Community discussions

Search found 39 matches

by santong7
Thu Aug 02, 2018 11:34 am
Forum: Useful user articles
Topic: Using Splunk to analyse MikroTik logs 2.7 (Graphing everything) Topic is solved
Replies: 222
Views: 67709

Re: Using Splunk to analyse MikroTik logs 2.2 (Graphing everything) Topic is solved

No idea why it stops working. I have run Splunk for years without it stopping by it self, always using Ubuntu Server. Maybe there are some other stuff/software on you Ubuntu that kills it. Finally there is a problem with timestamp, found on splunkd.log 08-01-2018 15:52:07.610 +0300 WARN DateParserV...
by santong7
Tue Jul 31, 2018 10:56 am
Forum: Useful user articles
Topic: Using Splunk to analyse MikroTik logs 2.7 (Graphing everything) Topic is solved
Replies: 222
Views: 67709

Re: Using Splunk to analyse MikroTik logs 2.2 (Graphing everything) Topic is solved

File is there now, se this post why it was missing: https://forum.mikrotik.com/viewtopic.php?f=2&t=137476 Not sure why you have problem with Splunk. I have used it for many years and its for me very stable. Test a PC with Ubuntu 18.04 and Splunk. Should work very vell together. Windows should be ok...
by santong7
Tue Jul 31, 2018 9:28 am
Forum: Useful user articles
Topic: Using Splunk to analyse MikroTik logs 2.7 (Graphing everything) Topic is solved
Replies: 222
Views: 67709

Re: Using Splunk to analyse MikroTik logs 2.2 (Graphing everything) Topic is solved

Where is the zip file ?

Do you have any clue why splunk linux stops logging after a while, and with splunk server restart it starts again and then after a while it stops again until the next splunk server restart ?

Same happens with windows splunk version.
by santong7
Tue Jul 17, 2018 10:21 pm
Forum: General
Topic: Weird Lan behaviour with RB750Gr3
Replies: 11
Views: 684

Re: Weird Lan behaviour with RB750Gr3

For a start, disable all rules that refer to your L7 filters! Such filters are completely impossible to debug remotely. When your device has problems, check locally what its network settings are. You should see the config from your DHCP server (gw 192.168.0.1 and those 2 DNS servers). If not, you h...
by santong7
Thu Jul 12, 2018 2:03 pm
Forum: General
Topic: Weird Lan behaviour with RB750Gr3
Replies: 11
Views: 684

Re: Weird Lan behaviour with RB750Gr3

Yes but why when reverting to ISP's router, everything works normal. Here is my whole conf /interface ethernet set [ find default-name=ether1 ] name=ether1-WAN1 set [ find default-name=ether2 ] name=ether2-WAN2 set [ find default-name=ether3 ] disabled=yes set [ find default-name=ether4 ] disabled=y...
by santong7
Thu Jul 12, 2018 1:24 pm
Forum: General
Topic: Weird Lan behaviour with RB750Gr3
Replies: 11
Views: 684

Re: Weird Lan behaviour with RB750Gr3

LB is not necessary. The PDAs are accessing a web page on IIS locally hosted on a server on the same LAN. Here is my mangle conf. 0 chain=prerouting action=accept dst-address=192.168.0.0/24 log=no log-prefix="" 1 chain=prerouting action=accept in-interface=pppoe-CYTA1 2 chain=prerouting action=accep...
by santong7
Thu Jul 12, 2018 12:46 pm
Forum: General
Topic: Weird Lan behaviour with RB750Gr3
Replies: 11
Views: 684

Re: Weird Lan behaviour with RB750Gr3

I am desperate and cannot find the cause of the problem in RB750.
The problem on the PDAs, is random, every day one or two different PDAs cannot access the server, on different places via different Groove WiFi AP.
When we used the ISP's router we didn't have any issues at all.
by santong7
Thu Jul 12, 2018 8:13 am
Forum: General
Topic: Weird Lan behaviour with RB750Gr3
Replies: 11
Views: 684

Re: Weird Lan behaviour with RB750Gr3

Yes there are several switches.
Why?
by santong7
Wed Jul 11, 2018 8:44 pm
Forum: General
Topic: Weird Lan behaviour with RB750Gr3
Replies: 11
Views: 684

Weird Lan behaviour with RB750Gr3

Hello everybody. I would like to ask you a question. I have configured a RB750Gr3 as a load balancer with PPC mangle rules via pppoe wan interfaces (adsl routers in bridge mode) The lan is configured via one ether port (no bridge) with ARP enabled, dhcp server on that interface, also DNS allows remo...
by santong7
Fri Aug 18, 2017 12:36 pm
Forum: General
Topic: 2 WAN PPPOE LOAD BALANCER
Replies: 5
Views: 5856

