Community discussions

MUM Europe 2020

Search found 35 matches

by acidsas
Thu Mar 09, 2017 3:18 pm
Forum: General
Topic: Intel 82599ES 10Gig card and SFP+ modules compatibility
Replies: 6
Views: 5094

Re: Intel 82599ES 10Gig card and SFP+ modules compatibility

Strange enough,

how is it running under Linux, with same SFP+ transceivers that don't want to work under RouterOS?
Could you update on this issue? Did Mikrotik enable ixgbe allow_unsupported_sfp=1,1 in ROS?
by acidsas
Tue Jan 24, 2017 2:37 pm
Forum: General
Topic: ROS6.38 IKEv2+LocalAuth VPN
Replies: 13
Views: 8347

Re: ROS6.38 IKEv2+LocalAuth VPN

Here is my config for IPSec. Works with Mac OS & iOS. /ip ipsec mode-config add address-pool=ipsec name=ipsec split-include=192.168.1.0/24 /ip ipsec policy group add name=ipsec /ip ipsec proposal add enc-algorithms=aes-256-cbc,aes-128-cbc lifetime=8h name=ios pfs-group=none /ip ipsec peer add addres...
by acidsas
Mon Jan 23, 2017 6:31 pm
Forum: General
Topic: ROS6.38 IKEv2+LocalAuth VPN
Replies: 13
Views: 8347

Re: ROS6.38.1 IKEv2+LocalAuth VPN

You can use either Apple Configurator to create custom config with disabled EAP, or use settings shown in screenshots from our manual
Could you provide a link for a manual with screenshots?
by acidsas
Mon Jan 23, 2017 4:41 pm
Forum: General
Topic: ROS6.38 IKEv2+LocalAuth VPN
Replies: 13
Views: 8347

Re: ROS6.38 IKEv2+LocalAuth VPN

I was away for sometime. I'll post IPSec configure later today.
by acidsas
Thu Jan 19, 2017 3:48 pm
Forum: General
Topic: ROS6.38 IKEv2+LocalAuth VPN
Replies: 13
Views: 8347

Re: ROS6.38 IKEv2+LocalAuth VPN

It was added to 6.38.1.

I'm also interested in setup for Apple iOS & Mac OS. Currently running IPSec with xauth.
by acidsas
Thu May 12, 2016 12:46 pm
Forum: Announcements
Topic: v6.35.2 [current] is released!
Replies: 64
Views: 25357

Re: v6.35.2 [current] is released!

Something strange is going on with ether5 on RB750GL. Port 5 is disconnected, but there is a lot of traffic according to counters. Up to 40Gbit per second :)
I'll mail support to support.
by acidsas
Sat Jan 30, 2016 5:05 pm
Forum: General
Topic: Feature request: use custom password or mac as password for DHCP radius.
Replies: 0
Views: 571

Feature request: use custom password or mac as password for DHCP radius.

Hello!

Current implementation of radius for dhcp server sends empty password as access-request.
It would be nice if we could choose to use mac as password or custom string like in hotspot.
by acidsas
Tue Jan 19, 2016 1:59 pm
Forum: General
Topic: Total PPPoE crashing with CCR1072 and x86 - With all RouterOS 6.3x.xx versions available
Replies: 33
Views: 4228

Re: Total PPPoE crashing with CCR1072 and x86 - With all RouterOS 6.3x.xx versions available

I can tell you even more... /ppp active print in console also triggers the issue. :(
As I've mentioned before, you can use ppp interfaces instead of active.
by acidsas
Mon Jan 18, 2016 7:20 pm
Forum: General
Topic: CHR performance in AWS?
Replies: 2
Views: 1085

Re: CHR performance in AWS?

CHR is currently limited to 1Mbit at each interface.
by acidsas
Mon Jan 18, 2016 7:16 pm
Forum: General
Topic: Need RB2011 dimensions (height is missing)??
Replies: 4
Views: 757

Re: Need RB2011 dimensions (height is missing)??

SFP port is an independent port connected to internal gig switch. Look at block diagram — http://i.mt.lv/routerboard/files/Block-RB2011.pdf
BTW, 3011 got all gig ports.
by acidsas
Mon Jan 18, 2016 7:06 pm
Forum: General
Topic: Strange Issue with BCP
Replies: 1
Views: 313

Re: Strange Issue with BCP

99% it's mtu issue. Try lowering your MTU and MRU. Also enable "Change TCP MSS" at General tab of ppp profile.
by acidsas
Mon Jan 18, 2016 6:19 pm
Forum: General
Topic: Total PPPoE crashing with CCR1072 and x86 - With all RouterOS 6.3x.xx versions available
Replies: 33
Views: 4228

Re: Total PPPoE crashing with CCR1072 and x86 - With all RouterOS 6.3x.xx versions available

We have the same experience since first versions of ROS v6 on x86 and different CCRs. Accessing active tab on PPP menu in Winbox sometimes crashes ppp (pptp/l2tp/pppoe/etc ppp) connections with radius auth. I've did numerous supouts, email support but didn't get a reply stating that it is a long tim...
by acidsas
Tue Dec 22, 2015 9:54 pm
Forum: General
Topic: Mikrotik RB260GSP switch and Rocket AC lite.
Replies: 0
Views: 1063

Mikrotik RB260GSP switch and Rocket AC lite.

