Community discussions

Search found 207 matches

by Petzl
Fri Mar 29, 2019 11:52 am
Forum: General
Topic: Mikrotik: Change the default Powerbox config!
Replies: 16
Views: 1483

Re: Mikrotik: Change the default Powerbox config!

we reset them before installation
by Petzl
Tue Feb 12, 2019 9:54 pm
Forum: RouterBOARD hardware
Topic: PowerBox powering options
Replies: 10
Views: 872

Re: PowerBox powering options

The powerbox pro or omnitik AC is much better than the regular powerbox
by Petzl
Wed Dec 19, 2018 12:42 am
Forum: General
Topic: Mikrotik powered christmas tree
Replies: 2
Views: 518

Mikrotik powered christmas tree

the famous ipv6 christmas tree is back ! Powered by mikrotik ... http://jinglepings.com/ Does not replay on ping and traceroute ! If you're wondering how it works, make sure to watch the MUM video at http://mum.mikrotik.com/2016/NL/agenda Mine was called "Category based firewalling on RouterOS, the ...
by Petzl
Sat Jun 30, 2018 4:36 pm
Forum: Announcements
Topic: Photos of towers and masts
Replies: 55
Views: 15605

Re: Photos of towers and masts

20180315_172631.jpg
DSCN9630.JPG
by Petzl
Sat Jun 30, 2018 4:16 pm
Forum: Announcements
Topic: Winbox v3.15 released!
Replies: 21
Views: 7236

Re: Winbox v3.15 released!

New version is crashing in Debian. old version (3.13) works great.
Works fine here, using wine
by Petzl
Thu May 31, 2018 9:06 pm
Forum: RouterBOARD hardware
Topic: CRS112 and CRS328 inside pictures
Replies: 1
Views: 477

CRS112 and CRS328 inside pictures

I took some pictures of the inside of a CRS328 and a CRS112. It seems that it's perfectly possible to modify the CRS328 to a solution with backup power on 24 and 48V There is a 24V psu for the board, There is a 2nd 24V / 48V psu for the POE part. https://drive.google.com/drive/folders/0B8uP6lMFhyXcL...
by Petzl
Sun May 13, 2018 10:50 pm
Forum: RouterBOARD hardware
Topic: New : RB760IGS - HEX-S
Replies: 38
Views: 14352

New : RB760IGS - HEX-S

hEX S hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 8...
by Petzl
Fri Jan 26, 2018 1:57 am
Forum: RouterBOARD hardware
Topic: Hex POE
Replies: 0
Views: 431

Hex POE

Id like to have the included POE injector ....

I think someone did make a copy paste fault from the powerbox pro
Skype_Picture.jpeg
by Petzl
Tue Aug 15, 2017 2:09 am
Forum: RouterBOARD hardware
Topic: crs210-8g-2s+in ether1 port flap
Replies: 7
Views: 916

Re: crs210-8g-2s+in ether1 port flap

I think it has something to do with the fact that port1 is also the POE port.

i had the same problem on a CRS112 and CRS210
by Petzl
Thu Jun 08, 2017 12:00 am
Forum: RouterBOARD hardware
Topic: CCR 1009-7G-1C-1S+ is safe powering on PoE
Replies: 4
Views: 899

Re: CCR 1009-7G-1C-1S+ is safe powering on PoE

sometimes It's not safe to use POE on a CCR1009, and newer gigabit devices. If you have a long cable and a low starting voltage (running on batteries or 12V) then you will blow the POE port due to the higher amps it will use on low voltages. even the new devices have problems like the HAP AC, if you...
by Petzl
Tue Jan 10, 2017 9:50 pm
Forum: RouterBOARD hardware
Topic: New product : HAP Mini (RB931-2ND)
Replies: 15
Views: 7955

New product : HAP Mini (RB931-2ND)

by Petzl
Mon Jan 02, 2017 4:51 pm
Forum: General
Topic: winbox for ubuntu
Replies: 37
Views: 35465

Re: winbox for ubuntu

Since 6.30 i have also problems connecting with mac on my old debian linux laptop, for some devices it was solved to clean the winbox cache.

Before i had never problems, what you need to do, to get mac connection possible on wine, is adding a default gateway in you static address configuration.
by Petzl
Sun Sep 18, 2016 12:31 pm
Forum: RouterBOARD hardware
Topic: how to turn off all LED's on Dynadish
Replies: 8
Views: 1607

Re: how to turn off all LED's on Dynadish

Tape will not help reducing power consumption ....
by Petzl
Sat Sep 17, 2016 10:53 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 134317

Re: HAP AC

I have 19 HAP AC's and on none of them it is possible to get the 2.4 ghz working correctly ...

- i did also lower the tx power, still not working
by Petzl
Tue Aug 30, 2016 9:31 pm
Forum: RouterBOARD hardware
Topic: How do you fix a broken greentelfth fiber optics line
Replies: 5
Views: 873

Re: How do you fix a broken greentelfth fiber optics line

For FTTH the equipment is not so expensive , i did buy my splicer fot 1700 euro. ex tax (Easy splicer)

if you want to play with fiber you can also buy some cheap chinese fiber cutter and use Quick connectors.

for multimode this works great, for single mode i only recommend this for a quick fix.
by Petzl
Sat Jul 23, 2016 2:31 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 134317

Re: HAP AC

i have also one only working on channel 1 with 20 mhz ...
by Petzl
Wed Jul 13, 2016 10:51 pm
Forum: RouterBOARD hardware
Topic: Negative to Ground connection
Replies: 5
Views: 997

Re: Negative to Ground connection

the negative is connected with the ground in all mikrotik products.

why power it with POE ?
by Petzl
Tue Jul 12, 2016 2:06 am
Forum: RouterBOARD hardware
Topic: What is the deference between RB921GS-5HPacD & RB921GS-5HPacD r2 ❔
Replies: 2
Views: 883

Re: What is the deference between RB921GS-5HPacD & RB921GS-5HPacD r2 ❔

Where do you see it ?

r2 = some times lite version, level3
r2 means also sometimes hardware revision 2, like the new omnitik
by Petzl
Sat Jul 09, 2016 2:45 am
Forum: General
Topic: Packet loss, cured by using the Packet Sniffer
Replies: 7
Views: 1501

Re: Packet loss, cured by using the Packet Sniffer

what if you don't use port 1 ?
by Petzl
Thu Jul 07, 2016 11:40 pm
Forum: RouterBOARD hardware
Topic: Omnitik has a new PCB Design
Replies: 3
Views: 1150

Omnitik has a new PCB Design

The internal PCB of the omnitik is changed, it has a new CPU where the wireless is integrated. new name : OmniTIK U-5HnD r2 https://s31.postimg.org/afx5252yj/omnitik1.jpg https://s31.postimg.org/682cte1iz/omnitik2.jpg https://s31.postimg.org/zbqkpmpmj/omnitik3.jpg https://s32.postimg.org/ba1b55z9x/o...
by Petzl
Mon Jun 20, 2016 1:49 am
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 19309

Re: Winbox3.4 released!

Today, i had to use v3.2 again to connect over mac ...

i'm using linux + wine .... v3.2 is working fine v 3.4 does not connect
by Petzl
Fri Jun 17, 2016 12:05 am
Forum: RouterBOARD hardware
Topic: BIDI (WDM single fiber) SFP Transceiver
Replies: 2
Views: 1258

Re: BIDI (WDM single fiber) SFP Transceiver

I think you can't do WDM over multimode .... since multimode does reflects signals back to the source.
by Petzl
Wed Jun 08, 2016 8:23 pm
Forum: RouterBOARD hardware
Topic: CRS112-8G-4S-IN
Replies: 1
Views: 715

Re: CRS112-8G-4S-IN

+ 1
by Petzl
Wed Jun 01, 2016 1:44 pm
Forum: RouterBOARD hardware
Topic: Mikrotik RS485 support?
Replies: 5
Views: 2554

Re: Mikrotik RS485 support?

Can you first post why you need this?
by Petzl
Sat May 28, 2016 12:22 am
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 19309

Re: Winbox3.4 released!

I'm using wine , since version 3.4 it's not possible to connect to MAC
if i use a older version 3.2 it's wokring fine in wine


Solved, i was using winbox using win7 emulation, the default setting did solve it.
by Petzl
Sat Apr 09, 2016 2:05 am
Forum: RouterBOARD hardware
Topic: Earth grounding of rb922
Replies: 4
Views: 1006

Re: Earth grounding of rb922

Plugs did cost me 10$ for 40 pieces on ali-express
by Petzl
Mon Apr 04, 2016 12:08 am
Forum: RouterBOARD hardware
Topic: Earth grounding of rb922
Replies: 4
Views: 1006

Re: Earth grounding of rb922

is this a solution ?