Re: 2 WAN PPPOE LOAD BALANCER

Thank you again
by santong7
Fri Aug 18, 2017 10:17 am
Forum: General
Topic: 2 WAN PPPOE LOAD BALANCER
Replies: 5
Views: 5856

Re: 2 WAN PPPOE LOAD BALANCER

Thank you Syed Does your sample config solves issues with the routing of secure websites with 2 factor authentication? I mean do I have to mark https traffic and route it to other gateways as shown below /ip firewall mangle add action=mark-routing chain=prerouting disabled=no dst-port=443 \ new-rout...
by santong7
Wed Aug 16, 2017 10:46 am
Forum: General
Topic: 2 WAN PPPOE LOAD BALANCER
Replies: 5
Views: 5856

2 WAN PPPOE LOAD BALANCER

I have 2 WANs via PPPOE client and I want to establish a load balancer I have used the following code /ip firewall mangle add chain=prerouting dst-address-list=MEGARON src-address-list=MEGARON /ip firewall mangle add action=mark-connection chain=forward connection-mark=no-mark \ in-interface=pppoe-C...
by santong7
Wed May 03, 2017 12:48 am
Forum: General
Topic: Firewal: Block P2P on ROS 6.39
Replies: 1
Views: 5860

Firewal: Block P2P on ROS 6.39

After upgrade to ROS 6.39 I noticed that the rule of P2P matcher has become obsolete and to use layer 7 matcher instead.
Has someone find anything equivalent to suggest ?
by santong7
Mon Jan 30, 2017 9:52 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 288
Views: 301039

Re: Tool: Realtime per IP traffic monitor for home/office

Thank you Daniel for your great tool. I would like to suggest you something. Is it possible to configure the same tool, to show you the CAPSMAN registration table tab, instead of showing the ip and the data. I mean to show the cap, the ssid, the mac address, the hostname and the transferred data ? T...
by santong7
Mon Oct 17, 2016 3:31 pm
Forum: General
Topic: USB LTE K5160 / RB951G support
Replies: 20
Views: 4495

Re: USB LTE K5160 / RB951G support

I can see the interface lte1 interface (ROS 6.37.1) but PPP client shows unknown interface . I have an old RB751U-2HnD The stick works when it is behind NAT from the cellular ISP with dhcp client interface on the lte1 interface. But I asked from the ISP to remove their NAT and give me direct ip on t...
by santong7
Fri Jul 29, 2016 10:29 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 41243

Re: v6.36 [current] is released!

Mobile Tik-App for Android began to crash immediately after login to 6.36 upgraded devices. 6.35.4 worked OK . Many routers -- RB750UP, RB951U, RB2011, HAP lite. Please check, confirm and fix something. Thanks in advance. Hello, What phone are you using? Are you able connect to demo.mt.lv and demo2...
by santong7
Tue Apr 12, 2016 11:31 pm
Forum: Wireless Networking
Topic: HEX POE LITE
Replies: 0
Views: 614

HEX POE LITE

Has anyone tested this product configured as a caps manager and a router ? My config is hex poe lite as a caps manager (to manage 3 CAP rb951ui-2hnd with its POE power supply) with dhcp server, dns server, 25 firewall lines, and bandwidth limiter with 5 mangle rules. The maximum wifi clients will be...
by santong7
Tue Apr 05, 2016 11:11 pm
Forum: Wireless Networking
Topic: POE supply for 3 x 951Ui-2HnD
Replies: 3
Views: 617

Re: POE supply for 3 x 951Ui-2HnD

Yes chechito you understood right. I am planning to use an UBIQUITI POE-24-24 (24V, 1A, 24W). The only limitation is the 500mA of the ether5 output, which is on the limit of each RB (8W divided by 24V = 0.333A), so the first one is going to supply the other two with 0.666A > 0.5A of the ether5. I wi...
by santong7
Mon Apr 04, 2016 7:42 pm
Forum: Wireless Networking
Topic: POE supply for 3 x 951Ui-2HnD
Replies: 3
Views: 617

POE supply for 3 x 951Ui-2HnD

Has anyone managed to achieve the following. I want to install 3 pieces of 951Ui-2HnD on the same network, the 2 will be configured as CAP and the other will be guest router and the CAPS Manager with its wifi interface as CAP. The wan will be an adsl router with its own dhcp server in another area c...
by santong7
Fri Nov 06, 2015 3:21 pm
Forum: General
Topic: PORT FORWARDING TO INNER NETWORK
Replies: 2
Views: 520

