Community discussions

MikroTik App

Search found 43 matches

by andyanthoine
Wed Jan 25, 2017 7:13 am
Forum: Wireless Networking
Topic: WIFI Bridge with two SXT : fine tuning, bandwith looks a bit low
Replies: 1
Views: 394

WIFI Bridge with two SXT : fine tuning, bandwith looks a bit low

Hi guys, I m using two SXT to do a wifi bridge. It works like a charm, but i'm far away from the theory in term of bandwith Anyone here has any config he did on his wireless that is "optimized" as much as possible, to have the best bandwith possible? What do you use? 802.1, nstreme etc ? If you coul...
by andyanthoine
Mon Sep 21, 2015 7:24 am
Forum: General
Topic: IPSec succeeds but L2TP fails to establish - client lonely
Replies: 13
Views: 10237

Re: IPSec succeeds but L2TP fails to establish - client lonely

As far as i m concerned, it works perfectly on my router, so i'll try to explain my setup First : PPP > Interface, click on L2TP Server Enable, same for USE IPSEC and put a ipsec key there Then : Create a user, with service : L2TP local and remote adress and a route Let's say your transport block is...
by andyanthoine
Wed Sep 16, 2015 8:03 am
Forum: General
Topic: Port Isolation
Replies: 2
Views: 1866

Re: Port Isolation

You don't even have to bother with vlan man. Let's say your modem is connected on port 1, and your pppoe configured on it. To separate everyone, just bridge the port you want Let's say port 2 and 3 need to be "together", just bridge them in a bridge called bridge-lan1 For port 4 and 5, bridge-lan2 A...
by andyanthoine
Wed Sep 16, 2015 7:59 am
Forum: General
Topic: securing L2TP/IPsec server connection
Replies: 15
Views: 7666

Re: securing L2TP/IPsec server connection

Hey guys!!! :D

Same thing here, setup the L2TP IPSEC with the MKT and realised people can connect without using the ipsec at all... making it not secure at all :p

Found anything on how to "force" it ?

Thanks ;)
by andyanthoine
Wed Sep 16, 2015 1:15 am
Forum: General
Topic: L2TP/Ipsec DNS PROBLEM
Replies: 0
Views: 491

L2TP/Ipsec DNS PROBLEM

Hi, I have a little problem with my DNS request when behind my VPN To make it "simple" I have a mikrotik acting as a core router / dialing up pppoe, and windows 2008r2 ad My mkt for DNS request has : the ip of my ad (for all the necessarry request), and the peer dns provided by my ISP, and ALLOW REM...
by andyanthoine
Thu Jul 30, 2015 1:22 am
Forum: General
Topic: Is SXT 2 or SXT Lite2 appropriate for connecting outdoor cameras
Replies: 5
Views: 783

Re: Is SXT 2 or SXT Lite2 appropriate for connecting outdoor cameras

As far as i m concerned, those AP works really well and should be able to make wifi bridge up to 2km. So you should be fine, but maybe contact a salesman for that kind of information. I m pretty sure DUXTEL (australian vendor), has a tool online to check that kind of thing, you should give it a look...
by andyanthoine
Wed Jul 29, 2015 8:47 am
Forum: General
Topic: Can't ping local machine from Router
Replies: 2
Views: 512

Re: Can't ping local machine from Router

Can you make a network diagram, i m not sure to really understand your ip plan there, but it seems pretty obvious that it can't work that way :)
by andyanthoine
Wed Jul 29, 2015 8:45 am
Forum: General
Topic: ONVIF Camera behind MKT, Can't make the NAT work...
Replies: 6
Views: 2667

Re: ONVIF Camera behind MKT, Can't make the NAT work...

VPN is an easy solution, and i know how to set it up, it's really not a problem, but that's not what i wanted, and didn't suit the need of the client i m setting that up for :)
by andyanthoine
Wed Jul 29, 2015 8:41 am
Forum: General
Topic: create a my own default configuration to run after reset configuration
Replies: 8
Views: 2147

Re: create a my own default configuration to run after reset configuration

That's something mikrotik really lack, a Config checker.
by andyanthoine
Wed Jul 29, 2015 8:28 am
Forum: General
Topic: Natting Issue urgent help needed ?
Replies: 9
Views: 1092

Re: Natting Issue urgent help needed ?