Hey! Today I've plugged ubnt's Rocket AC Lite into RB260GSP and it didn't power up. Looking at original PoE I've found that wires 4 & 5 are + and 3,6,7,8 are - (return). Is there any way to power Rocket AC Lite with RB260GSP? P.S. Mikrotik Gigabit PoE powers up rocket ac lite, but ethernet link goes...
by acidsas
Wed Aug 26, 2015 12:43 am
Forum: Forwarding Protocols
Topic: How do I forward BGP routes to another mikrotik?
Replies: 6
Views: 1058

Re: How do I forward BGP routes to another mikrotik?

shaoranrch thnx for your solution but I did it another way :) I've set Route Targets with filters on routes received from PEER 3 and matched these targets with filters for the hosts B & C. Diagram was a really simple example. I've got an extensive bgp configuration with 3 instances and 12 BGP peers...
by acidsas
Tue Aug 25, 2015 1:05 pm
Forum: Forwarding Protocols
Topic: How do I forward BGP routes to another mikrotik?
Replies: 6
Views: 1058

Re: How do I forward BGP routes to another mikrotik?

shaoranrch thnx for your solution but I did it another way :) I've set Route Targets with filters on routes received from PEER 3 and matched these targets with filters for the hosts B & C. Diagram was a really simple example. I've got an extensive bgp configuration with 3 instances and 12 BGP peers...
by acidsas
Mon Aug 24, 2015 7:12 pm
Forum: Forwarding Protocols
Topic: How do I forward BGP routes to another mikrotik?
Replies: 6
Views: 1058

Re: How do I forward BGP routes to another mikrotik?

eBGP I don't need to forward routes received from peer 1 & peer 2, only routes received from peer 3. I've tried to set a comment "123" on routes received from peer 3 with filters and set an outbound filter for host b to match only routes with comment 123 and accept them and discard everything else. ...
by acidsas
Mon Aug 24, 2015 4:13 pm
Forum: Forwarding Protocols
Topic: How do I forward BGP routes to another mikrotik?
Replies: 6
Views: 1058

How do I forward BGP routes to another mikrotik?

Please take a look at attached diagram. I have a 3 mikrotiks connected by GRE tunnel over private circuits (host a, host b & host c). There is a BGP session between host a & host b and host a & host c. Host A got 3 external BGP peers. Two of them are full table bgp peers (peer 1 & peer 2) and peer 3...
by acidsas
Wed May 27, 2015 1:05 pm
Forum: General
Topic: Is there a limit on the amount of mac cookies?
Replies: 1
Views: 331

Is there a limit on the amount of mac cookies?

Hello!

I'm running ROS 6.28 on CCR1016 and hotspot with mac cookies. It seems, that there is a limit on saved mac cookies. I can't get more than 136 mac cookies saved. Is there any way to increase the amount of cookies saved?
by acidsas
Wed Feb 25, 2015 10:09 pm
Forum: General
Topic: No fast path on bridge?
Replies: 9
Views: 5028

Re: No fast path on bridge?

VLAN is the cause. Here is what support told me: Hello, Currently VLANs doesn't have fast-path support. It is in our to do list, but currently the interest about this feature is low, so we are busy implementing other more demanded features. Your request is noted. Regards, Janis M. We can close the t...
by acidsas
Wed Feb 25, 2015 12:12 pm
Forum: Announcements
Topic: hAP lite
Replies: 391
Views: 166736

Re: hAP lite

AFAIK, SMIPS is Simple MIPS from MIT, a subset of MIPS II This might explain why it is less performing at more MHz it is not performing "less", it is faster. test contains mistake that will be fixed. here, look at the values and compare, anything suspicious? 173,6kpps=88,9Mbps RB951-2nD 146kpps=96,...
by acidsas
Tue Feb 24, 2015 12:10 pm
Forum: General
Topic: No fast path on bridge?
Replies: 9
Views: 5028

Re: No fast path on bridge?

Make sure that you have wireless-fp (fastpath) package enabled.
It's an AC device, so only wireless-fp is available.
P.S. Didn't pay attention before... Could the vlan on the bridge be the cause of disabled fast path?
@normis, anyone?
by acidsas
Tue Feb 24, 2015 12:02 pm
Forum: General
Topic: No fast path on bridge?
Replies: 9
Views: 5028

Re: No fast path on bridge?

