawam
Sat Apr 11, 2009 2:24 pm
Forum: General
Topic: RouterOS new manual topics
Replies: 4
Views: 4914

Re: RouterOS new manual topics

from my electronic background the photo in the wiki is measuring whether connection is shorted ( low resistance value) or open high resistance. So any multimeter capable of measuring resistance can be used. Multimeter is set to measure resistance The first photo - very low resistance (0.004 ohms - s...
by dawam
Mon Mar 09, 2009 11:56 pm
Forum: Wireless Networking
Topic: what is the max AP's in WDS-mesh
Replies: 3
Views: 839

Re: what is the max AP's in WDS-mesh

a large hotel that would require roughly 15-20 AP's and I was wondering if this setup will still work in WDS-mesh or if I should design this differently? If 5-7 AP's works for you, one probable solution would be to split them into 3 group. You would wire 3 main AP's and have 3 AP groups connect to ...
by dawam
Mon Mar 09, 2009 9:03 pm
Forum: Wireless Networking
Topic: CCQ Vs SNR
Replies: 2
Views: 1033

Re: CCQ Vs SNR

1. SNR can effect CCQ value,
2. Signal from multiple path can also effect CCQ.
3. Low signal effect CCQ.
4.
5.
6.

A good link is a link that has highest CCQ value possible.
by dawam
Thu Jan 08, 2009 9:57 pm
Forum: Wireless Networking
Topic: 2ghz antenna used on a 5ghz radio
Replies: 7
Views: 1044

Re: 2ghz antenna used on a 5ghz radio

It's like installing motorbike Tyre to a bicycle, sure you can ride it. VSWR : http://www.antennex.com/preview/vswr.htm http://en.wikipedia.org/wiki/VSWR When an antenna and feedline do not have matching impedances, some of the electrical energy cannot be transferred from the feedline to the antenna...
by dawam
Thu Jan 08, 2009 9:41 pm
Forum: Wireless Networking
Topic: AP or CPE problem?
Replies: 7
Views: 795

Re: AP or CPE problem?

Your AP only have routing define to 192.168.0.0/24. Probably you need to define 0.0.0.0/0
by dawam
Thu Jan 08, 2009 9:03 pm
Forum: Scripting
Topic: ROSInfo - router monitoring
Replies: 57
Views: 27662

Re: ROSInfo - router monitoring

I have no problem using rosinfo version 121. So snmp and accounting is working. Must be the new database code!

So. nothing happen after this statement in hosts.php
if (!@snmpget($post_host, $post_snmp, "SNMPv2-MIB::sysName.0"))
Any one else having the same problem on this new version?
by dawam
Tue Jan 06, 2009 8:21 am
Forum: Scripting
Topic: ROSInfo - router monitoring
Replies: 57
Views: 27662

Re: ROSInfo - router monitoring

ayufan, thanks for the file. Login ( ok ). Problem ::Add new router: I have problem posting new router, when I enter submit , I got blank screen.( the submit form goes blank, no new info displayed, no error). Router data not posted to database. Offline/All router count still zero value. Any insight ...
by dawam
Wed Jul 30, 2008 1:33 am
Forum: RouterBOARD hardware
Topic: If you have a RB133C, read here please.
Replies: 17
Views: 3613

Re: If you have a RB133C, read here please.

thanks for the insight,

will try again on the 133C, especially the firmware
by dawam
Tue Jul 29, 2008 8:58 pm
Forum: RouterBOARD hardware
Topic: If you have a RB133C, read here please.
Replies: 17
Views: 3613

Re: If you have a RB133C, read here please.

v3.11 fixed the 100% cpu for me

try it and see

I have upgraded almost 400 of them 133
Was the upgrade on 133 or 133C? we too have no problem with 133, the problem is with 133C.

thanks for sharing.
by dawam
Fri Jul 25, 2008 11:16 pm
Forum: RouterBOARD hardware
Topic: If you have a RB133C, read here please.
Replies: 17
Views: 3613

Re: If you have a RB133C, read here please.

