Quite an old post, but on my cAP Lite 6.49.8 the naming issue still remains: ifName = current interface name ifDescr = current interface name ifAlias = empty It would be really helpful if we could get the original interface name as well as the new name (shown in WinBox). Has this been changed with R...

You can follow the wiki: http://wiki.mikrotik.com/wiki/Manual:Sw ... p_Features

However, this solution is not working for me (RB 450G like you have).

Please let me know your results.

Dirk

Unfortunately the solution described above, is not working for my RB 450G. What exactly is not working? What ports are involved in your configuration? Is switch-all-ports options (which only works for a few boards, but including RB450G) is enabled? The results do not depend on the switch-all-ports ...

I have the same requirement. Unfortunately the solution described above, is not working for my RB 450G. Is anybody running a 450G with a solution like this?

Dirk

You need policy routing. Something like However, it is just implemented for IPv4.

Hello, The WAN interface is on eth1-gateway. I'll try to describe interfaces: eth1-gateway -> wan interface, on the LAN side the address is 10.201.1.1 eth2 -> LAN interface connected to iLO port of HP server eth3 -> LAN connected to regular HP interface #1 eth4 -> LAN connected to regular HP interfa...

Hello everybody, I want to set up some VLANs on the router, followed the guide http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features and I've read the posts on the board, but things are not working as expected. The test setup is quite simple: Airport <- untagged VL 20, tagged VL 1003 -> eth2 (ma...

+1 for User Manager - e.g. limitation functionality. (see this post http://forum.mikrotik.com/viewtopic.php ... 49#p450651

Dirk

The good news: system boots, no "unaligned" messages so far. The bad news: the whole system reboots without warning. ROS log entry: System rebooted because of kernel failure Let's not run ahead of ourselves and make assumptions. This may or may not be because of the patches. You need to d...

I just had a look into the 3.3.5-patch mentioned by Nathan - I think I will start to incorporate it piece by piece... and as far as I know any unaligned memory access on a mips box should lead to a crash. I just noticed that both in OpenWRT trunk and in the Barrier Breaker branch that it looks like...

/toot torch dont show src-address http://imgur.com/GuYk8Ds its works just fine on 6.18. Confirmed, address display for /tool torch is somehow messy (src-address is 192.168.230.1, dst-address not shown). The display within Winbox is ok. [admin@MikroTik] > /tool torch interface=WAN dst-address=0.0.0....

I'm successfully using http://wineskin.urgesoftware.com/ for Winbox, Btest and Netinstall.

I had a Qnap NAS (with original firmware) which gave the same result. I can't recall the hostname file, but the trailing \00 was only with ROS, not with OpenWRT.

It was annoying, because my dhcp lease-script set static dns names on ROS.

Now the NAS is on Debian and the problem is gone.

Hello, I try to give timed access to the internet via Hotspot/User Manager. Setup with MAC login and an empty profile is working. Problems arise with the limitations. (The Wiki does not document this feature :( ) /tool user-manager profile limitation add address-list="" download-limit=0B g...

I have to check the Open In New Window box, otherwise Winbox v3.0beta3 crashes after pressing the Connect button (Windows 7 SP1).

Where can al check how to use "DNS names in VPN address" new feature..?? Do I need to upgrade my RouterOs ?? According to my Winbox I am using the last one (V6.12) Thank you in advance.. CésaR simply write the vpn server address in the address field of winbox. this requires that your vpn ...

Please read description of "sign" command http://wiki.mikrotik.com/wiki/Manual:System/Certificates#General_Menu Thank you for updating the documentation. CA certificates are created if key-usage=key-cert-sign set in the template. If this is the new procedure, may I ask to adapt Winbox for...

I'm not found in 6.12 /certificate sign-ca . How do I get sign-ca ? I had the same question and got no answer. http://forum.mikrotik.com/viewtopic.php?f=1&t=84044&start=100#p422356 I guess you have to open a ticket. Meanwhile use openssh to generate a self-signed CA or go back to ROS 6.11

What happened to /certificate sign-ca ... in 6.12?

Be sure to have set at minimum policy=test for the script or the scheduler

Dirk

I have installed wine and can start up netinstall but i have error
See the printscreen i made.
What can i do

Try to run Netinstall as root (see this post from 2008: http://forum.mikrotik.com/viewtopic.php?f=2&t=25384)

"store,error create journal failed:-1" Do you have any idea what that means ? in some of our 435G's micro sd cards are dissapeared after 6.9 upgrade and some of them gives this error ? downgrading won't solve problem sd cards are gone we couldn't hard reset "we have to cut power of a...

Not sure why this wasn't done before or what I've broken in the process; I've taken the latest OpenWRT Backfire snapshot (r33081). I then applied the metarouter patches to the longterm 2.6.32 kernel which is 2.6.32.61 at the time of writing. This is the 2.6.x with the latest projected EOL, somewher...