Community discussions

Search found 60 matches

by bclewl1ns
Thu Jun 20, 2019 10:08 pm
Forum: Announcements
Topic: Winbox v3.18 released!
Replies: 49
Views: 72089

Re: Winbox v3.18 released!

How about 64 bit. Windows, Mac, Most linux distros are all stopping support for 32 bit programs. I really like the IPAD inbox if you bring terminal to it. I hope you compile it for MacOS now that they offer the ability to compile iPad app on MacOS
by bclewl1ns
Wed May 17, 2017 8:25 pm
Forum: RouterBOARD hardware
Topic: CCR1072-1G-8S+ memory
Replies: 6
Views: 1142

Re: CCR1072-1G-8S+ memory

We are waiting on the 6th router to show up today. I can agree on a bad batch. That is an acceptable answer however This is your flag ship product. While I am going to give the 6th router a shot and pray it shows up with 16 gig of memory as I need the extra SFP+ ports. IF it does not I will have los...
by bclewl1ns
Tue May 16, 2017 9:18 pm
Forum: RouterBOARD hardware
Topic: CCR1072-1G-8S+ memory
Replies: 6
Views: 1142

Re: CCR1072-1G-8S+ memory

As an update, Mikrotik has completely failed with this. I have received 5 different Routers of all 5 only 1 shows the correct memory. 3 showed only 8 Gig and 1 showed 12. From my position that is an 80% Failure Rate. I have not received any help from Mikrotik on this and they just refer me back to m...
by bclewl1ns
Thu May 11, 2017 2:13 am
Forum: RouterBOARD hardware
Topic: CCR1072-1G-8S+ memory
Replies: 6
Views: 1142

Re: CCR1072-1G-8S+ memory

FYI. a little more information I did reset the router via WinBox and a hard reset. Still the same limit of 8 Gig of Memory.

Maybe time to go back to cisco.
by bclewl1ns
Thu May 11, 2017 2:09 am
Forum: RouterBOARD hardware
Topic: CCR1072-1G-8S+ memory
Replies: 6
Views: 1142

CCR1072-1G-8S+ memory

I recently purchased 2 CCR1072 from my vendor. Both that I recieved only showed 8 Gig of memory instead of the advertised 16 Gig. My vendor did RMA both Routers. the first replacement i received showed the advertised 16 Gig of memory however the 2nd one i received just today only shows 8 Gig of memo...
by bclewl1ns
Sun Mar 05, 2017 12:41 am
Forum: Announcements
Topic: The Dude, v6.38 [current] release.
Replies: 77
Views: 23843

Re: The Dude, v6.38 [current] release.

you need to put them into your dude/files directory then the system will see them. I have no idea why they have made this part of the system so difficult
by bclewl1ns
Thu Mar 02, 2017 10:16 pm
Forum: Announcements
Topic: v6.38.3 [current]
Replies: 63
Views: 14731

Re: v6.38.3 [current]

And Posting this again one more time as it is specific to 3.38.3 So i am running Dude 6.38.3 I spend 12 hours building out our entire network to wake up the next morning and having it all Gone. So I rebuilt it again. about 200 Devices running on a CCR1016. after I got the network completely done I w...
by bclewl1ns
Thu Mar 02, 2017 9:47 pm
Forum: Announcements
Topic: The Dude, v6.38 [current] release.
Replies: 77
Views: 23843

Re: The Dude, v6.38 [current] release.

I posted this in another string but i figured that i should try here since there is posts about backups So i am running Dude 6.38.3 I spend 12 hours building out our entire network to wake up the next morning and having it all Gone. So I rebuilt it again. about 200 Devices running on a CCR1016. afte...
by bclewl1ns
Thu Mar 02, 2017 9:32 pm
Forum: The Dude
Topic: dude, critical queued bytes for write to db
Replies: 38
Views: 6266

Re: dude, critical queued bytes for write to db

So i am running Dude 6.38.3 I spend 12 hours building out our entire network to wake up the next morning and having it all Gone. So I rebuilt it again. about 200 Devices running on a CCR1016. after I got the network completely done I went to back it up so that if i lost the data again i could restor...
by bclewl1ns
Wed Jul 13, 2016 12:28 am
Forum: The Dude
Topic: The Dude, v6.36rc test builds.
Replies: 112
Views: 20454

Re: The Dude, v6.36rc test builds.