Upload the picture on a ftp or something, so it's accessible from the web, and put a link to it ;)
by andyanthoine
Tue Jul 28, 2015 12:57 am
Forum: General
Topic: ONVIF Camera behind MKT, Can't make the NAT work...
Replies: 6
Views: 2667

Re: ONVIF Camera behind MKT, Can't make the NAT work...

Ok it worked, pretty easy solution

Check MJPEG over http, change the MJPEG port on the camera, nat the port, end of story...
by andyanthoine
Tue Jul 28, 2015 12:56 am
Forum: General
Topic: Site to Site : Eoip vs VPN
Replies: 3
Views: 9210

Re: Site to Site : Eoip vs VPN

I m not a smart guy... ;) Didn't think about the broadcast on the moment when i wrote that, thought about it after, so clearly eoip is not a good idea. I'll certainly go for a L2TP IPSEC tunnel between those two site and route the traffic.

Thanks for the answers guys
by andyanthoine
Mon Jul 27, 2015 3:51 am
Forum: General
Topic: ONVIF Camera behind MKT, Can't make the NAT work...
Replies: 6
Views: 2667

Re: ONVIF Camera behind MKT, Can't make the NAT work...

Yeah, vpn could be a solution, but since it's on a end user, not really "good"with computers, it's adding some complexity, and if i could , iwould love to make it work with NAT As far as i checked, the port use for RSTP is 554, and there is a mjpeg over http port 8008 too. I m going to try MJPEG ove...
by andyanthoine
Mon Jul 27, 2015 3:47 am
Forum: General
Topic: routage intervlan dans un routerboard 750
Replies: 6
Views: 1127

Re: routage intervlan dans un routerboard 750

Désolé je réponds un peu quand je peux. A premiere vue tes vlan sont sur le meme port, juste sur un adressage différent, sauf erreur de mémoire, vis à vis du comportement par défaut, la communication est censé se faire sans problème. Est ce que tu as des regles de pare feu qui bloquent quelque part ...
by andyanthoine
Fri Jul 24, 2015 3:37 am
Forum: General
Topic: ONVIF Camera behind MKT, Can't make the NAT work...
Replies: 6
Views: 2667

ONVIF Camera behind MKT, Can't make the NAT work...

Hi guys, I spent some time on this problem, and can't figure what's going wrong, to be honest, i m not a master on the video stream part, and some input would be welcome. Here is my problem, i have 10 camera ip behind a mikrotik and i want to acces their stream from internet. What nat should i use, ...
by andyanthoine
Wed Jul 22, 2015 2:49 am
Forum: General
Topic: routage intervlan dans un routerboard 750
Replies: 6
Views: 1127

Re: routage intervlan dans un routerboard 750

A première vue t'es francais, vue le titre, donc je réponds en francais DHCP Server Configuration for VLANs: / Ip dhcp-server enable 0 / Server add Ip dhcp-interface = ether2 address-pool = pool-100 / Server add Ip dhcp-interface = ether2 address-pool = pool-200 Regarde tes interfaces, tu met le DHC...
by andyanthoine
Wed Jul 22, 2015 2:06 am
Forum: General
Topic: Feature Request - Notes
Replies: 9
Views: 1111

Re: Feature Request - Notes

If you really want that, there is an easy way to CHEAT ;)

Just create a SCRIPT, named NOTES (or whatever, you can have separates notes), and write inside, even if the script doesn't work you don't care as long as you don't schedule it :)

Easy notes ;)
by andyanthoine
Wed Jul 22, 2015 2:04 am
Forum: General
Topic: Need to Join all ether
Replies: 6
Views: 705

Re: Need to Join all ether

Just by adding the addresses to the internet, allows the router to route between them. You should not need anything addition to do that. Pinging 2.2.2.2 from 1.1.1.2 should work just fine. But these will be separate broadcast networks. If you are needing broadcasts to go between the interfaces, you...
by andyanthoine
Wed Jul 22, 2015 2:00 am
Forum: General
Topic: DNS is changing to 195.3.144.115
Replies: 6
Views: 880

Re: DNS is changing to 195.3.144.115

Has anybody else seen a Mikrotik router change its DNS IP to 195.3.144.115? We have several out in the field that apparently have changed themselves. I guess you use PPPOE on it ? Did you check the USE PEER DNS checkbox ? If yes, your DNS should be dynamic, if the provider changes them, it will upd...
by andyanthoine
Wed Jul 22, 2015 1:58 am
Forum: General
Topic: Creating a Single Blacklist of Multiple IP
Replies: 19
Views: 6749

Re: Creating a Single Blacklist of Multiple IP

I m interested by your automatic blacklist script, would you mind sharing ? What kind of mikrotik do you have to handle that much firewall entry? Thanks a lot My blacklists are currently private, but I have been working on a system to allow them to be downloaded by others. I'll see if I can finish ...
by andyanthoine
Wed Jul 22, 2015 1:29 am
Forum: General
Topic: Creating a Single Blacklist of Multiple IP
Replies: 19
Views: 6749

Re: Creating a Single Blacklist of Multiple IP

I m interested by your automatic blacklist script, would you mind sharing ? What kind of mikrotik do you have to handle that much firewall entry?

