Community discussions

MikroTik App

Search found 197 matches

by kometchtech
Sat Nov 11, 2023 1:46 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 90733

Re: v7.12 [stable] is released!

On my rb850gx2 I have no service, I updated it remotely and now it no longer responds.
I have also confirmed this situation.
I gave up and reverted to 7.11.2 with netinstall.
by kometchtech
Sat Dec 04, 2021 7:09 am
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 223052

Re: v7.1 [testing] is released!

無題.png I am also seeing the same problem. In my environment, restarting CCR1009 did not improve the CPU usage. Same here, I disabled ipsec and some routing filters that were migrated over, and everything is OK for now. Before that a reboot would help for a little, but then the IPSec connection woul...
by kometchtech
Sat Dec 04, 2021 5:31 am
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 223052

Re: v7.1 [testing] is released!

I saw my ccr1009 had 95+% utilization on 4 cores (represented as "networking" in the profile tool) and l2tp/ipsec (looked more like an ipsec issue) would not connect as a client. A reboot had everything back to normal. I did not get a supout.rif, but I will get one if I see the issue agai...
by kometchtech
Thu Aug 30, 2018 8:21 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 221439

Re: v6.43rc [release candidate] is released!

As usual, client PC under Routerboard can not connect with IPv6. Also, if you try to disable dhcp-snooping or option 82 again and enable it again, it is confirmed that the command times out. [Ticket#2018083022003334] Problems were solved by netinstalling Routerboard, which can not be connected norm...
by kometchtech
Thu Aug 30, 2018 10:50 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 221439

Re: v6.43rc [release candidate] is released!

As usual, client PC under Routerboard can not connect with IPv6.
Also, if you try to disable dhcp-snooping or option 82 again and enable it again, it is confirmed that the command times out.

[Ticket#2018083022003334]
by kometchtech
Sat Aug 25, 2018 3:53 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 221439

Re: v6.43rc [release candidate] is released!

I updated to rc64, but it seems I can not communicate with ipv6. There was no problem with at least rc56.
We used netinstall to reintroduce rc64, but the situation has not changed.
by kometchtech
Sun May 06, 2018 3:53 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 211531

Re: Blacklist Filter update script

  • I think that I am pleased if I can pay annually and discounted.
  • I am glad that payment can be made with paypal.
by kometchtech
Tue Apr 24, 2018 7:59 am
Forum: General
Topic: Anyone else getting flooded by this forum?
Replies: 11
Views: 2503

Re: Anyone else getting flooded by this forum?

You should be able to change the notify setting from the following items in "User Control Panel".
by kometchtech
Fri Apr 13, 2018 5:32 pm
Forum: RouterBOARD hardware
Topic: CRS Netinstall stuck on junmping to kernel code
Replies: 26
Views: 22616

Re: CRS Netinstall stuck on junmping to kernel code

I came back from RMA for the time being.
(It is unknown what kind of correspondence was done)
However, after confirming startup, Fault-led became lit this time, so it became RMA compatible again ...
by kometchtech
Tue Mar 27, 2018 1:37 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 188486

Re: v6.42rc [release candidate] is released!

Neighbors search sometimes seen, sometimes not in winbox. (CRS326) I am also experiencing this phenomenon. It seems that it takes a tremendous amount of time to search RB from Winbox (3.12). After about 10 minutes, I saw some things. - CCR1009-8G1S-S+ - RB850Gx2 - RB2011UAS The following RBs were n...
by kometchtech
Tue Feb 13, 2018 6:41 am
Forum: RouterBOARD hardware
Topic: CRS Netinstall stuck on junmping to kernel code
Replies: 26
Views: 22616

Re: CRS Netinstall stuck on junmping to kernel code

Hello nuru,

I experienced the same symptoms.
I got the cooperation of Mikrotik support, but eventually I was instructed RMA.
I think that it is better to tell the support details to the symptoms. After that, as I think, you will be directed to RMA.

Best regards.
by kometchtech
Thu Feb 08, 2018 12:24 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 188486

Re: v6.42rc [release candidate] is released!

Version 6.42rc23 has been released. Changes since previous release: *) console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only); *) crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding *) disk - fixed disk related processes becoming unre...
by kometchtech
Fri Jan 26, 2018 3:12 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 188486

Re: v6.42rc [release candidate] is released!

Hello everyone, Regarding CRS317, when updating from ROS6.42rc12 to ROS6.42rc14, it stopped with 'jumping to kernel code' and it can not be started. Before I mention, CRS317 in my environment has not succeeded in updating packages from system -> package so far. I have already told this about Mikroti...
by kometchtech
Wed Jan 10, 2018 7:28 am
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 138906

Re: v6.41 [current]

Limited troughput between RB951G & RB751u2HnD, I use cat5e cable and as seen in the pict it's 100Mbps FD link, https://s13.postimg.org/5er2hhi3n/RB951-_TPethertest.jpg https://s13.postimg.org/p9d43n7lv/RB751-_TPethertest.jpg I tried to connect my laptop to RB951(connected to ONT-UFB) then did B...
by kometchtech
Wed Dec 20, 2017 9:09 am
Forum: Wireless Networking
Topic: CAPsMAN with two SSIDs
Replies: 10
Views: 7535

Re: CAPsMAN with two SSIDs

Excuse me. There were too few comments. Probably, you need to specify the following parameters and specify the RBs to reflect the setting by CAPsMAN. identity-regexp (string; Default: ) radio-mac (MAC address; Default: 00:00:00:00:00:00) # For radio-mac, it does not work with Empty MAC, and after al...
by kometchtech
Wed Dec 20, 2017 8:21 am
Forum: Wireless Networking
Topic: CAPsMAN with two SSIDs
Replies: 10
Views: 7535

Re: CAPsMAN with two SSIDs

I set it like the following, but without problems, master and slave are enabled. /caps-man provisioning add action=create-dynamic-enabled hw-supported-modes=gn \ master-configuration=cfg6-g name-format=prefix-identity \ radio-mac=D4:CA:6D:xx:xx:xx slave-configurations=cfg5-g Version is RouterOS6.41r...
by kometchtech
Tue Dec 19, 2017 2:37 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206686

Re: v6.41rc [release candidate] is released! New bridge implementation!

Successfully updated a CRS109-8G-1S-2HnD to version 6.41rc66, then installed the firmware update to version 6.41rc65 and rebooted. Now the device is stuck at 'staring services', which is displayed on the lcd display. No link on interfaces... Anybody seen this? Is there any chance to recover without...
by kometchtech
Mon Dec 18, 2017 6:01 am
Forum: General
Topic: CCR1009-7G-1C-1S+ vs CCR1009-7G-1C-1S+PC
Replies: 18
Views: 6543

Re: CCR1009-7G-1C-1S+ vs CCR1009-7G-1C-1S+PC

I owned CCR1009-8G-1S-1S+PC before model change of CCR1009-7G-1C-1S+PC, but Japan's hot and humid summer was truly a tough feeling with passive cooling.(At least when used at home dining) It was getting hot enough to touch at least, and there is memory that there was not much effect even if CPU down...
by kometchtech
Fri Dec 15, 2017 2:33 am
Forum: Wireless Networking
Topic: Can't change country
Replies: 10
Views: 7938

Re: Can't change country

In what procedure tried to change the setting?

webfig, winbox, or ssh?
by kometchtech
Fri Dec 15, 2017 2:31 am
Forum: Wireless Networking
Topic: Problem with haP AC
Replies: 9
Views: 2570

Re: Problem with haP AC

How about reviewing the following parameters of /interface wireless ? distance (integer | dynamic | indoors; Default: dynamic) adaptive-noise-immunity (ap-and-client-mode | client-mode | none; Default: none) After that, are country and frequency-mode properly set up? https://wiki.mikrotik.com/wiki/M...
by kometchtech
Tue Dec 12, 2017 2:19 pm
Forum: Announcements
Topic: v6.40.5 [current]
Replies: 82
Views: 42273

Re: v6.40.5 [current]

Thanks normis.

Was there any such circumstance in this information ...

For the time being, I will try to keep this situation still.

Best regards.
by kometchtech
Tue Dec 12, 2017 3:42 am
Forum: Announcements
Topic: v6.40.5 [current]
Replies: 82
Views: 42273

Re: v6.40.5 [current]

Dear Mikrotik Team

A DoS vulnerability has been released to RouterOS 6.40.5.

https://cve.mitre.org/cgi-bin/cvename.c ... 2017-17538
https://www.exploit-db.com/exploits/43317/

What kind of schedule is correspondence such as update?

Best regards.
by kometchtech
Mon Dec 11, 2017 12:18 pm
Forum: Wireless Networking
Topic: MAP / CAPSMAN SETUP
Replies: 6
Views: 2691

Re: MAP / CAPSMAN SETUP

For the time being we can consider about the following two points. 1. Configure the VLAN and decide whether to deliver the DHCP by a logical route. 2. Set filter for payout from DHCP to bridge interface. Ex) /interface bridge filter> add action=drop dst-port=67,68 src-port=67,68 in-bridge=bridge1 Ho...
by kometchtech
Fri Dec 08, 2017 1:06 pm
Forum: Wireless Networking
Topic: MAP / CAPSMAN SETUP
Replies: 6
Views: 2691

Re: MAP / CAPSMAN SETUP

Even in my environment, I have enabled "client-to-client-forwarding" in access-list and measured it, but problems such as extremely slow has not occurred. Another parameter can be set. Since datapath also has the setting "client-to-client-forwarding" , enabling this may not cause...
by kometchtech
Fri Dec 08, 2017 7:21 am
Forum: Wireless Networking
Topic: MAP / CAPSMAN SETUP
Replies: 6
Views: 2691

Re: MAP / CAPSMAN SETUP

I am sorry if I made a mistake. 1, as long as the connection parameter client-to-client-forwarding is enabled in capsman 's access-list , clients connected to the same MAP should be able to communicate with each other. https://wiki.mikrotik.com/wiki/Manual:CAPsMAN#Access_List 2. I think that you can...
by kometchtech
Fri Dec 08, 2017 7:05 am
Forum: Beginner Basics
Topic: CAPsMAN and config Channel Width (Local forwarding)
Replies: 1
Views: 910

Re: CAPsMAN and config Channel Width (Local forwarding)

In order to set the wireless band, extension channel, bandwidth, it should be set with the following items.

