MikroTik

molesza

I know this is an old thread but some may find this link useful for polling mikrotik router with SNMP to netdata:

https://www.who-els.co.za/2019/06/netda ... rotik.html

molesza

I have a great setup at the moment with PCQ where all bandwidth is shared equally from my 10M/10M connection. All is lovely. I have scoured the internet trying to find a solution to what I would like to achieve. I am happy for bandwidth to be split equally across all devices needing access to the in...

molesza

I've managed to solve this myself. Here is how I did it: 1) Reset the configuartion with no default configuration 2) Create VLAN on interface ether1 3) Bridge VLAN, all ether ports and wlan, BUT NOT ETHER 1 4) Enable DHCP client on ether1 if you would like to have a management IP to get access. 5) C...

molesza

I am most probably doing the wrong things here. Basically I want the router in the flat to be a wireless access point. The main mikrotik must hand out DHCP and do all the routing. The only thing I want the second mikrotik to do is to tag the packets with VLAN ID 50 so that each client on the second ...

molesza

I have two flats in my house that I provide internet too. I have recently started using Vlans to seperate and manage the traffic. I have a wireless access point that can tag packets with a VLAN ID and have successfully got the internet connected mikrotik to hand out DHCP to that flat. The second fla...

molesza

Is it possible now?

molesza

You don't need scripts - just use the limit-at feature and priorities to give priority to the Roku. limit-at is a misleading name - it's really a "minimum guaranteed bandwidth" So set limit-at = 256k down / 128k up on the other queues, and set it to something like 75% of your total bandwi...

molesza

I have limited bandwidth and have problems with streaming on my home network. All my devices have simple queues and I would like to do the following. My roku sits idle until I start streaming. My thought is to have a script that looks for data throughput from the Internet. As soon as the roku hits 2...

molesza

Thanks a lot for the explanation. These little mikrotiks are pretty impressive. So do I need to tell the wireless devices how to handle the tags or will it pass this information freely to the second mikrotik?

molesza

Thanks for the reply. I think I understand what to do on the mikrotiks and will try so tonight. Could you please explain in english what is actually happening to make it work? Is the VLAN now a seperate connection bridging the main mikrotik? Allowing PPPoE packets to flow freely bypassing the mikrot...

molesza

So I have a little bit of an interesting setup. I have a Mikrotik (192.168.1.1) dialing up to a PPPoE account over a bridge netgear modem. This works just fine and provide internet to my house perfectly. I have a flat at the end of my garden that I used to share internet directly through a wireless ...

molesza

Hi I have been troubleshooting a problem with the mikrotik and power cuts. When the power comes back up the mikrotik and the dsl modem boot at the same time obviously. However, when they boot at the same time the mikrotik comes online and shows the two pppoe connection I have connected. Stangely, th...

molesza

I have not been able to get it to work. Traffic only gets split equally. I would still love to be able to get it to work. Hopefully someone with a bit of knowledge will see this and let us know.

molesza

I have looked at that and spent hours trying to make it work. I failed. How do I specify subnets over single ip?

Also when I tried to do this with two IP addresses with different priorities it ended up splitting the traffic equally

molesza

Hi I have the following setup ether1 - connection to wan (bridged modem using pppoe dialup on mikrotik router) ether2 - 192.168.2.0 ether3 - 192.168.3.0 I would like to have my internet traffic prioritized in such a way that the subnet 192.168.3.0 has full access to my 4 meg/ 512k internet connectio...

molesza

Am I to believe that this is not possible?? I was able to do traffic shaping like this on a pfsense installation so I have to be believe it is possible on a mikrotik!

molesza

I cant find anything that will saturate the traffic using the static IP's I then tried setting up a simple queue with the 10 ip addresses listed and with a limit of 4 meg down 512k up and then adding another simple queue restricting ether4 to 512k down and 128k up. It just seems to halve the traffic...

molesza

Hi all Basically I have a network that is under a bit of strain. It's only a 4 meg line. I need to give priority to all traffic sent and received by 10 IP addresses. These are static IP's 192.168.1.40 - 192.168.1.49. All other devices are connected with DHCP. So if the static IP's need internet they...

molesza

Is this not something that can be done with simple queues?

