Community discussions

Search found 37 matches

by Mike33
Wed Mar 06, 2019 8:50 am
Forum: RouterBOARD hardware
Topic: Does an RB4011iGS+RM support a S-RJ01?
Replies: 8
Views: 839

Re: Does an RB4011iGS+RM support a S-RJ01?

Thank!
Now everything is clear.
by Mike33
Sun Mar 03, 2019 10:28 am
Forum: RouterBOARD hardware
Topic: Does an RB4011iGS+RM support a S-RJ01?
Replies: 8
Views: 839

Does an RB4011iGS+RM support a S-RJ01?

subj
by Mike33
Wed Jul 25, 2018 7:53 pm
Forum: Wireless Networking
Topic: "banned" - what does it mean?
Replies: 2
Views: 661

Re: "banned" - what does it mean?

Looks like your mac access is not listed in the wlan acl
18:55:30 wireless,debug wlan1: XX:XX:XX:XX:5E:D7 in local ACL, accept
by Mike33
Mon Jul 23, 2018 7:12 pm
Forum: Wireless Networking
Topic: "banned" - what does it mean?
Replies: 2
Views: 661

"banned" - what does it mean?

Why devices can not connect to wAP 2nD r2? 18:55:30 wireless,debug wlan1: XX:XX:XX:XX:5E:D7 attempts to associate 18:55:30 wireless,debug wlan1: XX:XX:XX:XX:5E:D7 in local ACL, accept 18:55:30 wireless,info XX:XX:XX:XX:5E:D7@wlan1: connected, signal strength -60 18:55:32 wireless,info XX:XX:XX:XX:5E...
by Mike33
Wed Dec 09, 2015 12:16 am
Forum: General
Topic: It is impossible to remove all entries
Replies: 4
Views: 516

Re: It is impossible to remove all entries

/ip route remove [find where static]
duh
Thank you!
by Mike33
Sun Dec 06, 2015 8:32 pm
Forum: General
Topic: It is impossible to remove all entries
Replies: 4
Views: 516

Re: It is impossible to remove all entries

Yeah, in some menus, the defaults can't be removed.
Just remove everything except said item, filtered through the "find", i.e.:
/ip ipsec proposal remove [find where name!=default]
And how to remove all static routes??
by Mike33
Sun Dec 06, 2015 2:12 pm
Forum: General
Topic: It is impossible to remove all entries
Replies: 4
Views: 516

It is impossible to remove all entries

Command
/ip ipsec proposal> remove [find]
Gives out:
failure: cannot remove default phase2 configuration
by Mike33
Thu Dec 03, 2015 8:34 am
Forum: General
Topic: How to create site-to-many-site IPsec-VPN between several hEX?
Replies: 6
Views: 950

Re: How to create site-to-many-site IPsec-VPN between several hEX?

This is the guide how to set up site-to-site IpSec VPN - http://wiki.mikrotik.com/wiki/Manual:IP ... Sec_Tunnel.
But there are no guides on how to set up site-to-many-site IpSec VPN.
by Mike33
Wed Dec 02, 2015 4:39 am
Forum: General
Topic: How to create site-to-many-site IPsec-VPN between several hEX?
Replies: 6
Views: 950

How to create site-to-many-site IPsec-VPN between several hEX?

How to create site-to-many-site IPsec-VPN between several hEX?
by Mike33
Mon Nov 30, 2015 2:10 am
Forum: Beginner Basics
Topic: Changing MSS in VPN
Replies: 2
Views: 1285

Re: Changing MSS in VPN

http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Mangle#Change_MSS Thank you! This is the scheme of my network: network_scheme.jpg Therefore such rules will be necessary for me? VPN-client: /ip firewall mangle add \ out-interface=l2tp-out-vpn \ protocol=tcp tcp-flags=syn action=change-mss new-mss=1...
by Mike33
Sat Nov 28, 2015 3:09 am
Forum: Beginner Basics
Topic: Encryption in L2TP
Replies: 0
Views: 304

Encryption in L2TP

http://wiki.mikrotik.com/wiki/Manual:PPP_AAA#Properties
How parameter "use-encryption=yes" differs from use of L2TP/IpSec?
by Mike33
Sat Nov 28, 2015 2:47 am
Forum: Beginner Basics
Topic: Changing MSS in VPN
Replies: 2
Views: 1285