/caps-man channels
https://wiki.mikrotik.com/wiki/Manual:C ... nel_Groups
by kometchtech
Thu Dec 07, 2017 2:44 am
Forum: Wireless Networking
Topic: Default Forward disabled, yet devices can still ping? [SOLVED]
Replies: 3
Views: 4123

Re: Default Forward disabled, yet devices can still ping? [SOLVED]

If two or more client PCs access the same AP and Client to Client Forwarding is unchecked, if you believe the description of the wiki, you should not be able to connect between clients. https://wiki.mikrotik.com/wiki/Manual:CAPsMAN Did you check with support? Likewise, as for the Default Forward opt...
by kometchtech
Thu Dec 07, 2017 2:28 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206686

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) capsman - use "adaptive-noise-immunity" value from CAP local configuration; I'd like to know a bit more about this change. I believe this is similar to how antenna gain setting is being handled. Simply set the desired value of the adaptive-noise-immunity option in your radio interface ...
by kometchtech
Wed Dec 06, 2017 4:25 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206686

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) capsman - use "adaptive-noise-immunity" value from CAP local configuration; I'd like to know a bit more about this change. Although "adaptive-noise-immunity" is read from CAP, it is correct by recognizing that setting value at that time will be read by setting with CAP Wirele...
by kometchtech
Tue Dec 05, 2017 3:07 am
Forum: General
Topic: PPPoE client default MTU
Replies: 25
Views: 29263

Re: PPPoE client default MTU

Using NTT's environment in Japan, the MTU / MRU is 1454.
by kometchtech
Fri Dec 01, 2017 4:15 pm
Forum: General
Topic: Feature requests
Replies: 1740
Views: 624976

Re: Feature requests

Despite being asked before in the past. It seems that implementation of Wireguard is planned for the future Kernel. https://www.phoronix.com/scan.php?page=news_item&px=Linux-4.15-Unmerged-Features I would like you to consider implementing this function which has high encryption strength and exce...
by kometchtech
Sat Nov 25, 2017 5:55 am
Forum: Wireless Networking
Topic: Dell 1802
Replies: 1
Views: 730

Re: Dell 1802

Hello.

What equipment do you use?
What is the version of RouterOS?
When output is set to wireless debug in log, what kind of output is done?
Can I disclose the wireless LAN settings?

If you know this area, someone may be able to help you.
by kometchtech
Wed Nov 15, 2017 8:47 am
Forum: General
Topic: Testing of an untypical spare link
Replies: 1
Views: 796

Re: Testing of an untypical spare link

Hello, I am sorry if I made a mistake. Is it normal to recognize that you want to use "3_MAIN" and switch to "2_BACKUP" if there is something wrong? If you do not consider WAN loadbalance or ECMP and only simple failover, you just need to change the distance of "/ ip route&q...
by kometchtech
Tue Nov 14, 2017 10:44 am
Forum: General
Topic: Routing Mark stopped working properly
Replies: 4
Views: 1315

Re: Routing Mark stopped working properly

If you are using fasttrack, as you can see, we can not apply it to rules of filter or mangle.

https://wiki.mikrotik.com/wiki/Manual:IP/Fasttrack
Warning: Queues (except Queue Trees parented to interfaces), firewall filter and mangle rules will not be applied for FastTracked traffic.
by kometchtech
Tue Nov 14, 2017 6:05 am
Forum: General
Topic: dual wan route problem
Replies: 1
Views: 873

Re: dual wan route problem

Do you want to operate with ECMP?
https://wiki.mikrotik.com/wiki/ECMP_loa ... masquerade

Or, do you want the operation in the load balancing in a little more complex shapes?
https://wiki.mikrotik.com/wiki/Improved ... e_Gateways
by kometchtech
Thu Nov 09, 2017 2:20 am
Forum: General
Topic: Killer uptime :)
Replies: 1
Views: 972

Re: Killer uptime :)

Is it about RB 250 GS visible on the top of the list? Although firmware seems to be old with 1.6, is uptime recognized on SwOS side abnormal? Or is there something wrong with the display of Uptime displayed on the RouterOS side? If you can try it, how about updating to SwOS 1.17 (latest)? https://mi...
by kometchtech
Thu Nov 02, 2017 7:26 am
Forum: General
Topic: Route Cache disabled with Fast Path
Replies: 6
Views: 5628

Re: Route Cache disabled with Fast Path

I'm sorry from the side. It is very worrisome information. If disabling Route cache does not affect performance and resources can be saved, I think it's a pleasure. I think that below points about fast-track, but I would like to obtain that information for the future as well. Why not update fast pat...
by kometchtech
Tue Oct 31, 2017 2:09 pm
Forum: Announcements
Topic: MikroTik used by Amazon in their cloud datacenters
Replies: 33
Views: 32575

Re: MikroTik used by Amazon in their cloud datacenters

really? !
I think this is wonderful news.
by kometchtech
Mon Oct 16, 2017 10:33 am
Forum: Announcements
Topic: RouterOS (v6.39.3, v6.40.4, v6.41rc) NOT affected by WPA2 vulnerabilities
Replies: 58
Views: 149822

Re: RouterOS NOT affected by WPA2 vulnerabilities

Basically, is it OK to understand Routerboard with AP function as target?
If you are using the CAPsMAN function with Rotuerboard without AP function, is this Routerboard also applicable?
by kometchtech
Thu Oct 12, 2017 7:12 am
Forum: General
Topic: Increasing occurances of port flapping RB3011
Replies: 5
Views: 2738

Re: Increasing occurances of port flapping RB3011

As other people say, when downgrading from rc to stable, basically hw-offload should be unusable. However, as far as I tried why the port added to the bridge was not recognized, so (since it is not recognized, you can not delete the port), if a long downtime is not acceptable I think that should not...
by kometchtech
Wed Oct 04, 2017 9:43 am
Forum: General
Topic: RouterOS affected by Dnsmasq security vulnerabilities?
Replies: 1
Views: 1412

Re: RouterOS affected by Dnsmasq security vulnerabilities?

Hi! Is RouterOS (and if yes which versions) affected by the CVE-2017-14491, CVE-2017-14492, CVE-2017-14493, CVE-2017-14494, CVE-2017-14495, CVE-2017-14496, CVE-2017-13704 which where released by Google? https://security.googleblog.com/2017/10/behind-masq-yet-more-dns-and-dhcp.html I'm asking as I f...
by kometchtech
Thu Sep 14, 2017 6:39 am
Forum: General
Topic: If distance and scope are the same value, how will the default gateway be determined?
Replies: 2
Views: 1759

Re: If distance and scope are the same value, how will the default gateway be determined?

Hello, tomaskir Thank you for your answer. Indeed, I understood. In my way of using, it seems that there is no problem just by adjusting the distance. It seems that you do not have to use this scope for this time, but I will study for the future. But, for multiple WAN interfaces, do you know somethi...
by kometchtech
Wed Sep 13, 2017 4:16 pm
Forum: General
Topic: If distance and scope are the same value, how will the default gateway be determined?
Replies: 2
Views: 1759

If distance and scope are the same value, how will the default gateway be determined?

Hello, Please tell me about route. The wiki has about the route, the wiki has the following page explanation. https://wiki.mikrotik.com/index.php?title=Manual:IP/Route&redirect=no#Nexthop_lookup Suppose there are multiple interfaces connected to the WAN as shown below. -DHCPv4-client -pppoe-out1...
by kometchtech
Mon Sep 11, 2017 4:29 pm
Forum: General
Topic: Route setting on 3 WAN + 1 LAN
Replies: 0
Views: 854

Route setting on 3 WAN + 1 LAN

Hello, everyone Please tell us about Route settings in the case of the following environments. There are three WAN interfaces and one LAN interface. -WAN interface Eth1 (DHCPv4 and DHCPv6) Eth2 (IPv4 PPPoE and VPN) Eth3 (IPv4 PPPoE(Dial ondemand)) -LAN interface bridge1 (192.168.1.1/24) Basically, w...
by kometchtech
Wed Aug 02, 2017 2:01 pm
Forum: Announcements
Topic: Newsletter 77
Replies: 40
Views: 25071

Re: Newsletter 77

new CRS317-1G-16S+RM with 16 x SFP+ cages, $399
Traffic Generator tool
MUM 2017 schedule
It is good information.

