MikroTik

wa4zlw

Hi there...a friend has asked me if I knew of anything for 100g from Mikrotik. Does anyone know if there's anything planed or in the pipeline?

thanks leon

wa4zlw

@normis -- any other suggestions? I will be home over christmas week and will bring this CCR home and attempt a netinstall on my lenovo desktop which only has 8gb ram and I've used it to netinstall years ago

leon

wa4zlw

tried that disabled all interfaces except the one ethernet zip

very frustrating

wa4zlw

netinstall never detected the router

have green on CCR ethernet connect and blinking yellow on dell both set to auto negotiation. Dell has 1g interface

wa4zlw

hi normis...yes to console cable. I sent the routerboard info from putty to the support@mikrotik email I sent last night along with a screen shot. I just tried it and netinstall never sees the ccr. I have a linksys 1g switch between my dell laptop and port 8 of the ccr. The dell does not get a green...

wa4zlw

hi normis...yes to console cable. I sent the routerboard info from putty to the support@mikrotik email I sent last night along with a screen shot. I just tried it and netinstall never sees the ccr. I have a linksys 1g switch between my dell laptop and port 8 of the ccr. The dell does not get a green...

wa4zlw

does anyone have any ideas or suggestions?

wa4zlw

FOr a number of weeks on and off we've been trying to get a CCR1036-8G-2S+EM reflashed. It came back with my friend from Austrailia last year and he was able to get some 6.41.x on it but could not make it boot. I have been trying to use netinstall to put 6.39.3, 6.40.4 ot 6.40.5 on it. I have set my...

wa4zlw

wa4zlw, this 2016-Apr-25 09:29 is a timestamp for the listed features, when they were added to the specific version.

I'd like more specific info on each item with a date/timestamp

leon

wa4zlw

Sergejs---I've asked this before but got no replies....in the CHANGELOG can you please add a date/timestamp for each line item on when these were added and even more info like version affected etc?

Thanks leon

wa4zlw

Hey guys....

Can you please make a change to the CHANGELOG?

Please add a date/timestamp, plus the version # for that date/timestamp) for each change? At a minimum a date/timestamp.

THis gives everyone a more clear idea of what was fixed when, etc.

Thanks leon

wa4zlw

yeah thanks I just didnt see it - senior moments

Leon

wa4zlw

Hi there! I think I just fixed it! In the OSPF instance I had redistribute statics ON. Turned it off and bingo! I'll have to peruse the network and see what else it's doing. The OSPF instance and In Filter as ospf-in and Out filter as ospf-out. I think we got it but want to muck around with things t...

wa4zlw

Hi there...won't be able to do work in basement till weekend. I checked the LSA table and the originator is the same router. the AMPRNet gateway

Leon

wa4zlw

looking at the router the LSA table shows the AMPRnet RIP routes as external. That would seem to make sense to me.

leon

wa4zlw

Hi folks...the other night I noticed something weird on my spare MTK where I was putting my local hamnet on a VLAN. I think there may be something happening here. This box has an interface now with a local AMPRnet address but I havent had time to go into the basement and connect that cable to my man...

wa4zlw

Hi Marius....RESDISTRIBUTE CONNECTED is NO on both RIP and OSPF.
I added the filter and I still see the entries in the routing table and it is propagating out too.

73 leon

wa4zlw

ah another ham great!

i didnt have time to do some work in the basement tonight; will try tomorrow.

I'll get a suppout too

leon

wa4zlw

this is confusing me more and more...I'll look at it again tonight. SO the RIP routes are being imported as statics? I think I even disabled redistributing statics and nothing happened

leon

wa4zlw

good morning...looking at my ospf routing table it seems the AMPRnet routes are IMPORTED EXT 1. THe only place it's coming from is RIP. If I have Redistribute RIP routes set to know why is OSPF distributing it? The way I see it the gateway should have all the routes.Having a static in my local netwo...

wa4zlw

anyone from Mikrotik here?: THis i s a problem!

thank you Leon

wa4zlw

Hi there! I have a x86 ROS running as an amateur radio gateway (AMPRNet). My Watchguard firewall appliance handles gatewaying everything else. Both devices have a dynamic public IP provided by my cable ISP and managed my DynDns.com. I think I found a ROS bug. I wanted to make sure none of AMPRnet (i...

wa4zlw

I just double checked and I set the Dude OBJECT to RUN AS ADMINISTRATOR and that did it.