RB133c, ROS V3, it's a no go. CPU shoot 100%, We mainly used it for CPE , so we are staying with V2.9.51.

We have used ROS V3.11 on RB133, RB333, RB 1000 offcourse, no complain.

Have not tried the 4xx series, on order..
by dawam
Thu Jun 19, 2008 3:46 pm
Forum: Wireless Networking
Topic: 74km Link In Colombia.
Replies: 9
Views: 1745

Re: 74km Link In Colombia.

Congrats guys,

what's was the antenna gain? Was it the grid antenna in the photos.
by dawam
Sun May 18, 2008 12:57 am
Forum: General
Topic: Setting up SQUID on 2.9.51
Replies: 40
Views: 7241

Re: Setting up SQUID on 2.9.51

/ip firewall nat add chain=dstnat action=dst-nat to-addresses=10.1.1.2 to-ports=8080 \ src-address=10.0.8.0/22 dst-port=80 protocol=tcp comment="redirect to \ proxy for pppoe network" disabled=no add chain=srcnat action=masquerade src-address=10.1.1.2 comment="MasQ \ for local" disabled=no . I have...
by dawam
Sat May 17, 2008 11:25 am
Forum: General
Topic: Setting up SQUID on 2.9.51
Replies: 40
Views: 7241

Re: Setting up SQUID on 2.9.51

this is my working setup ROS V2.9.51 /ip firewall nat add chain=dstnat action=dst-nat to-addresses=10.1.1.2 to-ports=8080 \ src-address=10.0.8.0/22 dst-port=80 protocol=tcp comment="redirect to \ proxy for pppoe network" disabled=yes add chain=srcnat action=masquerade src-address=10.1.1.2 comment="M...
by dawam
Sat May 17, 2008 7:02 am
Forum: General
Topic: Setting up SQUID on 2.9.51
Replies: 40
Views: 7241

Re: Setting up SQUID on 2.9.51

try to masquerade your proxy ip too.
by dawam
Sat May 17, 2008 6:47 am
Forum: General
Topic: Is the RB1000 noisy?
Replies: 3
Views: 828

Re: Is the RB1000 noisy?

Count me too on that, bought 3 units. Installed in datacenter, aircond room ,PPPOE and Hotspot service. Compact, fast, no issue.
by dawam
Sat May 17, 2008 6:33 am
Forum: General
Topic: Setting up SQUID on 2.9.51
Replies: 40
Views: 7241

Re: Setting up SQUID on 2.9.51

add this rule above your rule:

/ip firewall nat
add chain=dstnat action=accept src-address=10.10.10.104 protocol=tcp dst-port=80
expand the src-address
by dawam
Sun Feb 03, 2008 12:31 pm
Forum: General
Topic: Hotspot and Freeradius 2.01 Radius Server not responding
Replies: 2
Views: 3105

Re: Hotspot and Freeradius 2.01 Radius Server not responding

Wonderfull, thanks Alessandro, it works. Yes, I'm "playing" with phpmyprepaid. phpmyprepaid insert this 2 attribute in radcheck table Max-All-Session := 1800 ( that is in sec = 30min) Expiration := 01 Aug 2008 00:00:00 not really sure what you meant by I know that to disconnect a user that has reach...
by dawam
Sun Feb 03, 2008 4:32 am
Forum: General
Topic: Hotspot and Freeradius 2.01 Radius Server not responding
Replies: 2
Views: 3105

Hotspot and Freeradius 2.01 Radius Server not responding

I am testing freeradius 2.01 with hotspot for prepaid. Assigned 30min ticket (attribute :Max-All-Session :=1800), this works, user is terminated after 30 min usage. The problem is; After expiry of usage time I received "Radius Server is not responding" in Mikrotik hotspot login page Test with natrad...
by dawam
Sat Feb 02, 2008 5:55 pm
Forum: General
Topic: v3.2 released ;-)
Replies: 20
Views: 3664

