Community discussions

MUM Europe 2020

Search found 30 matches

by PeterSullivan
Wed Apr 16, 2014 3:46 pm
Forum: Beginner Basics
Topic: hotspot help
Replies: 1
Views: 515

Re: hotspot help

Hi check the below link

http://wiki.mikrotik.com/wiki/Hotspot_server_setup

This will provide you step by step information.
by PeterSullivan
Wed Apr 16, 2014 3:30 pm
Forum: Wireless Networking
Topic: Omnitik Video streaming problem
Replies: 4
Views: 1116

Re: Omnitik Video streaming problem

I use 4 OmniTik on water tower (47m), one RB1100 as switch and hotspot provider, and 23 ptmp sxt lite 5 for video surveillance, with HikVison Cameras (20 x 1080p, 1 Dome, 2 720p). Each point have also one hotspot RB411AH+R52nM. The swith used for link ptmp, camera and hotspot, are one RB750UP. I us...
by PeterSullivan
Wed Apr 09, 2014 1:34 pm
Forum: Virtualization
Topic: problem in pci
Replies: 4
Views: 3147

Re: problem in pci

You board only support MiniPCI Type IIIB standard cards, please review http://i.mt.lv/routerboard/files/rb411ugA.pdf
by PeterSullivan
Wed Apr 09, 2014 1:23 pm
Forum: SwOS
Topic: Port name or description
Replies: 7
Views: 4174

Re: Port name or description

How can i change port name or add some description to port ?
+1 very useful question
by PeterSullivan
Wed Apr 09, 2014 1:19 pm
Forum: Virtualization
Topic: ros kvm optimization
Replies: 2
Views: 2440

Re: ros kvm optimization

I am not sure about the linux and unix but its work best in Windows http://www.linux-kvm.org/page/FAQ#Does_ ... P_hosts.3F
by PeterSullivan
Wed Mar 19, 2014 2:42 pm
Forum: Wireless Networking
Topic: Nokia Windows Phone not redirected to login.html
Replies: 2
Views: 1018

Re: Nokia Windows Phone not redirected to login.html

what version of Nokia your user is using, some time old version may not be supported by the routers.
by PeterSullivan
Wed Mar 19, 2014 2:25 pm
Forum: Wireless Networking
Topic: outdoor dual band sector antenna
Replies: 5
Views: 1637

Re: outdoor dual band sector antenna

My friend his using this antenna in his resort
2.4 GHz Band Wireless LAN
5 GHz Band Wireless LAN

really great for such places.
by PeterSullivan
Wed Mar 19, 2014 2:01 pm
Forum: Wireless Networking
Topic: i want hellp
Replies: 13
Views: 2499

Re: i want hellp

Hi YOUR DISH ARE DUAL POLARIZED? IF ARE DUAL POLARIZED HT must transmit and receive on both channel 0 and 1 IF ARE SINGLE POLARIZED HT must transmit and receive only on channel 0 and NOT on 1 [and also the module must be properly internal connected] Hi Thanks for the DUal Polarized information. I wa...
by PeterSullivan
Wed Mar 19, 2014 1:46 pm
Forum: The User Manager
Topic: facebook on Hotspot page
Replies: 2
Views: 1945

Re: facebook on Hotspot page

You can add the customize buttons or you can redirect after login to facebook or twitter. You need to follow the instruction. http://stackoverflow.com/questions/1208 ... tter-login.
by PeterSullivan
Fri Feb 21, 2014 12:08 pm
Forum: Wireless Networking
Topic: USB power
Replies: 6
Views: 1499

Re: USB power

Try only when you are sure that it will work. I think you must use a power adapter, rather then using a power adapter.
by PeterSullivan
Fri Feb 21, 2014 11:56 am
Forum: The User Manager
Topic: facebook on Hotspot page
Replies: 2
Views: 1945

Re: facebook on Hotspot page

Need to contact the customer support center.
by PeterSullivan
Fri Feb 21, 2014 11:40 am
Forum: General
Topic: Whatsapp Blockage
Replies: 8
Views: 2036

Re: Whatsapp Blockage

Well I have also tired that but no result found.
by PeterSullivan
Fri Feb 14, 2014 11:45 am
Forum: Beginner Basics
Topic: Mikrotik + VoIP
Replies: 5
Views: 1517

Re: Mikrotik + VoIP

VoIP setting might be main issue of this. check the VOIP setting again.
by PeterSullivan
Fri Feb 14, 2014 11:38 am
Forum: General
Topic: help with hotspot
Replies: 4
Views: 1020

Re: help with hotspot

Make schema from your network pleace

I have the same issue, please explain in details that how I can do this.
by PeterSullivan
Fri Feb 14, 2014 11:23 am
Forum: SwOS
Topic: Spanning Tree Protocol
Replies: 26
Views: 16605

Re: Spanning Tree Protocol

Currently they are planning to adapot it.
by PeterSullivan
Mon Jan 27, 2014 2:36 pm
Forum: General
Topic: Hotspot Accounting Local Resorces
Replies: 2
Views: 3389