Three of the above are worrisome, maybe it will be interesting if you can come to Japan about LTE kit if possible?
by kometchtech
Mon Jul 17, 2017 4:34 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 64741

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Unable to export configuration to a file Is anyone else having this issue? I can run /export from the CLI, but if I do: /export file=x (or /export file="x") No files get created. I had the same problem yesterday. RB2011UAS :-? I thought I was too stupid to find the file. ISSUE since rc38 ...
by kometchtech
Fri Apr 14, 2017 3:29 am
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 390
Views: 137837

Re: v6.39rc [release candidate] is released

When I upgraded to ROS v6.39rc62, the following Firewall rule brought my outside access to a crawl: /ip firewall filter add chain=forward action=fasttrack-connection connection-state=established,related Once I disabled it, the system began to work normally. This is the same with the current release...
by kometchtech
Tue Oct 11, 2016 3:27 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 121904

Re: v6.38rc [release candidate] is released

>*) ethernet - optimized packet processing on low load when irq re-balance is not necessary;

This is how much effect can be expected?
How much throughput can be expected?
by kometchtech
Thu Jul 21, 2016 8:10 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 320
Views: 102007

Re: v6.37rc [release candidate] is released, only one wireless package!

Hi, MT support

Check for update cannot download the rc version of the mips and ARM files would be forgotten place?

My best regards.
by kometchtech
Fri Apr 29, 2016 2:16 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106318

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Version 6.36rc9 has been released. Changes since previous version: *) arm - added Dude server support; *) arm - fixed kernel failure on low memory; *) discovery - fixed identity discovery (introduced in 6.36rc5 and 6.35.1); *) firewall - added "/interface list" menu which allows to create...
by kometchtech
Wed Apr 27, 2016 3:35 pm
Forum: Announcements
Topic: SwOS version 1.15 released
Replies: 28
Views: 16203

Re: SwOS version 1.15 released

Upgraded from v1.14
after reset to default error is still there
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Image
I also experiencing the same situation.

It's occurring only in Internet Explorer.
by kometchtech
Tue Apr 26, 2016 3:36 pm
Forum: Announcements
Topic: v6.35.1 [current] is released!
Replies: 84
Views: 35766

Re: v6.35.1 [current] is released!

I get error in SNMP and script.
That seems to dissolve after restarting.
The identity also seems to disappear.

12:47:21 snmp,warning timeout while waiting for program 24
12:48:04 script,warning DefConf: Unable to find wireless interface(s)

After the log does not include the Timezone.
by kometchtech
Fri Apr 22, 2016 3:13 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106318

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Routerboard mipsbe system raise the bootloop.

ROS6.36rc5
by kometchtech
Tue Apr 19, 2016 4:27 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106318

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

have the USB disk is not detected by the RB3011.

[Ticket#2016041966000617]
by kometchtech
Mon Apr 04, 2016 3:38 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177119

Re: v6.35rc [release candidate] is released, new wireless package!

And I am thinking "Current" is maybe 2 things in one: Feature + RC

Nightly -> Beta -> RC -> Feature -> Bugfix
+1
by kometchtech
Fri Apr 01, 2016 4:24 pm
Forum: Announcements
Topic: v6.34.4 [current] is released!
Replies: 30
Views: 22855

Re: v6.34.4 [current] is released!

I think bug in CPU Frequency

Image
+1
by kometchtech
Thu Mar 24, 2016 2:41 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177119

Re: v6.35rc [release candidate] is released, new wireless package!

Version 6.35rc41 has been released. Changes since previous version: *) bonding - fixed mac-address disappearance after reboot in specific setups; *) chr - fixed reboots with license and queues; *) quickset - fixed invalid date adjusted the signal threshold for the signal chart and refresh rate; If ...
by kometchtech
Wed Mar 23, 2016 12:10 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177119

Re: v6.35rc [release candidate] is released, new wireless package!

Just my environment has confirmed the phenomenon might end up flapping from the ether6 to the ether10 interface.

Routerboard:RB3011
ROS6.35rc37

[Ticket#2016032266000631]

My best regards.
by kometchtech
Tue Mar 22, 2016 4:26 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177119

Re: v6.35rc [release candidate] is released, new wireless package!

Flapping to and to apply RB3011 to the ROS35rc35 interface.
And trying to get the supout.rif file at the same time, it is LCD display buggy restarted without permission.

[Ticket#2016032266000631]
by kometchtech
Mon Mar 14, 2016 11:48 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177119

Re: v6.35rc [release candidate] is released, new wireless package!

In rc26, and it has been in CAPsMAN configuration, from the DHCP Server, which is activated in the other RB, has been confirmed a phenomenon in which the IP address is not passed. Moreover, instead of immediately occur, but after the elapse of a few hours if you are using. It has not been output, e...
by kometchtech
Sun Mar 13, 2016 1:59 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177119

Re: v6.35rc [release candidate] is released, new wireless package!

In rc26, and it has been in CAPsMAN configuration, from the DHCP Server, which is activated in the other RB, has been confirmed a phenomenon in which the IP address is not passed. Moreover, instead of immediately occur, but after the elapse of a few hours if you are using. It has not been output, es...
by kometchtech
Sat Jan 30, 2016 12:39 pm
Forum: Announcements
Topic: Winbox3.1 released!
Replies: 49
Views: 56483

Re: Winbox3.1 released!

RB3011UiAS-RM

It is a CPU frequency are not visible.
arm_635rc1.PNG
by kometchtech
Tue Dec 22, 2015 9:55 am
Forum: General
Topic: [security] DNS vulnerability check
Replies: 2
Views: 1957

Re: [security] DNS vulnerability check

Incident resolution.

Do not use BIND you to support it.
It is likely no effect.
by kometchtech
Sat Dec 19, 2015 4:24 pm
Forum: General
Topic: [security] DNS vulnerability check
Replies: 2
Views: 1957

[security] DNS vulnerability check

Hello, support

Thought on the Routerboard DNS BIND is used, the following CVE was issued.
Will the impact of this vulnerability is not in the DNS of the Routerboard?

https://kb.isc.org/article/AA-01317

My best regards.
by kometchtech
Fri Dec 18, 2015 5:37 am
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 200
Views: 66720

Re: 6.34 release candidate version topic!

*) ipsec - fix phase2 hmac-sha-256-128 truncation len from 96 to 128
This will break compatibility with all previous versions and any other
currently compatible software using sha256 hmac for phase2;
Want to know more details about this.
by kometchtech
Wed Dec 09, 2015 9:49 am
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 200
Views: 66720

Re: 6.34 release candidate version topic!

I install 6.34rc and Ipv6 per pppoe as dhcpv6 client has broken. I update to 6.34rc18 but status DHCPv6 Client is stoped. How run IPv6 ? Current situation seems to be able to support only at the command. [admin@Mikrotik] /ipv6 dhcp-client> add interface=ether5 request=prefix add-default-route=no po...
by kometchtech
Sat Dec 05, 2015 1:24 am
Forum: The Dude
Topic: The Dude is back! v6.34rc test build released
Replies: 269
Views: 103326

Re: The Dude is back! v6.34rc test build released

It is information happy dude project was alive.
by kometchtech
Sun Nov 08, 2015 4:47 am
Forum: Announcements
Topic: Newsletter 68
Replies: 57
Views: 26321

Re: Newsletter 68

hAP AC when??
+1
by kometchtech
Fri Oct 23, 2015 12:24 pm
Forum: General
Topic: Winbox 3 RC
Replies: 636
Views: 206397

Re: Winbox 3 RC

When I Virustotal, I have been to that it does not detect any AVG.
https://www.virustotal.com/en/file/86e9 ... /analysis/
by kometchtech
Fri Oct 23, 2015 12:22 pm
Forum: General
Topic: Winbox 3 RC
Replies: 636
Views: 206397

Re: Winbox 3 RC

New Winbox version is released!

What`s new in v3.0rc17:

*) discover older version RouterOS routers and SwOS switches as well;

http://www.mikrotik.com/download
How nice!
Personally glad that the search of SwOS of equipment has become faster.
by kometchtech
Sun Sep 27, 2015 1:22 am
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 202
Views: 64761

Re: v6.33rc release candidate

It is not know what has occurred from which version a little, but in ROS6.33rc15, Enabling TCP Syncookies, problems that can not be successfully redirect a page that requires a part of the authentication has occurred. How many people have similar problems have occurred? This, there has been a probl...
by kometchtech
Fri Sep 25, 2015 3:35 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 202
Views: 64761

Re: v6.33rc release candidate

It is not know what has occurred from which version a little, but in ROS6.33rc15, Enabling TCP Syncookies, problems that can not be successfully redirect a page that requires a part of the authentication has occurred.

How many people have similar problems have occurred?
by kometchtech
Tue Jul 28, 2015 4:05 pm
Forum: Announcements
Topic: Newletter 66
Replies: 31
Views: 14998

Re: Newletter 66

It is a good information! :D

@normis
I think that held MUM in Japan!
by kometchtech
Thu Jul 23, 2015 10:55 am
Forum: General
Topic: IGMP Snooping
Replies: 134
Views: 81613

Re: IGMP Snooping

+1 :D
by kometchtech
Tue Jul 21, 2015 10:54 am
Forum: General
Topic: [feature request] Graphing PINGS to IP address
Replies: 10
Views: 6204

Re: [feature request] Graphing PINGS to IP address

+1

I also agree.
by kometchtech
Sun Jul 19, 2015 3:24 am
Forum: General
Topic: Way of policy-based routing at the time of the Dual WAN
Replies: 0
Views: 781

Way of policy-based routing at the time of the Dual WAN

Hello, All When following such a structure, I would like to the routing process to Azure side, probably because you are using ECMP, routing to the Azure side fails to even. 図面1.jpg Will you what should be in such a case of setting? /ip route add check-gateway=ping distance=5 dst-address=10.0.0.0/11 ...
by kometchtech
Thu Jul 09, 2015 1:59 am
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 65045

Re: 6.30 released

Where is RouterBOOT v3.24 changelog in "http://wiki.mikrotik.com/wiki/RouterBOOT_changelog"?
According to heard, is Protect RouterBOOT related fixes.
For your device only change is that protected routerboot was not working
correctly. Now it is. You can disable pin hole reset now.
by kometchtech
Mon Jul 06, 2015 12:00 pm
Forum: Announcements
Topic: Dual band AP for home use, SSID same or different?
Replies: 62
Views: 53100

Re: Dual band AP for home use, SSID same or different?

