Forgot to mention, not even power cycle will make the router boot.

Hello, Netinstall and normal upgrade from winbox (system packages/check/download and install) will brick the router when used 6.34.3-2-etc, The router will not boot until powered on with reset button pressed 'till all interface's leds are off and then releasing the reset button, it will boot. Every ...

firmware v3.22 still broken on RB750UP, just like 3.21. after install and reboot, the router is frozen with all leds on and it will not boot even after a pwer cycle, it will boot only if powered on with reset button pressed. this is how i lost connection to some sites hundreds of km away. nice job

thanks. "sfp compatibility" was enough for me to write below. i am from planet Vulcan, you know?

you must use the ubiquity rj45 connectors also, or you will have the same problem, and you must respect the procedure in the manual.

Hello, i just tested an sc wdm module, the XGIGA XGSF-BS3503-20 sfp module 1310tx/1550rx and it is flapping just like flappy birds :) anyone knows an SC module that is working with CRS125-24g-15-rm? The only way it would be stable, but without working is disabling auto negotiation in RouterOS. I rea...

Hello, I have some devices connecting from time to time to a backup server only when the main server is down, but those devices will not reconnect to the main server when it is up again, so i have to do it manually, the thing is not all of them will connect to the backup server at once due to differ...

v6.15 PPC platform can not negotiate IPSEC with MIPS devices, even if MIPS are v5.xx or v6.xx. Basically, v6 is still useless for 1100AHx2 if you need IPSec. ALmost same problem i had with CCR. Thank goodness i didn't bought it.

Not normis here, but i bet they did, not HE, he's a person :) imagine a guy helping others on the forums and in the meantime, testing devices between the posts,using full realtime communication with dev team. You better move to Stargate SG-1 :) Until some guys at "wrt" wiil not use the Ath...

Sorry for being bored :) RCS-RDS Romania, București to: AS Balticom http://www.speedtest.net/result/3139842562.png Lattelecom http://www.speedtest.net/result/3139848403.png Alphahost http://www.speedtest.net/result/3139851394.png SIA Stream Networks http://www.speedtest.net/result/3139792023.png So,...

I don't know what the defaults are, but you can try with MTU and MRU set to 1492. PPPoE is inferior to PPPoA, so do not expect too much.
You can also remove the dhcp client on eth1 and, why not, ARP disabled.
Maybe somene with more experience and knowledge will help you

You can use rb951G and disable wireless if you don´t need them. CPU allows overclock to 750Mhz I did it with a gigabit pppoe connection. when it reaches 220Mbps it is rebooting. again and again and again :) i switched it back to default frequency and it just stays at 220Mbps, without rebooting. PPP...

on 951g-2hnd i have lower speed than with routeros v6.6 when connected with pppoe client

i don't have the book, but i know that almost every book is a good reading. after that, it all depends on the reader's imagination and the engineers with imagination are not MAD they are brilliant

didn't know about the roof collapse, my good thoughts to their families, too.

don't buy it if your connection is Gigabit PPPoE

Hello, I am using this router at home and i can say it cannot go over 220Mb/s on my home PPPoE Gigabit connection. With my MB Pro Retina Display connected directly to the ISP over PPPoE i can get 980Mb/s. On wifi the retina macbook will not go for more than 45Mb/s. The Retina Display has a Broadcom ...

But it doesn't say aes 128 only. I have them both models and they' re working perfect with AES 256

hello, i need to put this to work, any fix for IPSec? shall i try it? i didn't even paid for it, it stays here just for testing, nobody wants to buy it, i have it for 3 months already. i could be the only customer for this and the seller is not very happy. nice CCR

great, thanks!

well, congratulations. you can now use it as a simple home router

same thing here

no more new routeros in prod environment except this router, which will not work with v5.xx

IPSec working only between mipsbe devices. Cannot use the CCR with MIPSBE and PPC.

And some connections are working only they are initiated from the other network, and not the CCR's. It is simply ignoring the routes, or the requests, i don't know.

I'll send back the CCR and not buy it. It was for testing.

IPSec is dead on CCR, unusable. It works with some MIPSBE, but not with all, all routers with the same configuration. It worked with some of them for about 5 minutes, then stopped. With some other didn't work at all, and with some, as i type, the connection is still UP, but i will not wait, i'll pu...

IPSec now working between MIPSBE to MIPSBE and MIPSBE to PPC+viceversa. I will try tomorrow all platforms, except mipsle. Good job, Mikrotik. If i'll have an address, i'll send you some beer, Normis :) Too bad i bought today a v5 license for x86 :) upgradeable to 7.x :( just because IPSec was not wo...

Yes, latest revision comes preinstalled with v6 and will not work with old versions. This is normal that new hardware requires new software, new drivers can only be integrated in v6 RouterOS, since it has new kernel. Eventually all RouterBOARDs will come with v6. It is stable and there is no reason...

ipsec from 6.1 to 5.25 - no connection

ipsec from 5.25 to 6.1 - packet rejected

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6, also it will not work from RB1000 to RB1100AHx2. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade fi...

Hello, anybody knows what type of fans are inside the RB1100AHx2? Last night I received high temperature allarms on the cpu, now it stays at 45 Celsius with 0 RPM. Even if i select the fan manually, switching to auxiliary or back to main fan after a few minutes, will not make any change in cpu tempe...

Thanks MikroTik for wonderful hardware and software! And congratulations with release! :) I want to report a bug with IPSec. After upgrading from 5.25 to 6.0 IPSec VPN (IP over IP tunnel via IPSec in transport mode) stopped to work. A lot was logged (when enabled ipsec logging), incloding the follo...

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade files used for both mips and ppc devices were taken ...