Image
by Petzl
Wed Mar 30, 2016 7:22 pm
Forum: RouterBOARD hardware
Topic: RBGPOE fails to power up RB912UAG-2HPnD (but succeeds powering up RB260GSP)
Replies: 3
Views: 816

Re: RBGPOE fails to power up RB912UAG-2HPnD (but succeeds powering up RB260GSP)

does the problem with the shielded cable also affect the RB912?
by Petzl
Thu Mar 24, 2016 11:47 pm
Forum: Beginner Basics
Topic: CCR1036 not passing data through sfp
Replies: 3
Views: 1567

Re: CCR1036 not passing data through sfp

and with regular SFP modules ?

Can you test a longer cable or a attenuator ?
by Petzl
Sun Mar 20, 2016 11:29 pm
Forum: RouterBOARD hardware
Topic: Why mAP lite is so... loud?
Replies: 5
Views: 1111

Re: Why mAP lite is so... loud?

i don't think it has a fan or a speaker
by Petzl
Fri Mar 18, 2016 10:08 pm
Forum: General
Topic: Feature Request: Indoor reset for outdoor units
Replies: 11
Views: 2612

Re: Feature Request: Indoor reset for outdoor units

just don't forget passwords , you can add more than one user!
by Petzl
Sat Feb 27, 2016 3:01 am
Forum: General
Topic: Eth1 poe port won't do gigabit
Replies: 11
Views: 1889

Re: Eth1 poe port won't do gigabit

i think it's a design flaw , just don't use that port
by Petzl
Sat Feb 27, 2016 2:55 am
Forum: RouterBOARD hardware
Topic: CRS226 - Poe-in Juniper
Replies: 1
Views: 538

Re: CRS226 - Poe-in Juniper

mikrotik only supports passive POE
by Petzl
Wed Feb 24, 2016 12:55 am
Forum: RouterBOARD hardware
Topic: CCR1009 8G 1S 1S+ Powering on PoE Safe or Not?
Replies: 2
Views: 950

Re: CCR1009 8G 1S 1S+ Powering on PoE Safe or Not?

Don't use POE for the CRS1009!

If the voltage is lower than 24V then the CCR will use to much current and POE port will fry.

I did had this problem when using a long cable.
by Petzl
Wed Feb 24, 2016 12:51 am
Forum: General
Topic: Eth1 poe port won't do gigabit
Replies: 11
Views: 1889

Re: Eth1 poe port won't do gigabit

I did notice packet loss on port 1 of all my CRS109 and CRS112

No Poe injector was used
by Petzl
Wed Feb 17, 2016 6:07 pm
Forum: RouterBOARD hardware
Topic: CRS210-8G-2S+IN Port 1 Consistent FAIL to 100Mbps
Replies: 4
Views: 1191

Re: CRS210-8G-2S+IN Port 1 Consistent FAIL to 100Mbps

there was a bugfix in the latest firmware for this

i did had a problem with the crs-112, i had packet loss on port 1, i cant check if it is solved with the new firmware since it is installed at a customer.
by Petzl
Wed Feb 17, 2016 12:46 am
Forum: RouterBOARD hardware
Topic: Can't find a CCR1072-8G-8S-4S+ or similar
Replies: 2
Views: 773

Re: Can't find a CCR1072-8G-8S-4S+ or similar

add a CRS210-8G-2S+IN to it and you have what you want....
by Petzl
Sun Jan 31, 2016 4:14 pm
Forum: Announcements
Topic: v6.34 [current] is released!
Replies: 91
Views: 22915

Re: v6.34 [current] is released!

*) crs212 - fix 1Gbps ether1 linking problem;

i did had some packetloss on port 1 of a CRS212, hope this can be solved with this fix.
the stange thing was that i had this problem also on a CRS109.
by Petzl
Thu Jan 07, 2016 7:16 pm
Forum: RouterBOARD hardware
Topic: purpose USB port omnitik
Replies: 6
Views: 1624

Re: purpose USB port omnitik

by Petzl
Thu Jan 07, 2016 6:05 pm
Forum: RouterBOARD hardware
Topic: purpose USB port omnitik
Replies: 6
Views: 1624

Re: purpose USB port omnitik

i use it for a GPS, for time sync on closed networks.

also for a grouding USB cable

and a also like to use it for a wardriving GPS, if someone can make a script for it.
by Petzl
Thu Jan 07, 2016 4:59 pm
Forum: RouterBOARD hardware
Topic: CRS-112 packet loss on POE port 1
Replies: 0
Views: 1135

CRS-112 packet loss on POE port 1

This is the 2nd time i notice packet loss on a CRS device, this time it is a CRS-112

about 10% packet loss on Port 1 (this is also the master and poe port)

this is not the first time i do notice this, the first time was on a CRS 109
by Petzl
Tue Jan 05, 2016 10:57 pm
Forum: RouterBOARD hardware
Topic: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?
Replies: 5
Views: 1351

Re: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?

it is not intended to use it in harsh locations...
the weather in belgium is nothing special .... only once in 3-5 years we have some real bad weather ...

it's actualy verry unsafe to install these thing on high locations, since they can come down ...

for home use it will be a good antenna.
by Petzl
Mon Jan 04, 2016 11:00 pm
Forum: RouterBOARD hardware
Topic: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?
Replies: 5
Views: 1351

Re: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?

I don't like al the plastic that is used today ....

last year we had a hail storm and some antenna's didn't survive it.

a plastic bracket for a metal antenna wil make it worse ...
by Petzl
Wed Dec 30, 2015 11:28 pm
Forum: General
Topic: Omnitik AC equivalent
Replies: 3
Views: 944

Re: Omnitik AC equivalent

A omnitik is a great antenna, i have currently 260 of them in production .

at the moment there is for me no need to have a AC version, first i need to upgrade some links to AC for that
i use omnitik only for routing , client access and backup link.
by Petzl
Tue Dec 29, 2015 11:51 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Router with RouterOS v6.17 Password Lost for Admin
Replies: 4
Views: 1559

Re: RB1100AHx2 Router with RouterOS v6.17 Password Lost for Admin

do you have some backupfiles of the configuration ?

with the old backup files it was possible to get the password.

can't you just ask the password ?
by Petzl
Thu Dec 24, 2015 10:38 pm
Forum: SwOS
Topic: RB260GSp SWOS Issues v1.14
Replies: 7
Views: 2860

Re: RB260GSp SWOS Issues v1.14

I had the problem that the RB260GSP did shutdown the SFP port, even with the latest firmware, i replaced it by a FTC and now its working fine.
by Petzl
Thu Dec 24, 2015 6:16 pm
Forum: RouterBOARD hardware
Topic: where are the Rackmount ears sold ?
Replies: 1
Views: 1030

where are the Rackmount ears sold ?

Where to buy the rackmount ears ?

i did buy some CRS-112 and no ears where included, it's a shame that there is no mounting solution for a fiber capable device.

Image
by Petzl
Thu Oct 29, 2015 12:19 am
Forum: RouterBOARD hardware
Topic: Omnitik Radio stops working
Replies: 1
Views: 392

Omnitik Radio stops working

since upgrading from 6.12 to 6.27 and higher we have some problems with omnitiks

The wireless stops working, and the only solution is reboting the omnitik.
- Scan wil give no result
- Enable / disable does not help.
by Petzl
Thu Oct 22, 2015 9:10 am
Forum: RouterBOARD hardware
Topic: Omnitik Grounding Solution
Replies: 2
Views: 885

Re: Omnitik Grounding Solution

on new ones it's better to solder a grounding wire, since we have to open them for soldering the POE out.

currently we have 241 omnitiks deployed on our little hobby network.
this usb grouding solution is perfect for existing nodes.
by Petzl
Wed Oct 21, 2015 9:47 pm
Forum: RouterBOARD hardware
Topic: Omnitik Grounding Solution
Replies: 2
Views: 885

Omnitik Grounding Solution

Since i have noticed i had more broken ports since i was installing omnitiks, I had to find a solution. mostly there was also 1 other device broken like a nanostation or powerbeam due to lightning strikes before we used the RB493 in towers and they even did survive direct lightning strikes. I also l...
by Petzl
Wed Oct 21, 2015 9:30 pm
Forum: RouterBOARD hardware
Topic: Mikrotik policy on the announcement and production of new products
Replies: 7
Views: 1201

Re: Mikrotik policy on the announcement and production of new products

A DC jack mounted upside down will fail in a tower due to vibration !
by Petzl
Fri Oct 02, 2015 1:06 am
Forum: RouterBOARD hardware
Topic: omnitik going nuts
Replies: 7
Views: 1147

