Community discussions

MUM Europe 2020

Search found 30 matches

by ghi000
Thu Mar 24, 2016 12:13 pm
Forum: RouterBOARD hardware
Topic: RB750UP & RouterOS 6.34.3 = brick after sys reboot
Replies: 1
Views: 587

Re: RB750UP & RouterOS 6.34.3 = brick after sys reboot

Forgot to mention, not even power cycle will make the router boot.
by ghi000
Thu Mar 24, 2016 12:09 pm
Forum: RouterBOARD hardware
Topic: RB750UP & RouterOS 6.34.3 = brick after sys reboot
Replies: 1
Views: 587

RB750UP & RouterOS 6.34.3 = brick after sys reboot

Hello, Netinstall and normal upgrade from winbox (system packages/check/download and install) will brick the router when used 6.34.3-2-etc, The router will not boot until powered on with reset button pressed 'till all interface's leds are off and then releasing the reset button, it will boot. Every ...
by ghi000
Mon Feb 09, 2015 5:46 pm
Forum: General
Topic: RouterOS v6.26!
Replies: 72
Views: 24659

Re: RouterOS v6.26!

firmware v3.22 still broken on RB750UP, just like 3.21. after install and reboot, the router is frozen with all leds on and it will not boot even after a pwer cycle, it will boot only if powered on with reset button pressed. this is how i lost connection to some sites hundreds of km away. nice job :)
by ghi000
Fri Sep 05, 2014 12:56 pm
Forum: RouterBOARD hardware
Topic: SFP compatibility.
Replies: 9
Views: 8888

Re: SFP compatibility.

thanks. "sfp compatibility" was enough for me to write below. i am from planet Vulcan, you know?
by ghi000
Thu Sep 04, 2014 2:48 pm
Forum: RouterBOARD hardware
Topic: The mystery of the ethernet - Solved
Replies: 13
Views: 3164

Re: The mystery of the ethernet

you must use the ubiquity rj45 connectors also, or you will have the same problem, and you must respect the procedure in the manual.
by ghi000
Thu Sep 04, 2014 2:40 pm
Forum: RouterBOARD hardware
Topic: SFP compatibility.
Replies: 9
Views: 8888

Re: SFP compatibility.

Hello, i just tested an sc wdm module, the XGIGA XGSF-BS3503-20 sfp module 1310tx/1550rx and it is flapping just like flappy birds :) anyone knows an SC module that is working with CRS125-24g-15-rm? The only way it would be stable, but without working is disabling auto negotiation in RouterOS. I rea...
by ghi000
Fri Jun 20, 2014 10:58 pm
Forum: Scripting
Topic: Send an email for tcp-state established to a specific IP
Replies: 0
Views: 797

Send an email for tcp-state established to a specific IP

Hello, I have some devices connecting from time to time to a backup server only when the main server is down, but those devices will not reconnect to the main server when it is up again, so i have to do it manually, the thing is not all of them will connect to the backup server at once due to differ...
by ghi000
Tue Jun 17, 2014 4:33 pm
Forum: General
Topic: v6.15 released
Replies: 302
Views: 104394

Re: v6.15 released

v6.15 PPC platform can not negotiate IPSEC with MIPS devices, even if MIPS are v5.xx or v6.xx. Basically, v6 is still useless for 1100AHx2 if you need IPSec. ALmost same problem i had with CCR. Thank goodness i didn't bought it.
by ghi000
Mon Dec 09, 2013 10:24 pm
Forum: Beginner Basics
Topic: MikroTik RB951G-2HnD
Replies: 22
Views: 14347

Re: MikroTik RB951G-2HnD

Not normis here, but i bet they did, not HE, he's a person :) imagine a guy helping others on the forums and in the meantime, testing devices between the posts,using full realtime communication with dev team. You better move to Stargate SG-1 :) Until some guys at "wrt" wiil not use the Atheros's HW-...
by ghi000
Mon Dec 02, 2013 9:02 pm
Forum: General
Topic: Who's using Mikrotik?International speed for some Riga ISP's
Replies: 0
Views: 511

Who's using Mikrotik?International speed for some Riga ISP's

Sorry for being bored :) RCS-RDS Romania, București to: AS Balticom http://www.speedtest.net/result/3139842562.png Lattelecom http://www.speedtest.net/result/3139848403.png Alphahost http://www.speedtest.net/result/3139851394.png SIA Stream Networks http://www.speedtest.net/result/3139792023.png So,...
by ghi000
Fri Nov 29, 2013 9:13 pm
Forum: General
Topic: How to properly setup RB951G-2HnD RouterOS L4 pppoe client.
Replies: 1
Views: 1090

Re: How to properly setup RB951G-2HnD RouterOS L4 pppoe clie

I don't know what the defaults are, but you can try with MTU and MRU set to 1492. PPPoE is inferior to PPPoA, so do not expect too much.
You can also remove the dhcp client on eth1 and, why not, ARP disabled.
Maybe somene with more experience and knowledge will help you :)
by ghi000
Thu Nov 28, 2013 11:48 pm
Forum: RouterBOARD hardware
Topic: RB450G successor needed
Replies: 10
Views: 2609

Re: RB450G successor needed

You can use rb951G and disable wireless if you don´t need them. CPU allows overclock to 750Mhz I did it with a gigabit pppoe connection. when it reaches 220Mbps it is rebooting. again and again and again :) i switched it back to default frequency and it just stays at 220Mbps, without rebooting. PPP...
by ghi000
Sun Nov 24, 2013 12:18 pm
Forum: General
Topic: Improved PPP package for v6.x
Replies: 45
Views: 16814