I think it had separated the SSID so users are connected to both the easy-to-understand explicitly.
(Similar to, for example, Mikrotk2G and Mikrotik5G)
by kometchtech
Fri May 29, 2015 7:44 pm
Forum: General
Topic: Winbox 3 RC
Replies: 636
Views: 206397

Re: Winbox 3 RC

rc10 fixes crash
Part of the upgraded from listed in the Winbox3.0rc9 was RB no longer see.
# No output list
winbox.JPG
by kometchtech
Tue May 26, 2015 11:40 am
Forum: General
Topic: is mikrotik affected by CVE-2015-3036?
Replies: 3
Views: 1426

Re: is mikrotik affected by CVE-2015-3036?

very official answer: we do not use this
normis, thank you answers!
by kometchtech
Mon May 25, 2015 11:22 am
Forum: General
Topic: is mikrotik affected by CVE-2015-3036?
Replies: 3
Views: 1426

Re: is mikrotik affected by CVE-2015-3036?

I want from the official announcement about this.
by kometchtech
Fri May 22, 2015 3:29 am
Forum: General
Topic: want to exclude certain log messages
Replies: 1
Views: 843

want to exclude certain log messages

Hello, all even though a particular string in the log message emitted large amounts of trouble. Is something like below example. So in this case, how the logging exclusions do? My best regards. may/21 21:32:50 system,info address list entry added by admin may/21 21:32:50 system,info address list ent...
by kometchtech
Wed Apr 29, 2015 6:07 pm
Forum: Beginner Basics
Topic: I wanted to log output only when the specific processing.
Replies: 4
Views: 2001

Re: I wanted to log output only when the specific processing.

Thanks for the reply. You should do so in this case, exclude info and system? If the Prefix is in this case how do I specify what? /system logging add action=devnull prefix=address topics=!system,!info My best regards. Not sure i understand, but if you want to ommit logs on your router, you can achi...
by kometchtech
Wed Apr 29, 2015 4:41 pm
Forum: Beginner Basics
Topic: I wanted to log output only when the specific processing.
Replies: 4
Views: 2001

I wanted to log output only when the specific processing.

Hello, all Message similar to the following when adding multiple Address address-list the daily Script to exclude specific IP to make sure it is, but in large amounts of output. /ip firewall address-list remove [/ip firewall address-list find list=RU] add address=2.60.0.0/14 list=RU add address=2.92...
by kometchtech
Fri Feb 27, 2015 9:25 am
Forum: Announcements
Topic: Newsletter 64
Replies: 27
Views: 18530

Re: Newsletter 64

We need a Giigabit 5 Port / 8 Port product like that
And USB!
+1
by kometchtech
Thu Feb 05, 2015 6:05 am
Forum: General
Topic: Feature Request: filter for log viewer
Replies: 11
Views: 8353

Re: Feature Request: filter for log viewer

+1

Because good even command, I'm glad to be able to a little more finely filtering.
by kometchtech
Wed Feb 04, 2015 2:49 pm
Forum: General
Topic: RouterOS v6.26!
Replies: 69
Views: 32901

Re: RouterOS v6.26!

If you run the Check for update of Winbox, seems release notes are garbled.
by kometchtech
Mon Feb 02, 2015 10:30 am
Forum: General
Topic: Winbox 3 RC
Replies: 636
Views: 206397

Re: Winbox 3 RC

Winbox3rc2 If you're using the "Open In New Window" using by enabling, when the connection destination connection is lost in such as restarting, I want you to stop the window of Winbox come to start another. When the beta, the window only dialog comes out one I'm sure that was never to be ...
by kometchtech
Mon Feb 02, 2015 8:53 am
Forum: Beginner Basics
Topic: For filtering of log
Replies: 2
Views: 2096

For filtering of log

Hello, all Although log such as the following when you add all at once to the address list, etc. Script is output, I wonder Is there a way to suppress it? /system logging add action=memory topics=!system,!info 15:49:56 system, info address list entry removed by admin 15:49:56 system, info address li...
by kometchtech
Fri Jan 23, 2015 9:47 pm
Forum: General
Topic: Feature Request - Block Country by IP Using Firewall
Replies: 16
Views: 16167

Re: Feature Request - Block Country by IP Using Firewall

There is a web site that implements the Country Block function in the Script below.

http://blog.erben.sk/2014/02/06/country-cidr-ip-ranges/

Take more time and effort because it managed by Script, but the size of the log output increases.
by kometchtech
Fri Jan 23, 2015 8:47 pm
Forum: General
Topic: Winbox 3 RC
Replies: 636
Views: 206397

Re: Winbox 3 RC

Hello, all

Even uncheck the "Autosave Session", If you select another RB from the address list, known issues of checks will be back?

Save the file the file in the state that unchecked just in case, situation but saw by reading it did not improve.
by kometchtech
Mon Dec 22, 2014 12:50 pm
Forum: General
Topic: For VU#852879 of ntpd
Replies: 2
Views: 2151

For VU#852879 of ntpd

Hello

Although the following issues have been reported, or RouterOS is affected by this problem?

http://www.kb.cert.org/vuls/byvendor?se ... rchOrder=4
http://support.ntp.org/bin/view/Main/SecurityNotice
by kometchtech
Mon Dec 01, 2014 8:46 am
Forum: General
Topic: ROS 6.23RC9 bricks RB1100AH [Fixed]
Replies: 6
Views: 2840

Re: ROS 6.23RC9 bricks RB1100AH

Just in case.

Even RB850Gx2, I am sure that the Boot Loop has occurred at ROS6.23rc9.
Also contact the support for here I was.
by kometchtech
Tue Nov 18, 2014 10:21 am
Forum: Wireless Networking
Topic: For setting of supported-rates of CAPsMAN
Replies: 0
Views: 1163

For setting of supported-rates of CAPsMAN

Hello, everyone. CAP centrally manage and I'd like to but at CAPsMAN, was in the normal /interface wireless, but I do not see the item of supported-rates, or will not be set when it is under the control of CAPsMAN? In the case of Japan, I'm often on the relationship you are installing multiple acces...
by kometchtech
Fri Nov 07, 2014 7:39 am
Forum: General
Topic: MT ,, we need real stable version ,
Replies: 10
Views: 3542

Re: MT ,, we need real stable version ,

Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit high BW , and they ...
by kometchtech
Thu Nov 06, 2014 7:01 pm
Forum: Wireless Networking
Topic: For Provisioning of CAPsMAN
Replies: 5
Views: 4330

Re: For Provisioning of CAPsMAN

We have updated the wiki with the new info on the name-format and name-prefix
Hello, Uldis.

Thank you for quick answer!
You can try to check the contents!

Regards.
by kometchtech
Thu Nov 06, 2014 5:07 pm
Forum: Wireless Networking
Topic: For Provisioning of CAPsMAN
Replies: 5
Views: 4330

For Provisioning of CAPsMAN

Hello, all I want you to tell us about the Provisioning of CAPsMAN. In CAPsMAN v2, Name Format, but Name Prefix have been added, please tell me whether each of the selected parameters is where the subject. cap: refer to Remote CAP Name of [radio] tab? identity: to see the Remote CAP Identity of [rad...
by kometchtech
Wed Nov 05, 2014 5:13 pm
Forum: Wireless Networking
Topic: CAPsMAN Load Balancing?
Replies: 15
Views: 15380

Re: CAPsMAN Load Balancing?

we have updated the wiki on this setting: "Interface belonging to the load balance group accepts new clients only if amount of already connected clients is less than on the rest of interfaces from the same group." Thank you for updating the Wiki. In short "Load Balance Group" is...
by kometchtech
Tue Nov 04, 2014 6:55 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 38710

Re: v6.21.1 released

This is crazy... MT I would rather wait months for updates if you guys would test them properly! If you need BETA testing, make a different BETA branch for the firmware! How can think dev build of when such, if from being out in the Stable release a major bug up here, I want you to care a little mo...
by kometchtech
Tue Nov 04, 2014 6:23 pm
Forum: Wireless Networking
Topic: CAPsMAN Load Balancing?
Replies: 15
Views: 15380

Re: CAPsMAN Load Balancing?

Please explain what it means - load-balancing-group ?
It is this part I have to say.
Also there is no description in the Wiki for Load Balancing Group.
by kometchtech
Sun Nov 02, 2014 5:27 am
Forum: General
Topic: What happen with 6.21 ?
Replies: 26
Views: 9378

Re: What happen with 6.21 ?

When I have also apply RouterOS 6.22rc4 to CCR1009, and symptoms of the interface disappears,
it was possible to confirm the automatically restart takes problems when left for a while.

By switching back the same way partition ROS6.21, it was possible to avoid the problem somehow.

Just to be sure.
by kometchtech
Thu Oct 30, 2014 8:25 am
Forum: Wireless Networking
Topic: CAPsMAN Load Balancing?
Replies: 15
Views: 15380

Re: CAPsMAN Load Balancing?