I vaguely remember what you mentioned.

many thanks.

leon

wa4zlw

just checked and its not running as a service but ALL TIME
I did crank back the UAC as well and pings still failing from dude.

anything else you can think of?

thanks leon

wa4zlw

was originally on a w7-32 VM which I migrated to W10-32.

The account installed is admin but I will double check. everything works except for pings

Thanks Leon

wa4zlw

can someone explain why I am getting these ping failures when I can ping from the box dude is running on?

ALso, you need to rethink the windows server component please

thanks leon

wa4zlw

will a 4.4 come out then as I am not migrating to the new dude at this time since there is no windows server

leon

wa4zlw

Is anyone from Mikrotik support reading these posts please?

Thanks leon

wa4zlw

Has anyone else seen this or know how to resolve it?

THanks leon

wa4zlw

About a month or two ago I had to reinstall the windows beta since I had a VM issue. I tried to restore what I had but ended up having a hybrid since I had to recreate objects. The VM is running on W10 instead of W7. (and it was running W10 prior to the rebuild) In any event a lot of my devices retu...

wa4zlw

as I have mentioned in another thread routers do not make a monitoring system and vice versa.

Leon

wa4zlw

GOod morning...

I'm still struggling why the decision was made to abandon the windows server? RouterOS is a router; a router is not a monitoring system. ANd vice-versa a monitoring system is not a router.

So whats the real reason?

Thanks leon

wa4zlw

also you need to provide correct templates for Hyper_V and VMWare, etc. what is out there does not even work. Leon it is not virtual instance template or anything of that sort. It is just an disk image, that you add to the guest instance. please provide correct templates for the VMs you are support...

wa4zlw

also you need to provide correct templates for Hyper_V and VMWare, etc.

what is out there does not even work.

Leon

wa4zlw

ok thanks for the bandaid on using the x86

still prefer windows server.

Leon

wa4zlw

"You can still use standard x86 ROS installation in some VM, just get free level 1 demo license level for the dude server. If should be perfect as there are no traffic limits there. http://wiki.mikrotik.com/wiki/Manual:Li ... nse_Levels" Clicking that link there;s a link that says registration which...

wa4zlw

take 3 - please Normis....I pulled down the VM images and Hyper-V gets an IMPORT FAILED! A server Error occurred while attempting to import the virtual machine. Import failed. Import failed. Unable to find virtual machine import files under location "D:\xfer\Mikrotik\VM\". You can import a virtual m...

wa4zlw

Normis can u please answer my question on hyperv?

Thanks leon

Sent from my 0PJA2 using Tapatalk

wa4zlw

take 2 - please Hi folks....I pulled down the VM images and Hyper-V gets an IMPORT FAILED! A server Error occurred while attempting to import the virtual machine. Import failed. Import failed. Unable to find virtual machine import files under location "D:\xfer\Mikrotik\VM\". You can import a virtual...

wa4zlw

Hi folks....I pulled down the VM images and Hyper-V gets an IMPORT FAILED! A server Error occurred while attempting to import the virtual machine. Import failed. Import failed. Unable to find virtual machine import files under location "D:\xfer\Mikrotik\VM\". You can import a virtual machine only if...

wa4zlw

Need windows server

Sent from my 0PJA2 using Tapatalk

wa4zlw

I've seen that on WIndows 7 as well

Also it seems services on locally connected devices go up and down quite a bit during the day and takes awhile to come back up. I think that is totally Dude related

Leon

wa4zlw

Hi Sergejs...any new info please?