Re: Improved PPP package for v6.x

on 951g-2hnd i have lower speed than with routeros v6.6 when connected with pppoe client
by ghi000
Fri Nov 22, 2013 10:43 pm
Forum: General
Topic: Tutorials blogs and other helpful RouterOS resources
Replies: 65
Views: 57488

Re: Tutorials blogs and other helpful RouterOS resources

i don't have the book, but i know that almost every book is a good reading. after that, it all depends on the reader's imagination :) and the engineers with imagination are not MAD :) they are brilliant

didn't know about the roof collapse, my good thoughts to their families, too.
by ghi000
Thu Nov 21, 2013 10:42 am
Forum: Beginner Basics
Topic: MikroTik RB951G-2HnD
Replies: 22
Views: 14347

Re: MikroTik RB951G-2HnD

don't buy it if your connection is Gigabit PPPoE :)
by ghi000
Thu Nov 21, 2013 1:39 am
Forum: Beginner Basics
Topic: MikroTik RB951G-2HnD
Replies: 22
Views: 14347

Re: MikroTik RB951G-2HnD

Hello, I am using this router at home and i can say it cannot go over 220Mb/s on my home PPPoE Gigabit connection. With my MB Pro Retina Display connected directly to the ISP over PPPoE i can get 980Mb/s. On wifi the retina macbook will not go for more than 45Mb/s. The Retina Display has a Broadcom ...
by ghi000
Mon Sep 16, 2013 11:19 pm
Forum: General
Topic: RB1100AHx2 hardware encryption
Replies: 3
Views: 1953

Re: RB1100AHx2 hardware encryption

But it doesn't say aes 128 only. I have them both models and they' re working perfect with AES 256
by ghi000
Mon Sep 16, 2013 2:02 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 61579

Re: v6.4 released

hello, i need to put this to work, any fix for IPSec? shall i try it? :) i didn't even paid for it, it stays here just for testing, nobody wants to buy it, i have it for 3 months already. i could be the only customer for this and the seller is not very happy. nice CCR :)
by ghi000
Fri Aug 16, 2013 8:38 pm
Forum: Scripting
Topic: Autoupdating Ips for tunlr DNS
Replies: 3
Views: 3098

Re: Autoupdating Ips for tunlr DNS

great, thanks!
by ghi000
Mon Aug 05, 2013 12:14 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 90657

Re: v6.2 released

well, congratulations. you can now use it as a simple home router :)
by ghi000
Sun Aug 04, 2013 3:47 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 90657

Re: v6.2 released

same thing here :)

no more new routeros in prod environment :) except this router, which will not work with v5.xx

IPSec working only between mipsbe devices. Cannot use the CCR with MIPSBE and PPC.
by ghi000
Sat Aug 03, 2013 10:50 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 90657

Re: v6.2 released

And some connections are working only they are initiated from the other network, and not the CCR's. It is simply ignoring the routes, or the requests, i don't know.

I'll send back the CCR and not buy it. It was for testing.
by ghi000
Sat Aug 03, 2013 10:47 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 90657

Re: v6.2 released

IPSec is dead on CCR, unusable. It works with some MIPSBE, but not with all, all routers with the same configuration. It worked with some of them for about 5 minutes, then stopped. With some other didn't work at all, and with some, as i type, the connection is still UP, but i will not wait, i'll pu...
by ghi000
Fri Aug 02, 2013 8:58 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 90657

Re: v6.2 released

IPSec now working between MIPSBE to MIPSBE and MIPSBE to PPC+viceversa. I will try tomorrow all platforms, except mipsle. Good job, Mikrotik. If i'll have an address, i'll send you some beer, Normis :) Too bad i bought today a v5 license for x86 :) upgradeable to 7.x :( just because IPSec was not wo...
by ghi000
Sat Jul 06, 2013 2:00 pm
Forum: RouterBOARD hardware
Topic: RB-2011UAS-RM New hardware version, does not work with 5.25
Replies: 23
Views: 7834

Re: RB-2011UAS-RM New hardware version, does not work with 5

Yes, latest revision comes preinstalled with v6 and will not work with old versions. This is normal that new hardware requires new software, new drivers can only be integrated in v6 RouterOS, since it has new kernel. Eventually all RouterBOARDs will come with v6. It is stable and there is no reason...
by ghi000
Wed Jun 12, 2013 9:41 pm
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 54856

Re: RouterOS 6.1 released

ipsec from 6.1 to 5.25 - no connection

ipsec from 5.25 to 6.1 - packet rejected
by ghi000
Fri Jun 07, 2013 1:46 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 69151

Re: v6.0 released

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6, also it will not work from RB1000 to RB1100AHx2. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade fi...
by ghi000
Fri Jun 07, 2013 1:38 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 - faulty fan?
Replies: 0
Views: 698

RB1100AHx2 - faulty fan?

Hello, anybody knows what type of fans are inside the RB1100AHx2? Last night I received high temperature allarms on the cpu, now it stays at 45 Celsius with 0 RPM. Even if i select the fan manually, switching to auxiliary or back to main fan after a few minutes, will not make any change in cpu tempe...
by ghi000
Thu Jun 06, 2013 6:57 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 69151

Re: v6.0 released

Thanks MikroTik for wonderful hardware and software! And congratulations with release! :) I want to report a bug with IPSec. After upgrading from 5.25 to 6.0 IPSec VPN (IP over IP tunnel via IPSec in transport mode) stopped to work. A lot was logged (when enabled ipsec logging), incloding the follo...
by ghi000
Thu Jun 06, 2013 6:41 pm
Forum: General
Topic: IPSEC / Nat issue
Replies: 3
Views: 2146

Re: IPSEC / Nat issue

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade files used for both mips and ppc devices were taken ...