Re: omnitik going nuts

I had last summer a omnitik with bad capacitors ...
by Petzl
Tue Sep 01, 2015 3:05 am
Forum: RouterBOARD hardware
Topic: Poor SXT Power Adapter Quality
Replies: 19
Views: 3219

Re: Poor SXT Power Adapter Quality

I only use ubnt adapters, sometimes i use the mikrotik 24V 1A adapters.

i did try 2 times a 24V 0.38A adapter, they die verry quick.
when i opened one, the capacitors where crushed to get it into the plastic housing.
by Petzl
Sun Aug 30, 2015 3:47 pm
Forum: RouterBOARD hardware
Topic: MIKROTIK ROUTERBOARD WAP 2ND
Replies: 9
Views: 3840

Re: MIKROTIK ROUTERBOARD WAP 2ND

They did something wrong with the pcb design .... i gues there are some filters connected to ground and that 48V is to much for these components ...
by Petzl
Tue Aug 25, 2015 2:02 am
Forum: RouterBOARD hardware
Topic: Easysplicer experience
Replies: 4
Views: 1286

Re: Easysplicer experience

I did contact support about my problems with the heat shrink oven i upgraded from 2.60 to the 2.70 firmware, and now it is working perfect. and i learned a lesson while upgrading, had some problems with the ST micro driver, i was trying for 1 hour with 3 diffirent laptops then RTFM did solve the dri...
by Petzl
Sun Aug 23, 2015 8:08 pm
Forum: RouterBOARD hardware
Topic: Easysplicer experience
Replies: 4
Views: 1286

Re: Easysplicer experience

excluding taxes +- 1400 euro

the shrinktubes i do with my weller at the moment ....
by Petzl
Sun Aug 23, 2015 3:22 pm
Forum: RouterBOARD hardware
Topic: Easysplicer experience
Replies: 4
Views: 1286

Re: Easysplicer exprerience

11894502_10154100380457080_5776957523034034854_o.jpg
by Petzl
Sun Aug 23, 2015 3:21 pm
Forum: RouterBOARD hardware
Topic: Easysplicer experience
Replies: 4
Views: 1286

Easysplicer experience

Hi all, i did buy an easysplicer, and I'm realy satisfied with it. Last month i did upgrade a lot of my locations with fiber. more information : https://www.youtube.com/results?search_query=easysplicer http://www.easysplicer.com in one month time i did over 120 welds, it's really handy to be able to...
by Petzl
Sat Aug 15, 2015 1:21 am
Forum: RouterBOARD hardware
Topic: MTBF of RouterBOARD
Replies: 16
Views: 3923

Re: MTBF of RouterBOARD

We always use meanwell power supply's with batt pack in 10 jears time on a network with 5000 wireless devies and 800 mikrotiks and we had like 12 mikrotiks broken for no reason. , at the moment we use mikrotik for routing, 87% of the wireless hardware is from a other brand. and +- 40 mikrotiks did g...
by Petzl
Wed Aug 12, 2015 9:24 pm
Forum: RouterBOARD hardware
Topic: PoE Cisco + Ubiquiti + Mikrotik
Replies: 2
Views: 1106

Re: PoE Cisco + Ubiquiti + Mikrotik

The converter is not a gigabit model ...

try forcing it to 100mbit
by Petzl
Sat Aug 08, 2015 1:49 am
Forum: RouterBOARD hardware
Topic: CCR1009 + Poe24V = smoke ?
Replies: 0
Views: 480

CCR1009 + Poe24V = smoke ?

You can power the CCR1009-8G-1S with POE , there is only one problem if you use 24V or less and / or a long cable .

Since the CCR1009-8G-1S uses up to 34W , the current is to high at 24v or less.
In this situation the ethernet transformers wil give smoke.
by Petzl
Thu Aug 06, 2015 11:54 pm
Forum: General
Topic: Block Torrents & p2p Traffic 100% working on all versions
Replies: 57
Views: 153234

Re: Block Torrents & p2p Traffic 100% working on all versions

this even blocks news sites if there is something mentioned about torrents.

this does not work if you use https
by Petzl
Mon Jul 27, 2015 12:57 am
Forum: General
Topic: Wishlist : More options for watchdog
Replies: 1
Views: 488

Wishlist : More options for watchdog

- monitor 2 ip's, if both are down then reboot.
if you now ping a defect router , then the good router will also reboot.

- more options like time between pings
by Petzl
Tue Jun 30, 2015 10:36 am
Forum: General
Topic: Did we loose IP cloud?
Replies: 155
Views: 26192

Re: Did we loose IP cloud?

I have problems that ip cloud is not updating in winbox it says updated, only the ip is changed since then. if i do force update then it is ok. i'm using ip cloud behind a NAT router. - is the ip cloud update timed ? - does it only update when wan ip is updated ? (routerboard wan ip is internal ip) ...
by Petzl
Sun Jun 14, 2015 9:28 pm
Forum: RouterBOARD hardware
Topic: PoE in long cable
Replies: 1
Views: 987

Re: PoE in long cable

everyone solders a wire between poe in and poe out ...
by Petzl
Fri Jun 12, 2015 2:15 pm
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 30778

Re: Mikrotik DynaDish 5

can you tell what is wrong in the design ?

it must be something between power lines and ground

can we use 48V passive POE ?
by Petzl
Thu Jun 11, 2015 9:23 pm
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 30778

Re: Mikrotik DynaDish 5

Something wrong with the design ?

some people like to know why it is not possible with shielding.

If we don't use shielding al our links would-be running @ 10 mbit half duplex
by Petzl
Tue Jun 09, 2015 10:55 am
Forum: Announcements
Topic: v6.29 released
Replies: 193
Views: 49625

Re: v6.29 released

I have a lot of omnitiks that stopped working , or getting un responsive 6.29 RC13

i have romon enabled
will upgrade some to 2.29.1
by Petzl
Tue May 19, 2015 7:46 pm
Forum: General
Topic: v6.29 will be released this week!
Replies: 65
Views: 13418

Re: v6.29 will be released this week!

I did some upgrades on RB493AH from 6.12 to 6.29cr13 to test ROMON

With 6.29 it seems that the ethernet ports sometimes go down and up.
by Petzl
Tue May 12, 2015 12:55 am
Forum: RouterBOARD hardware
Topic: PoE Injector directionality
Replies: 3
Views: 668

Re: PoE Injector directionality

Normaly not.

connect then both to an omnitik .... then you also have a backup device ...
or use a multiport poe injector

jou can also use 1 POE injector with cable (male - female )+ 1 poe injector with 2 female plugs.
you need to have 2 DC plugs, and jou can connect them to the same powersupply.
by Petzl
Sat May 09, 2015 9:30 pm
Forum: RouterBOARD hardware
Topic: RB 750UP Gigabit Version
Replies: 19
Views: 5158

Re: RB 750UP Gigabit Version

Laptops do have mostly a special laptop plug , and most DC plugs have thin cables ...

We do some times have burnouts , mostly if the power supply is running on batteries so the current rises
by Petzl
Sat May 09, 2015 3:47 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136690

Re: Sample Installations - Sticky Please

Omnitik U5HND with POE OUT, Soldered inside omnitik
DSCN6092_1.JPG
Also my special roof ladder
CROPDSCN6085.jpg
by Petzl
Sat May 09, 2015 3:38 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136690

Re: Sample Installations - Sticky Please

CRS125-24G-1S-RM
DSCN8464_1.JPG
DSCN8467_1.JPG
by Petzl
Fri May 08, 2015 12:24 am
Forum: General
Topic: romon
Replies: 2
Views: 497

Re: romon

Next problem on a other part of the network. A : omnitik in the center of the network B : Grove connected to omnitik with ethernet C: CRS24 on remote site 1 over UBNT WDS bridge D: Omnitik on remote site 2 over UBNT WDS bridge E: RB2011 connected to omnitik on remote site 2 A can see B , C, D and E ...
by Petzl
Thu May 07, 2015 8:41 pm
Forum: General
Topic: romon
Replies: 2
Views: 497

Re: romon

I found the problem, they are all connected to the same omni antenna wich is not yet in WDS mode.
by Petzl
Thu May 07, 2015 8:31 pm
Forum: General
Topic: romon
Replies: 2
Views: 497

romon

I'm testing romon on my network, and i have the problem that some devices can't see others .... with ip neighbors i can see all the boards ...

i did enable romon and put on all the boards the same secret.
by Petzl
Sun Apr 12, 2015 12:52 pm
Forum: RouterBOARD hardware
Topic: POE out not working on OmniTIK UPA 5HnD
Replies: 14
Views: 12380

Re: POE out not working on OmniTIK UPA 5HnD

Does the ethernet link come up on the laptop / switch side ?