thanks leon

wa4zlw

here's more info to peruse: Leon; On Mon, 2015-03-30 at 19:36 -0400, Leon D. Zetekoff wrote: > hey brian...well the mtk is linux...i dont see how a linux box solves > creating the multiple tunnels All our tools are developed for a true native linux platform, not linux-based such as Microtik/Android/...

wa4zlw

I know a few folks out there are hams and have this working and I'm trying to make it work with Mikrotik. The way it is implemented is with Ip over IP tunnels and there is RIP. But there needs to be a way to dynamically create the IP over IP tunnels since connects can come from many locations. Daily...

wa4zlw

Can not create PDFs from wiki been like this for a few weeks

Book rendering failed

There was an error while attempting to render your book.

Return to Main Page.

In this case I was trying to pdf the dude manual but others do the same thing

thanks leon

wa4zlw

HI Sergejs...but I am seeing nothing in my torch or the log entries on the interceptor sending sniffed traffic. Now since this is on a CRS switch port and I have VLANs I am wondering if this is the problem? VLANs are being handled by the CPU not the switch I beleive the way I have it. What do I need...

wa4zlw

has anyone had a chance to take a look?

Thanks leon

wa4zlw

yes but it works for what I need it for and there is always hope we will be surprised.

wa4zlw

I've got torches on each ROS box and dont see any traffic going/coming from either 10.161.51.4 or 10.161.51.2.

The interceptor is collecting off ether-8-master which is the master port of that switch segment.

I'm stumped.

Leon

wa4zlw

ok folks here is what I have. This is on my CRS which is the interceptor @ 10.161.51.4: [admin@CRS125.wa4zlw.homedns.org] /ip firewall calea> p Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward action=sniff sniff-target=10.161.51.2 sniff-target-port=300 src-address=10.195.13.10 log=yes l...

wa4zlw

yeah guys I got it running as an admin service.

What would be nice is a Dude VM template that is all by itself. Of course we need the dude to be upgraded.

Leon

wa4zlw

Ill check it out tonight thanks

leon

wa4zlw

Hi Sergejs...when I get back to this later this week I will.

Leon

wa4zlw

thats stupid pings need admin priv!

I have it running as a service or supposedly but how do I make it admin? I ran it as a task as admin last night and it did ping.
will it always autostart as admin priv if as a service? I dont want or need user intervention.

thanks for the explanation.

Leon

wa4zlw

no but i've never needed this before and if it was an admin problem (user that logged in is administator anyway) the other discovers shouldn't work either?

Leon

wa4zlw

I moved my dude from one box to another since I am decommissioning the old one. I finally found some time to play with this over weekend. The old box was Windows 2003 and the new box is Windows 7. my devices and what not were there but PING stopped working comes up with some error. BUT, from a CMD p...

wa4zlw

I'm trying to setup a calea capture off a CRS and running into issues. I followed the Wiki and setup the intercept for two LAN ips (on different VLANs), in and out, and I turned on logging with a prepended CALEA to identify it in the log. yet if I try and ping that device, it responds as I would exp...

wa4zlw

Hi there! This is not good. What I need to know if there are any specs on the various hardware platforms for performance especially throughput on VPNs. That is something I need access to. THen we can compare the specs to real-world. Mikrotik needs to be more forthcoming all the way around as well as...

wa4zlw

Hey Normis...As I, and others, have mentioned this V3 version is a show stopper since it crashes on W7. What are you guys doing to fix this. I also agree not to hold us hostage on buggy software.

Thanks leon

wa4zlw

when i click on a router to connect, the app crashes can not paste screenshot in for some reason my laptop is not capturing it winboxv3beta.exe has stopped working Check online for a solution and close program Close the program was able to get this from the dialog box: Problem signature: Problem Eve...

wa4zlw

beta 3 doesnt work for me either on W&-64bit doesn't matter what boxes I have on the other side just doesnt come up

leon

wa4zlw

looks like it came back about 20 min ago; log indicates reboot.

wish they would test things before releasing.