Looking good so far,  Thanks for bringing it back.  

Two feature request:

Upgrade device firmware via Dude 
Be able to upload .dpk files to devices via Dude
by bclewl1ns
Mon Feb 15, 2016 2:45 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105874

Re: v6.35rc [release candidate] is released, new wireless package!

More info. I finally was able to successfully mac telnet into one of the devices. However the command interface bridge print show nothing but the interface bridge port print showed the following screen2.png why did the upgrade change my interface names and delete my bridge. After this i removed the ...
by bclewl1ns
Mon Feb 15, 2016 2:26 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105874

Re: v6.35rc [release candidate] is released, new wireless package!

so i uploaded the new Rc8 to my test system upgraded from 6.3.3.3 to 6.35rc8 upon reboot i no longer have have access to either system via IP. it took them both 2 min to reboot. I do see their mac address's in my network neighbor's list and can connect to them via mac tenet but upon connecting to th...
by bclewl1ns
Wed Jan 27, 2016 11:31 pm
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 201
Views: 43426

Re: 6.34 release candidate version topic!

So after a while running on 6.33.5 I upgraded to 6.34rc45 It took the router almost 5 min to reboot. When it did I am right back to were i started. The router takes about 2 min to let me log in. It takes the file list about 5 min before it shows any files. I have lost the ability to create a sup fil...
by bclewl1ns
Wed Jan 27, 2016 10:58 pm
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 201
Views: 43426

Re: 6.34 release candidate version topic!

It does seam that downgrading the router to 6.33.5 fixed the reboot and lockup problem.
by bclewl1ns
Wed Jan 27, 2016 10:56 pm
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 201
Views: 43426

Re: 6.34 release candidate version topic!

A little more info. If I turn off the watchdog timer. the system loses the ability to reboot remotely. I have to manually power off the router.
by bclewl1ns
Wed Jan 27, 2016 10:40 pm
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 201
Views: 43426

Re: 6.34 release candidate version topic!

so I have an issue that started with RC41. I have a CCR1036-12G-EM after the RC41 upgrade. The router loses the ability to show files, resources and Authentication to the router takes about 3 min. I have reset the router, uninstalled Dude and rebuilt from scratch to have the same thing happen. I was...
by bclewl1ns
Sat Jan 09, 2016 8:14 am
Forum: The Dude
Topic: The Dude and RoS6.25+
Replies: 7
Views: 4499

Re: The Dude and RoS6.25+

Any news regarding this issue?
+1
by bclewl1ns
Tue Oct 20, 2015 9:51 am
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9450

Re: What is wrong with nv2?

I have complained about NV2 problems as much as anyone. I have notices however some improvement when using the wireless-cm package. You need to disable it from using cap and you push button authentication but i am seeing more stability and better tcp speeds. However The biggest issue i still see is ...
by bclewl1ns
Mon Sep 28, 2015 4:18 am
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9450

Re: What is wrong with nv2?

While it is interesting. And I know we all have our own opinions I have set up a basic lab to test what i am seeing on my network. I have setup a 4 nMAPs one as a AP and 3 CPE's I used ROS6.33rc15 with the CM2 package as Mikrotik Support have told me that is now the standard wireless package to use....
by bclewl1ns
Sat Sep 26, 2015 12:22 am
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9450

Re: What is wrong with nv2?

I agree. I am tired of arguing as well. I actually moved parts of my network over to 802.11 last night. I actually got calls from customers telling me their service seamed allot better today then it has over the last few months. More telling is the call i got from one of my financial institutes that...
by bclewl1ns
Fri Sep 25, 2015 12:29 am
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9450

Re: What is wrong with nv2?