For configuring use Ether 2-5
by Petzl
Sun Mar 29, 2015 10:06 pm
Forum: RouterBOARD hardware
Topic: R5SHpn - MAJOR PROBLEMS - Cards burn out in just a few seconds
Replies: 14
Views: 2536

Re: R5SHpn - MAJOR PROBLEMS - Cards burn out in just a few seconds

If the driver does not known the card correctly this may happen
by Petzl
Sat Mar 14, 2015 10:56 am
Forum: General
Topic: Tunnel get only 400Mbps on CCR1036
Replies: 12
Views: 3018

Re: Tunnel get only 400Mbps on CCR1036

2 Bonding tunnels ?
by Petzl
Thu Feb 19, 2015 1:23 pm
Forum: RouterBOARD hardware
Topic: crs109 wallmount holes?
Replies: 11
Views: 2599

Re: crs109 wallmount holes?

Can we get those rack ears somewhere ?
by Petzl
Fri Feb 06, 2015 12:25 am
Forum: General
Topic: Tapatalk and Karma
Replies: 60
Views: 4829

Re: New Forum Skin

I forced it to the old style, now even the old style is gone ...
by Petzl
Mon Jan 26, 2015 11:58 pm
Forum: General
Topic: Routerboard with POE in and POE out
Replies: 10
Views: 1767

Re: Routerboard with POE in and POE out

regular Omnitik on the roof with soldered ports ... not UPA model wich doesn't work verry well ...
by Petzl
Mon Jan 12, 2015 7:50 pm
Forum: RouterBOARD hardware
Topic: Any plans for GBit PoE out ethernet router
Replies: 7
Views: 1554

Re: Any plans for GBit PoE out ethernet router

CRS-110 8G S 2HnD will have this option i think

see internal pictures of the CRS-109 where the PCB is labeled CRS-110 and there also POE out connector

https://drive.google.com/folderview?id= ... sp=sharing
by Petzl
Tue Dec 23, 2014 2:35 am
Forum: RouterBOARD hardware
Topic: Rackmount option for CRS-212 ?
Replies: 0
Views: 569

Rackmount option for CRS-212 ?

When does mikrotik offer a rackmount option for CRS-100-200 series ?

i did now a test with non MT versions, but they are to short.
by Petzl
Sun Nov 30, 2014 12:05 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 54801

Re: 6.22 released!

Upgrading Omnitik from 5.24 to 6.13 works fine.
But after that, upgrade from 6.13 to 6.22 delete all my wlan1 configuration, exactly in the same way that 5.26 to 6.14.....
Same problem i have, sometimes ....

it looks like it has found a new wlan adapter ... and lost the ols one
by Petzl
Tue Nov 25, 2014 12:28 am
Forum: General
Topic: Access AP without giving manual ip to pc.
Replies: 4
Views: 662

Re: Access AP without giving manual ip to pc.

Why 3.3.3.22 ? is this realy your internet ip, or something you chose ?
by Petzl
Mon Nov 17, 2014 9:55 am
Forum: General
Topic: Missing DDM information for SFP port?
Replies: 4
Views: 1427

Re: Missing DDM information for SFP port?

i think that the cheaper devices like 2011 dont support it ...
by Petzl
Sun Nov 16, 2014 1:41 pm
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 54801

Re: 6.22 released!

Problems after upgrading to 6.22 with omnitik u5hnd

with my 3 test omnitiks the Wlan1 interface has changed to wlan2 , and configuration is gone.
Also had to add it back to the bridge interface ...
by Petzl
Sun Nov 16, 2014 1:05 pm
Forum: RouterBOARD hardware
Topic: Groove 52HPn Dead?
Replies: 2
Views: 1265

Re: Groove 52HPn Dead?

try with a other power supply ....
by Petzl
Sun Nov 16, 2014 12:59 pm
Forum: General
Topic: IP Camera Subnet
Replies: 36
Views: 6338

Re: IP Camera Subnet

in the beginning there where hubs , then your trafic goes to all devices in the network. since the invention of switch the trafic only goes to the devices that need the trafic ... so if you put a POE switch in between and also connect the NVR to it, than there wil be no trafic going to the main swit...
by Petzl
Fri Nov 14, 2014 7:33 pm
Forum: General
Topic: IP Camera Subnet
Replies: 36
Views: 6338

Re: IP Camera Subnet

just remove port 4 from the switch (master port) or bridge

then ip adresses add 192.168.2.1/24 to port 4

that is all you need to do i think
by Petzl
Tue Nov 11, 2014 12:59 am
Forum: General
Topic: How do I know what fiber a Mikrotik SFP will work with?
Replies: 7
Views: 2409

Re: How do I know what fiber a Mikrotik SFP will work with?

Most common types : Orange OM1 62.5 micron multimode mostly BNC type connector (ST) Orange OM2 50 micron multimode Light blue OM3 50 micron multimode (laser optimised) You need a multimode fiber SFP (mostly 550meter, some up to 2km) Multimode mostly uses grey connectors -----------------------------...
by Petzl
Sat Nov 08, 2014 8:33 pm
Forum: General
Topic: Bircked mAP2n within 15min
Replies: 6
Views: 1483

Re: Bircked mAP2n within 15min

I have sometimes the problem that the power led is verry dark, i think it doen't boot then also
by Petzl
Mon Nov 03, 2014 10:04 pm
Forum: RouterBOARD hardware
Topic: OmniTik UPA: Observations & Issues
Replies: 67
Views: 21687

Re: OmniTik UPA: Observations & Issues

interesting stuff, would this also work with an RB4xx series board?
i use it for the 493 series ...
by Petzl
Sat Oct 25, 2014 7:29 am
Forum: General
Topic: route to device without default gateway??
Replies: 3
Views: 1075

Re: route to device without default gateway??

what does the device if you use dhcp ? (you can make this static)

does it then accept a default gateway?
by Petzl
Tue Oct 21, 2014 1:41 am
Forum: RouterBOARD hardware
Topic: MIKROTIK Routerboard RB260GSP - POE don`t work on Mobotix?
Replies: 4
Views: 1023

Re: MIKROTIK Routerboard RB260GSP - POE don`t work on Moboti

the mAP works with mobotix if you give it 48VDC,
by Petzl
Sun Oct 19, 2014 11:01 am
Forum: RouterBOARD hardware
Topic: CRS109 Port 1 not compatible with my laptop ?
Replies: 1
Views: 570

Re: CRS109 Port 1 not compatible with my laptop ?

can it be this ?

v6.21rc
*) fixed - master port on AR8327 switches that is put into bridge could sometimes not work properly;
by Petzl
Sat Oct 18, 2014 11:51 am
Forum: RouterBOARD hardware
Topic: CCR-1016 - memory test failed
Replies: 3
Views: 1054

Re: CCR-1016 - memory test failed

what is the test command ?
by Petzl
Sat Oct 18, 2014 1:45 am
Forum: RouterBOARD hardware
Topic: CRS109 Port 1 not compatible with my laptop ?
Replies: 1
Views: 570

CRS109 Port 1 not compatible with my laptop ?

I have a CRS 109, V6.20 FW3.18 If i connect my laptop to port 1 (all the other work fine) then the port goes up and down every 5 seconds. The laptop is a dell latitude E6520 with gigabit port. Eth1 is configured as master, 2-8 + SFP are slave I think it has something to do with the fact that Eth1 is...
by Petzl
Wed Oct 15, 2014 8:53 am
Forum: RouterBOARD hardware
Topic: CRS MAC address learning problem
Replies: 11
Views: 3224

Re: CRS MAC address learning problem

also the latest routerboard firmware ?

the 1100 is more powerfull than a CRS, is it used for routing ?
by Petzl
Thu Oct 09, 2014 8:11 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD naming
Replies: 47
Views: 24497

Re: RouterBOARD naming

r2 is client of ptp only i think , so no AP mode
by Petzl
Thu Oct 09, 2014 6:16 pm
Forum: General
Topic: Help! "excessive broadcasts/multicast, probably a loop"
Replies: 22
Views: 30201

Re: Help! "excessive broadcasts/multicast, probably a loop"

i sometimes configure netwatch to see if devices are online

then i start disabling interfaces,

last time with a customer, even if i disabled ports everything did stay online,
the customer installed a wireless sonos hifi system, connected them wireless together and then did use cable on both sides.
by Petzl
Thu Oct 09, 2014 2:41 pm
Forum: RouterBOARD hardware
Topic: CRS109 - CRS110 POE out ? (internal pictures)
Replies: 1
Views: 754

Re: CRS109 - CRS110 POE out ? (internal pictures)

The "EU" label on the boxes is the type of power suply i think.
by Petzl
Thu Oct 09, 2014 1:44 pm
Forum: RouterBOARD hardware
Topic: CRS109 - CRS110 POE out ? (internal pictures)
Replies: 1
Views: 754

CRS109 - CRS110 POE out ? (internal pictures)

i did make some pictures of a CRS109 there is a POE out connector, and its also labeled CRS110 All Pictures : https://drive.google.com/folderview?id=0B8uP6lMFhyXcLWIxTWwwQ1I1U2s&usp=sharing Also, on the last new RB951UI there is a large "EU" sticker on the box https://lh4.googleusercontent.com/QCISl...
by Petzl
Wed Oct 08, 2014 12:34 am
Forum: RouterBOARD hardware
Topic: CCR1036 Bad RAM - 2 units so far
Replies: 8
Views: 1393

Re: CCR1036 Bad RAM - 2 units so far

We currently use 6.12 , 6.19 and 6.20 do crash wirh in 20 minutes, then the hardware watchdog is rebooting the router.