PORT FORWARDING TO INNER NETWORK

Does anyone know how to port forward to the mikrotik's inner network. My configuration is as follows. I have an adsl modem router with ppoe enabled (not in bridge mode) with the 192.168.0.1/24 dhcp network, and the mikrotik it is connected on it with the 192.168.1.2 ip address which is used also as ...
by santong7
Tue Sep 22, 2015 2:02 pm
Forum: General
Topic: PPTP VPN & OVPN through secondary PPOE Wan interface
Replies: 0
Views: 289

PPTP VPN & OVPN through secondary PPOE Wan interface

I already have ppc load balancer with 2 adsl lines (using pppoe) and I have pptp and opvpn configured and they work properly. The PPTP and OPVPN is used to connect to my LAN from remote sites. I want to remove the ppc balancer (mangle rules) completely and dedicate the one adsl line for the internet...
by santong7
Thu Jul 23, 2015 11:27 am
Forum: General
Topic: Hotspot issue with registered users
Replies: 0
Views: 381

Hotspot issue with registered users

I have a latest ros hotspot mikrotik device, with several groove ap managed by caps in the same rb (1200AHx2). The hotspot works fine but I have issues with the clients. They complain that they have to enter the credentials multiple times during the day. The hotspot main config is : /ip hotspot prof...
by santong7
Wed Jul 22, 2015 9:58 am
Forum: Wireless Networking
Topic: Ubiquity Nano Station Loco M5 p2p link with 2.4ghz mikrotik AP
Replies: 3
Views: 1204

Re: Ubiquity Nano Station Loco M5 p2p link with 2.4ghz mikrotik AP

Looks like L2 is being blocked somewhere. Are the Locos setup as AP or station WDS?
They are configured as AP
by santong7
Tue Jul 21, 2015 10:43 am
Forum: Wireless Networking
Topic: Ubiquity Nano Station Loco M5 p2p link with 2.4ghz mikrotik AP
Replies: 3
Views: 1204

Ubiquity Nano Station Loco M5 p2p link with 2.4ghz mikrotik AP

Hello guys this is my config. I have a pair of Ubiquiti Nanostation loco m5 in bridge mode configuration (airmax enabled) which I am using them to connect to buildings via p2p wireless link. On the remote 1 building I have 2 SXT G-2HnD configured as AP bridge. On the main building I have RB2011UiAs ...
by santong7
Thu Jun 04, 2015 3:17 pm
Forum: General
Topic: Apple iphone issues with hotspot captive portal
Replies: 5
Views: 2542

I have cookies enabled.

The problem is happening mostly when the user is automatically changing AP (all AP are mikrotik groove ethernet connected quick configured as wisp in bridge mode, they are all on the same ssid with auto channel).
by santong7
Wed Jun 03, 2015 6:40 pm
Forum: General
Topic: Apple iphone issues with hotspot captive portal
Replies: 5
Views: 2542

Apple iphone issues with hotspot captive portal

Which one of the timeouts you mean to set at 8h ?
by santong7
Wed Jun 03, 2015 4:49 pm
Forum: General
Topic: Apple iphone issues with hotspot captive portal
Replies: 5
Views: 2542

Apple iphone issues with hotspot captive portal

Has anyone noticed issues with apple devices registered to captive portal - hotspot of a mikrotik RB1100AHx2 ? The devices are getting connected through the captive portal after entering the credentials and after a while they are getting prompted to input the credentials again. This happens only on ...
by santong7
Thu May 07, 2015 9:53 am
Forum: General
Topic: RouterOS problem with multiple IP networks on the same medium
Replies: 4
Views: 582

Re: RouterOS problem with multiple IP networks on the same medium

..All interfaces are configured as proxy-arp..

Why?
I am using pptp vpn in order to manage devices on all subnets remotely

So proxy-arp on bridge1, bridge2 and ether9 ..not "all" interfaces, right?
Yes correct, bridge1, bridge2 and ether9
by santong7
Thu May 07, 2015 9:26 am
Forum: General
Topic: RouterOS problem with multiple IP networks on the same medium
Replies: 4
Views: 582

Re: RouterOS problem with multiple IP networks on the same medium

..All interfaces are configured as proxy-arp..