Re: v3.2 released ;-)

Who said version 3 will end at 3.9? After ver 3.9 we expect 3.10, 3.11 ........ 3.99. I think we still have a very long way to go before ver4. ok, I hope your thinking is right, so we have a long way to go for a field usable version. Its funny not only we have to guest how certain ROS function woul...
by dawam
Sat Feb 02, 2008 7:07 am
Forum: General
Topic: Hotspot without Login Page
Replies: 1
Views: 697

Re: Hotspot without Login Page

look at ip binding in hotspot
by dawam
Sat Feb 02, 2008 7:05 am
Forum: General
Topic: Winbox
Replies: 3
Views: 643

Re: Winbox

in winbox look at user list allowed address
by dawam
Wed Jan 16, 2008 6:52 pm
Forum: RouterBOARD hardware
Topic: Upgrading to 3.0 on a RB500
Replies: 13
Views: 6158

Re: Upgrading to 3.0 on a RB500

if you go to the the download page and select RouterBoard 500 series, file to be downloaded is displayed as Router0s-mipsle-3.0.npk

so mipsle is for rb500 series.
ppc - rb333 & Rb 600
mipsbe - Rb400 series
by dawam
Wed Jan 16, 2008 6:07 pm
Forum: Beginner Basics
Topic: How to remove log messages?
Replies: 6
Views: 18792

Re: How to remove log messages?

How to remove log messages that is stored on disk? Is it possible to clear LOG window? /system logging action set memory memory-lines=1 /system logging action set memory memory-lines=100 This is in the forum somewhere, How to remove graf info that is stored on disk? Thanks Look inside tool - > grap...
by dawam
Tue Jan 15, 2008 11:07 am
Forum: General
Topic: HOTSPOT in RC14 broken
Replies: 7
Views: 1411

Re: HOTSPOT in RC14 broken

I had the same problem 3rc13 to 3rc14. on x86

After upgrade, Hotspot didn't work and saw the same broken firewall too.

After rebooting the second time. Hotspot is working and no broken firewall rules displayed.
by dawam
Tue Jan 01, 2008 4:45 pm
Forum: General
Topic: HotSpot Help
Replies: 3
Views: 672

Re: HotSpot Help

by dawam
Mon Dec 17, 2007 3:09 pm
Forum: Wireless Networking
Topic: Best way to run Hotspot on ether1 and wlan1
Replies: 3
Views: 1070

Re: Best way to run Hotspot on ether1 and wlan1

What is the best way to run a Hotspot on BOTH the ether1 and wlan1 interfaces? Should I bridge the Interfaces and run the Wizard? Should I run multiple Wizards, once on the wlan1 and once on the ether1? 1. create a bridge, also create ip addr on the bridge , easier to do setup 2. setup hotspot on t...
by dawam
Sat Dec 01, 2007 2:18 pm
Forum: Beginner Basics
Topic: Moving a configuration between routerboards
Replies: 3
Views: 1467

Re: Moving a configuration between routerboards

.... I sometimes get invalid interfaces and a generally non-working config on the new equipment. At this point I'm assuming that the RouterOS backup feature ties the configuration to a particular routerboard. ...i .. just change the interface to the right one, configuration is tied to the mac addre...
by dawam
Fri Aug 24, 2007 10:13 am
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 33196

Re: CPE-Antenna alignment via customer / Application available?

Cmit,

can I hav a try too plz - matdawam [at] gmail [dot] com

thx
by dawam
Fri Jul 27, 2007 3:18 pm
Forum: Wireless Networking
Topic: Transparent Bridging of Mesh network
Replies: 11
Views: 1541

Re: Transparent Bridging of Mesh network

The wonderful thing about using MT from my limited experience is that, the possiblities is only limited by our creativity and imagination. The only other issue we had is that some of the stations go off from time to time, is there anyway for the ap-bridge mode to be applied to all the 5ghz stations ...
by dawam
Thu Jul 26, 2007 9:29 pm
Forum: Wireless Networking
Topic: Transparent Bridging of Mesh network
Replies: 11
Views: 1541