1 internet GBP feed to a Cisco router
2 local bgp sessions

supout is sometimes created, reading this file in on the MT website does not help me find the problem.
by Petzl
Sun Oct 05, 2014 11:50 pm
Forum: General
Topic: Feature Request: Log Wireless Scan SSID List Remotelly
Replies: 11
Views: 2695

Re: Feature Request: Log Wireless Scan SSID List Remotelly

I'd like to use a omnitik for range plotting (wardriving your own ssid's to get a coverage map of the network)
by Petzl
Sun Sep 28, 2014 12:14 am
Forum: General
Topic: Winbox NOT discovering anything
Replies: 4
Views: 921

Re: Winbox NOT discovering anything

and not connected on port 1 of the routerboard?
by Petzl
Wed Sep 24, 2014 8:55 pm
Forum: RouterBOARD hardware
Topic: mAP Firmware?
Replies: 2
Views: 1001

Re: mAP Firmware?

It's just a small routerboard running on the same software ...
by Petzl
Wed Sep 24, 2014 10:00 am
Forum: General
Topic: DVR forward to Mikrotik Public IP - NOT Working!
Replies: 3
Views: 951

Re: DVR forward to Mikrotik Public IP - NOT Working!

so

internet - mikrotik - home router - DVR ?

on wich port does the home router listen ?
first try with the same ports; 1 on 1 mapping
by Petzl
Mon Sep 22, 2014 12:58 am
Forum: General
Topic: Short power cuts make routers reset!
Replies: 17
Views: 2576

Re: Short power cuts make routers reset!

I have a Routerboard that is not keeping a new configuration ...

in my case the power drops slowly untill the batteries are dead...

it does reset to a previous config (not default)
by Petzl
Sat Sep 20, 2014 5:39 pm
Forum: Forwarding Protocols
Topic: Loss of BGP function after 3-4 weeks
Replies: 16
Views: 3112

Re: Loss of BGP function after 3-4 weeks

why u use webfig and not winbox ?

just a question, i prefer winbox over webfig
by Petzl
Sat Sep 20, 2014 12:26 pm
Forum: General
Topic: is it dead?
Replies: 7
Views: 1498

Re: is it dead?

don't forget to upgrade board firmware if possible (for the led problem)

We have like 1000 devices, and almost never had a broken one ...

how did you get them like this ?
by Petzl
Thu Sep 18, 2014 6:51 pm
Forum: RouterBOARD hardware
Topic: 48V Mikrotik
Replies: 4
Views: 1763

Re: 48V Mikrotik

I have never used warranty .... mostly it cost more to send it back ....
by Petzl
Thu Sep 18, 2014 4:58 pm
Forum: General
Topic: Water in the METAL 2SHPN
Replies: 10
Views: 2092

Re: Water in the METAL 2SHPN

You need to use self bonding tape for all types of coax connectors!
and finnish it with black tape

Outdoor FTP cable is also recommended ....
by Petzl
Sat Sep 13, 2014 2:44 pm
Forum: General
Topic: Routerboard RB2011 Fiber link
Replies: 4
Views: 1163

Re: Routerboard RB2011 Fiber link

Do you know the basics of fiber ?

single mode / multimode , max distance, are the fibers crossed ?
Does it work in a other device ?

If i try somethong new i buy at least 1 or 2 spares ....

Till now i have no problems with 2011 and SFP modules (i use mikrotik and opton)
by Petzl
Fri Sep 12, 2014 12:49 am
Forum: General
Topic: Whitelist dynamic IP
Replies: 4
Views: 879

Re: Whitelist dynamic IP

you need a fixed ip for this ... or they must whitelist all the isp's ranges....
by Petzl
Wed Sep 10, 2014 9:51 am
Forum: RouterBOARD hardware
Topic: Do you like default config of Omnitik and Omnitik UP? (poll)
Replies: 11
Views: 1915

Re: Do you like default config of Omnitik and Omnitik UP? (p

There is a firewall config on port 1 !

If you keep the box you can login over wifi .... (key on box)
by Petzl
Sat Sep 06, 2014 1:52 am
Forum: RouterBOARD hardware
Topic: CCR Lock out
Replies: 7
Views: 1553

Re: CCR Lock out

There is / was a bug when ccr can not access the data storage , and then there is no password for logging in.
by Petzl
Mon Sep 01, 2014 9:11 am
Forum: RouterBOARD hardware
Topic: The mystery of the ethernet - Solved
Replies: 13
Views: 3092

Re: The mystery of the ethernet

Are those transmitting radio and tv antenna's ?

and with how much power ?
by Petzl
Thu Aug 28, 2014 12:48 am
Forum: RouterBOARD hardware
Topic: 60KM SFP
Replies: 8
Views: 2391

Re: 60KM SFP

CDR has some up to 100 km
by Petzl
Tue Aug 26, 2014 9:45 am
Forum: General
Topic: Ports Going Dead with UBNT Radios
Replies: 9
Views: 2149

Re: Ports Going Dead with UBNT Radios

Only reason here for broken ethernet interfaces is lightning, and then only in combination with omnitiks ( no grounding ) ... with 793 / 2011 / CRS / CCR no problerms at all (Metal boxes, grounded)

500 sites, + 3000 devices
by Petzl
Fri Aug 22, 2014 8:39 am
Forum: General
Topic: Ports Going Dead with UBNT Radios
Replies: 9
Views: 2149

Re: Ports Going Dead with UBNT Radios

are those FM radio towers ?
by Petzl
Wed Aug 13, 2014 10:39 pm
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 51271

Re: New hardware - mAP

http://www.interprojekt.com.pl/mikrotik ... -1644.html

27.64 euro, introduction price, lets hope it will get cheaper in time ....
by Petzl
Fri Aug 08, 2014 1:29 am
Forum: RouterBOARD hardware
Topic: New product CRS 109
Replies: 48
Views: 15320

Re: New product CRS 109

I'm more intrested in a entry model with 2 or more SFP modules... since you now can buy 200 meter fiber cables with connectors on it.

What about support for a USB IO module,

- intrusion dection (one or more inputs)
- Temperature monitoring
- one or more outputs
by Petzl
Thu Aug 07, 2014 12:26 pm
Forum: RouterBOARD hardware
Topic: New product CRS 109
Replies: 48
Views: 15320

New product CRS 109

http://www.cdr.pl/p3630,mikrotik-cloud-router-switch-crs109-8g-1s-2hnd-in.html CRS109 8G 1S 2HnD IN CPU Qualcomm Atheros AR9344 600MHz Memory 128MB Ethernet 8x 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X SFP One 1G Ethernet SFP cage (Mini-GBIC; SFP module not included), DDMI support. Storage...
by Petzl
Tue Jul 22, 2014 7:12 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 119942

Re: Winbox 3

and finally, why, the heck, there is no native linux winbox version? Is it a big deal to switch to multiplatform toolkit? Winbox works perfect under Wine .... I like to have a option to add a confirmation message to "Remove" and "Disable" , using keystrokes its now to easy to do something wrong ...
by Petzl
Mon Jul 21, 2014 2:48 pm
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 51271

Re: New hardware - mAP

I'm intrested to build them inside alarm systems to use them as a VPN gateway, no more messing with port forwarding and dyndns ...

so the question is : will it be cheaper than a 951 ?
by Petzl
Mon Jul 21, 2014 1:21 pm
Forum: RouterBOARD hardware
Topic: FM-Proof Routerboard
Replies: 6
Views: 1619

Re: FM-Proof Routerboard

We have like 50 FM towers in use ... - Keep some distance from the FM antenna's ! (this is the most important 3 meters is the minimum) - Use outdoor shielded cable with shielded connectors (ubnt has tough cable PRO with special shielded connectors) - use ferrites (we had a situation with a 3KW stati...
by Petzl
Sun Jul 20, 2014 2:55 am
Forum: Wireless Networking
Topic: Connect 2.4Ghz Grid Antenna to 5Ghz RB433
Replies: 20
Views: 3271