Thanks a lot
by andyanthoine
Wed Jul 22, 2015 12:50 am
Forum: General
Topic: Site to Site : Eoip vs VPN
Replies: 3
Views: 9210

Site to Site : Eoip vs VPN

Hi guys, I was wondering something about EOIP. I m going to need to connect a remote site to our main site, i was thinking on putting a EOIP link in a tunnel to avoid different networks etc What do you think is best, considering everything is going to be in the same network, let's say a 192.168.0.0/...
by andyanthoine
Tue Mar 17, 2015 11:13 pm
Forum: General
Topic: The dude, Is it dead ? Official answer please, normis?
Replies: 3
Views: 944

Re: The dude, Is it dead ? Official answer please, normis?

I love people like you, just answering to be a douche... instead of being helpful
by andyanthoine
Mon Mar 16, 2015 5:57 am
Forum: General
Topic: The dude, Is it dead ? Official answer please, normis?
Replies: 3
Views: 944

The dude, Is it dead ? Official answer please, normis?

Hi guys, I m using the dude a lot to monitor all my mikrotik, and i guess i m not the only one, there are a few annoying bugs and i would love to know if i should really think about using something else, or if the dude is still alive ? Can we get an official answer about it ? is the dude dead? any E...
by andyanthoine
Sun Jan 25, 2015 11:12 pm
Forum: General
Topic: Update / Hardware Change
Replies: 0
Views: 362

Update / Hardware Change

Hi guys, I've been using mikrotik products for quite some time now (2 years), love it "most of the time..." ;) Problem is, i always had bad experience with updating them from old to new version (5.X, not the new 6.X) I have a 5.20 RB751U-2HnD (mipsbe) that i would like to update to the last 6.X vers...
by andyanthoine
Wed Oct 01, 2014 1:51 am
Forum: General
Topic: Mass configuration
Replies: 18
Views: 6377

Re: Mass configuration

Ok man, i'll explain you what's wrong, pretty sure it will work. Sorry but i didn't try it, but i think i work with enough mikrotik to be sure of my answer ;) What you should do is first, do a reset factory of your mkt, it will give you the default configuration. /export the configuration Then, in t...
by andyanthoine
Thu Jul 17, 2014 1:04 am
Forum: General
Topic: Help with VLan and multiple SSID
Replies: 2
Views: 957

Re: Help with VLan and multiple SSID

It's pretty easy to achieve. If you want some help about that, it would be pretty easier for people reading your post, if you could draw it with something like gliffy (it's free and online). Put your vlan, dhcp, everything on it, it's more visual. I'll see if i can help you after looking at your dia...
by andyanthoine
Mon May 19, 2014 12:13 am
Forum: General
Topic: Using MKT as a VPN SERVER with RADIUS and VRF
Replies: 3
Views: 1195

Using MKT as a VPN SERVER with RADIUS and VRF

Hi guys, I m actually having a few problems with my mkt. I m trying to make my MKT a VPN server, authentification done by connecting to a radius i have. But i have 2 problems : - How can i tell my radius, to use the VRF i setup, this bitch is using my main routing table, and i don't want that... i h...
by andyanthoine
Sun Jan 26, 2014 10:58 pm
Forum: Wireless Networking
Topic: 2 VLAN in mikrotik - 1 VLAN for mngmnt and 1 VLAN for WiFi
Replies: 2
Views: 4911

Re: 2 VLAN in mikrotik - 1 VLAN for mngmnt and 1 VLAN for Wi

Hi man, i m trying to configure something really close to your configuration, would you mind maybe sending me at andy.anthoine@gmail.com please?