Hi, how exactly does Load Balancing work? When I connected just one CAP to a CAPsMAN and added a Load Balancing Group to the provisioning rules, I got <mac>@<interface> rejected, not allowed due to load balancing Not nice. It works OK when there is NO Load Balancing Group... huh? Thank you in advan...
by kometchtech
Fri Oct 24, 2014 5:43 am
Forum: RouterBOARD hardware
Topic: [Q] Power of CCR1016-12S-1S + and CCR1009 or redundant?
Replies: 5
Views: 2299

Re: [Q] Power of CCR1016-12S-1S + and CCR1009 or redundant?

> Quindor

I am sorry. Writing style was bad. I have been redundant cable, but I wanted to make sure that it's redundant power supply unit also.

> Normis

Thank you for answer. It is known that the power supply unit is also redundant, I'm glad.

Regards.
by kometchtech
Thu Oct 23, 2014 10:01 am
Forum: RouterBOARD hardware
Topic: [Q] Power of CCR1016-12S-1S + and CCR1009 or redundant?
Replies: 5
Views: 2299

[Q] Power of CCR1016-12S-1S + and CCR1009 or redundant?

Hello, all.

There are two tours connecting power cable port of CCR1016-12S-1S + and CCR1009-8G-1S-1S + but,
what's a redundant configuration of only when the cable is disconnected?
Or, what has become redundant also inside the power supply?
by kometchtech
Mon Oct 06, 2014 10:13 am
Forum: General
Topic: Changelog for 6.21rc3
Replies: 1
Views: 2612

Re: Changelog for 6.21rc3

I also want information about the updates in ROS6.21rc3.
by kometchtech
Mon Sep 29, 2014 12:56 pm
Forum: General
Topic: V7 soon ?
Replies: 20
Views: 10706

Re: V7 soon ?

Maybe udpxy in Ros7, i guess it's not hard to implement such usefull tool?
+1 too.
by kometchtech
Wed Sep 10, 2014 12:22 pm
Forum: General
Topic: v6.17 SNMP - Interface Stats
Replies: 56
Views: 24508

Re: v6.17 SNMP - Interface Stats

Because if for zabbix, method of obtaining the SNMP has been changed to Bulk Request from Zabbix 2.2.3, if there is a value of the error in one template, subsequent data seems to fail to get. And seem to have been fixed in the corresponding Zabbix 2.3.3. https://support.zabbix.com/browse/ZBXNEXT-230...
by kometchtech
Fri Aug 08, 2014 5:30 am
Forum: General
Topic: [Help] RB912UAG-5HnD is no longer driven.
Replies: 1
Views: 1395

[SOLVED][Help] RB912UAG-5HnD is no longer driven.

Hello, all I am using a RB912UAG-5HnD, but they have already started where it was re-started by applying the ROS6.18. - I was pressing the reset button, but is not reset. - Netinstall also I tried, but I will stop with the message "partitioning and formating harddrive". How Will I say thi...
by kometchtech
Thu Aug 07, 2014 7:01 am
Forum: General
Topic: ATTENTION, DISASTER! V.6.17
Replies: 57
Views: 21138

Re: ATTENTION, DISASTER! V.6.17

RB SXT 2nD r2 5 devices from ~100 have bricked up after upgrade 6.15 to 6.17. no leds blinking, only beep signal on boot. recovered by netinstall with lost config. and 1 device just partly broke config (dhcp server, dns). i upgrade each firmware release and it first time in my practice //update tod...
by kometchtech
Thu Aug 07, 2014 6:59 am
Forum: RouterBOARD hardware
Topic: RB912UAG-5HPnD stopped booting
Replies: 2
Views: 1334

Re: RB912UAG-5HPnD stopped booting

My RB912 stopped booting. After power on all LEDS are ON except ETH, it's displaying link activity. Reset button changes nothing at all. No beep sounds, while they were present during normal operation - 1 beep on beginning and 2 short when board is fully booted up. I had tried another patchcord, an...
by kometchtech
Sun Aug 03, 2014 3:24 am
Forum: General
Topic: Will 7.0 be based on kernel 3.14?
Replies: 7
Views: 4038

Re: Will 7.0 be based on kernel 3.14?

At the same ... that I want you to respond to OpenFlow1.3 and Open vSwitch.
by kometchtech
Fri Aug 01, 2014 11:06 pm
Forum: General
Topic: [Help] RB912UAG-5HnD is no longer driven.
Replies: 1
Views: 1395

[Help] RB912UAG-5HnD is no longer driven.

Hello, all I am using a RB912UAG-5HnD, but they have already started where it was re-started by applying the ROS6.18. - I was pressing the reset button, but is not reset. - Netinstall also I tried, but I will stop with the message "partitioning and formating harddrive". How Will I say this...
by kometchtech
Wed Jul 30, 2014 3:08 pm
Forum: General
Topic: Superchannel 30Mhz, 60Mhz RB 912
Replies: 6
Views: 4804

Re: Superchannel 30Mhz, 60Mhz RB 912

Do you have access to the "account" section of the Mikrotik site? If not, register an account and then, after logging in, write to support and request to add this feature on your account. They will probably send you a declaration to sign and return to them (by mail is ok) and then will un...
by kometchtech
Wed Jul 30, 2014 2:53 pm
Forum: General
Topic: Superchannel 30Mhz, 60Mhz RB 912
Replies: 6
Views: 4804

Re: Superchannel 30Mhz, 60Mhz RB 912

português Pessoal Como posso Liberar o channel personalizado em 30 ou 60 Mhz em uma Rb 912? tentei mas a minha licença não permite (level4). inglês How Can I Unlock My customized channel 30 or 60 in a Rb 912 Mhz? I tried but my license does not permit (level4). obrigado Wireless Advanced Channels a...
by kometchtech
Mon Jul 28, 2014 9:31 pm
Forum: General
Topic: ATTENTION, DISASTER! V.6.17
Replies: 57
Views: 21138

Re: ATTENTION, DISASTER! V.6.17

Same problem here. Two RB912UAG-2HPnD-OUT (BaseBox2) died shortly (1-2 days) after upgrading to 6.17. One of them was totally inaccessible, on the other the (hardware) wlan interface had dissapeared. Had to netinstall 6.15 to revive them. Both of them were installed in a hotel and died during peak ...
by kometchtech
Mon Jul 28, 2014 3:27 pm
Forum: General
Topic: 7.0?
Replies: 44
Views: 18518

Re: 7.0?

It is a further demand after, but I want to raise 3.13 or later kernel for the following reasons. - (It is supported by kernel 3.5 ) corresponding to the L2TPv3 over IPv6 - (For the support of a DoS attack) (it is supported by kernel 3.6) the abolition of the IP routing cache function - (It is suppo...
by kometchtech
Mon Jul 28, 2014 8:22 am
Forum: General
Topic: 7.0?
Replies: 44
Views: 18518

Re: 7.0?

I hope the Web UI is much better.
some of my friend say that the Mikrotik Web UI is not user friendly enough.
I also agree.
I want you to become a mechanism, such as can be a little more custom.
If I only replace the language in json like now, but I think unfriendly user too.
by kometchtech
Mon Jul 28, 2014 5:57 am
Forum: General
Topic: How to build a Wi-Fi roaming environment of using CAPsMAN
Replies: 11
Views: 10811

Re: How to build a Wi-Fi roaming environment of using CAPsMA

Doesn't matter if it's in the spec or not. Zero handoff roaming is a no brainer requirement for a centrally managed ap environment. Capsman was the first step. Now the blanks need to be filled in for it to become a true enterprise wireless system. I understand that requirement difficult Zero handof...
by kometchtech
Sat Jul 26, 2014 10:28 pm
Forum: General
Topic: How to build a Wi-Fi roaming environment of using CAPsMAN
Replies: 11
Views: 10811

Re: How to build a Wi-Fi roaming environment of using CAPsMA

There is no provision in the 802.11 spec currently for AP assisted roaming. Its currently all up to the clients wifi drivers. There isn't even a provision in the spec as to when a client should roam. The only difference between using CAPsMAN and setting up discrete access points all configured the ...
by kometchtech
Sat Jul 26, 2014 10:26 pm
Forum: General
Topic: How to build a Wi-Fi roaming environment of using CAPsMAN
Replies: 11
Views: 10811

Re: How to build a Wi-Fi roaming environment of using CAPsMA

The only thing that is not connected to the seamless, but the channel you want to specify more than one CAP to do would be set all the same? You can add different channel settings in Channels tab and then manually select it for each CAP. I added 3 non-overlapping channels to Channels and select som...
by kometchtech
Fri Jul 25, 2014 11:55 pm
Forum: Wireless Networking
Topic: About Wifi roaming settings in CAPsMAN
Replies: 3
Views: 7769

Re: About Wifi roaming settings in CAPsMAN

As for now you can use a bridge in datapath configuration. It will roam ok between APs'. Also you may want to setup access list for dropping low-signal clients (for them to reconnect to strongest AP). Roaming will not be seamless but at least it's working. Thank you for answer. It is that if I brid...
by kometchtech
Fri Jul 25, 2014 11:28 pm
Forum: General
Topic: simple capsman feature request..
Replies: 7
Views: 3618

Re: simple capsman feature request..