Changing MSS in VPN

In this article it is told:
If there are more that 10 simultaneous PPP connections planned, it is recommended to turn the change-mss property off, and use one general MSS changing rule in mangle table instead, to reduce CPU utilization.
Could you give examples of how this can be done?
by Mike33
Mon Nov 09, 2015 9:50 am
Forum: General
Topic: hEX vs hEX lite
Replies: 1
Views: 485

hEX vs hEX lite

hEX - 720 MHz
hEX lite - 850 MHz

Why performance of the hEX lite is twice less than performance of the hEX?
by Mike33
Mon Nov 02, 2015 9:58 am
Forum: General
Topic: Выбор роутеров для VPN
Replies: 6
Views: 1054

Re: Выбор роутеров для VPN

100mbit total wan throughput or 100mbit x5 = 500mbit throughput of encrypted vpn performance??
100mbit x5 = 500mbit
For encrypted IPsec at such speed, any of our accelerated devices. RB850Gx2 or CCR series
please give links to specific models of inexpensive routers
by Mike33
Mon Nov 02, 2015 9:29 am
Forum: General
Topic: Выбор роутеров для VPN
Replies: 6
Views: 1054

Re: Выбор роутеров для VPN

100mbit total wan throughput or 100mbit x5 = 500mbit throughput of encrypted vpn performance??
100mbit x5 = 500mbit
by Mike33
Mon Nov 02, 2015 9:00 am
Forum: General
Topic: Выбор роутеров для VPN
Replies: 6
Views: 1054

Выбор роутеров для VPN

Подскажите какие варианты роутеров будут адекватны для построения VPN-сети на 5 клиентов (скорость каналов 100 МБит)?
И какой тип VPN лучше выбрать?
by Mike33
Sat Jul 04, 2015 8:42 am
Forum: General
Topic: RB951G-2HnD - диаграмма направленности встроенных антенн
Replies: 3
Views: 1862

Re: RB951G-2HnD - диаграмма направленности встроенных антенн

It was answered not too long ago: it is hemisphere "above" router which is placed horizontally. Полушарие выше роутерa помещеннoгo горизонтально Спасибо! Подсажите пожалуйста, у этого роутера есть две антенны, которые расположены перпендикулярно друг к другу. Такая диаграмма направленности у обоих ...
by Mike33
Fri Jul 03, 2015 10:32 pm
Forum: General
Topic: RB951G-2HnD - диаграмма направленности встроенных антенн
Replies: 3
Views: 1862

RB951G-2HnD - диаграмма направленности встроенных антенн

Подскажите, какая диаграмма направленности встроенных антенн роутера RB951G-2HnD??
by Mike33
Wed May 20, 2015 6:44 pm
Forum: General
Topic: Проблема даунгрейда Groove A-52HPn
Replies: 3
Views: 1833

Re: Проблема даунгрейда Groove A-52HPn

Дело в том, что существует проблема в работе модуля wi-fi с оборудованием фирмы CipherLab. Я уже обращался в прошлый раз в службу поддержки с таким сообщением: Настраиваю Groove A-52HPn для работы терминалов сбора данных CipherLab 8370 (http://www.scancode.ru/catalog/item/4/36/). Возникла следующая ...
by Mike33
Wed May 20, 2015 12:52 pm
Forum: General
Topic: Проблема даунгрейда Groove A-52HPn
Replies: 3
Views: 1833

Проблема даунгрейда Groove A-52HPn

У нас есть новый роутер Groove A-52HPn. На нем стояла прошивка 6.18. Нам было необходимо установить прошивку 6.1 Я запустил WinBox, перенес все npk-файлы прошивки 6.1 в раздел «Files». Потом выполнил команду «/sys reboot» После перезагрузки я обнаружил, что прошивка 6.1 так и не установилась. Тогда ...
by Mike33
Fri Dec 20, 2013 11:52 am
Forum: General
Topic: Groove 52HPn -> Groove A-52HPn
Replies: 4
Views: 818

Re: Groove 52HPn -> Groove A-52HPn

Apart from the Access Point functionality, the A model also has twice the RAM amount (128MB)
Less memory quantity can affect the operation of the device, if we need access point with firewall only ??
by Mike33
Fri Dec 20, 2013 11:33 am
Forum: General
Topic: Groove 52HPn -> Groove A-52HPn
Replies: 4
Views: 818

Re: Groove 52HPn -> Groove A-52HPn

You could purchase a Level4 AP license, but the price is 45$. It would be more efficient to use this device elsewhere, and purchase the correct "A" model.
Thank you!

These two models have identical hardware?
by Mike33
Fri Dec 20, 2013 11:01 am
Forum: General
Topic: Groove 52HPn -> Groove A-52HPn
Replies: 4
Views: 818

Groove 52HPn -> Groove A-52HPn

We by mistake instead of Groove A-52HPn bought Groove 52HPn.
Groove 52HPn is a client device, and we need an access point.

