Thanks ConradPino, but as far as I could tell they are using external power supply for the fan, I was looking for using internal header and powersource if exists

Hello all, i was searching for solution how to efectively cool CRS305 with RJ45 modules and found out there could be potentially FAN header on the board. Could somebody confirm that these pins are really unpopulated fan header? Picture : https://www.jezekus.net/crs305_internals.jpg If this is fan he...

One more issue on RB760iGS - is HW offload on IPsec crypto working? Seeing more than double of cpu usage during transfer and getting cca watchdog reboot every hour

Upgraded HEX S with SFP module from 6.49.5 to 7.2 and now all information about SFP module is gone.
Anyone else seeing this?

I have upgraded my RB2011 from 6.49.4 to 7.1.3 without any issues, added UPS package, but I am unable to add BackUPS 550 connected via USB. It was working correctly on v6 but on v7 I can only add serial0 port in UPS menu. Is there any workarround? > system/resource/usb/print Columns: DEVICE, VENDOR,...

Great, just added VLAN on MLAG ports as tagged and it's working as intended.
Thank you

Thank you for reply, I will test and let you know it it works.

Any ideas? Doing something wrong? How to deal with uplink failure from MLAG switch pair?

Hello, we are testing MLAG configuration on two CRS305-1G-4S+ and single client (hap lite). All devices are running RouterOS v7.1.1. testing_lab.png If we are running it like on the picture, ping from upstream router will stop after few moments, only way to restore the communication is disabling hal...

Would it be possible to reupload the versio 2? I am getting error that attachment no longer exists.
Thank you

Tunnel was working well only without NAT-T, when it's enabled the tunnel is not even established. I was suspecting bad connectivity and packet drops. Unfortunatelly after upgrade the line is solid stable and SSH or OpenVPN is running like a charm, and IPsec tunel stopped working. It says "Estab...

In the firewall the are only accept rules, no drops. NAT exclusion are following on one side and oposite on the other: /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=accept src-address=192.168.89.0/24 dst-address=192.168.40.0/24 log=no log-prefix="&q...

RB SXT 5HPnD - upgrade from 6.38.5 to 6.39 successful RB 751U-2HnD - upgrade from 6.38.5 to 6.39 router keeps reloading default configuration after every reboot, tried reflashing, setting from scratch, but after reboot configuration is wiped and default is loaded - this is really bad. Reverting to 6...

Hello all, I have a trouble to pass traffic through IPSec tunnel between two sides. Both sides running latest RouterOS 6.38.5 Site A: RB333 behind several NATs initiator of IPSec communication 192.168.40.0/24 internal IP range Site B: RB2011UiAS-2HnD behind 1:1 NAT responder of IPSec communication 1...

Hello I have upgraded 2x RB750GL from v5.25 and v5.19 to v6.0 and after upgrade everything was OK. Now I tried reset to default using reset button/reset hole and I'm unable to connect to these routers. They seems to not have IP of any kind (both were default 192.168.88.1).
Can somebody help me please?