Hi, I've 1Gbps local network and will be set on 10Gbps. And set MTU to 8000 on each local interfaces as jumboframe to get down overhead of CCR cores with get increase of data rates. Now, I think of MTU for 10Gbps local network but I've an idea more than this. If WAN network(ISP) have more 1Gbps or m...

If you really need those features at the moment. Run openwrt image in metarouter and run ovpn from there with full feature set.

A-HA!

Thank for bringing up a thread more than a year old.

The answer was clear - We will not make new OpenVPN features.

Noooooooooo.....

I hope, DOH(DNS Over Https) supported on Mikrotiks soon.
And hope also following URL can help you.
https://dnsprivacy.org

It need update except Netflix service ip address.
Today I checked Netflix have more IPs.
How can I collect the Netflix service IPs using Mikrotik?
This is really uncomfortable to watch Netflix with using VPN.

Hello, I've 3 CCR and one of them is working that is CCR1036-12G-4S. And I've five of Cisco SIP phone it needs TFTP Server so I tried to setting up the TFTP server on CCR. But I tried several times modified TFTP settings but it can not working. I just tried setting up as following; Put in the files ...

Hi, I have CCR-1009-8G-1S THAT makes fan noise so much in the home. So I tried to change the fans as silmilar with original fans but it didn't worked. Also, I tried to attached rubber gasket to the fans but the noise didn't reduced. If you have the solution to reduce fan noise, please let me know it...

Hi, There are several ways to reduce latency between China and US for network service. 1.Using CDN as like Google Cloud CDN. It will be additional charged. 2.If you are ISP, you can control PE router using by SDN. unfortunately, I'm not ISP. 3.Using VPN that would be low latency between two country....

Many people ask for this same solution as you have - it's very bad network design. The way to do it (don't do it, though) is to configure DHCP at both routers, use bridge filters to block DHCP (udp ports 67-68) on the tunnel interface, and configure your two servers with pools of addresses that do ...

Hi I configured EoIP between two routers. One of router located Asia it called Router A and other one located US it called Router B. And main router is Router A and they have same private networks as like 192.168.0.0/24. So they are connected well but I want configure Router B to be using own Router...

Hi, I have some question about when I configure one of subnet it was combined two routers network as one of 192.168.0.1/24, How can I configure for use each router gateway when each clients connect external network except internal subnet network? For example, I have two sites. Site A and Site B, and...

Have you checked the processor load during transfer on both ends? In my case (EoIP via PPTP tunel between RB450G and RB750GL on the network with 30/3 bandwidth on the narrow side) I am able to obtain full bandwidth (30MBit) but under almost 100% processor load on Mikrotik. If I remove EoIP and just...

‬EoIPTest.png Hi I tested bandwidth EoIP between two routers using Bandwidth test tool. And then I knows bandwidth is vey poor what I guess. I have two ISP service, one is cable modem and this bandwidth 110/15 Mpbs, and other one is fiber and this bandwidth is 1/1 Gbps. And I tested speed test at h...

Hi I have a question that is different between two TILE CPUs TLR4-00980CG-10CE http://www.meganovo.cn/uploadfile/web/product/tilera/processor/TILE-Gx8009_PB036-02.pdf TLR4-00980CG-10CE-A3a http://www.tilera.com/files/drim__TILE-Gx8009_PB036-02_WEB_7663.pdf I read upper Tile CPU specification and I c...

I've heard about VPLS performance better than EoIP.
Is this still have same issue on current version?

Hi, I have a question if I want to make VPLS between two routers on internet, is it must to be connect VPN(it can be EoIP) so it can transmit/receive ethernet data each other? If it is right, VPLS/MPLS purpose is just for the centralized of network system? I've heard about if have many routers can c...

Hi Cloud DDNS is very welcome to me. But how can I configure to connect SSTP VPN? this following guide was not for me. http://wiki.mikrotik.com/wiki/Manual:Interface/SSTP#Site-to-Site_SSTP their are requires two static IP but I'm just have two dynamic IPs. Hope you let me know the instruction for co...

Hi dude :D I wanna ask you can I VPLS set up between RouterOSes it had dynamic IPs using DDNS. I can't find it any documentation of this situation. I know it is for static IP but I want to try this configuration. Please let me know some script that I can configurate as reference. I will waiting your...

Hi Dude,

I've two cloud routers CCR-1036-8G-2S+ and CCR-1036-12G-4S.
And I want to configure VPLS between two routers.
But two network is different as one IP is static and other one IP is dynamic.
So that if it possible to configure, can you make the script to implement my CCRs?
Thanks

David Hur

Scott,
Can you let me know the commends to setup between static IP and dynamic IP routers?
David

Hi,
Can I configure VPLS between two routers when it have one static IP and other one is dynamic IP?
If it possible, please let me know the command script so that I can following as a defaults.
Because I'm not well known VPLS settings.
Thank you.
David.

I've been heard that the squid3 was already included ZPH feature so that no more needed ZPH configuration for external proxy server.
If you have below than squid version 3, you'd better upgrade to squid3

Can VRRP setting and runnning on different versions of routerOS?

David Ho

Hi all of Mikrotik users. I just started performance test using Mikrotik routerOS v6.1 on VMWARE ESXi server v5. As the performance result that I think is not better than other general small and chip routers. I know if RouterOS working with RB getting good performance so that I tried to test it on v...

Hi all

Can I setting VRRP as two routerOSes it each have a demo license?

DavidHo
Regards,