Whether it is possible somehow to remake Groove 52HPn in Groove A-52HPn?
by Mike33
Wed Sep 18, 2013 9:24 am
Forum: General
Topic: Как удалить статические маршруты?
Replies: 2
Views: 3249

Re: Как удалить статические маршруты?

/ip route remove [/ip route find static]
Спасибо!
by Mike33
Wed Sep 18, 2013 7:30 am
Forum: General
Topic: Как удалить статические маршруты?
Replies: 2
Views: 3249

Как удалить статические маршруты?

Пробую делать так:
/ip route remove [/ip route find]
Но похоже комада "/ip route find" выдает все маршруты и удаление прерывается сообщением:
failure: can remove only static routes
Как можно в команде "/ip route find" задать уточняющий параметр для статических маршрутов?
by Mike33
Wed Aug 14, 2013 9:36 am
Forum: Wireless Networking
Topic: Groove A-52HPn & CipherLab 8370
Replies: 2
Views: 1510

Re: Groove A-52HPn & CipherLab 8370

Если запустить с компа или с самого Groove пинг до терминала, то терминал не зависает и работает без проблем.
Т.е. получается - если идет хоть какой-то обмен данными между терминалом и чем-либо еще в проводной сети, то проблем нет (хотя при этом все равно Rx Hw. Frames раза в три превышает Rx Frames)
by Mike33
Wed Aug 14, 2013 8:04 am
Forum: Wireless Networking
Topic: Groove A-52HPn & CipherLab 8370
Replies: 2
Views: 1510

Re: Groove A-52HPn & CipherLab 8370

(напишу по русски, т.к. по английски разговариваю плохо) Настраиваю Groove A-52HPn для работы терминалов сбора данных CipherLab 8370 (http://www.scancode.ru/catalog/item/4/36/). Возникла следующая проблема: во время проведения непрерывного эхо-теста через протокол TCP связь идет нормально. А когда в...
by Mike33
Thu Jul 18, 2013 5:45 am
Forum: General
Topic: SXT Lite2 (RouterOS 5.25) - firewall setup
Replies: 8
Views: 4265

Re: SXT Lite2 (RouterOS 5.25) - firewall setup

I found that in this case there are two firewalls: 1) /interface bridge filter 2) /ip firewall filter Tell me please, what the difference between them? It's really two different independent firewalls or the two interfaces to the same firewall? If they are two different firewalls, whether there can ...
by Mike33
Thu Jun 27, 2013 3:25 am
Forum: General
Topic: SXT Lite2 (RouterOS 5.25) - firewall setup
Replies: 8
Views: 4265

Re: SXT Lite2 (RouterOS 5.25) - firewall setup

Thank you all. Everything works fine.
I was helped here – http://forum.nag.ru/forum/index.php?showtopic=86164
So probably MikroTik will have a new regular customer :)
by Mike33
Wed Jun 26, 2013 2:14 pm
Forum: General
Topic: SXT Lite2 (RouterOS 5.25) - firewall setup
Replies: 8
Views: 4265

Re: SXT Lite2 (RouterOS 5.25) - firewall setup

I found that in this case there are two firewalls: 1) /interface bridge filter 2) /ip firewall filter Tell me please, what the difference between them? It's really two different independent firewalls or the two interfaces to the same firewall? If they are two different firewalls, whether there can ...
by Mike33
Tue Jun 25, 2013 3:22 pm
Forum: General
Topic: SXT Lite2 (RouterOS 5.25) - firewall setup
Replies: 8
Views: 4265

Re: SXT Lite2 (RouterOS 5.25) - firewall setup

SXT Lite cannot be configured to be an access point. It is a CPE (client) device only Have you looked at the manual? Yes. I've done everything according to the instructions - http://wiki.mikrotik.com/wiki/Manual:TOC I did a full reset, and then entered the commands: /interface ethernet set 0 name=e...
by Mike33
Tue Jun 25, 2013 2:32 pm
Forum: General
Topic: SXT Lite2 (RouterOS 5.25) - firewall setup
Replies: 8
Views: 4265

Re: SXT Lite2 (RouterOS 5.25) - firewall setup

help please!
by Mike33
Tue Jun 25, 2013 4:06 am
Forum: General
Topic: SXT Lite2 (RouterOS 5.25) - firewall setup
Replies: 8
Views: 4265

SXT Lite2 (RouterOS 5.25) - firewall setup

I need to do the following: 1) configure the device so that it served as the access point; 2) filter traffic passing between the wireless and ethernet segments. I combined wireless and ethernet ports in the bridge and try to configure the firewall. I found that in this case there are two firewalls: ...