molesza

I have a 4mb down and 512k up connection and am trying to prioritize traffic. I have a PC 192.168.2.52 that downloads all day long. My PC that I use for browsing is 192.168.2.51 I want the Downloading PC to have full use of the bandwidth available. If My PC for browsing gets used then it must have f...

molesza

Anybody have any idea how to do this?

molesza

Thanks for your reply. The pppoe IP will change every time a connection is made as we don't have static IP from isp but the ether 5 IP will always be 192.168.1.21

If it needs to happen I can get a static public IP but I don't really want to as it costs extra

molesza

Hi

Have a look at this thread : http://forum.mikrotik.com/viewtopic.php?f=13&t=85853
Where I documented my process.

Hope it helps

molesza

I have a working setup where if my standard PPPoE fails then it falls over to port 5 which is a DHCP gateway. Can someone please take a look at my script and let me know what changes to make so that it load balances both gateways for all devices and fails over to the either if one connection goes do...

molesza

I have two gateways. Primary is PPPOE bridged Secondary is DHCP assigned Failover is working perfectly but because mikrotik is so seemless at handling this the connection could be down for weeks and I wouldnt know. How can I tell the mikrotik to email me when the primary connection is down. Also ema...

molesza

Nevermind.....

if you unplug the telephone line it does work. It just takes a few minutes.

molesza

I have failover setup 1st Gateway is PPPOE over bridged modem. 2nd Gateway is DHCP assigned Unplugging the power from the modem causes the failover to trigger to the second gateway and works as expected. When I plug the modem back in the mikrotik uses the primary gateway. If I remove the phone line ...

molesza

I am troubleshooting this myself and documenting here for future reference and to possibly help others. It was defaulting to the second network because I did not set the default distance in "> IP > DHCP CLIENT" on interface 5 which is connected to the second network. I changed that to 2 an...

molesza

I had a look at http://wiki.mikrotik.com/wiki/Two_gateways_failover Which suggests adding these lines /ip route add gateway=192.168.1.1 check-gateway=ping /ip route add gateway=192.168.2.1 distance=2 I ammended it slightly by changing the gateway to the interface name. Set the second network to a di...

molesza

Are you running 5.9? I had terrible performance between subnets with 5.9. Upgrade to the latest firmware.

molesza

Hi all I have two subnets on my mikrotik. 192.168.2.0 is connected PPPOE bridge to my adsl modem. 192.168.1.0 is connected to ethernet 5 and is another network. I can access everything on that subnet and its working great. 192.168.1.0 has DHCP and a gateway to the internet on 192.168.1.1 I would lik...

molesza

Hi

Thanks!!! I have got it working now! It turned out to be firmware 6.9 on the other subnet. Have upgraded and it worked straight away.

I really appreciate your help! I have been going mad trying to get this to work.

molesza

Thank you very much for your replies. I have done every step you mention but still cant ping. I have connected directly to the other subnet so i could get the config from the mikrotik on 192.168.1.0 Here is mikrotik of 192.168.1.0 # may/27/2014 20:47:51 by RouterOS 6.9 # software id = VZXF-BS2S # /i...

molesza

Hi My mikrotik has an address of 192.168.2.1 and hands out DHCP over ports 2 - 4. On port 5 I have an address of 192.168.1.21 which is connected to another subnet 192.168.1.0 I am able to ping each and every host on 192.168.1.0 through winbox on the mikrotik. I CANT ping any of the hosts on the 192....

molesza

Thanks for the advice. I have made some rules and marked packets coming from a particular machine in 192.168.2.52 to a particular Public IP. The packets get marked and fed into queues but the traffic just seems to be shared equally. Not the desired result of the 192.168.2.52 machine dropping right o...

molesza

I have a 4 meg down 512k upload and want to give port 563 full access to download when nothing else is using the internet. If the internet is being used port 563 must get the lowest priority. I have googled and looked through the forums but everything I have tried does not seem to work on router os ...

molesza

Working perfectly! Thank you so much for your help. Brilliant little device this!

molesza

I have removed the duplicates. Not sure how that happened. 192.168.2.52 is a file server. I would like to add the routes to 192.168.1.1 gateway. That gateway is also a mikrotik router. How would I add those routes so that all pc's on 192.168.1.0/24 can access it? Would I also need to add routes from...

