MikroTik

jrpaz

With wifiwave2/capsman has anyone had any success with WPA(1/2/3) enabled?

jrpaz

RB4011 & hAP AC3 work great!

The only issue is on the RB4011 wifiwave2 capsman the cap interfaces show as inactive with registrations on them.

jrpaz

Can confirm Wave2 is twice as fast vs the regular drivers on the RB4011.

However, it's not stable enough to run tests at least with my iMac and Macbook pro.

jrpaz

I'm guessing Winbox and Big Sur are ok?

jrpaz

Any word on 7.1?

jrpaz

Sans WiFi?

jrpaz

What devices is this on?

jrpaz

Any news on 7.0b4 ???

jrpaz

Now with v7 Beta 3 is the WiFi working on the RB4011iGS+5HacQ2HnD-IN

jrpaz

Everything is working.

The only issue is importing/exporting addresss.

I bypassed that by copying the Addressses.cdb from the working 3.19 to 3.20 x64

jrpaz

Does the 5 GHz work on the RB4011iGS+5HacQ2HnD now with beta v2?

jrpaz

@jrpaz - not sure about your setup, can you share the full export /export hide-sensitive ? When setting the VLAN interface to the bridge it doesn't work. /interface bridge add name=Bridge_LAN protocol-mode=none /interface vlan add comment=vlan10 interface=Bridge_LAN name=vlan10 vlan-id=10 /interfac...

jrpaz

I was able to get VLAN's to work when I assigned the VLAN to a single port and not the bridge.
I noticed that disabling the VLAN before making changes helps.
I had the router lock up on me when making the change.

jrpaz

It's a VLAN assigned to the bridge interface. Edited to include config /interface/bridge> print Flags: X - disabled, R - running 0 R name="Bridge_LAN" mtu=auto actual-mtu=1500 l2mtu=1598 arp=enabled arp-timeout=auto mac-address=74:4D:28:D5:36:DB protocol-mode=none fast-forward=yes igmp-sno...

jrpaz

1. Routeros-7.0beta1-arm.npk
2. RBD52G-5HacD2HnD-TC
3. Has anyone gotten VLAN tags to work on v7?

jrpaz

It's not on the security blog. I'm assuming it will be there sooner rather than later.

jrpaz

it can not be considered as a bug or vulnerability

That's not what they are saying here viewtopic.php?f=2&t=147048
They are talking about CCR's and CHR's crashing I don't know what more resources people need.

jrpaz

/ipv6 export file=hahahanoipv6foryou.rsc /system package disable [find name=ipv6] /system reboot Thankfully I'm in the position to do the above (and just have on my edge routers, in fact). I am nothing short of apoplectic that I've had to, however. Secretly hoping that either 6.44.1 was a fix for t...

jrpaz

The fix is in v7 guys c'mon

jrpaz

Has anything done about the problem in connection tracking? (it is not listed in the changes, but neither was the change that introduced the problem) loose-tcp-tracking is no longer working! after upgrade and reboot all existing TCP connections across the router are stuck, and firewall logs "t...

jrpaz

WRONG so WRONG

jrpaz

Why is everyone upset? It's all fixed in v7

jrpaz

because I wanted to have a proven, good running solution that I can rely on at BGP. No DIY. Unfortunately, no such router was to be found on the MUM. Also from MT there was nothing new. Very sad ... I know the feeling last year at MUM we were looking for something similar and found nothing. I’m jus...

jrpaz

ROS v7 2020

jrpaz

The new package is in ROS v7 along with every other fix needed.

jrpaz

V7 will fix all issues Release date TBD

My RB4011 is performing well but nothing like the Wave2 stuff from other manufacturers.

Sad

jrpaz

Ok, great! I hope we don't have to bombard support with emails to get some more performance out of the RB4011 like the HAPac2.

jrpaz

Is there any throughput dropout like on the HAP ac2?

jrpaz

I bet 2022 by then everything will be obsolete.

jrpaz

CRS125 & RB750Gr3 no issues on the update and DHCP Client Issue fixed.

jrpaz

DHCP Client seems to be sorted out and working now!

jrpaz

jrpaz

DHCP Client still broke.

