Yes that is what I wanted to know thanks. I will give it a try. Still trying to learn ROS syntax.

Thank you very much Jarda.

Thanks for the reply. If you look at the preceding script, with my limited understanding, it is just to check if it is reported as synchronised. ie Base122 used the following code to check the status of synchronisation [/system ntp client get status]; but the status option apparently does not exist ...

Anyone???

I'm going through somewhat of a learning curve here. RoS 6.21.1 also does not support the "status" option. but when I run \system ntp client print: it displays the following info. enabled: yes mode: unicast primary-ntp: 146.64.24.58 secondary-ntp: 146.64.28.1 dynamic-servers: status: synch...

I also installed the NTP package but still get the same result.

I have a RB951G running RouterOS 6.2 and I have tried to run this script. I am getting the following Script Error: not enough permissions (9).

I have checked the user rights and it seems as if I have full administrator rights. Any assistance would be much appreciated thanks.

It is quite important that you push the reset button until the led stops flashing. Then try and connect using the mac address of the router.

Sorted

Hi All I did some searching on the forum but was unable to find a relevant post. Probably due to a lack knowledge. I have a RB951G that I have used as a Wifi and wired router to give internet access to my home network. To date I have used a PPP connection to a 3g USB modem but I want to connect to L...