MikroTik

santong7

Hello, community, I have a case where iPhone and ipad devices lose network connectivity (not signal) on a capsman network at random times. Moreover suddenly somehow disconnect form wifi, but they show full wifi signal on screen, and can't ping any IP, even local. The connectivity is established agai...

santong7

Dear community, I have RBwAPG-5HacT2HnD RB750Gr3 and for wireless, I use the new Cap XL connected to 750Gr3 via switch (not direct). In the past, I used the wAP AC (old revision). I have multiple links down on the 5GHz interface and fewer on the 2.4GHz interface. The same was also when I used the wA...

santong7

Check if your firewall blocks port 8080, and remove restrictions on that port. Unfortunately, sonoff works via this port. I have several smart switches from sonoff and they work fine on capsman, with default capsman settings. But they need to access port 8080 to complete the setup. Also do not forge...

santong7

Actually I changed via serial the nand-only to etherboot , complete the netinstall , and then changed it again to nand-if-fail-then-ethernet . I couldn't change it from somewhere else except serial, because the router was rebooting continuously. Weird situation with the ros 7. I have two other brick...

santong7

Do you have the script, page is blank? yes I know that's why I am posting. I have found this from https://mikrotik-routeros.com/2013/05/cool-console-terminal-health/ but it is not working on very recent versions of ros :local content :local logcontenttemp "" :local logcontent ""...

santong7

What happened to the http://wiki.mikrotik.com/wiki/Cool_Console script?
It doesn't seem to work with the new 7.1 ROS version.
Any update of the script ?

santong7

I found the solution, thanks to a guy asking in this forum. Netinstall wasn't working because RB1100AHx2 had to be in netboot mode (and not only NAND) while booting, and the only way to enable this was via terminal and serial null cable. After that I was able to proceed with netinstall and revive th...

santong7

I have already done that, in a laptop with windows 7
where I have accomplished after trying the 1100, successful netinstall on RB750Gr3 with the same symptom.

santong7

Dear community, I tried to upgrade the ros from the latest 6 to the latest 7.1.1. The router is on boot loop all the time. We tried to set it on netinstall but no success, the application couldn't recognize it. On the same pc, after many tries with the 1100 we did succesfully netinstall on RB750Gr3 ...

santong7

I have an RB750Gr3 (RB) which is working as a router for our LAN behind a VDSL modem in bridge mode. My ISP gave me a fiber connection with a Cisco ASR920 switch, with internet access enabled on one switch port. ISP told me that in order for the connection to work, I need a router connected to the s...

santong7

Dear community, I have found an old script mostly useful for hotspots. I need someone to help modifying the script to show capsman registered clients, and not hotspot authenticated users. Is that possible ? :local content :local logcontenttemp "" :local logcontent "" :local count...

santong7

No idea why it stops working. I have run Splunk for years without it stopping by it self, always using Ubuntu Server. Maybe there are some other stuff/software on you Ubuntu that kills it. Finally there is a problem with timestamp, found on splunkd.log 08-01-2018 15:52:07.610 +0300 WARN DateParserV...

santong7

File is there now, se this post why it was missing: https://forum.mikrotik.com/viewtopic.php?f=2&t=137476 Not sure why you have problem with Splunk. I have used it for many years and its for me very stable. Test a PC with Ubuntu 18.04 and Splunk. Should work very vell together. Windows should b...

santong7

Where is the zip file ?

Do you have any clue why splunk linux stops logging after a while, and with splunk server restart it starts again and then after a while it stops again until the next splunk server restart ?

Same happens with windows splunk version.

santong7

For a start, disable all rules that refer to your L7 filters! Such filters are completely impossible to debug remotely. When your device has problems, check locally what its network settings are. You should see the config from your DHCP server (gw 192.168.0.1 and those 2 DNS servers). If not, you h...

santong7

Yes but why when reverting to ISP's router, everything works normal. Here is my whole conf /interface ethernet set [ find default-name=ether1 ] name=ether1-WAN1 set [ find default-name=ether2 ] name=ether2-WAN2 set [ find default-name=ether3 ] disabled=yes set [ find default-name=ether4 ] disabled=y...