THanks leon

wa4zlw

I just upgraded a remote 751 from 6.14. --> 6.15 and it never came back

Now what?

Leon

wa4zlw

I have a synology NAS and you can try and make hairpin or loopback work but just create a static DNS entry for the inside LAN that points the FQDN to the local IP then you should be all set.
are you using a dynamic DNS service like DYNDNS for outside?

THanks leon

wa4zlw

what about the OSPF/IPSec issues which also seem to be in 5.26?

wa4zlw

hi folks...I was running 6.12 and switched to 6.13 and I think that was a mistake. I am using IPSec tunnels to my other sites and it seems OSPF no longer propagates across the tunnels. I have a Watchguard XTM520 running latest released code which is my hub for all tunnels. Anyone else having similar...

wa4zlw

I have been need to do MPLS/VPLS over GRE. Has anyone done this on MTK?

THanks leon

wa4zlw

in my 50M router the Bridge-2-FW interface keeps disappearing BUT if you try to recreate it it says its already there but the ports and hosts tabs show UNKNOWN for bridge

in the 10M router bridge port doesn't disappear.

ldz

wa4zlw

OK sports fans...I've been trying for months to setup the Watchguard XTM520 I have here which has live licenses in it to use as my primary firewall. My ISP provides two (2) dynamic IPs per circuit. THey do NOT support DHCP relay though, so this makes things more difficult. Both of my ROS 6.11 are in...

wa4zlw

Hi There....

I'm trying to figure out how to get 5.x x86 into proxmox. WHat did you do?

Thanks leon

wa4zlw

Hi FOlks..happy gobble...

I'm looking at running x86 ROS virtualized in Proxmox. Has anyone done this and if so can you point me in the right direction on what steps need to happen to get there?
THanks

Leon

wa4zlw

THis is good thanks is there anything with some sample scripts around?

TIA LEON

wa4zlw

HI there....looking at using calea for a variety of reasons including debugging and performance investigations. THe stuff on the wiki is pretty bland; can anyone point me to somewhere that has some real life examples for MTK?

TIA Leon

wa4zlw

let me expand on this since noone has picked up on this... Two MTKs talking to two separate cable connections getting DHCP from provider. Have Wathcguard firewall connected to both MTKs via cross-over cables requesting DHCP. I've setup DHCP-Relay to push the DHCP request from the interfaces the Watc...

wa4zlw

HI there!

end result yes mtk on both ends but for testing server mtk and client is under linux openvpn under centos

THanks

wa4zlw

I've attempted to make OpenVPN work without certs. Is this possible?

ANyone gotten OpenVPN working to another MTK or to another client? If so can you assist?

THanks.

Leon

wa4zlw

HI there! Running 5.26 on two watchguard boxes (x86) with two different cable connections using DHCP from provider. MY watchguard XTM520 is connected via cross-over cables to a separate port. I have the WG setup to grab DHCP. On the MTK boxes I attempted to setup DHCP relay I see requests coming in ...

wa4zlw

HI Normis.... Disappointed that I didn't see any routing fixes for BGP and OSPF plus other items that really need to be fixed. WHy are you now talking about v7 when v6 is so new? I think that routing fixes need to be added ASAP and better testing done. folks have bought the CCRs and really can't use...

wa4zlw

does anyone have any more informaiton on linux on CCR? who got it going, etc> any links etc?

thanks leon

wa4zlw

another BUG on both 6.0 and 6.1

seems you can not change the serial port to anything BUT AUTO. Why is this? We can not make any connections with the serial ports.

Leon

wa4zlw

FWIW I have two connections at home. My 10m connection is for my VOIP and my 50m connection is for data. When I went to 6.x after awhile my VOIP router would have very high latency due to all sorts of connections being made. This only happens on the VOIP router. I've regressed back to 5.25 after a f...

wa4zlw

the release notes don't mention the issues I had with the RB450G.

BUGTRACKER is needed. Is this officially released now? If so I dont see it on the website.

