/interface/wifi/radio/print detail
/interface wifi print
/export file=anynameyoulike
You are very welcome. The radio mac address van be found on the Radios tab (in Winbox).Perfect, thank you very much. I will do the configuration and report back.
/export file=anynameyoulike
What is it doing? What is consuming all the cpu cycles?i think what it really slows down is 100% cpu all the time
/export file=anynameyoulike
As you know, assumption is the mother...etc.Is there a chance to escalate this issue? It seems that the developers of RouterOS 7.x do not know anything about this.
YesAre the current rules “good enough”?
/export file=anynameyoulike
/export file=anynameyoulike
Sure you want to have a switch act as a router?I want to use one as the main router and the other as a regular switch, creating an uplink between the two via the SFP port.
Is this possible?
YesThanks. Just to be specific both CAP AX and WAP AX data sheets state "PoE in .. 802.3af/at". Can they in fact also be powered by passive PoE?
/export file=anynameyoulike
Do you have a partner?Why size would influence the decision? Being bigger I mean. Trying to understand
/interface wifi channel add band=2ghz-ax disabled=no name=2ghz skip-dfs-channels=10min-cac width=20/40mhz
/interface wifi channel add disabled=no name=2ghz frequency=2412,2437,2462 width=20mhz
wAP can be securely fixed to any external wall or roof from the inside of the caseI would like to install it on the ceiling instead of an old cAP, do you think it is suitable or is the antenna very directional?
Can't help you with that. Still, from a conceptual perspective I would use a /interface/wifi/security item per ssid. Personal preference...Does it all work now, yes all good, I was just trying to reason why!
But I mean, 5 GHz should be able to do 2.4 GBits.
Anything could be wrong. Just to make sure...can you share your config?there must be something else wrong.. could it be my docking station part of the problem?
/export file=anynameyoulike
/interface/wifi/export
/export file=anynameyoulike
Running 7.17 beta4, mixed WPA2/WPA3 on dual cAP AX and wAP ac using multiple VLAN's. Windows/Linux/Android/iOS devices. Seems pretty stable. Disconnection caused by too weak signal. Installed yesterday, still have to do some testing.Anyway moving on... Has anyone tried WPA3 on 7.17 beta4 yet ?
/export file=anynameyoulike
Yes it is:But, is hAP ax³ capable of routing a 1 GBIT internet at full speed ?
/export file=anynameyoulike
Other approach: block everything and only allow what is allowed.Found a way to separate networks by Routing Rules
/interface ethernet switch vlan
add independent-learning=yes ports=ether1,switch1-cpu switch=switch1 vlan-id=90
add independent-learning=yes ports=ether2,ether3,ether4,ether5,switch1-cpu switch=switch1 vlan-id=100
Why not leave it open?security setting are WPA/WPA2/WPA3
Learning is...It's a real headache at times, isn't it?
/export file=anynameyoulike
/interface bridge port
add bridge=bridge1 interface=ether5 pvid=10
# optional
/interface bridge vlan
add bridge=BR1 tagged=bridge1 untagged=ether5 vlan-ids=10
Pretty sure you created an export, just in case this happens!? Especially after previous event...I really hope this doesn't mean I once again have to set up everything from scratch.
/export file=anynameyoulike
And after 19 years you decided to create an account just to post this message...sure.I have been playing with Mikrotik OS since 2005.
/export file=anynameyoulike
Do you have VLAN ID 1 configured?Can have someone any solution for this?
/export file=anynameyoulike
add action=accept chain=input comment="admin access" in-interface=Bridge-LAN \
src-address=192.168.0.0/24
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" disabled=yes \
dst-address=127.0.0.1
set-inform http://[IP address of controller]:8080/inform
Have you set fixed Admin MAC Address on the bridge for these devices?All my static leases for other Mikrotik devices got messed up after update to 7.16.
/export file=anynameyoulike
Then it might be helpfull to share your (wireless) configSame iPhone, upgraded to iOS 18; nothing changed with WiFi on ax^3.
/interface wifi export
/export file=anynameyoulike
What do you mean with mixed languages?I remember some Apple devices (at least in the past) could have issues with mixed languages on APs within the same SSID domain.
/system logging rulesCan someone point me to instructions for enabling wireless debug logging?
/export file=anynameyoulike
/export file=anynameyoulike
/export file=anynameyoulike
Actually, ICMP traffic is accepted. It is used for more then ping only.If I recall correctly however, ping (ICMP) is allowed inbound by default. I prefer to block this via firewall rule.
/export file=anynameyoulike
/export file=anynameyoulike
/export file=anynameyoulike
Depends on how you want it to work exactly. Fyi, legacy supports CAPsMAN forwarding, wifi-qcom(-ac) doesn't.Can someone help?
Add a drop rule on the forward chain that drops everything else:And how can i disable the port for everyone else
add action=drop chain=forward
better?Gentlemen, what is the difference between firmware V6 and V7, which is better?
/export file=anynameyoulike
Thanks gotsprings !The only thing I see in your config that jumps out at me is the independent-learning value.
/export file=anynameyoulike
/export file=anynameyoulike
Is it acceptable to you? That is all that matters.So, "down a couple of times" during a period of years can be considered acceptable, right?
The topic name might give an indicationWell, then start by describing the issue you need to resolve first.
/export file=anynameyoulike