Re: Transparent Bridging of Mesh network

omega-00, 1. set the centre AP as AP-bridge(wds) 2. set the rest of AP(5G) as stn-wds - AP(2.4G) as AP-bridge of course( u know that). create bridge on the 2 radio AP, connect both wlan to the bridge , define ip add on the bridge, that 's it. I have got this config working. unless I misunderstood yr...
by dawam
Sat Jul 14, 2007 9:29 pm
Forum: Wireless Networking
Topic: Access Point & DHCP
Replies: 5
Views: 968

Re: Access Point & DHCP

Any ideas with same unit and situation how to connect to the RB112 Access Point and use the mac-address filtering from the RB532A?
we use hotspot in RB532A for authentication. For multi point I would used static wds and have the client on wireless access list in RB112. Not sure what r you using.
by dawam
Fri Jul 13, 2007 8:18 pm
Forum: Wireless Networking
Topic: Access Point & DHCP
Replies: 5
Views: 968

Re: Access Point & DHCP

jflorio,

On RB112
Just create a bridge, add ether1 and wlan1 to the bridge
That should do the job.

Your RB112 should act as an AP you wanted.
You don't have to do DHCP-RELAY unless I misunderstood what you want to do.
by dawam
Wed Jun 13, 2007 9:55 pm
Forum: Wireless Networking
Topic: A Hotspot and a Bridge
Replies: 7
Views: 1322

Re: A Hotspot and a Bridge

Your can create hotspot on the bridge on site A, as for site B its depends on what you want it to be.
by dawam
Sun Jun 03, 2007 2:21 pm
Forum: Beginner Basics
Topic: where configuration?
Replies: 4
Views: 2219

Re: where configuration?

i know it but i want a simple file of configuration to put in my os router and then test it with my adsl
trottolino1970 , maybe you can try this

http://wiki.mikrotik.com/wiki/How_to_Co ... _xDSL_Line


, good luck.
by dawam
Tue May 22, 2007 10:18 pm
Forum: General
Topic: can make hotspot with bridge configration
Replies: 18
Views: 2202

Re: can make hotspot with bridge configration

There is no problem to create hotspot on the bridge interface, BUT only if all bridged interfaces are client interfaces - I am unable to see point of bridging it with public interface!! You are using local IPs, so just create Another public network! like macgeiver said ,, why?? bridge with public i...
by dawam
Fri May 18, 2007 5:08 pm
Forum: General
Topic: Hotspot problem - 2 MTiks
Replies: 4
Views: 667

Anyway I just realized that this problem can be solved by adding: /ip hotspot ip-bindings add address=192.168.0.0/24 type=bypass (wired workstations and servers are in 192.168.0.0/24 C class) edit. Anyway the WLAN iface has 10.0.0.1/24 address, and the wireless clients should be able to access only...
by dawam
Fri May 18, 2007 4:41 pm
Forum: General
Topic: Hotspot problem - 2 MTiks
Replies: 4
Views: 667

which interface did your set your hotspot server. set it at mtik hotspot wlan .this could be your problem.
by dawam
Fri May 18, 2007 2:47 pm
Forum: Wireless Networking
Topic: RB 112 as a Backbone and AP
Replies: 6
Views: 1125

I used RB112 for hotspot ap with no problem. I have a few with 2 radio, one for backhaul on 5GHz and wifi hotspot on the 2nd radio. Further down I got few 532A as hotspot gateway and further down usermanager as radius. connected thru point-to-point also on rb112. Rb112 config only as AP, no firewall...
by dawam
Fri May 11, 2007 4:37 pm
Forum: Wireless Networking
Topic: Router won't talk to external RADIUS Server
Replies: 6
Views: 1267

I suspect you have same issue as this,

http://forum.mikrotik.com/viewtopic.php?t=14112
by dawam
Wed May 09, 2007 8:25 pm
Forum: Wireless Networking
Topic: RB 112 as a Backbone and AP
Replies: 6
Views: 1125