Overall NV2 is very stable and yes its far from perfect, I have found NV2 to be more stable in noisy environments than 802.11, with Mikrotik as everything is done in software, CPU is king as faster CPU speed gives better performance? I remove any packages not required and in a lot of cases default ...
by bclewl1ns
Thu Sep 24, 2015 10:26 pm
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9450

Re: What is wrong with nv2?

I have submitted a few tickets with the problems of NV2. The most recent was replied with "We are aware of the problems but we are fixing 802.11 first" I actually moved all of my point to point ac links to 802.11 (Can you even imagine it) and i was surprised to see that my throughput on tcp traffic ...
by bclewl1ns
Thu Sep 24, 2015 10:56 am
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37371

Re: v6.33rc release candidate

carrierlost, the single TCP optimization is only for the 802.11 wireless protocol and not for the Nv2. Hi Uldis, why do you choose to improve 802.11 rather than NV2? NV2 is more important for ISP due to PTMP implementations, please put this in the priority list. yes. +1 IF this is the case then mik...
by bclewl1ns
Thu Sep 24, 2015 12:28 am
Forum: Beginner Basics
Topic: WISP Wireless AP. Bridge or Route
Replies: 1
Views: 1383

Re: WISP Wireless AP. Bridge or Route

Also on a side note. I want to use VRRP to provide hardware redundancy on the aggregate end. so the loopback ip on the router would be the VRRP ip address on each router. So there would be two routers as the core each with the LDP ip being the VRRP ip address but different ip's say 10.0.0.1/25 for r...
by bclewl1ns
Wed Sep 23, 2015 11:47 pm
Forum: Beginner Basics
Topic: WISP Wireless AP. Bridge or Route
Replies: 1
Views: 1383

WISP Wireless AP. Bridge or Route

I am sure this will come across as a complete newbie question. However I am not bringing it up to see if it will work but if it might address some expansion issues we are anticipating as well as to see if we can get some TCP speed increases and less packet loss on NV2 links. What i am looking at doi...
by bclewl1ns
Sun Sep 06, 2015 7:21 am
Forum: Wireless Networking
Topic: nv2 multilink problem
Replies: 94
Views: 27435

Re: nv2 multilink problem

I MAY HAVE SOME HELP. The wireless-fp package is now the legacy package for Mikrotik. I moved to the new wireless-cm package and i have to admit that the TCP throughput is much better. The caveat is however you have to be using router os versions 6.33rc3 minimum There is a changelog entry claiming ...
by bclewl1ns
Sun Sep 06, 2015 7:17 am
Forum: Wireless Networking
Topic: nv2 multilink problem
Replies: 94
Views: 27435

Re: nv2 multilink problem

The wireless-fp package is now the legacy package for Mikrotik. I moved to the new wireless-cm package and i have to admit that the TCP throughput is much better. The caveat is however you have to be using router os versions 6.33rc3 minimum. Are you sure about this? Is the wireless cm not only rela...
by bclewl1ns
Sat Sep 05, 2015 11:48 pm
Forum: Wireless Networking
Topic: nv2 multilink problem
Replies: 94
Views: 27435

Re: nv2 multilink problem

I MAY HAVE SOME HELP. The wireless-fp package is now the legacy package for Mikrotik. I moved to the new wireless-cm package and i have to admit that the TCP throughput is much better. The caveat is however you have to be using router os versions 6.33rc3 minimum. As far as the last post I have also ...
by bclewl1ns
Thu Sep 03, 2015 9:18 pm
Forum: Wireless Networking
Topic: nv2 multilink problem
Replies: 94
Views: 27435

Re: nv2 multilink problem

So after multiple designed I have found a common problem. Any link i have running in NV2 can not go across another NV2 Link. I actually went out and purchased a Ubiquity Airfiber 24 HD to replace the backhaul from one of our locations. I then backed it up with a NetMetal PTP running NV2. The clients...
by bclewl1ns
Fri May 15, 2015 3:25 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