6.41.x was that last stable release......

jrpaz

So the DHCP issue will be addressed in the next RC as per support's replies.

jrpaz

Same here lets hope they fix soon.

jrpaz

WAN IP Lease expires on daily basis Since upgrading to 6.42.1, I noticed that on a daily basis I get the following log entries apr/24 15:16:35 dhcp,critical,error dhcp-client on ether1 lost IP address <WAN IP> - lease expired 12:28:52 dhcp,critical,error dhcp-client on ether1 lost IP address <WAN I...

jrpaz

It's happening to me on all routers (RB2011,HEX2,CRS125) running 6.42.1.

The DHCP client is stuck on renewing until the lease expires.

I opened a support ticket lets see what they say.

jrpaz

WAN IP Lease expires on daily basis Since upgrading to 6.42.1, I noticed that on a daily basis I get the following log entries apr/24 15:16:35 dhcp,critical,error dhcp-client on ether1 lost IP address <WAN IP> - lease expired 12:28:52 dhcp,critical,error dhcp-client on ether1 lost IP address <WAN I...

jrpaz

Still seeing issues with the RX on the hAPac^2 it doesn't get over 100 Mbps on IPERF,
However TX from the hAPac^2 is very much improved well over 300 Mbps.

Tests done about 5m away from hAPac^2

jrpaz

No improvement on the hAP ac^2. Similar results to the ones above.

jrpaz

I would love to see if anyone has it working at close to 40 Gbps.

jrpaz

They don't even push close to 40 Gbps.

jrpaz

Just got mine today no noise. I am using PoE-In to power it.

jrpaz

Can confirm this is annoying. I only have five sites and to get OSPF to work I added each /32 to the network tab, and it's working. This seems like an urgently needed fix for larger deployments. *Make sure to set netmask to 32 on the OVPN server. It's like the OVPN Server doesn't respect that settin...

jrpaz

I think. v7 is rumored to have an updated linux kernel.

jrpaz

I just want compatibility with Intel XL710.

jrpaz

Yes it supports it! I have my wAP-R running it.

Follow the steps for RouterOS v6.39 it has worked for me.
https://wiki.mikrotik.com/wiki/Cellular ... _modems_01

jrpaz

AFAIK you have to wait for ROS v7.

jrpaz

Really just move the queue rules up or how?

jrpaz

I don't need them but If I want them 75% performance hit sigh.

jrpaz

Unfortunately, I need to keep masqarade on so I guess fast track it is.

jrpaz

I never used notrack

jrpaz

Has anyone been able to get a 1Gbps throughput on an RB750Gr3 w/o Fasttrack?

Disabling Fasttrack yields about 220 Mbps maximum throughput.

jrpaz

Try running at+qcfg="usbnet",1 on the EC25-V to allow it to go to ECM mode AKA LTE interface.

It worked for me and I have it running with my wAP-R I get about 15/5 Mbps up/down

jrpaz

It's working now I needed to go to ports - firmware and set the ignore-direct-ip-driver to yes & it reboot.

The issue I have is the same one I had with the Novotel 730L that it would reboot every few seconds and drop the connection.

jrpaz

Hi All, I have an RBwAPR-2nD with a Quectel EC25-V LTE running on RC RoS 6.41.61 and the LTE card just shows up as android under the USB device section. Do anyone have a wAP-R working with a 3rd party LTE card? https://wiki.mikrotik.com/wiki/Manual:Peripherals is pretty much useless at this point as...

jrpaz

Novatel 750 or 730 because I had the same issue with the 730 and ended up returning it.

jrpaz

Same issue with the RB750gr3 had to downgrade back #sad

jrpaz

The Novotel 730L is still unable to stay connected it constantly loses DHCP leases even after this release.

jrpaz

Still the same issue with 6.41rc38

jrpaz

I have a Novotel 730 which was added in 6.41r6 & it still is function it reboots when ever I try to pass traffic through it. I already emailed support hopefully they can help me figure this out.

jrpaz

logerror.png

That's what I get in the logs every time it goes down.

jrpaz

I got a error message that says unknown modem at the same time the connection drops. Have you still on RC6 ?

jrpaz

I have auto-connect set and the signal levels are great. So this is interesting.

jrpaz

With the hAP AC & Hex3, it's a full-size USB port but the interface goes link down every 60 seconds.
It doesn't lose power as the lights are green.
I am assuming you set DHCP Client on the Interface right?
When I connect it to my PC it never goes down.

jrpaz

Does the 730 interface reboot frequently for you?

jrpaz

I would like to go ahead and put RouterOS v7 on my Christmas list for 2018.

jrpaz

- Routing filters often need to be disabled/re-enabled to make them work. Bain of my existence.

jrpaz

Any updates on this we are running 6.36.3 and the issue is still happening.

jrpaz

I would suggest you generate new certificates at 2048 vs 1024. Did that and have not encountered any issues.

jrpaz

PPPoE on 6.36.3 does fast track work?