1. create a bridge on 2nd AP
2. add wlan1 and wlan2 to the bridge.
3. add IP address to bridge
by dawam
Sun Apr 08, 2007 7:38 am
Forum: General
Topic: Remove Messenger Worm on filter
Replies: 3
Views: 1024

Thanks GotNet, I am a novice to networking..and RouterOS. I was just wondering with so much activities on some ports maybe something can be done to stop it before it start to escalate or it was just a false alarms. I have gone thru the process of building the wireless ptp,ptmp, hotspot,webproxy, bri...
by dawam
Sat Apr 07, 2007 2:56 am
Forum: General
Topic: Remove Messenger Worm on filter
Replies: 3
Views: 1024

So no one is blocking this port ????

or

You are blocking the port and not seeing any activities
by dawam
Fri Apr 06, 2007 1:29 pm
Forum: General
Topic: Remove Messenger Worm on filter
Replies: 3
Views: 1024

Remove Messenger Worm on filter

We have a campus network working great with 100 % Mikrotik solution. My first implementation and I am not looking anywhere else for further deployment. We have filter implemented as per wiki, add chain=Virus protocol=udp dst-port=135-139 action=add-src-to-address-list \ address-list=virus address-li...
by dawam
Sun Mar 25, 2007 7:01 pm
Forum: General
Topic: Interesting Hotspot over bridge issue
Replies: 8
Views: 1608

Still could not resolve the issue, I could only access thru mac-telnet from the AP after hotspot gateway. Could not mac-telnet on RB532 on hotspot gateway. RB532 hotspot gateway seems to have high cpu - 100% when more than 30 hotspot users is active . I though processing is distributed to the downst...
by dawam
Fri Mar 23, 2007 2:54 pm
Forum: General
Topic: Running hotspot on bridge??
Replies: 5
Views: 1509

If you need more than one client-facing physical interface for the hotspot then you can bridge ports just like you did (but do NOT include the upstream interface in the bridge) --Tom How can this be made possible Tom, I have difficulty understanding this, But I think this could be the right design,...
by dawam
Sat Mar 10, 2007 2:50 pm
Forum: Scripting
Topic: Need quick script to bounce Interface
Replies: 7
Views: 2551

I got the same problem as you Intralink. Its RB532 on ether2, everytime after every reboot or power outage. Ether1 works find, backhaul thru wlan. RB is 400km away, might just replace the RB on my next visit using this script( found it somewhere in the forum) # check if no-link and enable # tested w...
by dawam
Sat Mar 10, 2007 12:00 am
Forum: Scripting
Topic: dns script
Replies: 13
Views: 3407

cmit,

If I could understand it and would like to learn from the experts.

Why do you need to put the dns cache into static list ? Is there a good reason for this ?

Does this mean the static list is lookup first then only the cache

Thanks,
by dawam
Thu Mar 01, 2007 9:13 pm
Forum: Wireless Networking
Topic: Simple MAC filter
Replies: 4
Views: 922

Ok found this post here by uldis http://forum.mikrotik.com/viewtopic.php?t=9684 2) If you have 'default-authentication=no', station checks connect-list. If there is not any suitable rule, station should not connect to any AP, until it would match connect-list entry. 3) I have to clarify my above pos...
by dawam
Thu Mar 01, 2007 6:32 pm
Forum: The User Manager
Topic: Wireless MAC authenication?
Replies: 8
Views: 2738

Re: Wireless MAC authenication?