santong7

LB is not necessary. The PDAs are accessing a web page on IIS locally hosted on a server on the same LAN. Here is my mangle conf. 0 chain=prerouting action=accept dst-address=192.168.0.0/24 log=no log-prefix="" 1 chain=prerouting action=accept in-interface=pppoe-CYTA1 2 chain=prerouting ac...

santong7

I am desperate and cannot find the cause of the problem in RB750.
The problem on the PDAs, is random, every day one or two different PDAs cannot access the server, on different places via different Groove WiFi AP.
When we used the ISP's router we didn't have any issues at all.

santong7

Yes there are several switches.
Why?

santong7

Hello everybody. I would like to ask you a question. I have configured a RB750Gr3 as a load balancer with PPC mangle rules via pppoe wan interfaces (adsl routers in bridge mode) The lan is configured via one ether port (no bridge) with ARP enabled, dhcp server on that interface, also DNS allows remo...

santong7

Thank you again

santong7

Thank you Syed Does your sample config solves issues with the routing of secure websites with 2 factor authentication? I mean do I have to mark https traffic and route it to other gateways as shown below /ip firewall mangle add action=mark-routing chain=prerouting disabled=no dst-port=443 \ new-rout...

santong7

I have 2 WANs via PPPOE client and I want to establish a load balancer I have used the following code /ip firewall mangle add chain=prerouting dst-address-list=MEGARON src-address-list=MEGARON /ip firewall mangle add action=mark-connection chain=forward connection-mark=no-mark \ in-interface=pppoe-C...

santong7

After upgrade to ROS 6.39 I noticed that the rule of P2P matcher has become obsolete and to use layer 7 matcher instead.
Has someone find anything equivalent to suggest ?

santong7

Thank you Daniel for your great tool. I would like to suggest you something. Is it possible to configure the same tool, to show you the CAPSMAN registration table tab, instead of showing the ip and the data. I mean to show the cap, the ssid, the mac address, the hostname and the transferred data ? T...

santong7

I can see the interface lte1 interface (ROS 6.37.1) but PPP client shows unknown interface . I have an old RB751U-2HnD The stick works when it is behind NAT from the cellular ISP with dhcp client interface on the lte1 interface. But I asked from the ISP to remove their NAT and give me direct ip on t...

santong7

Mobile Tik-App for Android began to crash immediately after login to 6.36 upgraded devices. 6.35.4 worked OK . Many routers -- RB750UP, RB951U, RB2011, HAP lite. Please check, confirm and fix something. Thanks in advance. Hello, What phone are you using? Are you able connect to demo.mt.lv and demo2...

santong7

Has anyone tested this product configured as a caps manager and a router ? My config is hex poe lite as a caps manager (to manage 3 CAP rb951ui-2hnd with its POE power supply) with dhcp server, dns server, 25 firewall lines, and bandwidth limiter with 5 mangle rules. The maximum wifi clients will be...

santong7

Yes chechito you understood right. I am planning to use an UBIQUITI POE-24-24 (24V, 1A, 24W). The only limitation is the 500mA of the ether5 output, which is on the limit of each RB (8W divided by 24V = 0.333A), so the first one is going to supply the other two with 0.666A > 0.5A of the ether5. I wi...

santong7

Has anyone managed to achieve the following. I want to install 3 pieces of 951Ui-2HnD on the same network, the 2 will be configured as CAP and the other will be guest router and the CAPS Manager with its wifi interface as CAP. The wan will be an adsl router with its own dhcp server in another area c...

santong7

Does anyone know how to port forward to the mikrotik's inner network. My configuration is as follows. I have an adsl modem router with ppoe enabled (not in bridge mode) with the 192.168.0.1/24 dhcp network, and the mikrotik it is connected on it with the 192.168.1.2 ip address which is used also as ...

santong7

I already have ppc load balancer with 2 adsl lines (using pppoe) and I have pptp and opvpn configured and they work properly. The PPTP and OPVPN is used to connect to my LAN from remote sites. I want to remove the ppc balancer (mangle rules) completely and dedicate the one adsl line for the internet...

santong7

I have a latest ros hotspot mikrotik device, with several groove ap managed by caps in the same rb (1200AHx2). The hotspot works fine but I have issues with the clients. They complain that they have to enter the credentials multiple times during the day. The hotspot main config is : /ip hotspot prof...

santong7

Looks like L2 is being blocked somewhere. Are the Locos setup as AP or station WDS?