Leon

wa4zlw

how does the user package have anything to do with ip address/dhcp???

wa4zlw

I upgraded from 5.25 --> 6.0 on an RB450G that I manage and all hell broke loose. whole network went down on the inside. Turns out IP addresses weren't being leased or if they were the ACKs weren't coming back. Total disaster. Had to downgrade to 5.25 to get things back to normal. Anyone have any id...

wa4zlw

Hi there I've got OSPF running and it seems to be ok but we have an IPSec tunnel to a friends house which terminates on a fortinet firewall and we can't get OSPF working. I do have OSPF working over a PPTP link to another mikrotik and two mikrotiks in the house. all in same area. any ideas? Thanks L...

wa4zlw

Turns out router did not crash. Local LAN lost its ip but also don't remember what happened on the wan side of the router. But now p1 is down Will have to revisit this Sunday as when the link was up with things set as generate policy all ofy traffic attempted to go out the IPSec tunnel which is not ...

wa4zlw

the router crashed during this earlier so I when I get home around 4:30 P.M. EST I'll be able to see what happened.
yes that makes sense. doesn't explain why that display always shows P2 as 0 either

Leon

wa4zlw

the only way phase two would come up is by turning on generate policy. also when I look at REMOTE PEERS and double click on the peers PH2 still shows 0's but we were able to pass data

definitely different than watchguards

wa4zlw

it seems phase 1 is coming up but phase 2 is not. this is talking to a fortinet 50B which keeps telling us there are errors but doesnt seem to qualify that.

wa4zlw

the masquerade rule is a /24; cut-n-paste got me. ok so if this is correct why can't we tracer across?

wa4zlw

here's what I have so far: /ip ipsec proposal set [ find default=yes ] auth-algorithms=md5,sha1 disabled=no enc-algorithms=\ 3des,aes-256 lifetime=1d name=default pfs-group=modp1536 add auth-algorithms=sha1 disabled=no enc-algorithms=aes-256 lifetime=1d name=\ SHA1-AES256-DH1536-1D pfs-group=modp153...

wa4zlw

the policies define the local networks on each side. If I attempt to traceroute from the router across the tunnel it goes out the default route to the internet.

Obviously I am missing something

wa4zlw

ok for now we're recrafting what we are doing. I have configured IPSec on both sides (my side ROS) remote side Fortinet). I added the bypass NAT in the front of the firewall config. THe only thing that seems to be missing is routes outbound to the tunnel. I don't even see the remote tunnel as an IP ...

wa4zlw

Yeah but that's what watchguard and other vendors call it. I am also familiar with Cisco and adtran routers from a routing standpoint as I work for a carrier here in the u.s. We tried last night attempting to connect ROS to a Pfsense firewall remotely with IPSec and failed miserably. But as I said I...

wa4zlw

Thanks. I work with watchguards everyday so I am familiar with VPNs. Have you implemented bovpn? I'd prefer sslvpn instead of IPSec

Leon

wa4zlw

I am attempting to create a point-2-point or Branch office VPN using SSLVPN and I only seem to be able to create client-server profiles. I really need SSLVPN but also interested in L2TP and PPTP. SPent hours last night working on IPSec and it is a nightmare and then the hard drive in my router died ...

wa4zlw

I don't think this is a 5.2 issue per se, but I am seeing dynamic PPTP sessions disappearing. My static PPTP is staying up. My dynamic ones are coming in over 3G wireless (from Verizon in my case) and it seems to drop quite often and no this is not with any calls coming in to kill the data stream. L...

wa4zlw

FYI - 1736 EDT and can't get to .zips etc

leon

wa4zlw

before I left for work so far so good. I won't know until lease expires

leon

wa4zlw

my core router 10.161.51.1 is a dns server as well as dhcp server. I've configured 10.161.51.1 as the primary DNS I've attached a screenshot I think I may have found it but dont understand why it would work sometimes and others not. I set the DNS options as well and did not put 10.161.51.1 as the pr...

wa4zlw

HI there!

ok it works there but all clients on my network are not working. So what is the problem? Could it be when the DHCP lease expires and renews?

thoughts?