molesza

I have two WAN interfaces and one LAN interface. A PC on the LAN interface needs to be accessible from PC's on the WAN. This network on the WAN interface is a complete network of PC's and not just an internet connection. The IP that needs to be accessible is 192.168.2.52 and must be accessible from ...

molesza

I have PPC load balancing setup on my mikrotik with 2 DSL modems. One of the client PC's 192.168.2.52 needs to go over connection "ISP1" I am attaching my export below and hope that someone can help me out. # mar/13/2014 18:07:59 by RouterOS 6.9 # software id = 8I1D-X0J9 # /interface bridg...

molesza

Starting to think with the lack of replies that this may not be possible.

Hope I did not offend by not using your script. I tried to use and troubleshoot the the issues I was having and realised I did not really understand the script. That is why I started from scratch.

molesza

I decided after looking at your script that I was not going to learn anything just copying and pasting. So I reset my router with no default config and setup a working load balancing mikrotik setup. Ether1 - Wan1 Ether2 - Wan2 Ether3 - Lan Wlan - Bridged with Lan Took me a while but I learnt a lot i...

molesza

Thanks for taking the time to create the script.

I reset my mikrotik and told it to restore your script on next boot.
I plugged everything into the correct ports but it is not connecting to the internet on either wan or giving me ip's on local lan. Not sure what to do now?

molesza

Thanks. I appreciate your help. I have attached the export file.

edit : removed because of sensitive information

molesza

Without trying to sound disrespectful, all you have done is explained my answer in English. I could do the same. I need someone to explain it in mikrotik. You have answered my question perfectly with everything required without helping me through the language of mikrotik. I thank you for your reply ...

molesza

The scenario is as follows. A mikrotik with DHCP server 192.168.0.1 in one building. A mikrotik without DHCP on 192.168.0.21 in another building with multiple PC's connected to it. All the PC's connected to 192.168.1.21 get there ip address from 192.168.1.1. So effectively its one big network on the...

molesza

I have a PCQ qos setup going that equally shares available bandwidth. This seems to be working well. I would like to have the current QOS setup but would like to limit a set IP 192.168.1.52 to have very low priority. Basically it must be able to use the full bandwidth of 4meg when no other machines ...

molesza

Ok. Found the problem. DHCP server was still set to hand out the default ip address of 192.168.88.1 even after changing the quick set up options.

Is there a reason why it doesn't change this?

molesza

Ok. First thing I will check when I get home. Thanks

molesza

Thanks for your reply. I am not sure what dns server they are getting at the moment. Not at home. I do know that allow remote requests is enabled. I have also seen the primary and secondary dns addresses from isp in the DNS settings. Will have a play when I get home and report back.

molesza

I have just received an rb750 that I updated to 6.9. After the upgrade I went through the quick setup. I set up to dial through my adsl modem pppoe. It connects just fine but I can't browse any websites. The rb750 is not resolving DNS. I can ping Internet ip addresses but not host names. I added the...

molesza

I have a private wireless network that connects a few buildings on my property . This is all controlled by a pfsense box in one building. All devices on network get ip addresses from that pfsense box and all share the same subnet. I also have a dsl connection on a mikrotik rb750 connected to a dsl m...

molesza

Hi all. I have 2 DSL connections on a wireless network. One DSL modem in one building and another in a separate building. Everything is connected to the same network subnet. Both modems have static ip addresses and have dhcp disabled. Clients pcs are setup using using static ip addresses. What I wou...

molesza

I have been searching for a solution all day and hope that somebody can help. I have an unraid server (file server) that I would like to have switch on whenever a client access a samba share. So my thinking is to have mikrotik listen for any requests to a specified IP address and samba port (445?) ....

molesza

Thanks! Will read up and see how I go.

molesza

Thanks. Can this be done on the RB751G and where do I find the info?

molesza

Is it possible to assign specific mac addresses to a certain vlan? Basically I want all new clients who do not have a specified mac address to default to one vlan. Then I want to set up rules where if the mac address is known it is assigned to a different Vlan. It is not possible to do this with dif...

Search found 57 matches