Re: Hotspot Accounting Local Resorces

Hi you can bypass with the software. like hidemyass to bypass without showing your ip
by PeterSullivan
Fri Jan 17, 2014 1:00 pm
Forum: General
Topic: strange ethernet problem
Replies: 7
Views: 1690

Re: strange ethernet problem

Yes as bysard said you can try export config in your old router and import config on new router. But make sure it support properly with your old routers.
by PeterSullivan
Fri Jan 17, 2014 12:36 pm
Forum: Wireless Networking
Topic: Management frame protection
Replies: 3
Views: 1969

Re: Management frame protection

I dont think so, since nv2 dont use the Wireless Security. Nv2 use the Secret in /Interface Wireless setting. Edit: Or maybe. if using key in Access list. :P Im unsure like you. I dont think so, since nv2 dont use the Wireless Security. Nv2 use the Secret in /Interface Wireless setting. Edit: Or ma...
by PeterSullivan
Fri Jan 17, 2014 12:07 pm
Forum: Wireless Networking
Topic: firewall solution for wisp
Replies: 4
Views: 2420

Re: firewall solution for wisp

If you are using MikroTik firewall then you no need to worry about. Because I has already a built in Firewall. If you want for 2 to 3 pcs then I suggest you to go for McAfee.
by PeterSullivan
Thu Dec 05, 2013 12:52 pm
Forum: General
Topic: 13Mbps for 480 students network?
Replies: 12
Views: 2167

Re: AW: 13Mbps for 480 students network?

13Mbps for 480 students network? any recommendation? Anyone had setup this kind of network? Any idea to set the Qos? Any proxy server use? This is crazy low. You should by all means inrease bandwidth or you'll run into problems. I would go with at least 100Mbits. We feed 300 Students with 100Mbits ...
by PeterSullivan
Thu Dec 05, 2013 12:36 pm
Forum: General
Topic: Putting ISO on USB Stick
Replies: 22
Views: 37910

Re: Putting ISO on USB Stick

Its really very cool feature. I am using it for moving ISO files to a USB flash disk.
by PeterSullivan
Sat Oct 26, 2013 3:15 pm
Forum: Beginner Basics
Topic: PPTP client connected but cannot access any devices
Replies: 4
Views: 1075

Re: PPTP client connected but cannot access any devices

Make sure to enable the proxy arp on the bridge or interface you are using. Gets me every time.

Thanks for this update tylenardo
by PeterSullivan
Sat Oct 26, 2013 3:03 pm
Forum: Beginner Basics
Topic: Squid with mikrotik router
Replies: 2
Views: 1839

Re: Squid with mikrotik router

Have you checked all the setting what about DNS setting have you checked all those.
by PeterSullivan
Thu Sep 26, 2013 2:21 pm
Forum: Scripting
Topic: Passing RouterOS command output (text) to a variable
Replies: 9
Views: 3992

Re: Passing RouterOS command output (text) to a variable

some time small wrong setting in the SMTP cause a big problem you can need to save the setting so that you can check the changes at any time.
by PeterSullivan
Thu Sep 26, 2013 2:17 pm
Forum: The Dude
Topic: Need to have the Dude send email when SNMP Oid changes
Replies: 5
Views: 4576

Re: Need to have the Dude send email when SNMP Oid changes

Yes it is possible. Create new Probe , which will be called Voltage, select Type as SNMP , put correct OID (which is reporting voltage), set correct compare method to declare that service is down when value is lower. Go to the Notification , create new notification with type e-mail, correct server ...
by PeterSullivan
Thu Sep 26, 2013 2:13 pm
Forum: General
Topic: Ubiquiti Unifi, Mikrotik & Vlans
Replies: 84
Views: 41553

Re: Ubiquiti Unifi, Mikrotik & Vlans

Make a bridge, put ports in as member. So port2,port3,port4,port5. Port 1 is internet. Make a new interface vlan 1 on the bridge. Then ofcourse dhcp. Ip ranges... I tried this and also make three vlan one extra for all the general, but is there any way to set the speed in all the 3 vlan. any idea p...
by PeterSullivan
Tue Aug 13, 2013 3:01 pm
Forum: General
Topic: Default Print for Scripts = Detail?
Replies: 1
Views: 642

Re: Default Print for Scripts = Detail?

Yes their are some default intergration with it.
by PeterSullivan
Tue Aug 13, 2013 2:55 pm
Forum: General
Topic: MikroTik News August 2013 (Issue #50)
Replies: 17
Views: 12890

Re: MikroTik News August 2013 (Issue #50)

I have subscribe to you news letter. thanks for sharing
by PeterSullivan
Tue Aug 13, 2013 2:52 pm
Forum: General
Topic: Double QoS for v6 is possible
Replies: 71
Views: 46215

Re: Double QoS for v6 is possible

Can anyone explain to me what's the meaning of the priority parameter in Simple Queues. I do understand what this parameters does when specified on the child queues in a Queue Tree, but that does not quite seem to apply to Simple Queues... Or does it? Any thoughts? as far as I (I hope) can (still) ...
by PeterSullivan
Wed Jul 31, 2013 3:12 pm
Forum: General
Topic: addr-list delay
Replies: 4
Views: 889

Re: addr-list delay

is this only for client purpose. or it also effect the Adminstrative data-sheet.