Also, is anyone seeing issues with adding a customer or a router via the CLI and it not showing up in user manager in 2.9.40? (still there in CLI)
I got this issue on my router too.. Though it was only me. luckily its my house router.
by dawam
Thu Mar 01, 2007 6:18 pm
Forum: Wireless Networking
Topic: Simple MAC filter
Replies: 4
Views: 922

Note that Connect list is used for WDS connection instead of Aaccess list. uldis, I have 2 AP , BOTH set as AP-Bridge and WDS, would it be : AP-a would have AP-b in Access List & Connect List and AP-b would have AP-a in Access List & Connect List b'cos the need to connect to each other or one way i...
by dawam
Mon Feb 26, 2007 6:53 pm
Forum: General
Topic: Interesting Hotspot over bridge issue
Replies: 8
Views: 1608

| rb532----hotspot | |wired | 1. rb112(ap) ----wireless--------2.rb112(ap) wds | | | wired 3. rb112(ap)-------switch ----------4. rb112(ap) I have the above configuration. all rb112(ap) is ip binding passthru on rb532 I couldn't seem to be able to winbox or telnet from rb532, only the first rb112(a...
by dawam
Sat Feb 24, 2007 8:47 pm
Forum: The User Manager
Topic: radius not responding
Replies: 6
Views: 3877

Nikolaz, I had once the same mesage 'Radius not responding'. my IP for remote Radius was at 10.1.2.254. Hotspot server was at 10.1.1.11 routed thru 10.1.2.250 PtP link if I put Router Hotspot ip as 10.1.1.11 - Radius will not respond. but when Router Ip is set to 10.1.2.250 will work. Don't know you...
by dawam
Sat Feb 24, 2007 7:19 pm
Forum: Wireless Networking
Topic: Point to Point , what's possible with what hardware
Replies: 0
Views: 915

Point to Point , what's possible with what hardware

just would like to extend this thread http://forum.mikrotik.com/viewtopic.php?t=14047 so that we don't have to fill the forum with the same questions over and over again, and nice to have a reference if we need to build the same link distance. Can we put a sticky to this, please MT. acim I have 37Mb...
by dawam
Sat Feb 24, 2007 7:04 pm
Forum: Wireless Networking
Topic: point to point link 25 Km
Replies: 26
Views: 4602

Great Guys,

Maybe we have a sticky on what possible with what hardware.
At least we don't have to fill the forum asking the same questions.

Will post asking MT to do that..

ok here's the request.
http://forum.mikrotik.com/viewtopic.php?t=14117
by dawam
Fri Feb 23, 2007 6:51 pm
Forum: Wireless Networking
Topic: point to point link 25 Km
Replies: 26
Views: 4602

No, I am using SR5 on both sides in this case.
acim,

what the antenna gain? .. if you could share. its good to know what's possible with what hardware.

thx
by dawam
Thu Feb 22, 2007 4:53 pm
Forum: Wireless Networking
Topic: WPA2 EAP-IKEv2
Replies: 5
Views: 2126

ok , thanks for the confirmations

thought I was missing something
by dawam
Thu Feb 22, 2007 4:42 pm
Forum: Wireless Networking
Topic: WPA2 EAP-IKEv2
Replies: 5
Views: 2126

RouterOS supports 'eap-method=passtrough' that moves EAP authentication to RADIUS server, appropriate configuration on RADIUS server required to provide the following EAP authentication for clients. RouterOS AP is acting as relay between client and RADIUS server. If you will set correct configurati...
by dawam
Thu Feb 15, 2007 4:55 pm
Forum: General
Topic: D18 J3/J4 and 48vDC
Replies: 4
Views: 1139

by dawam
Tue Feb 06, 2007 11:42 pm
Forum: General
Topic: Up&Down unlimit from WebProxy.
Replies: 10
Views: 1717

0 ;;; Proxy marking chain=output out-interface=lan1 dst-address=192.168.4.0/24 protocol=tcp action=mark-packet new-packet-mark=proxymark passthrough=no 1 ;;; Internet marking chain=input in-interface=public protocol=tcp action=mark-packet new-packet-mark=publicinputmark passthrough=no so if your ma...
by dawam
Tue Nov 21, 2006 7:17 pm
Forum: General
Topic: GIS/WISPr xml pages for hotspot smart client support 2.9.36
Replies: 4
Views: 2402