I am well aware of the increased self-interference . We plan sites very carefully to avoid this as much as possible. I also agree Nstream is allot better for PTP however it has proven to be almost useless when it comes to the new AC radios. Have yet to test, does this apply also if set in N mode? I...
by bclewl1ns
Thu May 07, 2015 12:13 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

I am well aware of the increased self-interference . We plan sites very carefully to avoid this as much as possible. I also agree Nstream is allot better for PTP however it has proven to be almost useless when it comes to the new AC radios. nstream disconnects frequently and throughput is about half...
by bclewl1ns
Wed May 06, 2015 10:10 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

1. Latency - Even using auto on the NV2 Setting latency is way to high. 2. Jitter - It is increasely getting worse on NV2 Links 3. TCP Throughput Should be more stable and better then 10% of UDP I am aware of NV2's benefits and its shortcomings. My only POINT is that instead of doing all these new ...
by bclewl1ns
Sun May 03, 2015 7:49 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

Well it looks like i touched a nerve. Look I believe that Mikrotik is a fantastic system. But I am noticing an ongoing problem with NV2 and TCP connections. And as everyone here knows TCP works in multiple streams However. When your delivering a 25 Meg Connection to a user and they get on a speedie...
by bclewl1ns
Thu Apr 30, 2015 5:52 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

Well it looks like i touched a nerve. Look I believe that Mikrotik is a fantastic system. But I am noticing an ongoing problem with NV2 and TCP connections. And as everyone here knows TCP works in multiple streams However. When your delivering a 25 Meg Connection to a user and they get on a speedies...
by bclewl1ns
Wed Apr 29, 2015 10:26 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

Hate to sound like a broken record. But we really need some fixed for TCP traffic over NV2. Any Idea when that is going to happen. Have you investigated how NV2 works?? and also how TCP works?? Try to do the test in the middle of night when your TCP connection is only traffic on the link. Then try ...
by bclewl1ns
Wed Apr 29, 2015 12:54 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

I have links using nstreme can go up to 100mbit, when switched to nv2 it can barely go 20 to 30mbits And when AC txpower will be fixed? This is even more funny going over multiple hops or/and using .ac. You've great (udp)bandwidth but the customer blames you what the sh... you're selling him. We ar...
by bclewl1ns
Wed Apr 29, 2015 12:48 am
Forum: Wireless Networking
Topic: nv2 multilink problem
Replies: 94
Views: 27435

Re: nv2 multilink problem

Still having issues on this with V6.27 I have links that used to run at 75 meg not barely getting 30. But on UDP i can test at 100. Is their any way to fine tune NV2 as i can not find anything.
by bclewl1ns
Tue Apr 28, 2015 11:37 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

Hate to sound like a broken record. But we really need some fixed for TCP traffic over NV2. Any Idea when that is going to happen. To less people urge Mikrotik to do work for this. I tried for a long time now. My only solution is to replace MT where I see this problem. I am afraid i am going to hav...
by bclewl1ns
Tue Apr 28, 2015 11:01 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

Hate to sound like a broken record. But we really need some fixed for TCP traffic over NV2. Any Idea when that is going to happen.
by bclewl1ns
Tue Apr 28, 2015 3:21 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62130

Re: RouterOS v6.28 released

Can we get some Wireless improvements to NV2 in this release.
by bclewl1ns
Tue Apr 21, 2015 12:42 am
Forum: General
Topic: v6.28 will be released this week!
Replies: 72
Views: 19045

Re: v6.28 will be released this week!

Sorry was trying to post from my cell phone. I have found that the only fix it to have the ports Auto Neg to 1 gig. The problem is I have ports that will flap from 1 Gig to 100 MEg. IN that case the problem is much worse as the customer is getting the speed they purchased but then the speed in gener...
by bclewl1ns
Mon Apr 20, 2015 10:57 pm
Forum: General
Topic: v6.28 will be released this week!
Replies: 72
Views: 19045

Re: v6.28 will be released this week!