+1

I think it is a good idea.
I also agree.
by kometchtech
Fri Jul 25, 2014 11:22 pm
Forum: General
Topic: How to build a Wi-Fi roaming environment of using CAPsMAN
Replies: 11
Views: 10811

Re: How to build a Wi-Fi roaming environment of using CAPsMA

You just need to set one bridge/datapath configuration for your caps in CAPsMAN (either via provisioning or manually for each CAP) and it will just work. It's not seamless but for now it's working just fine. I have some packets lost when switching between APs', 0.5-2 seconds gap in CSipSimple (SIP ...
by kometchtech
Fri Jul 25, 2014 10:15 pm
Forum: General
Topic: Feature request for v7.x
Replies: 296
Views: 106614

Re: Feature request for v7.x

Please add ND Proxy support (RFC 4389) in v7.
It is the essential feature for ipv6 users.
+1

This function is mandatory in IPv6 environment in Japan.
by kometchtech
Fri Jul 25, 2014 10:12 pm
Forum: General
Topic: Feature request for v7.x
Replies: 296
Views: 106614

Re: Feature request for v7.x

We were also wrote below, please support IPv6 environment in Japan. I am not even able to get for a hand to the user without this. http://forum.mikrotik.com/viewtopic.php?f=1&t=87388#p438726 We understand that it's a special situation, but please realize whether. After that, I want you to also u...
by kometchtech
Fri Jul 25, 2014 10:08 pm
Forum: General
Topic: Feature request: CAPsManager - roaming
Replies: 80
Views: 39118

Re: Feature request: CAPsManager - roaming

I also please let me agree with this opinion.
I'm glad I also and will be able to build a roaming environment utilizing the capabilities of CAPsMAN.

Best regards.
by kometchtech
Fri Jul 25, 2014 6:59 pm
Forum: General
Topic: How to build a Wi-Fi roaming environment of using CAPsMAN
Replies: 11
Views: 10811

How to build a Wi-Fi roaming environment of using CAPsMAN

Hello, all I will question because there was no answer even heard in the forum. I think You can use the CAPsMAN, to be able to centrally manage the CAP, but Is it possible to build a roaming environment of Wi-Fi while using the CAPsMAN? Because I think because no apparent way to add MeshInterface in...
by kometchtech
Fri Jul 25, 2014 3:58 pm
Forum: General
Topic: 7.0?
Replies: 44
Views: 18518

Re: 7.0?

When we can expect first 7.0beta to testing?
I want to join if it is shown here that I also carried out.
by kometchtech
Fri Jul 25, 2014 2:09 pm
Forum: General
Topic: 7.0?
Replies: 44
Views: 18518

Re: 7.0?

As demand from me, I want you to support IPv6 situation in Japan. For IPv6, 2 types of IPoE system PPPoE and method are present in Japan, if you do not have my support, neither of which, it is not possible to spread the user Routerboard. With that said do not support IPv6 environment in Japan from a...
by kometchtech
Thu Jul 24, 2014 4:06 am
Forum: General
Topic: Newsletter 60: 802.11ac
Replies: 104
Views: 65329

Re: Newsletter 60: 802.11ac

Really good news! r11eac is seems based on AR9882 2*2, what about AR9880 and 3*3? I saw replies on other forums that compex ar9880 3*3 solution don't work yet with mikrotik. And it is damn expensive :( Would this card (r11eac) work with 912-series (external mini-pcie), not only with rb800/900 board...
by kometchtech
Wed Jul 23, 2014 10:43 am
Forum: General
Topic: Newsletter 60: 802.11ac
Replies: 104
Views: 65329

Re: Newsletter 60: 802.11ac

Thank you for information.
Solved one question.

Best regards.
by kometchtech
Wed Jul 23, 2014 10:15 am
Forum: General
Topic: Newsletter 60: 802.11ac
Replies: 104
Views: 65329

Re: Newsletter 60: 802.11ac

Price and time of sale to the public of R11E ac is worrisome.
This is also 2×2? Or 3×3?

Best regards
by kometchtech
Fri Jul 18, 2014 8:02 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 62918

Re: v6.16/v6.17

What´s new in routerboot 3.18 ?

I know --> support for new AC products.
But another changes?
Please update old changelog on wiki - http://wiki.mikrotik.com/wiki/RouterBOOT_changelog
Release Notes RouterBOOT Do not update?
I want to know what's changed for the time being.
by kometchtech
Fri Jul 18, 2014 7:16 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 62918

Re: v6.16/v6.17

Problem that occurred in RouterOS 6.16 have confirmed that you have solved by 6.17.
Thank you for quick response.
by kometchtech
Thu Jul 17, 2014 7:00 pm
Forum: General
Topic: Feature request: Proxy-ndp alongside proxy-arp
Replies: 3
Views: 3387

Re: Feature request: Proxy-ndp alongside proxy-arp

+1
I also agree.
by kometchtech
Sat Jun 28, 2014 10:36 am
Forum: Wireless Networking
Topic: About Wifi roaming settings in CAPsMAN
Replies: 3
Views: 7769

About Wifi roaming settings in CAPsMAN

Hello, I want you to tell me if you know someone I do not know how to set. In a CAPsMAN the current CRS, I have created an environment that is connected to three CAP, but I do not know how to set Wifi roaming in CAPsMAN control. It's thought to be or may be set to Mesh at first, but you are also usi...
by kometchtech
Sat Jun 21, 2014 6:54 am
Forum: SwOS
Topic: When set to Auto PoE, conduction expires suddenly
Replies: 0
Views: 2394

When set to Auto PoE, conduction expires suddenly

Hello, all It may be just my environment, but he can not be used with PoE power supply, the RB260GS and RB912UAG by using RB260GSP, but this is set to automatic only Port4 and Port2 for some reason, continuity off suddenly one day it encounters a phenomenon I put it away. Problem in Port3, Port5 's ...
by kometchtech
Mon Jun 09, 2014 8:34 am
Forum: General
Topic: Early ChangeCipherSpec Attack (CVE-2014-0224)
Replies: 2
Views: 1721

Early ChangeCipherSpec Attack (CVE-2014-0224)

Hello,

Problem of OpenSSL has occurred again,
but either would not affect in RouterOS in the same way as the previous Heartbleed this problem?

Best regards.
by kometchtech
Sat May 10, 2014 3:51 am
Forum: General
Topic: [issue] Function of the enable / disable of the Package does
Replies: 2
Views: 1604

Re: [issue] Function of the enable / disable of the Package

netinstall the device and try again, if the problem persist, contact support@mikrotik.com
Thank you for reply.
In fact, I even tried CCR or CRS after that, it was found that similar symptoms has occurred.

You decide to take your own contact support as it is.
by kometchtech
Fri May 09, 2014 7:59 pm
Forum: General
Topic: [issue] Function of the enable / disable of the Package does
Replies: 2
Views: 1604

[issue] Function of the enable / disable of the Package does

As a result of attempts to switch the disable and enable the Package in RB2011, I noticed that this feature is not working. The package scheduled for the disable or enable, and also perform the restart, the state of the package that should have been enable / disable did not change. current-version: ...
by kometchtech
Tue May 06, 2014 2:52 am
Forum: General
Topic: [bug][CRS226] SFP module does not normally Linkup
Replies: 8
Views: 4976

Re: [bug][CRS226] SFP module does not normally Linkup

Thing of the correspondence during the seems to know about this problem I asked to support.
By the way, sfp port 2 in the state using the SFP+ module, Are you sure you want to Linkup at 1G?
Have you ever heard that seem to say that it does not normally Linkup After a review.
by kometchtech
Fri May 02, 2014 1:40 am
Forum: General
Topic: [bug][CRS226] SFP module does not normally Linkup
Replies: 8
Views: 4976

Re: [bug][CRS226] SFP module does not normally Linkup

Symptoms that do not Linkup correctly even when using the First Port comes in.

It was also overlooked information that Second Port 10Gb Only.
by kometchtech
Thu May 01, 2014 10:25 pm
Forum: General
Topic: [bug][CRS226] SFP module does not normally Linkup
Replies: 8
Views: 4976

Re: [bug][CRS226] SFP module does not normally Linkup

Same problem here but with mikrotik modules (550m MM gigabit one). Last ROS version.
Thank you for reaction.

I have tried everything from 6.12 ROS6.9, but is struggling to be no signs of improving at all.
by kometchtech
Thu May 01, 2014 3:36 pm
Forum: General
Topic: [bug][CRS226] SFP module does not normally Linkup
Replies: 8
Views: 4976

[bug][CRS226] SFP module does not normally Linkup

Hello, everyone. Currently, he is to verify the CRS226, but if you use a 1Gb-SFP module in SFP + port, would be Linkup properly? In my environment, symptoms SFP module is not recognized properly, repeat the Linkdown and LinkUp has occurred. Further, looking at the Interface information, the value of...
by kometchtech
Wed Jan 29, 2014 7:24 pm
Forum: General
Topic: v6.8 pre-release (RC)
Replies: 44
Views: 9087

Re: v 6.8 released

RouterOS 6.8 seems to have been withdrawn,
but I would have withdrawn in problems such as not start as in the above?
by kometchtech
Fri Jan 24, 2014 1:32 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 33180

Re: What's new in 6.8rc1

It is updated at 2014-01-24 08:58:53 with, Although it is daily build,
Why date of package contents has become a thing of yesterday are you?
by kometchtech
Fri Jan 17, 2014 7:12 am
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 33180

Re: What's new in 6.8rc1

Updates 6.8rc1, which is published 2014-01-16 What?
Contents are worried about the release notes has not been updated.
by kometchtech
Tue Jan 07, 2014 8:04 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 33180

