Not what your looking for; but it may be FAR easier for you to just get a pair of RB433GL's, 2x 2t2r 802.11n miniPCI cards; and get 300mb/s from a single link... Having 3 directional links with the same source and destination is going to cause a lot of noise; and you'll be lucky to keep them stable ...

Please keep in mind that wlan1 is not in the bridge atm; and bridge1 is configured as a separate network. /ip firewall export # jul/19/2013 18:46:05 by RouterOS 6.1 # software id = SUXJ-IRX5 # /interface bridge export # jul/19/2013 18:46:42 by RouterOS 6.1 # software id = SUXJ-IRX5 # /interface brid...

Unfortunately, posting the current config will not help much.. below is a breakdown of the desired operation [Cisco 871w] Dot11Radio0.2 acts as a WiFi AP(WPA2 PSK, aes), and provides DHCP for 192.168.0.0/24 [Mikrotik RB532a] ether{1,2,3} connect to local Ethernet clients, that need to be able to bro...

Yes, I've seen that page. I found some vague references to using an EoIP Tunnel to resolve the problem; but can't see how that would help, other than excessively complicating a simple network. For the time being, I've given up on the single broadcast domain, and just setup a 2nd network on the RB532...

I have a rather complex network setup, using a bit of everything, I'm trying to get a RB532A with 2 Atheros WLAN Adapters to connect to an access point, and bridge the broadcast domain to a ether1 and the other wlan interface. The RB532A has 5 interfaces- wlan1 connects as a client, to an existing A...