Here is my config.Pretty simple. /interface bridge add mtu=1500 name=bridge1 /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=20/40mhz-Ce disabled=no frequency=5xxx frequency-mode=superchannel guard-interval=long hw-retries=15 l2mtu=1600 mode=ap-bridge multicast-hel...
by acidsas
Mon Feb 23, 2015 6:10 pm
Forum: Announcements
Topic: hAP lite
Replies: 391
Views: 166736

Re: hAP lite

notice that the hAP has 4 ports, but the 951 has 5 ports. this is why the hAP can only achieve 400Mbit.

also there is a mistake in the table, during conversion from packets to bits. we will fix it today
I was talking about 64byte packet performance. 951-2n got higher rates.
by acidsas
Sun Feb 22, 2015 9:29 pm
Forum: Announcements
Topic: hAP lite
Replies: 391
Views: 166736

Re: hAP lite

Read the pdf. It is not very hard.
I did. But ros versions are different and my question was about real life results and not the synthetic test results. It's hardly believable that 650mhz is slower than 400mhz. Frequency is more than 50% higher.
by acidsas
Sun Feb 22, 2015 8:46 pm
Forum: Announcements
Topic: hAP lite
Replies: 391
Views: 166736

Re: hAP lite

Is it really slower than 951-2n in terms of cpu power (nat & routing)? How much real throughput should be expected with regular soho usage?
by acidsas
Fri Feb 20, 2015 7:43 pm
Forum: General
Topic: No fast path on bridge?
Replies: 9
Views: 5028

Re: No fast path on bridge?

Whoops, I've replied to your original post :)

All the requirements are met for the fast path. I'll post config a little later.
by acidsas
Fri Feb 20, 2015 7:41 pm
Forum: General
Topic: No fast path on bridge?
Replies: 9
Views: 5028

Re: No fast path on bridge?

Obviously fast path not work on software bridge if you activate firewall or other settings than disable fast-path. Full config? Are you sure? Here is a quote from wiki: Bridge handler Bridge fast path is automatically used if following conditions are met: no bridge firewall rules (/interface bridge...
by acidsas
Fri Feb 20, 2015 7:25 pm
Forum: General
Topic: No fast path on bridge?
Replies: 9
Views: 5028

No fast path on bridge?

Hello! I have a RB922UAGS as a plain wireless bridge. No firewall, nothing running on it. Just a plain WDS bridge. And I don't get why fast path isn't available on the bridge? [admin@MikroTik] > /interface print detail Flags: D - dynamic, X - disabled, R - running, S - slave 0 S name="ether1" defaul...
by acidsas
Wed Feb 18, 2015 4:45 pm
Forum: Scripting
Topic: Simple queue burst set from radius
Replies: 8
Views: 3369

Re: Simple queue burst set from radius

I know a lot of time have passed, but if you still interested ...
"Framed-IP-Address=172.24.54.15,Mikrotik-Rate-Limit='64k/64k 256k/256k 128k/128k 10/10'"
Works well!
by acidsas
Sun Jan 25, 2015 5:04 pm
Forum: General
Topic: What are the hotspot option on firewall?
Replies: 0
Views: 301

What are the hotspot option on firewall?

Hi!
I'm trying to overcome some issues with Apple CNA and hotspot and can't find anywhere info on the following options in firewall filter under hotspot:
hotspot (auth | from-client | http | local-dst | to-client;)

I'll really appreciate your reply!
by acidsas
Wed May 22, 2013 4:12 pm
Forum: General
Topic: No switch tab in webfig on rb951-2n.
Replies: 0
Views: 373

No switch tab in webfig on rb951-2n.

ROS 6.0. There is no Switch tab in Webfig, also there is no way to set master port for switching, port bandwidth thru web fig. All the fields and switch tab are present in Winbox. I've used Safari & Firefox to access webfig. Every field and switch tab are present in webfig on RB750, RB2011UAS with R...
by acidsas
Wed May 22, 2013 10:47 am
Forum: General
Topic: rb951-2n hardware
Replies: 2
Views: 663

Re: rb951-2n hardware

Thnx for your reply
by acidsas
Tue May 21, 2013 10:39 pm
Forum: General
Topic: rb951-2n hardware
Replies: 2
Views: 663

rb951-2n hardware

Just unpacked brand new rb951-2n, flashed ros 6.0 and I see 64Mb RAM. New revision? https://www.evernote.com/shard/s6/sh/d3bf67b0-32e3-4e95-94ab-d6a7bafbf92b/275f252b4f4939fe0cbb193c28127f81/deep/0/admin@D4:CA:6D:93:C2:B8%20(MikroTik)%20-%20WinBox%20v6.0%20on%20RB951-2n%20(mipsbe).png Click for larg...
by acidsas
Tue May 21, 2013 5:10 pm
Forum: General
Topic: Migration from linux to Mikrotik firewall
Replies: 1
Views: 572

Migration from linux to Mikrotik firewall

Hello! Please give me a hand with understanding firewall in depth. I need to mark incoming and outgoing packets based on source ip and interface to use them with queues. It could be done in two ways. Which one is better from performance side of view? chain=forward action=mark-connection new-connecti...