GIS/WISPr xml pages for hotspot smart client support 2.9.36

added GIS/WISPr xml pages for hotspot smart client support; IPass support?! Fantastic. Just in time too. FYI http://www.pcca.org/standards/architecture/ipass_pwlan.pdf and here http://www.networkworld.com/news/2002/1104wspr.html?page=1 still doing some googling and yahooing.. anyone have done this,...
by dawam
Wed Nov 15, 2006 8:04 pm
Forum: General
Topic: VSWR Reading
Replies: 1
Views: 1464

VSWR Reading

would it be possible to have VSWR reading on the wireless. from http://en.wikipedia.org/wiki/VSWR SWR has a number of implications that are directly applicable to radio use. SWR is an indicator of reflected waves bouncing back and forth within the transmission line, and as such, an increase in SWR c...
by dawam
Wed Nov 15, 2006 7:51 pm
Forum: General
Topic: Forum issues - revist
Replies: 35
Views: 5513

works ok here GMT +8.

yes it was bad 1st week of Nov
by dawam
Wed Nov 15, 2006 9:57 am
Forum: The User Manager
Topic: Traying to understand userman (closed)
Replies: 4
Views: 1946

they want to connect to the internet they will need to enter a valid username and password.
try to setup hotspot , I believe this is what you need
by dawam
Tue Nov 07, 2006 8:19 pm
Forum: General
Topic: question form keep the site
Replies: 13
Views: 2082

try this

replace http://www.22z.net with *222z*
by dawam
Tue Nov 07, 2006 6:52 am
Forum: General
Topic: mangle rule statistics in graphs howto ?
Replies: 7
Views: 1921

shouldn't

tool -> graphing -> queue rules

do the job
by dawam
Wed Sep 27, 2006 6:47 am
Forum: General
Topic: Web cache not working... (image included)... any suggestions
Replies: 2
Views: 1338

I have problem when using web-proxy package. Sometime works.. but when you open multiple instance of the web browser url just timeout. I am using IP proxy package now, work like a charm for few days now ip proxy is faster compare to ip web-proxy.. enable web-proxy test package to used it. / ip proxy...
by dawam
Thu Sep 21, 2006 10:20 pm
Forum: General
Topic: Hotspot / webbox
Replies: 2
Views: 1181

I configure PPPOE Server and dial in using PPOE to access winbox.
by dawam
Wed Sep 20, 2006 7:13 pm
Forum: General
Topic: UTP Cable max length to RB112
Replies: 9
Views: 2741

Was searching for Rb112 spec. Ya , the RB112 spec did mention " boards are compliant with IEEE802.3af Power over Ethernet standard (except power over datalines) and accept 48V powering over up to 100m (330 ft) long Ethernet cable connected to the Ethernet port (J5 or J6)." I can connect with shorter...
by dawam
Wed Sep 20, 2006 6:42 pm
Forum: General
Topic: UTP Cable max length to RB112
Replies: 9
Views: 2741

Sten,

what did you mean??
by dawam
Wed Sep 20, 2006 6:31 pm
Forum: General
Topic: UTP Cable max length to RB112
Replies: 9
Views: 2741

HarvSki, Thanks for sharing. 100m, that's what I thought.. I am using Dlink 48V 400ma POE . Like I mention , I did even plug in direct the Mikrotik 18V supply direct to the RB power inlet and access the data thru the 40m UTP still problem. I have been trying to shorted the cable path till I get slig...
by dawam
Wed Sep 20, 2006 6:08 pm
Forum: General
Topic: UTP Cable max length to RB112
Replies: 9
Views: 2741

UTP Cable max length to RB112

What the max UTP length possible Tried 40metre intermittent problem. cannot reach RB 112 Set Ether speed to 10Mbps Set Auto negotiate = no Using Shielded 24AWG AMP(branded) STP cable. Using POE .. even tried to put Mikrotik 18v Power Suppy direct on RB112 and access data on the 40m cable still probl...