They are configured as AP

santong7

Hello guys this is my config. I have a pair of Ubiquiti Nanostation loco m5 in bridge mode configuration (airmax enabled) which I am using them to connect to buildings via p2p wireless link. On the remote 1 building I have 2 SXT G-2HnD configured as AP bridge. On the main building I have RB2011UiAs ...

santong7

I have cookies enabled.

The problem is happening mostly when the user is automatically changing AP (all AP are mikrotik groove ethernet connected quick configured as wisp in bridge mode, they are all on the same ssid with auto channel).

santong7

Which one of the timeouts you mean to set at 8h ?

santong7

Has anyone noticed issues with apple devices registered to captive portal - hotspot of a mikrotik RB1100AHx2 ? The devices are getting connected through the captive portal after entering the credentials and after a while they are getting prompted to input the credentials again. This happens only on ...

santong7

..All interfaces are configured as proxy-arp..

Why?
I am using pptp vpn in order to manage devices on all subnets remotely

So proxy-arp on bridge1, bridge2 and ether9 ..not "all" interfaces, right?

Yes correct, bridge1, bridge2 and ether9

santong7

..All interfaces are configured as proxy-arp..

Why?

I am using pptp vpn in order to manage devices on all subnets remotely

santong7

Recently, I configured a RB1100Ahx2 to work and provide multiple network on different interfaces. Ether1 & 2 are bridged in bridge1 and work in a 10.0.0.0/19 network with hotspot enabled. Ether6,7 & 8 are bridged in bridge2 and work in a 192.168.1.0/24 network. Ether9 is configured in 192.16...

santong7

I would like to know how to route traffic from a pptp win 7 client connected to an rb951G-2hnd (pptp server) to a remote dekstop server session via pppoe adsl. The remote desktop server 192.168.0.12 is on a switch with a cyberoam cr50i device as a gateway 192.168.0.254. The rb951 is connected to the...

santong7

What channel do you use on TPLINK? And what channel on rb751? I am using a different one, but I think that the rb751 has some issues, because I tried to use it as an AP without the usb wifi connected and I have low speed tests with speedtest.net (1,5mbits max). When I am using a RB951-2n I get the ...

santong7

Finally it works but I have low data rates with the onboard rb wireless interface.

santong7

The RB751u-2hnd recognises my usb tplink tl-wn722 Atheros AR9271 with the 5.26 version. I want to use the usb wifi interface to connect with a wifi network in client mode and then bridge the usb interface with the RB751u-2hnd built in interface and use it as an AP. The moment that I put the wifi int...

santong7

I have an RB1100AHx2 configured with a hotspot which uses 2 wan interfaces (connected to adsl modems) and they are used with PPC load balancer on the hotspot. The first one is 12Mbit down and 1.8Mbit up and the other one is 16Mbit down and 0.8Mbit up. I would like to limit them and especially the up...

santong7

Does anyone know how the dude server installed in a RB 1100AH (5.25) as a package can be accessed from WAN ?
From LAN is accessed.
Which ports do I have to open on the wan router , and which ports to allow on firewall ?

santong7

Hello you can use both wireless interfaces as you want, station or AP. so, Yes, you can use it as "repeater", as long as you bridge these 2 interfaces. and yes, you need external antennas Can I bridge the 2 interfaces in 2.4GHz mode ? Μπορούμε να μιλάμε και Ελληνικά αλλά καλό λόγω forum ν...

santong7

Hello

you can use both wireless interfaces as you want, station or AP.
so, Yes, you can use it as "repeater", as long as you bridge these 2 interfaces.

and yes, you need external antennas

Can I bridge the 2 interfaces in 2.4GHz mode ?

santong7

Does anyone know if the Routerboard RB411AR supports simultaneously the built in 2.4Ghz interface for accepting the wifi clients, and the mini pci R52nM 2.4Ghz inerface for doing the repeating of a wifi channel ? I want to use the R52nM to connect to a wifi internet channel from an outdoor Bullet2 (...

Search found 50 matches