Regards

Andy
by andyanthoine
Fri Jan 24, 2014 1:32 pm
Forum: General
Topic: DHCP + VLAN Problem
Replies: 1
Views: 623

Re: DHCP + VLAN Problem

Anyone? :(
by andyanthoine
Fri Jan 24, 2014 12:48 am
Forum: General
Topic: DHCP + VLAN Problem
Replies: 1
Views: 623

DHCP + VLAN Problem

EDIT : added a quick picture of my network, and the configuration Hi, I m having some issues with my network configuration. Let me explain I got a mikrotik central, calling it C I got another one on a distant site, calling it D And i got a wifi ap working with vlan, calling it W On W i got two wifi,...
by andyanthoine
Wed Sep 18, 2013 1:22 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

Man i would seriously love it. The support is like fucking useless, add me on skype if you want, enova-andy Just so you understand my problem right, i can reach computer on the other subnet ( \\192.168.142.X\c$ is working from a 141 computer, but it's not really fast, like 30s waiting time, i think ...
by andyanthoine
Mon Sep 16, 2013 8:44 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

winbox but i also use the terminal inside winbox
by andyanthoine
Mon Sep 16, 2013 8:07 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

Nothing at all, i even started from scratch and it's not working, that's why i m asking if anyone could provide a working conf to try to understand where the problem is I even tried to reset the router, put an address on an interface, another one on the second one. Put my two computer in static ip, ...
by andyanthoine
Fri Sep 13, 2013 1:12 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

Ok, so, i just tried, total reset of the router, no configuration, just configured the dhcp, adresses on the interfaces i needed, and the basic default firewall rules the mikrotik add + one that clearly specify that from 141 you can talk to 142 etc. Tell me where it's wrong... : / can't solve that s...
by andyanthoine
Fri Sep 13, 2013 12:39 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

I'll try that and tell you what happens.

Thanks a lot guys

PS : the bridge configuration is the one by default
by andyanthoine
Thu Sep 12, 2013 2:18 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

I don't think it's a solution. Mascarading the pppoe-direction isn't supposed to do anything but give this to all my bridge/interface right ? My pppoe is not even connected at the moment, and i don't see why i would need it to go from ETH2 to ETH3 ? Can you please explain that ? cuase i m not sure i...
by andyanthoine
Thu Sep 12, 2013 1:22 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

The client on port 2 get the 141 dhcp as you can see in the config, and those on the 3 get the 142.

Everyone on the same subnet can talk to each other, there is no problem about that.
by andyanthoine
Thu Sep 12, 2013 12:43 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

The only interface up are the 1 2 and 3 I m putting them in the bridge, cause for the moment, i m only using those 3, but in a near future, i will add more port to those bridge :) And you can't see the route configuration for a simple reason, they are all dynamics. Flags: X - disabled, A - active, D...
by andyanthoine
Thu Sep 12, 2013 12:17 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

Re: 2 different interface with 2 subnet : make them talk...

Here is the configuration # jan/02/2002 06:47:40 by RouterOS 6.3 # software id = 9LFB-WFVQ # /interface bridge add admin-mac=D4:CA:6D:E6:24:A7 auto-mac=no l2mtu=1598 name=bridge-local \ protocol-mode=rstp add name=bridge-local-2 /interface ethernet set 0 name=ether1-gateway set 3 disabled=yes set 4 ...
by andyanthoine
Wed Sep 11, 2013 8:47 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 26439

2 different interface with 2 subnet : make them talk...

Hi, My problem seems simple, if anyone could help there please :) I have an interface ETH2 with address 192.168.141.254 on a /24 subnet and a ETH3 with address 192.168.142.254 on a /24 Both have dhcp etc. I can't make a computer from the 141 subnet ping one from the 142 and same the other way. Could...
by andyanthoine
Mon Jun 24, 2013 1:09 am
Forum: General
Topic: Routing between VPN
Replies: 2
Views: 1078

Re: Routing between VPN

Image

There isn't any rule blocking ftp traffic, or any drop, what i need is that the 192.168.0.5 communicate with the 192.168.102.0/24 without interfering with site S :)

The vpn are PPTP actually.
by andyanthoine
Fri Jun 21, 2013 7:51 am
Forum: General
Topic: Routing between VPN
Replies: 2
Views: 1078

Routing between VPN

Hi, Excuse me, but i would love some help on a problem, i know i m near the solution but i can't find a way to make it work. Let me explain my problem I have 3 distant site, connected by VPN SITE N : Ftp server 192.168.0.5 Mikrotik Router : 192.168.0.1 Local VPN Address : 10.0.0.2 (vpn between S and...