Thanks leon

wa4zlw

wasn't aware of it. Nice. But a few things.

1. website has lots of 404 errors
2. once I create a device I can not change the user/pwd unless I delete and reenter it
3. website seems to indicate more than one version yet one version in the app store/?

thanks leon

wa4zlw

any chance of an iPhone port?

Leon

wa4zlw

attached is a screenshot showing the tunnel working going to the address that is supposed to be resolved.

wa4zlw

Hi Folks! I'm running 4.16 here on a PC box here and on an RB450G at our synagogue. This has been a headache for me. I have a PPTP tunnel between both locations (for secure Asterisk connections between both locations). AMd that seems to work. I use dyndns.org to host DNS for both locations. THat wor...

wa4zlw

i reported the bug is still there see way up in this thread...ldz

wa4zlw

Has any progress been made on the graphing bug I reported last year?

thankx

wa4zlw

normis:

Ticket#2009081466000221

wa4zlw

Normis...this was reported numerous times last year and each time a new Dude came out was told there was no time to implement the fix. It was confirmed by you guys and I did have support ticket opened on it.

wa4zlw

I just checked and the graphing bug is still there. This is really irritating. This was reported numerous times last year. TO see this bug in action use SNMP and rollover the link and get the history and then switch to a different interface and you will see a huge spike. THen go back to the interfac...

wa4zlw

Haven't had time to check to see what happens when I go back to 3.6 I did find a hardcopy of some stuff but it's time that is the problem. also, regarding the graphin issues in 3.6, the problem I specifically reported was if you changed an interface being monitored it would spike sky high and then s...

wa4zlw

Interesting....in my case I installed new dude and that was it after a reboot. I have nothing going on that should cause this. It'd be nice to see a system processes tab (or am I missing something since I just woke up?) to see what's running ?

thanks leon

wa4zlw

after quite awhile when I checked again it settled down to a dull roar (very low %)

wa4zlw

1. it says "localhost" is usable for local box and is prepopulated in the address box on startup. so I have to use an ip of the local machine when localhost has to be defined? 2. losing my 3.6 maps. I can try reinstalling 3.6 on this box then what? 3. graphing...the bug I reported and was confirmed ...

wa4zlw

I noticed my cpu on ROS 4.10 has been sitting at 100% since I rebooted and installed the dude beta. was not like this with 3.6 Dude. ANy thoughts?

Leon

wa4zlw

I also migrated from 3.6 --> 4.0 beta and lost all my maps

also, I was unable to run locally on localhost could never connect?

I also reported a bug over a year ago regarding graphing and the erroneous spikes I was seeing. was this fixed?

thansk leon

wa4zlw

The older ones don't format nor copy any files. Everything is documented in this thread.

wa4zlw

Another update: I just redownloaded netinstall.zip and it is dated end of feb. I "burned" a new image on the CF. It fails on the WG as well as my Netbook. The messages on the Netbook are different than last reported (I am ASSUMING this is what is happening on the WG but nothing is output on the com ...

wa4zlw

That was NOT the version that was downloaded from the web when I downloaded ROS 4.6. I just noticed there is a different date/timestamp on that exe. THe test code allowed it to install onto the CF but would not boot and finish the install. See above I am tired of typing duplicate comments. What's th...

wa4zlw

Normis... 1. The version on the website was dated 2/9 and would NOT format and install files to CF. 2. THere was a newer version that did do that but when it was booted on either the WG or my Netbook it would fail. See above for exact message. Basically it could not find a filesystem/device. 3. I su...

wa4zlw

I would say YES

wa4zlw

why not have a repository on the MTK website or somewhere? a Firewall icon would be nice.

