Community discussions

MikroTik App

Search found 8 matches

by PhoeKhwar
Mon Jan 25, 2021 10:33 pm
Forum: General
Topic: SLOW SPEEDS WITH ETHERNET BRIDGES
Replies: 8
Views: 6160

Re: SLOW SPEEDS WITH ETHERNET BRIDGES

all the problem was solved reconfiguring all again in the bridge switch Current config: 1 - only one bridge with all ports inside and Hardware of OffLoad enabled 2 - Isolate the ports than we want E.g: port1 + port2 + port9 = line ISP1 and trunk for each router port3 + port4 + port11 = line ISP2 an...
by PhoeKhwar
Sat Oct 24, 2020 12:25 am
Forum: General
Topic: Problem Hardware Offload on CRS326-24G-2S+
Replies: 6
Views: 3117

Re: Problem Hardware Offload on CRS326-24G-2S+

i have CRS326-24G+2Q+ . i have 8 remote sites which is connected to CRS326 ,let `say it A,B,C,D,E,F,G,H . Each remote sites connected with 2 link with 802.3ad Bonding to CRS326 A remote site is only using vlan 10,20 B remote site is only using vlan 30,40 C remote site is only using vlan 50,60 D remo...
by PhoeKhwar
Tue Sep 01, 2020 4:05 am
Forum: RouterOS beta
Topic: Feature Request for x86 and CHR for SFP Menu tab
Replies: 4
Views: 1364

Feature Request for x86 and CHR for SFP Menu tab

For x86 and CHR there is no SFP menu tab . Hope to add this feature in future release
by PhoeKhwar
Thu Jul 16, 2015 1:11 am
Forum: General
Topic: LoadBalancing For 2WAN ( Only WAN2 For port 80 and 443 )
Replies: 2
Views: 1492

Re: LoadBalancing For 2WAN ( Only WAN2 For port 80 and 443 )

Dear ,
Actually i have 11 WAN .Previously i posted for example....... .. i want 6WAN for all traffic including 80,443 , and the rest of 5 WAN for 80 and 443 only , if i use it to Policy Based Routing ... there is alot of bandwidth for waste ....is any solution for that ?
by PhoeKhwar
Wed Jul 15, 2015 4:19 am
Forum: General
Topic: LoadBalancing For 2WAN ( Only WAN2 For port 80 and 443 )
Replies: 2
Views: 1492

LoadBalancing For 2WAN ( Only WAN2 For port 80 and 443 )

Dear , i `m using loadbalancing PCC method with 2 WAN , but i just want to use WAN2 for only 80,443 for loadbalancing with WAN1 , this is my config /ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local add address=192.168.1.2/24 network=192.168.1.0 broadc...
by PhoeKhwar
Tue Apr 22, 2014 10:33 pm
Forum: Beginner Basics
Topic: Please Help me With CCR Ports
Replies: 3
Views: 1232

Re: Please Help me With CCR Ports

Yes, From DMA Softlab Documentation......just only for one step Internet ------------------- Switch---------------------------- Mikrotik ---------------------------------hotspot -----------------------------Radius For me , Internet (5 WAN loadbalancing with PPPOE Client ) ether 1 to 5---------------...
by PhoeKhwar
Mon Apr 21, 2014 9:33 pm
Forum: Beginner Basics
Topic: Please Help me With CCR Ports
Replies: 3
Views: 1232

Please Help me With CCR Ports

Hello , Please help me .. i have CCR which has 12Ethernet ports. Ether1 to Ether5 is using 5WAN loadbalancing and Ether6 is LAN using hotspot Ether1 to Ether5 is dynamic IP address assign from PPPOE server Ether6 IP Address = 172.16.1.1/16 , DHCP enable = 172.16.2.1- 172.16.254.254 And now i want to...
by PhoeKhwar
Mon Jul 29, 2013 4:07 pm
Forum: Beginner Basics
Topic: Need Help ( Please help me about Hotspot with AP & PtP)
Replies: 1
Views: 830

Need Help ( Please help me about Hotspot with AP & PtP)

it can`t get Internet from PtP output AP ................. Please help me