Re: What's new in 6.8rc1

you guys should re-name it to RC2 if there's a revision. I just re-downloaded it as the same file, same size, just different dates on it. I can't even tell what was changed from the Jan 2nd and the one released back in December +1... generally new releases have different version numbers. +2. Make b...
by kometchtech
Tue Dec 24, 2013 10:27 am
Forum: Wireless Networking
Topic: Question in the comparison of nv2 802.11
Replies: 2
Views: 1725

Re: Question in the comparison of nv2 802.11

Thank you. Read a little more Wiki which had you tell me, We are going to check. Best regards on an idle nv2 link fluctuation is normal. if you run the bandwidth-test one the "small" MT routers the result is unreliable, at least it's my experience. nv2 sometimes needs a bit tuning but than...
by kometchtech
Sun Dec 22, 2013 9:13 pm
Forum: Wireless Networking
Topic: Question in the comparison of nv2 802.11
Replies: 2
Views: 1725

Question in the comparison of nv2 802.11

Hi everyone. I want you to ask questions because there is that it is trying to validate the current environment below, but do not know a little. Environment: Indoor 5m [admin@MikroTik] /system resource> print uptime: 1d6h1m51s version: 6.8rc1 build-time: Dec/20/2013 13:41:42 free-memory: 43.6MiB tot...
by kometchtech
Thu Dec 12, 2013 11:12 pm
Forum: General
Topic: Feature Request: For monitoring tool module
Replies: 0
Views: 1017

Feature Request: For monitoring tool module

It's a tendency that monitoring is important in infrastructure investment in Japan, but there is a place that not enough SNMP that is implemented in the current Routerboard. As a monitoring tool, Cacti and Zabbix, nagios, and Munin is I is often used in Japan, but it is my desire to be of wanting to...
by kometchtech
Mon Dec 09, 2013 9:20 am
Forum: Beginner Basics
Topic: How to configure policy-based routing of adding a Router
Replies: 0
Views: 930

How to configure policy-based routing of adding a Router

I have used in 2WAN up the current CCR1016. You want to communicate to the router side by adding another router here, add only terminal certain. I think you can be set using the policy-based routing in this case, but I wonder Is there a way to add without breaking the current setting? Best regards. ...
by kometchtech
Mon Dec 09, 2013 7:20 am
Forum: General
Topic: 【Issue】I can not use Java Applet of iLO4 in CRS.
Replies: 0
Views: 1038

【Issue】I can not use Java Applet of iLO4 in CRS.

Hi, I am using a CRS125-24G-1S, but it afflicts the head to some problem. It's a problem that occurs when you have connected a iLO4 of hp ML110 G7 and PC, but it is a problem if you try to use the Java Applet version when using the Virtual KVM, that does not come up. This problem has been confirmed ...
by kometchtech
Sun Dec 01, 2013 12:16 pm
Forum: General
Topic: can not change the Isolation Profile: CRS
Replies: 0
Views: 2031

can not change the Isolation Profile: CRS

From the promiscuous Isolation Profile of Switch Port,
I'm would like to change in isolated, but can not be changed even from the Terminal from Winbox.

The function of this place, this wonder a bug?
Or how to use my I wonder if doing wrong?

Best regards.
by kometchtech
Sat Nov 30, 2013 2:11 am
Forum: Wireless Networking
Topic: RB912UAG-5HPnD-OUT not working!
Replies: 10
Views: 4092

Re: RB912UAG-5HPnD-OUT not working!

Hi, As you say, how to connect the cable seems to be bad. We're now eliminated this problem. Best regards I was connected as shown in the image, but the power does not enter, it did not work. In case anyone did not understand - the image is how NOT to connect the cable :-) Power to Mikrotik is suppl...
by kometchtech
Fri Nov 29, 2013 5:15 pm
Forum: General
Topic: 【Issue】 time stamp of the log is not output.
Replies: 0
Views: 789

【Issue】 time stamp of the log is not output.

It's as attached images, but in the log of Winbox, when the (00:00:00) time of just date,
there is no output of the time. This Would not be a problem as the log output?

Best regards
by kometchtech
Fri Nov 29, 2013 4:34 pm
Forum: General
Topic: Changelog RouterOS 6.7
Replies: 27
Views: 21053

Re: Changelog RouterOS 6.7

What's new in 6.7 (2013-Nov-29 13:37): *) support Android usb tethering interface; *) ipsec - added aes-gcm icv16 encryption mode; *) wireless - improve rate selection for nstreme protocol *) poe - new poe controller firmware for RB750UP and OmniTIK UPA; *) ipsec - added aes-ctr encryption mode; *) ...
by kometchtech
Fri Nov 29, 2013 8:04 am
Forum: General
Topic: 【issue】Switch menu does not appear in Webfig
Replies: 3
Views: 2502

【issue】Switch menu does not appear in Webfig

I have been using CRS125 (rOS6.7), but it appears on the menu as Switch of attached images is as if they are not displayed.
It is displayed only when you use the Winbox, Have you found a bug?

Best regards
by kometchtech
Tue Nov 26, 2013 3:43 pm
Forum: General
Topic: For instructions on how to enable jumbo frames on CRS
Replies: 2
Views: 9813

Re: For instructions on how to enable jumbo frames on CRS

Thank you. I was mistaken. I was thinking of either the specification of 9000 bytes, but in the case of CRS I'm such until 4064 bytes. Also check box of jumbo frame that's redundant, I learned for the first time. However, this check box, is not that it is disabled if you noticed? I was helpful to yo...
by kometchtech
Tue Nov 26, 2013 2:43 pm
Forum: General
Topic: Feature request: MAC address list
Replies: 15
Views: 5973

Re: Feature request: MAC address list

+1

It is desirable to be in when it is used in workplace.
Does anyone think that a mac address list would be desirable?
by kometchtech
Tue Nov 26, 2013 2:40 pm
Forum: General
Topic: For instructions on how to enable jumbo frames on CRS
Replies: 2
Views: 9813

For instructions on how to enable jumbo frames on CRS

Hi, You are using a CRS125, but you want to use jumbo frames. However, it is not possible to change the MTU setting, and how to enable jumbo frames also command as follows: look to the content. Are there ways to work on this issue? Best regards [admin@MikroTik] /interface ethernet switch port> set e...
by kometchtech
Tue Nov 26, 2013 2:35 pm
Forum: General
Topic: monitoring
Replies: 2
Views: 1195

Re: monitoring

Hi,

You may not helpful, but I have been collecting the information of the interface required by the SNMP monitoring of Zabbix.

Do you helpful?

Best regards
by kometchtech
Mon Nov 25, 2013 3:11 pm
Forum: General
Topic: Changelog RouterOS 6.7
Replies: 27
Views: 21053

Re: Changelog RouterOS 6.7

What's new in 6.7 (2013-Nov-25 10:22): *) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold; *) ipsec - added sha256 and sha512 support; *) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2; *) certificate - suppor...
by kometchtech
Fri Nov 22, 2013 10:50 am
Forum: General
Topic: Changelog RouterOS 6.7
Replies: 27
Views: 21053

Re: Changelog RouterOS 6.7

Thanks!
by kometchtech
Wed Nov 20, 2013 4:08 pm
Forum: Forwarding Protocols
Topic: OpenFlow
Replies: 3
Views: 3104

Re: OpenFlow

Hi, In this regard, among network engineers dealing with OpenFlow of Japan, I have become a problem of interest very. I hope that I will also be expanded product version soon. Best regards. Hi, I'm interested in OpenFlow features in RouterBOARD . So, I've checked the OpenFLow features . But, it seem...
by kometchtech
Wed Nov 20, 2013 10:49 am
Forum: General
Topic: Changelog RouterOS 6.7
Replies: 27
Views: 21053

Re: Changelog RouterOS 6.7

6.7rc1 version up in November 19? It seems to use, but do you know What changes?

Best regards
by kometchtech
Fri Nov 15, 2013 5:01 pm
Forum: General
Topic: CRS default configuration
Replies: 4
Views: 2089

Re: CRS default configuration

I also hope that such options can change the background and text color of the LCD, RB2011 series CRS ​​and CCR is prepared.

Best regards
by kometchtech
Thu Nov 14, 2013 4:21 am
Forum: General
Topic: Userman optimized for multi-core
Replies: 4
Views: 2598

Re: Userman optimized for multi-core

There is no such data can provide, but the bias of the Core often occurs in the following equipment to own me.
This Will a matter of rOS?

CCR1016-12G
by kometchtech
Mon Oct 14, 2013 5:18 pm
Forum: General
Topic: [Request] radio frequency to the corresponding country_set
Replies: 0
Views: 1251

[Request] radio frequency to the corresponding country_set

I have used the following equipment, it is impossible to be selected in japan country set, select the desired frequency. It has the following in Japan. ch / MHz 36/5180 40/5200 44/5220 48/5240 52/5260 56/5280 60/5300 64/5320 100/5500 104/5520 108/5540 112/5560 116/5580 120/5600 124/5620 128/5640 132...
by kometchtech
Fri Oct 11, 2013 1:48 pm
Forum: General
Topic: Is it possible to change the black background of the LCD?
Replies: 0
Views: 768

Is it possible to change the black background of the LCD?