Currently on 6.36 debating if I should upgrade.

jrpaz

Doing good work sir!

jrpaz

I just ran into an issue with an RB2011 running 6.36 & 6.34.6 where it lost power, and the PPPoE client would not load the default route upon reboot. I would have to manually deselect the add default route off and then select it again to restore the route. The PPPoE server is a CCR1036 running 6...

jrpaz

I just ran into an issue with an RB2011 running 6.36 where it lost power, and the PPPoE client would not load the default route upon reboot. I would have to manually select the add default route off and then on to restore the route. The PPPoE server is a CCR1036 running 6.36 also.

Thanks

jrpaz

Does the XL710 work at SFP+ ?

jrpaz

Good Afternoon, I am having a hell of a time trying to successfully operate a bond the two SFP+ interfaces on the CCR1036's to the N4032F's. I configured a LAG group on the Dell N4032F's for the Bonded Pair of the Mikrotik. Randomly the VLAN traffic that is associated with that bond drops or creates...

jrpaz

2GB
http://wiki.mikrotik.com/wiki/Manual:Ro ... re_Support

That settles that!

jrpaz

Hi All,

What is the maximum memory that you can have with RouterOS V6 on an x86 Platform?

Regards

jrpaz

Once I added a Loopback Bridge the issue cleared up.

Thanks

jrpaz

Good Evening. Our ISP assigned us a /29 on a vlan of 200. I created the VLAN and assigned it ether1. It works great. Now here is the kicker I wanted to assign a IP from the /29 to ether2 with out vlan tagging. I have tried creating a bridge with ether2&vlan202 and it didn't work. I also tried sw...

jrpaz

We added some VRF's and it worked !

jrpaz

Good Afternoon, We currently have an MPLS working across 3 sites we would like to create a separate VLAN just for VoIP that allows it to communicate over the MPLS with the VoIP servers instead of the Open Internet. We already created the VLANs at each site how do we route it back to the VoIP servers...

jrpaz

There are InOctets and OutOctets for every interface...

So what you are seeing in there is for every interface on your router.

That was it I changed my request and it sorted it all out. Do you happen to know what is the best practice to measure dropped packets in a queue tree ?

Thanks.

jrpaz

We are using sensu to pool the mirkotik's here is the command and out put. ruby /etc/sensu/plugins/snmp-bulk-metrics.rb -C public -h happy.fun.zone -O 1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2 -s gw happy.fun.zone.gw.IF-MIB::ifHCInOctets.3 298542649.0 1424701185 happy.fun.zone.gw.IF-MIB::if...

jrpaz

Good Morning,

Why does the Mikrotik return multiple octets when you poll IF-MIB::ifHCInOctets & ifHCOutOctets them. Which octet is representative of bytes in and out respectively.

Thanks.

jrpaz

You can find Rx/Tx packets and bytes count on interface in standard IF-MIB, not in mikrotik.mib.

Any monitoring system supports SNMP counters on interfaces

But I am looking for a way to find out TX/RX Rate for interfaces just like the wireless interfaces on the Mikrotik.

jrpaz

Good Evening,

I was looking through the mikrotik.mib file and I can not find a Rx Rate/Tx Rate for wired interfaces. How does one monitor traffic on a wired interface through snmp.

Any help would be appreciated.

Thanks.

jrpaz

And it's fixed apparently if you have a Adtran fixed to 100 Full Duplex I only works when you connect it to the 10/100 ports on the RB2011.

jrpaz

Yup talked to XO they hard coded it to 100Mbps/FD. Issue stays the same.

jrpaz

Ok so here is the issue I am having it's driving me insane. We currently have a 20MB/s wan connection from XO and they deployed a adtran 3884T gateway. We configured our RB2011 and we can report we have wan connectivity. "so far so good". Here is the Major disparity I have discovered. When...

jrpaz

is there any way you can make it print the variable or does it have to save to a file.

Search found 91 matches