Re: Connect 2.4Ghz Grid Antenna to 5Ghz RB433

i have a 5 ubnt device connected to a 2.4 ghz rubber duck, still working after 8 years ... distance is 25 meters .... and on the other side a nanostation loco ....

now i know better and wil alway's use the better solution ... in that time 5 ghz rubberduck antenna's where not so common ...
by Petzl
Sat Jul 19, 2014 11:08 pm
Forum: General
Topic: how to disable wireless-fp and downgrade from v6.15 to v6.10
Replies: 1
Views: 473

Re: how to disable wireless-fp and downgrade from v6.15 to v

What is wrong with 6.15 , or even 6.17 ?
by Petzl
Sat Jul 19, 2014 8:28 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 119942

Re: Winbox 3

Just a reminder :

if you use wine + winbox you also need to define a default gateway if you use a fixed IP config ... if not scanning for neighbors will not work !
by Petzl
Sat Jul 19, 2014 4:27 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 119942

Re: Winbox 3

using wine sometimes it also stops responding ...

and it juist Quited when i did a wifi scan ...
by Petzl
Sat Jul 19, 2014 11:21 am
Forum: General
Topic: Ethernet interface Up\Down
Replies: 10
Views: 10941

Re: Ethernet interface Up\Down

do you use FTP cable ?
by Petzl
Thu Jul 17, 2014 7:08 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ multiple ports not linking at 1Gbps
Replies: 4
Views: 1122

Re: CCR1009-8G-1S-1S+ multiple ports not linking at 1Gbps

Also Latest Routerboard firmware ?
by Petzl
Thu Jul 17, 2014 1:13 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ Availability?
Replies: 3
Views: 885

Re: CCR1009-8G-1S-1S+ Availability?

is in stock at some distributors ...
by Petzl
Fri Jul 11, 2014 5:57 pm
Forum: RouterBOARD hardware
Topic: NetMETAL 5 (ac with SFP) - without DC in ?
Replies: 35
Views: 10236

Re: NetMETAL 5 (ac with SFP) - without DC in ?

It's better to use a ethernet cable for power than a powerplug !
by Petzl
Wed Jul 09, 2014 11:22 pm
Forum: RouterBOARD hardware
Topic: new AC products
Replies: 4
Views: 3170

new AC products

new products :

MIKROTIK NetBox5 : http://www.interprojekt.com.pl/mikrotik ... -1624.html
SXTG-5HPacD 26 and 90 degre model http://www.interprojekt.com.pl/mikrotik ... -1622.html

hope MT will update the site soon with some other new toys ... like the MAP
by Petzl
Wed Jul 09, 2014 12:40 am
Forum: RouterBOARD hardware
Topic: Powering 2 rb's
Replies: 11
Views: 1817

Re: Powering 2 rb's

@honzam... Thank you for the response but I have one of those and it still only powers one rb unless I'm doing something wrong. @Petzl... Thank you too. Do you have a link as to how to do this mod and what is needed. Sent from my LT25i using Tapatalk don.t have a direct answer for a 433 ... http://...
by Petzl
Tue Jul 08, 2014 3:33 am
Forum: RouterBOARD hardware
Topic: Powering 2 rb's
Replies: 11
Views: 1817

Re: Powering 2 rb's

just do POE mod on the board , then you can send the incomming power to the next board ... we do it wit up to 8 devices on 1 board (RB493)
by Petzl
Mon Jun 30, 2014 9:12 pm
Forum: General
Topic: Short power cuts make routers reset!
Replies: 17
Views: 2576

Re: Short power cuts make routers reset!

We never have problems with reset, we always use 24V UPS powersupply's
by Petzl
Sat Jun 28, 2014 8:04 pm
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 29066

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error

is there other RF equipment is on the same site ?

What type of cable used ?
by Petzl
Wed Jun 25, 2014 12:27 am
Forum: RouterBOARD hardware
Topic: Request: DC Lugs on integrated units
Replies: 5
Views: 1629

Re: Request: DC Lugs on integrated units

something like powerpoles : http://www.powerwerx.com/anderson-powerpoles/ it's cheaper with this : http://thumbs2.ebaystatic.com/m/mvclV4nn_8hH9dcyXG8fQnA/140.jpg We now mod all our RB493 boards to have poe out on the 8 ethernet ports, the problem is that we take te power from the power connector, t...
by Petzl
Sun Jun 22, 2014 12:50 am
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3344

Re: 3D Secure + hotspot = no sale

I also have problems with 3dsecure.net wen using iceweasel (firefox) , when i use chrome it works fine ... .
Maybe the problems are releated ?
by Petzl
Wed Jun 18, 2014 11:04 pm
Forum: RouterBOARD hardware
Topic: Wish - RB2011UiAS-2HnD-RM ?
Replies: 25
Views: 9444

Re: Wish - RB2011UiAS-2HnD-RM ?

It better an cheaper to put a 951UI (dual chain wifi) on top of the rack and power it from ether 10 ....

I don't get the point of placing wifi inside a rack .... or work with coax cables ....
by Petzl
Tue Jun 10, 2014 2:04 pm
Forum: General
Topic: how to prevent routerboard devices from reset to factory def
Replies: 1
Views: 502

Re: how to prevent routerboard devices from reset to factory

- System - Routerboard - settings , disable jumper reset - Put a non removable sticker on it - paint your logo on it - mount them higher - script that sends you information (ident + external ip), if it gets a ip on the ethernet side (also with vpn to investigate the thiefs network) - watchdog with s...
by Petzl
Mon Jun 09, 2014 11:58 am
Forum: RouterBOARD hardware
Topic: poe out on poert 4 omnitik
Replies: 2
Views: 856

Re: poe out on poert 4 omnitik

strange that 3 is red, and not 4 , reset configuration is maybe a solution for your problem ....

well i allways solder the omnitiks inside for poe out ....
by Petzl
Tue Jun 03, 2014 1:17 am
Forum: RouterBOARD hardware
Topic: RB2011UiAS-2HnD-IN USB not delivering 5v 500ma
Replies: 10
Views: 3218

Re: RB2011UiAS-2HnD-IN USB not delivering 5v 500ma

running on 12 or 24v volts ?
by Petzl
Mon Jun 02, 2014 10:11 pm
Forum: Wireless Networking
Topic: 200+ megabit over 55 kilometers
Replies: 9
Views: 2532

Re: 200+ megabit over 55 kilometers

here in Belgium 5.8 is a licenced hamradio band (5650 -5850)
by Petzl
Sun Jun 01, 2014 9:51 am
Forum: RouterBOARD hardware
Topic: Mikrotik POE - big problem, why you dont make similar like U
Replies: 7
Views: 2036

Re: Mikrotik POE - big problem, why you dont make similar li

We do have a couple of 100 ubnt spares so we use the ubnt power supply's, in 10 years i never had a broken ubnt power supply, ans they stay stable even if you overload them. i also had some problems with the MT 24V 0.38A power supply's and some poe cables. Inside this psu i did found some crushed ca...
by Petzl
Wed May 28, 2014 8:06 pm
Forum: RouterBOARD hardware
Topic: Strange thing with 2011
Replies: 2
Views: 946

Re: Strange thing with 2011

I had this also once, afther upgrading ROS + firmware this was ok
by Petzl
Wed May 28, 2014 8:03 pm
Forum: General
Topic: Winbox + Wine = Black Borders
Replies: 20
Views: 9529

Re: Winbox + Wine = Black Borders

Do you all know that you need to put a gateway in your fixed ip configuration in order to use mac discovery in wine ?

if you use dhcp there is no problem
by Petzl
Mon May 19, 2014 9:13 am
Forum: General
Topic: Is it possible ...
Replies: 3
Views: 526

Re: Is it possible ...

you can use vlans , eoip tunnels .... never used the RB260, i can recommend the RB2011
by Petzl
Sun May 18, 2014 11:54 pm
Forum: RouterBOARD hardware
Topic: RB 750UP Gigabit Version
Replies: 19
Views: 5158

Re: RB 750UP Gigabit Version

8 ports is to much for a standard powerplug ...