Why?
I am using pptp vpn in order to manage devices on all subnets remotely
by santong7
Wed May 06, 2015 7:22 pm
Forum: General
Topic: RouterOS problem with multiple IP networks on the same medium
Replies: 4
Views: 582

RouterOS problem with multiple IP networks on the same medium

Recently, I configured a RB1100Ahx2 to work and provide multiple network on different interfaces. Ether1 & 2 are bridged in bridge1 and work in a 10.0.0.0/19 network with hotspot enabled. Ether6,7 & 8 are bridged in bridge2 and work in a 192.168.1.0/24 network. Ether9 is configured in 192.168.88.0/2...
by santong7
Thu Jul 03, 2014 4:39 pm
Forum: General
Topic: VPN PPTP
Replies: 0
Views: 837

VPN PPTP

I would like to know how to route traffic from a pptp win 7 client connected to an rb951G-2hnd (pptp server) to a remote dekstop server session via pppoe adsl. The remote desktop server 192.168.0.12 is on a switch with a cyberoam cr50i device as a gateway 192.168.0.254. The rb951 is connected to the...
by santong7
Tue Feb 18, 2014 4:24 pm
Forum: Wireless Networking
Topic: tplink tl-wn722 usb with RB751u-2hnd
Replies: 5
Views: 1840

Re: tplink tl-wn722 usb with RB751u-2hnd

What channel do you use on TPLINK? And what channel on rb751? I am using a different one, but I think that the rb751 has some issues, because I tried to use it as an AP without the usb wifi connected and I have low speed tests with speedtest.net (1,5mbits max). When I am using a RB951-2n I get the ...
by santong7
Tue Feb 18, 2014 1:36 pm
Forum: Wireless Networking
Topic: tplink tl-wn722 usb with RB751u-2hnd
Replies: 5
Views: 1840

Re: tplink tl-wn722 usb with RB751u-2hnd

Finally it works but I have low data rates with the onboard rb wireless interface.
by santong7
Wed Dec 11, 2013 11:15 am
Forum: Wireless Networking
Topic: tplink tl-wn722 usb with RB751u-2hnd
Replies: 5
Views: 1840

tplink tl-wn722 usb with RB751u-2hnd

The RB751u-2hnd recognises my usb tplink tl-wn722 Atheros AR9271 with the 5.26 version. I want to use the usb wifi interface to connect with a wifi network in client mode and then bridge the usb interface with the RB751u-2hnd built in interface and use it as an AP. The moment that I put the wifi int...
by santong7
Thu Dec 05, 2013 2:02 pm
Forum: General
Topic: Limit ether interfaces (wans)
Replies: 1
Views: 499

Limit ether interfaces (wans)

I have an RB1100AHx2 configured with a hotspot which uses 2 wan interfaces (connected to adsl modems) and they are used with PPC load balancer on the hotspot. The first one is 12Mbit down and 1.8Mbit up and the other one is 16Mbit down and 0.8Mbit up. I would like to limit them and especially the up...
by santong7
Fri Sep 13, 2013 2:21 pm
Forum: The Dude
Topic: Dude installed in RB1100AH as a package
Replies: 1
Views: 1199

Dude installed in RB1100AH as a package

Does anyone know how the dude server installed in a RB 1100AH (5.25) as a package can be accessed from WAN ?
From LAN is accessed.
Which ports do I have to open on the wan router , and which ports to allow on firewall ?
by santong7
Fri Sep 06, 2013 9:16 am
Forum: Wireless Networking
Topic: Mikrotik RB device as a repeater (no WDS)
Replies: 4
Views: 1390

Re: Mikrotik RB device as a repeater (no WDS)

Hello you can use both wireless interfaces as you want, station or AP. so, Yes, you can use it as "repeater", as long as you bridge these 2 interfaces. and yes, you need external antennas Can I bridge the 2 interfaces in 2.4GHz mode ? Μπορούμε να μιλάμε και Ελληνικά αλλά καλό λόγω forum να μείνουμε...
by santong7
Thu Sep 05, 2013 3:23 pm
Forum: Wireless Networking
Topic: Mikrotik RB device as a repeater (no WDS)
Replies: 4
Views: 1390

Re: Mikrotik RB device as a repeater (no WDS)

Hello

you can use both wireless interfaces as you want, station or AP.
so, Yes, you can use it as "repeater", as long as you bridge these 2 interfaces.

and yes, you need external antennas
Can I bridge the 2 interfaces in 2.4GHz mode ?
by santong7
Wed Sep 04, 2013 4:36 pm
Forum: Wireless Networking
Topic: Mikrotik RB device as a repeater (no WDS)
Replies: 4
Views: 1390

Mikrotik RB device as a repeater (no WDS)

Does anyone know if the Routerboard RB411AR supports simultaneously the built in 2.4Ghz interface for accepting the wifi clients, and the mini pci R52nM 2.4Ghz inerface for doing the repeating of a wifi channel ? I want to use the R52nM to connect to a wifi internet channel from an outdoor Bullet2 (...