Forgot to ask; Would setting the gigabit ports to 100Mb manual not solve the issue? Is a gigabit port set to 100/100 not acting as fastethernet port? Or is there still an issue then? I have found that the only solution is with negotiation. The problem with that is that when links or auto negotiated...
by bclewl1ns
Sun Apr 19, 2015 9:15 am
Forum: General
Topic: v6.28 will be released this week!
Replies: 72
Views: 19045

Re: v6.28 will be released this week!

With the delay of 6.28 (I prefer as others better updates not fast updates) Will any of the fixes address a universal problem we are seeing and I have seen other comment on with NV2 TCP throughput. Even with 6.28 RC20 we see the same problem On an NV2 circuit if every interface along the path is not...
by bclewl1ns
Sun Apr 19, 2015 8:59 am
Forum: Wireless Networking
Topic: NV2 speeds really bad with ver 6.27
Replies: 10
Views: 2082

Re: NV2 speeds really bad with ver 6.27

We are having the same problems with NV2 in 6.27. One thing we have found is that if every and i Do mean every interface along the path is not at 1 Gig full then speed will drop to lower then 10 Meg tcp however UDP still shows decent throughput. In our case we had a customer we were trying to delive...
by bclewl1ns
Sat Apr 18, 2015 9:46 am
Forum: General
Topic: v6.28 will be released this week!
Replies: 72
Views: 19045

Re: v6.28 will be released this week!

have their been any .ac related fixes in 6.28 ?

also is there a wireless-cm2 package for 6.28 ?

edit: romon is very interesting, i like the proxy winbox functionality with romon + new winbox. I can see how this could be quite powerful, i hope its heavily developed

+1000
+10000
by bclewl1ns
Wed Apr 15, 2015 11:45 am
Forum: Beginner Basics
Topic: BGP with two ISP's Load balanceing
Replies: 1
Views: 745

BGP with two ISP's Load balanceing

I have no idea what i am doing wrong. I have a CCR1036-12G-4S EM router. We are setting up BGP between two ISP's. ISP1 - ISP2 We are getting full routes from both ISP's. We are also advertising 4 routes. The problem is we get a OPEN error: authentication failure on the second ISP. A little back stor...
by bclewl1ns
Tue Apr 14, 2015 10:07 am
Forum: Announcements
Topic: v6.28 final RC testing
Replies: 92
Views: 31492

Re: v6.28 final RC testing

Who said anything about upgrading actual in-production SSTP servers? Pull a router out of stock and configure it as a temporary/test SSTP server. If you have no spare RouterBoards sitting around, fire up a copy of x86 RouterOS on a spare PC, or heck, even as a VM inside of VMware or something. Ther...
by bclewl1ns
Tue Apr 14, 2015 10:02 am
Forum: Announcements
Topic: v6.28 final RC testing
Replies: 92
Views: 31492

Re: v6.28 final RC testing

So i was going to upgrade my CCR's to v 6.28rc20 However i noticed that the rc20 is no longer on the filename. Does this mean 6.28 is final and launched??
by bclewl1ns
Tue Apr 14, 2015 4:21 am
Forum: Announcements
Topic: v6.28 final RC testing
Replies: 92
Views: 31492

Re: v6.28 final RC testing

I agree. I would rather time spent and get a quality release, instead of rushing and releasing garbage. That said, I would like some more communication as to how the fixes are proceeding. IE - We now have SSTP fixed, working on BGP this week, and we want to make sure OSPF is good before we release ...
by bclewl1ns
Wed Apr 08, 2015 11:57 pm
Forum: Announcements
Topic: v6.28 final RC testing
Replies: 92
Views: 31492

Re: v6.28 final RC testing

We are still seeing a big problem with Tcp traffic. When NV2 With 6.28RC20 and previous When using NV2 if any link the the chain is not negotiated at GigE full our upload TCP traffic is 10 Meg. This happens on AC and on N devices. This has created a huge problem with customer traffic. We tested in t...
by bclewl1ns
Tue Apr 07, 2015 4:58 am
Forum: Beginner Basics
Topic: GigE port Not Connecting VIA no-negotiate
Replies: 2
Views: 609