You need something like this :

Image

Image
by Petzl
Sun May 18, 2014 7:32 pm
Forum: General
Topic: routerboard 750up with wifi!
Replies: 1
Views: 906

Re: routerboard 750up with wifi!

i always use a soldering iron, also for the 951 ...
by Petzl
Thu May 15, 2014 8:19 pm
Forum: RouterBOARD hardware
Topic: Routerboard 750UP POE control
Replies: 6
Views: 1494

Re: Routerboard 750UP POE control

well the tests we did where all with a omnitik UPA

2 days ago i did a test with a 951UI, wich was more positve
by Petzl
Wed May 14, 2014 12:12 am
Forum: RouterBOARD hardware
Topic: Routerboard 750UP POE control
Replies: 6
Views: 1494

Re: Routerboard 750UP POE control

well we use Ubiquity for links, and until now all our tests failed. the RB951 is also less sensitive than a omnitik when it comes to powering devices. We never need to cycle power, we do this at the moment only for the unify for powering a 48V unify i made the "RB951UI Super POE" pictures : https://...
by Petzl
Wed May 14, 2014 12:03 am
Forum: RouterBOARD hardware
Topic: OmniTik UPA: Observations & Issues
Replies: 67
Views: 21687

Re: OmniTik UPA: Observations & Issues

What happens if you set power manual on ?
by Petzl
Sat May 10, 2014 12:01 am
Forum: RouterBOARD hardware
Topic: Routerboard 750UP POE control
Replies: 6
Views: 1494

Re: Routerboard 750UP POE control

Just use a soldering iron .... works better than mikrotiks poe out that is not working at all ...
by Petzl
Fri Apr 18, 2014 12:36 am
Forum: RouterBOARD hardware
Topic: Can a 260GSP power a BaseBox 2?
Replies: 13
Views: 2990

Re: Can a 260GSP power a BaseBox 2?

We never had something working on a POE out port of mikrotik equipment

we de several tests on the field with omnitik poe and yesterday a we did try a groove on a RB2011, they all just go on an off a gain...
by Petzl
Wed Apr 16, 2014 9:20 pm
Forum: Wireless Networking
Topic: Interference from GSM sector antennas
Replies: 4
Views: 1050

Re: Interference from GSM sector antennas

We do sometimes have problems with GSM towers and powerfull FM stations ... do not put your antenna's in front of the cellular antennas .... 2.4 is a problem with GSM towers, evan at 100 meters distance . 5 ghz only if you are realy close <5 meters With FM towers we sometimes need to use Toughcable ...
by Petzl
Sun Apr 13, 2014 1:15 pm
Forum: General
Topic: [WINBOX] MultiTab
Replies: 19
Views: 3630

Re: [WINBOX] MultiTab

If you use winbox on linux with a fixed IP config you need also to put in a gateway ... if not you can't use mac connect ...
by Petzl
Sun Mar 30, 2014 3:56 pm
Forum: Wireless Networking
Topic: Win8 can't connect to RB2011 wifi
Replies: 21
Views: 13192

Re: Win8 can't connect to RB2011 wifi

I have at work also a problem with a new dell laptop with a intel wirless chipset, it doen't see the 2nd SSID (the first SSID is also a virtual SSID)
by Petzl
Sat Mar 15, 2014 7:31 pm
Forum: General
Topic: Wide Area Networking
Replies: 4
Views: 1518

Re: Wide Area Networking

you can also put a VPN server in a data centre for more performance ....
by Petzl
Thu Mar 13, 2014 9:13 pm
Forum: General
Topic: Belgium WISP / EIRP limitations
Replies: 15
Views: 3047

Re: Belgium WISP / EIRP limitations

Thanks leovinci81, this is the list from official instances with all used frequenties. Also ISM band http://www.bipt.be/nl/operatoren/radio/frequentiebeheer/frequentieplan/i-tabel Pilsken, Thx, I based my question on that reference guide :-)) Hey, I'm wondering if there is no Mikrotik community in ...
by Petzl
Mon Mar 10, 2014 3:45 pm
Forum: General
Topic: Why no WISPS available in Belgium ?
Replies: 1
Views: 496

Re: Why no WISPS available in Belgium ?

There is a free wisp in belgium;

http://www.wirelessbelgium.be
by Petzl
Fri Feb 28, 2014 12:09 am
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 53058

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible

I did see in a presentation a GPON or GEPON SFP module on the last MUM
by Petzl
Wed Feb 26, 2014 6:27 pm
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 51271

Re: New hardware - mAP

Does it run the normal routerOS ?

If YES it wil be the perfect VPN device !
by Petzl
Tue Feb 25, 2014 9:36 pm
Forum: Wireless Networking
Topic: Terrible speed on AP
Replies: 11
Views: 1688

Re: Terrible speed on AP

5500 is to close to 5520

Also RF schielding does help!
by Petzl
Mon Feb 17, 2014 1:47 am
Forum: Wireless Networking
Topic: Omnitik problems
Replies: 10
Views: 3471

Re: Omnitik problems

We have 100 stable omnitiks in the field

only the one at my home has wireless that stops working.

If you have TX - RX problems , then you have to check the antenna connections, i had one with a short cirquit and one with a missing solder point ...
by Petzl
Sat Feb 15, 2014 8:54 am
Forum: General
Topic: Glassfiber speed
Replies: 2
Views: 607

Re: Glassfiber speed

for 2011 : 600 mbit if you go over the cpu ....
by Petzl
Sat Feb 08, 2014 10:03 pm
Forum: RouterBOARD hardware
Topic: OmniTik UPA: Observations & Issues
Replies: 67
Views: 21687

Re: OmniTik UPA: Observations & Issues

That said, when should we expect a detailed photo of the best way to connect the necessary pins? 8) Of course this is not the best way, but it works: IMG_0501_cr_res.jpg There are much simpler solutions ..... http://internet.ha.cz/fotoarchiv/2012/reseni_rozsireni_napajeni_poe_omnitik_02.jpg
by Petzl
Tue Feb 04, 2014 6:48 pm
Forum: General
Topic: is there anyway to know password mistake?
Replies: 20
Views: 3249

Re: is there anyway to know password mistake?

Thanks , it's very helpful

I need SSH service - and I don't always from witch computer I will try to enter it.(this is why I don't block the IP )

Then use a other port than de default port
by Petzl
Mon Feb 03, 2014 11:28 pm
Forum: RouterBOARD hardware
Topic: Looking for Single Radio with SFP Cage
Replies: 6
Views: 1487

Re: Looking for Single Radio with SFP Cage

comming soon :

http://www.mikrotik-bg.net/topic/6464-% ... -mikrotik/

And for fiber to the house something like the RB2011UiAS-2HnD-IN
by Petzl
Sun Feb 02, 2014 2:25 pm
Forum: RouterBOARD hardware
Topic: OmniTik UPA: Observations & Issues
Replies: 67
Views: 21687

Re: OmniTik UPA: Observations & Issues

I realised that poe out works without any problems only and only if I take the non-poe out device and solder the wires on pcb myself. Of course an appropriate power adapter is necessary to power more devices. Odesláno z mého N1 pomocí Tapatalk We also use the not POE omnitik and a soldering iron, o...
by Petzl
Sun Feb 02, 2014 2:19 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 59155

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Feel free to join this event on facebook :
https://www.facebook.com/events/763389400355187/
by Petzl
Mon Jan 06, 2014 11:38 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 22992

Re: What's new in 6.8rc1

I did a upgrade + reset on my CRS

Now is all working fine (before only 10mbit if one of the devices was 10 mbit)
Also did a board firmware upgrade
by Petzl
Wed Jan 01, 2014 7:19 pm
Forum: RouterBOARD hardware
Topic: RB751G-2HnD Transmit Power Level
Replies: 2
Views: 3219

Re: RB751G-2HnD Transmit Power Level

most of the 75x devices will slow down if the power is to high

i set it to 20dbm on all rates
by Petzl
Fri Dec 27, 2013 11:39 pm
Forum: Wireless Networking
Topic: RF shielding does it help?
Replies: 21
Views: 4530

Re: RF shielding does it help?

I have a link near a Weather radar, if the radar is turned of i get a troughput of 60/45 Mbit over 3 hops in total, with the radar on it's more like 25/8 Mbit , now six months ago i installed some cheap RF shielding from antenny24 and performance went up to 45/25 Mbit, so yes it does help.
by Petzl
Fri Dec 27, 2013 11:31 am
Forum: Beginner Basics
Topic: Ubiquiti behind Mikrotik
Replies: 14
Views: 2790

Re: Ubiquiti behind Mikrotik

We use WDS mode for ubiquity, if you do client and ap mode , the device wil do some sort of Natting ...
by Petzl
Thu Dec 26, 2013 11:12 pm
Forum: RouterBOARD hardware
Topic: Groove 5Hn Dead Ether Port
Replies: 1
Views: 888

Re: Groove 5Hn Dead Ether Port

We have a lot omnitiks that stop working after a lightning storm.

with the 493 in a metal box we never had this problem.

