"Load previous session" does not work on Winbox v3. Try to use v2.x

Wysłane z mojego Nexus 5 przy użyciu Tapatalka

Thanks 4 your answer. Now I have clear situation

Any solution for error "unable to load unread sms: cannot open port" ?

I changed my RB751U-2HnD, v6.17 to RB951G-2HnD, v6.19, FW: 3.18 and I have this issue now. Errors occur once or twice a day. Modem: ZTE MF636.

On rb751u with s/w 6.17 it worked 100% stable (few months without any error)

What about WiFi range and link quality compared with rb951g-2hnd or rb751u-2hnd?

What is better for 60m^2 flat (only indoor usage):
Any ethernet router + mAP-2n
or
rb951g-2hnd?

Thanks

That's why I still use Winbox 2.x

Pls fix this

But that's why i used only IP addresses in my example without any info about domain. In this case one domain = no domain (I think)

One domain, differend port numbers

@mxmxmxmxmx
Yes, it is possible because it IS working on 5.25. Client and server connected to the switch and switch connected to one port of MT

@THG
yes, client computer connected to the switch

so tell me how to add static DNS entry that redirects me from port 81 to port 80? I want to put address http://<my_domain>:81 in my web browser and get connection to server2 on port 80 (10.1.1.196:80) Another time I want to put address http://<my_domain>:80 and get connection to server1 on port 80 (...

It won't work. As you can see I'm changing ports in dstnat.

Example: http://i.imgur.com/6bsb4Xz.png config: /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 add action=masquerade chain=srcnat dst-address=10.1.1.196 dst-port=80 \ protocol=tcp src-address=10.1.1.0/24 add action=dst-nat chain=dstnat dst-address=192.168.1.211 dst-port=80 ...

Hi. I have problem with my RB751u-2hnd and rb951g-2hnd. I'm trying to configure hairpin nat on ROS v6.x according to http://wiki.mikrotik.com/wiki/Hairpin_NAT Before upgrade to 6.x it was working perfectly, but now srcnat doesn't see this packages so it doesn't work. Is there any another way to conf...

I have similar problem..

i have queue with time: 19:00:00 to 23:00:00

It worked well on 5.25, but on 6.1 it's red on list and doesnt work.
I can set "from" time in 00:00:00 to 15:59:59, but with 16+ its invalid