I have been using CCR1016 now, but I want to change the black background of the LCD in feeling like the following, but I wonder possible? When it is black as RB2011, although he survive it very easy to see it is not too bright. https://twitter.com/mymikrotik/status/251865862322130944/photo/1 Best re...
by kometchtech
Thu Oct 10, 2013 9:16 pm
Forum: General
Topic: changelog ROS 6.5
Replies: 32
Views: 18578

Re: changelog ROS 6.5

Works import certificates? RouterOS 6.5 (2013-Oct-10 09:28) RB433UAH > action timed out - try again, if error continues contact MikroTik support and send a supout file (13) I have not used. Where you tried to use the file dated 10 October, problems such as had come out in the file 4 October the tim...
by kometchtech
Wed Oct 09, 2013 3:15 pm
Forum: General
Topic: changelog ROS 6.5
Replies: 32
Views: 18578

Re: changelog ROS 6.5

We applied the ROS6.5 for me, it was confirmed that phenomenon will not be able to connect with Winbox and Webfig. However, I can connect with Mac Telnet or ssh. Moreover, there is a good connection routing, etc. in this state. This unofficial? I wonder because ROS such? Is there someone who has sym...
by kometchtech
Sun Oct 06, 2013 9:00 pm
Forum: Wireless Networking
Topic: Throughput does not come out.
Replies: 2
Views: 2152

Re: Throughput does not come out.

Yes, cables are you using Cat5E is I'm sure.
Are the 951 and 912 connected by cable?
The same for the RB2011 and the SXT?


I assume yes, but just to be sure.
by kometchtech
Sun Oct 06, 2013 6:43 pm
Forum: Wireless Networking
Topic: Throughput does not come out.
Replies: 2
Views: 2152

Throughput does not come out.

Currently, we are developing a Wireless LAN environment configuration such as the following in my environment, but worried that the throughput does not come out when you transfer large files. Or normally wonder the extent this? Can you tell me if there is a place that can be tuned? ROS 6.4 [NAS] ---...
by kometchtech
Fri Oct 04, 2013 5:20 am
Forum: General
Topic: [problem] value of snmp is different
Replies: 3
Views: 1392

Re: [problem] value of snmp is different

When I check the item of Health of WinBox, I have noticed that the display is not correct. I hope fixed in the next version of So. Yes, I am aware of it. However, because I have applied to RB multiple templates in Zabbix, this shift is a little problem. It is a small problem, but I hope to fix. no, ...
by kometchtech
Tue Oct 01, 2013 4:47 pm
Forum: General
Topic: [problem] value of snmp is different
Replies: 3
Views: 1392

Re: [problem] value of snmp is different

Yes, I am aware of it.
However, because I have applied to RB multiple templates in Zabbix, this shift is a little problem.
It is a small problem, but I hope to fix.
no, it is not ok, however for workaround you can divide the value by 100 and get the real value.
by kometchtech
Mon Sep 30, 2013 7:14 pm
Forum: General
Topic: [problem] value of snmp is different
Replies: 3
Views: 1392

[problem] value of snmp is different

I have a RB SXT G-5HPnD r2 and RB2011UAS-2HnD, but if the value of Voltage, to get in snmpwalk, is acquired in a state where the number of digits is different. This wonder of behavior as intended? ROS 6.4 RB2011UAS-2HnD # Snmpwalk-v 2c -c public 192.168.1.102 .1.3.6.1.4.1.14988.1.1.3.8.0 SNMPv2-SMI ...
by kometchtech
Thu Sep 19, 2013 5:34 am
Forum: General
Topic: For CPU utilization of idle
Replies: 3
Views: 1755

[Issue] Re: For CPU utilization of idle

hello As I told, showed that to disabled LCD, another problem occurred at all this time. It can no longer have any connection with Webfig and winBox. However, communication itself is made of. Where somehow, so was able to connect with Mac Telnet, were returned to enabled LCD, you can now connect and...
by kometchtech
Thu Sep 19, 2013 4:38 am
Forum: General
Topic: For CPU utilization of idle
Replies: 3
Views: 1755

Re: For CPU utilization of idle

Hello

Thank you for information!
Are you sure you want recognizable drawing of the LCD that is under load?
Would it be backlight that any state of OFF?

Take a look at the state and then to disabled for the time being.

Best regards
Disable the LCD from the /lcd menu.
by kometchtech
Tue Sep 17, 2013 4:15 pm
Forum: General
Topic: For CPU utilization of idle
Replies: 3
Views: 1755

For CPU utilization of idle

I have used the equipment in the following environments, but may be worried about a little. Environment: ROS 6.4 on RB2011UAS When operating at 600MHz rated the CPU, used average of 5%, but this wonder normal? By the way, it is a state that config is not set almost. By to 650MHz by overclocking the ...
by kometchtech
Wed Sep 11, 2013 10:00 am
Forum: General
Topic: How can I buy a CRS125-24G?
Replies: 4
Views: 1847

Re: How can I buy a CRS125-24G?

I hope that I too will be sold out early.
If possible, do not tell just when you plan to sell?
by kometchtech
Wed Sep 11, 2013 7:09 am
Forum: Wireless Networking
Topic: RB912UAG-5HPnD-OUT not working!
Replies: 10
Views: 4092

Re: RB912UAG-5HPnD-OUT not working!

I've tried the cable of category 5e something of this, but none was also no good. That'll sure do it :lol: Also be sure when testing that your Ethernet cable has all 8 wires connected (look at RJ45). Some inexpensive cables (shipped with cheap soho 10/100 routers for example) only have 4 wires so wi...
by kometchtech
Wed Sep 11, 2013 1:05 am
Forum: Wireless Networking
Topic: RB912UAG-5HPnD-OUT not working!
Replies: 10
Views: 4092

Re: RB912UAG-5HPnD-OUT not working!

I was connected as shown in the image, but the power does not enter, it did not work.
by kometchtech
Tue Sep 10, 2013 2:03 pm
Forum: Wireless Networking
Topic: RB912UAG-5HPnD-OUT not working!
Replies: 10
Views: 4092

Re: RB912UAG-5HPnD-OUT not working!

hi, normis The description of how to connect, thank you. As long as you see this, I was mistaken about the connection method. However, you are in that you have to exchange correspondence as the RMA dealer. So you no doubt next time. I would like to thank the appropriate advice. Best regards Did you ...
by kometchtech
Mon Sep 09, 2013 9:19 pm
Forum: Wireless Networking
Topic: RB912UAG-5HPnD-OUT not working!
Replies: 10
Views: 4092

Re: RB912UAG-5HPnD-OUT not working!

Hi there
Thanks for the information.

I try to connect to Eth1, but the situation did not improve.
So, I decided to RMA negotiating with dealers.

Best regards
It should be connected to the Eth 1 (or LAN1). If nothing happens (no LED goes on etc...) return for a RMA to the supplier.
by kometchtech
Sun Sep 08, 2013 6:55 pm
Forum: Wireless Networking
Topic: RB912UAG-5HPnD-OUT not working!
Replies: 10
Views: 4092

RB912UAG-5HPnD-OUT not working!

I bought the RB912UAG-5HPnD-OUT, ​​but it is a situation that does not work well. In the form you are using PoE Injector the RB912UAG-5HPnD-OUT, you connect the AC power, it is connected to a PoE Port of RB951G-2HnD, but the power LED RB912UAG-5HPnD-OUT does not light. Is this a failure? The power L...
by kometchtech
Mon Aug 26, 2013 6:25 pm
Forum: General
Topic: RB2011 Switch 1 Type -> Unknown
Replies: 4
Views: 2727

Re: RB2011 Switch 1 Type -> Unknown

It appears to have been fixed in routeros-mipsbe-6.3rc1.
by kometchtech
Mon Jul 22, 2013 8:15 pm
Forum: General
Topic: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011
Replies: 18
Views: 7324

Re: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011

Hi, janisk

I understand that it's a display issue.
We are going to wait until it is fixed.

Best regards. :D
by kometchtech
Mon Jul 22, 2013 2:28 pm
Forum: General
Topic: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011
Replies: 18
Views: 7324

Re: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011

Hi, janisk

I did remain of, "unknown", but I tried to apply to the machine.
I attach the rif file and screen shot just in case.

Best regards.
by kometchtech
Mon Jul 22, 2013 11:54 am
Forum: General
Topic: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011
Replies: 18
Views: 7324

Re: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011

Hi, janisk

Thank you for information.
I'll try now.

Best regards
by kometchtech
Mon Jul 22, 2013 11:48 am
Forum: General
Topic: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011
Replies: 18
Views: 7324

Re: 6.2 Bug - Switch Type "Unknown" for Switch 1 on RB2011

Hi, janisk

I know about what's been fixed in the latest build.
By the way, where is the file?

Best regards
by kometchtech
Sun Jun 16, 2013 2:47 am
Forum: General
Topic: [Resolved]:Not Connected IPsec/L2TP for Windows 8
Replies: 1
Views: 1158

[Resolved]: Not Connected IPsec/L2TP for Windows 8

Hello MikroTik team

After the recovery of the PC, is now possible to IPsec/L2TP connect without issue.
Is my understanding that this is wrong "WAN Mini port(IP)".

I apologize that it was not a problem and CCR.

Best regards.
by kometchtech
Sat Jun 15, 2013 4:54 am
Forum: General
Topic: [Resolved]:Not Connected IPsec/L2TP for Windows 8
Replies: 1
Views: 1158

[Resolved]:Not Connected IPsec/L2TP for Windows 8

Hello MikroTik team I am using a IPsec/L2TP, but I can no longer connect from Windows8. Error code 720 You can be connected without any problems from Windows7. For this problem, Does anyone know the solution? Best regards. [admin@MikroTik] /system routerboard> print routerboard: yes model: CCR1016-1...