yes I use already, but only works with Firewall filter but not on the action to addresses, mangle and NAT facilities not with DNS, NTP, and other settings
wan-ip x.x.x.x lan-ip x.x.x.x wan-net x.x.x.x lan-net x.x.x.x wan-gateway x.x.x.x time-server x.x.x.x wan-dns1 x.x.x.x ect. wan-dns2 x.x.x.x ect. Than a drop down menue on the place where you normal put you ip addresses. In this way you can put the ip addresses on one place in the firewall/router an...
De bedoeling is een wan poort voor de P2P verbinding met de provider (212.x.x.114) gateway 212.x.x.113 dan de lan voor het lokaal netwerk netwerk (10.10.10.1) gateway 10.10.10.1 de servers verbinden via het public netwerk heb 5 public ip's (212.x.x.11-212.x.x16) gateway is 212.x.x.11 en natuurlijk m...
You can do it with more AP use the same SSID, channel and WiFi password.
When you have 20% signal from the first AP then place there a new one which is connected with the switch.
So you have roaming
You can make a Mesh network
I have a unmanaged switch from the provider and must have a L3 router or firewall for the connection I hope the RB1100ahx2 can do the job. on the wan site I must put ip address 212.x.x.114 with gateway 212.x.x.113 and subnet 255.255.255.252 for the connection with the backbone. I have 5 public ip's ...
I have installed 9/2/2014 RouterOS v6.9 to my RB2011UiAS-2HnD, but dont have bootloader v3.12 firmware update,
today 10/2/2014 on a second RB2011UAS-2HnD and a rb1100ahx2 and also not the new bootloader/firmware
Need a setting in routeros and userman to change the log writing.
I have setup a hotspot and userman but when a user connect to the hotspot userman write every minut a log I want to have the possibility for some logging to change the write time to disk or usb disk.