Re: GigE port Not Connecting VIA no-negotiate

Really am i the only one that is having this problem ??
by bclewl1ns
Thu Apr 02, 2015 7:44 am
Forum: Beginner Basics
Topic: Problem with TCP Traffic
Replies: 4
Views: 755

Re: Problem with TCP Traffic

There is other antenna close by how ver all are owned by our company and we have a company rule of a minimum of 30 MHz separation.
by bclewl1ns
Wed Apr 01, 2015 12:59 pm
Forum: Beginner Basics
Topic: Problem with TCP Traffic
Replies: 4
Views: 755

Re: Problem with TCP Traffic

Thanks for the reply. But it makes no sense to what i am asking about. Does anyone have any viable input on this.
by bclewl1ns
Tue Mar 31, 2015 4:46 am
Forum: Beginner Basics
Topic: GigE port Not Connecting VIA no-negotiate
Replies: 2
Views: 609

GigE port Not Connecting VIA no-negotiate

I have seen this post before as well but still unclear. So i am going to elaborate. When connecting two mikrotik devices via AutoNeg we are seeing Negotiation at 1 Gig however when we set to 1000 Full with no negation we can not establish a link. Now wait. I know the first questions What cable are y...
by bclewl1ns
Tue Mar 31, 2015 3:42 am
Forum: Beginner Basics
Topic: Problem with TCP Traffic
Replies: 4
Views: 755

Problem with TCP Traffic

I have seen information on this problem all over the Forum. However I have not experienced it until recently. I have multiple AP - Blend of RB912U N and Net Metal RB921 AC We are in the process of moving to all Net-metal RB921 AC. On all systems we are seeing a dramatic decrease in TCP traffic. Test...
by bclewl1ns
Wed Mar 18, 2015 11:11 am
Forum: Beginner Basics
Topic: Single Router with Two ISP Loopback
Replies: 2
Views: 699

Re: Single Router with Two ISP Loopback

Perfect Thanks for the help.
by bclewl1ns
Wed Mar 18, 2015 1:18 am
Forum: Beginner Basics
Topic: Single Router with Two ISP Loopback
Replies: 2
Views: 699

Single Router with Two ISP Loopback

Hello all, I have been reading thought the forums for the last few days and have not found a clear answer on this. We have been a growing provider over the last two years. Up until now we have been using a single ISP doing manual routings. However, We are not having to bring up a second ISP and need...
by bclewl1ns
Fri Oct 17, 2014 9:19 pm
Forum: Wireless Networking
Topic: R11e-5HacD not recognized into RB953GS
Replies: 3
Views: 1232

Re: R11e-5HacD not recognized into RB953GS

I agree. They need to post this since they state that the 953 card is ideal for this expansion card. On a side note. Nstream Dual does not work with AC Cards. However, Bonding seams to be giving me the speeds i wanted to accomplish. I don't know if this is of any interest to you or not but I am movi...
by bclewl1ns
Fri Oct 17, 2014 5:12 am
Forum: Wireless Networking
Topic: R11e-5HacD not recognized into RB953GS
Replies: 3
Views: 1232

Re: R11e-5HacD not recognized into RB953GS

I had the exact same problem as i am disabling the onboard card and utilizing the new AC cards for Nstream Dual. My hope is to have a symmetrical 800 Meg link. What i found is that i had to go into System --> Packages and enable the wireless-fp service then reboot the device. at that point the syste...
by bclewl1ns
Wed Dec 11, 2013 9:23 pm
Forum: General
Topic: MikroTik News October 2013 (Issue #52)
Replies: 27
Views: 11787

Re: MikroTik News October 2013 (Issue #52)

Is their any plans to add POE for these switches.

I would be very interested in using this switch in our SOHO packages. However POE is a requirement for VOIP Services.