It's strange since everyting on it is made from plastic. and we use shielded cables.
by Petzl
Sat Dec 14, 2013 10:57 am
Forum: RouterBOARD hardware
Topic: Gigabit POE injector on RB951-2n possible?
Replies: 1
Views: 1165

Re: Gigabit POE injector on RB951-2n possible?

I mostly use the Toughswitch from Ubiquity in these cases.

it's a verry good device, only getting a little to hot for what it does ...
by Petzl
Wed Dec 04, 2013 10:29 pm
Forum: RouterBOARD hardware
Topic: Voltage monitor, temperature and CPU FAN on RB493 (OpenWRT)
Replies: 12
Views: 4341

Re: Voltage monitor, temperature and CPU FAN on RB493 (OpenW

Sorry, we only use the 493AH , since we do a passive POE mod on the board ... and this model doesn't have a voltage monitor ... The 493 does not have voltage monitoring , you can use this module : http://tandem.ck.ua/ups_mtm-eng.php [admin@MikroTik] /system health> /system routerboard print routerbo...
by Petzl
Tue Dec 03, 2013 10:35 pm
Forum: RouterBOARD hardware
Topic: Voltage monitor, temperature and CPU FAN on RB493 (OpenWRT)
Replies: 12
Views: 4341

Re: Voltage monitor, temperature and CPU FAN on RB493 (OpenW

The 493 does not have voltage monitoring , you can use this module : http://tandem.ck.ua/ups_mtm-eng.php
by Petzl
Tue Nov 26, 2013 10:55 pm
Forum: Wireless Networking
Topic: Mikrotik WISPs: Where?
Replies: 95
Views: 47163

Re: Mikrotik WISPs: Where?

Belgium,

Wirelessbelgium, covering mostly the dutch part of belgium
http://www.wirelessbelgie.be
by Petzl
Tue Nov 26, 2013 1:12 am
Forum: RouterBOARD hardware
Topic: Internet stops working on certain IP addresses
Replies: 2
Views: 726

Re: Internet stops working on certain IP addresses

i do have sometimes strange problems when i get double ip ranges from bgp .... then i need to add a bgp filter ...
by Petzl
Sat Nov 09, 2013 9:40 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 72663

Re: RouterOS v6.6 released

Scheduler Bug also not fixed in 6.6

http://forum.mikrotik.com/viewtopic.php?f=2&t=77876

Note this is caused by different system language than english
by Petzl
Sat Nov 09, 2013 9:22 pm
Forum: RouterBOARD hardware
Topic: GrooveA 52HPn Help Plz
Replies: 2
Views: 990

Re: GrooveA 52HPn Help Plz

You should never use repeaters, use 2 devices then ...
by Petzl
Tue Oct 15, 2013 11:44 pm
Forum: General
Topic: R.OS 6.4 Scheduler bug (caused by system language)
Replies: 3
Views: 1153

Re: R.OS 6.4 Scheduler october bug

It seems the error is caused by my system language ... before it was english and now dutch.

also with other months it causes errors ...
by Petzl
Tue Oct 15, 2013 10:12 pm
Forum: General
Topic: R.OS 6.4 Scheduler bug (caused by system language)
Replies: 3
Views: 1153

R.OS 6.4 Scheduler bug (caused by system language)

If i want to change the scheduler this month i get a error message
scheduler.png
It shows "okt" when you open it, now when you need to set a new time you also must change "okt" to "oct"
scheduler2.png
by Petzl
Sun Oct 13, 2013 11:54 pm
Forum: RouterBOARD hardware
Topic: Omnitik
Replies: 20
Views: 5461

Re: Omnitik

Just one reply to MT about the omnitik

5% of the omnitiks have problems on the antenna's solder points.

- Short circuits (signal and ground)
- Ground or signal not connected

Also in default / and with no config all the HT's are not activted (can this be changed ?)
by Petzl
Sun Oct 13, 2013 11:45 pm
Forum: RouterBOARD hardware
Topic: Omnitik
Replies: 20
Views: 5461

Re: Omnitik

The omnitik is a great antenna ... we use them as a main node router, the 4 extra ports are used to connect other devices. We prefer using the sheaper omnitik because you can do a POE mod on the omnitik. We don't like to use the omnitik UPA since it has troubles powering other devices. Last week i d...
by Petzl
Sat Sep 21, 2013 2:51 pm
Forum: RouterBOARD hardware
Topic: Omnitik ESD protection
Replies: 2
Views: 863

Re: Omnitik ESD protection

We always use outdoor FTP cable with shielded connectors ... we also use shielded POE inserters and the other side is mostly a 951. How to ground the omnitik on the tower? We also can use POE injectors with ESD protection and with a good grounding solution ... I will look for a better Poe injector t...
by Petzl
Sat Sep 21, 2013 1:19 pm
Forum: RouterBOARD hardware
Topic: GrooveA 52HPn now with 2.4 ghz antenna ?
Replies: 12
Views: 3487

Re: GrooveA 52HPn now with 2.4 ghz antenna ?

Can you include them permanently or make it a different order code ?

our last order didn't include those nice antenna's :(
by Petzl
Mon Sep 16, 2013 1:55 pm
Forum: RouterBOARD hardware
Topic: Omnitik ESD protection
Replies: 2
Views: 863

Omnitik ESD protection

Before we always used RB493 in metal cases, now we use for smaller sites the omnitik. With the omnitik the port with cable going to the bottom of the tower goes broken more frequenly than like with the RB493. (Ether link is up, 100mbit , only no data comming true, even with no cable connected i can ...
by Petzl
Thu Sep 05, 2013 6:07 pm
Forum: RouterBOARD hardware
Topic: GrooveA 52HPn now with 2.4 ghz antenna ?
Replies: 12
Views: 3487

Re: GrooveA 52HPn now with 2.4 ghz antenna ?

a Picture of the antenna in action :)
by Petzl
Mon Sep 02, 2013 12:33 am
Forum: The Dude
Topic: Dude alternatives
Replies: 14
Views: 11690

Re: Dude alternatives

Hostmonitor from KS soft

http://www.ks-soft.net/hostmon.eng/
by Petzl
Sun Sep 01, 2013 7:24 pm
Forum: RouterBOARD hardware
Topic: GrooveA 52HPn now with 2.4 ghz antenna ?
Replies: 12
Views: 3487

Re: GrooveA 52HPn now with 2.4 ghz antenna ?

The antenna was a small +- 22 cm antanna of good quality with a N female connector.

I will take a picture of it.
by Petzl
Sun Sep 01, 2013 2:52 pm
Forum: RouterBOARD hardware
Topic: Higher current power supply for longer lines
Replies: 12
Views: 2473

Re: Higher current power supply for longer lines

Do you use AWG24 cable ?

Patchcables are only AWG26 and with 30 meters of cable you will get problems..
by Petzl
Sun Sep 01, 2013 12:40 am
Forum: RouterBOARD hardware
Topic: GrooveA 52HPn now with 2.4 ghz antenna ?
Replies: 12
Views: 3487

GrooveA 52HPn now with 2.4 ghz antenna ?

We did order 10 GrooveA 52HPn , and we did notice there was a nice 2.4 ghz antenna supplied with it .

When will MT update this on the site ?
by Petzl
Fri Aug 30, 2013 12:37 am
Forum: Wireless Networking
Topic: Fiber interface with 5ghz solution?
Replies: 11
Views: 2371

Re: Fiber interface with 5ghz solution?

use better cable and schielded plugs

Tough cable carrier or some other outdoor SFTP cable, normal FTP cable can aslo fail.

I had once a FTP cable with ferrites arround it that melted into the cable beqause of the radiation.
by Petzl
Fri Aug 30, 2013 12:28 am
Forum: General
Topic: Admins please tell Can i use 2-3 km copper cable as antenna
Replies: 13
Views: 2107

Re: Admins please tell Can i use 2-3 km copper cable as ante

Hi
it's 12:!2 am now and i was thinking can we user a 2-3km length single copper wire 24awg (not pair) to directly connect twi 7115hn antenna port and both the device will work at a distance of 2 km??

can admins/wifi engg confirm this??

Thanks
will not work on 2.4 ghz ....
by Petzl
Fri Aug 30, 2013 12:25 am
Forum: RouterBOARD hardware
Topic: Higher current power supply for longer lines
Replies: 12
Views: 2473

Re: Higher current power supply for longer lines

Use a PSU with batteries , less drop on the psu side and also a higher voltage of 27.6V
by Petzl
Tue Aug 27, 2013 10:31 pm
Forum: RouterBOARD hardware
Topic: new hardware request 8 port with poe and high-end cpu
Replies: 2
Views: 768

Re: new hardware request 8 port with poe and high-end cpu

RB493 With POE MOD ...

Don't know if you can do a POE mod on a 493G