Leon

wa4zlw

I'm in this a little late, but I am throwing my $0.02 in FWIW: 1. A Java port would be nice as it is multi-platform, and since it was originally Java based that should not be too difficult. There are other OSes besides Windoze, Linux, Mac, etc (OS/2, eComStation come to mind) 2. The WebUI should be ...

wa4zlw

I'm in this a little late, but I am throwing my $0.02 in FWIW: 1. A Java port would be nice as it is multi-platform, and since it was originally Java based that should not be too difficult. There are other OSes besides Windoze, Linux, Mac, etc (OS/2, eComStation come to mind) 2. The WebUI should be ...

wa4zlw

also,as I have indicated, the WG boots MTK from a hard drive. and one other item, others are having same problem with other platforms.

ldz

wa4zlw

this is going round-n-round. It's all documented up above. The short answer is YES and it did not work either (a netbook)

wa4zlw

hi normis! yes as I indicated the .zip file has the 2/9/10 .exe and I did redownload it. Also, the one that was in the temp directory off the website while it formatted and added files I reported that it failed to boot (see above) which I believe you fixed but I never saw another test version. thank...

wa4zlw

MTK says they "fixed" the problem, but the version released is the wrong one. But in response to your question, my co-worker has PFSense on a 4gb CF. As I have said, I found a MTK 3.30 on a laptop IDE and that boots fine. I have since upgraded that to 4.6. The first problem with Netinstall was it fa...

wa4zlw

nope that's NOT the problem. If you read the thread you would see that wasn't the only platform it failed on and I wasn't the only one having Netinstall issues.

ldz

wa4zlw

There was a 4.6 version that would not error out but the stuff it installed didn't work (boot properly,etc). Then they said they fixed it again after I sent a message. Then they released 4.6 and reverted to an old non-working version.

IMHO they need better s/w control mechanisms.

leon

wa4zlw

I grabbed the "NEW" netinstall-4.6.zip from the download page and guess what? it doesn't work, AGAIN. The date on the .exe is 2/9/10. COme on guys, please get your release mechanism straight. Also, I request the following: 1. everything should have info on the version x.y.z in an ABOUT or HELP inclu...

wa4zlw

As a former embedded engineer I would predict it's hanging off the parallel port. SOmeone on the forum made an early post about that?

Thanks

wa4zlw

UPDATE: MTK says WG has a problem. I say WG is not problem since I can boot original WG CF. I found a laptop drive with v3.30 on it and it boots in the WG. So while that solves my initial issue, does not serve long-term as I need to use CFs. I added the LCD package and while I see what looks like th...

wa4zlw

UPDATE: BAD NEWS---- Image seems to get to CF but doesn't boot. 1. CF as IDE -- files seem to get to flash but sometimes filesizes are 0 bytes. Was able to get a good load. Put into WG boots and after a few minutes reboots and thats it. Nothing out on serial port nor nothing seen by Winbox on a PC. ...

wa4zlw

Hi Guys...

I stand corrected. I grabbed it from the wrong place.

It works. Thanks. Now I need to see if the image loads on the WG

Leon

wa4zlw

Hi there!

Just DL'ed the file you told me about in the e-mail. Still fails same way.

Thanks, Leon

wa4zlw

Hi there...

I'd prefer to get a copy NOW so I can test it and get moving on my project. I can not wait for yet another fix of the week.

THanks, Leon

wa4zlw

Normis...

Where are we on getting this resolved? My project is totally stopped until I can move forward. I am trying to introduce Mikrotik into the company I work for, PAETEC (a large CLEC/ILEC) and this doesn't bode well.

Please give us some status.

THanks leon

wa4zlw

I suggest you output some debugging to a .txt file to see what's happening. Also, 9 times out of 10 I keep getting logged out when I want to reply. It's possible that I am gettting timed out but I do successfully log back in but I try and report and get the logon prompt again.

ldz

wa4zlw

Hi Normis...

sorry fails same way.

Leon

wa4zlw

Just got to work. WIll try it tonight when I get home.

THanks!

wa4zlw

take 3 (3rd attempt tp post)

Hi Normis: WHen will that be? I am working on a project at work with the WG and need to get moving ASAP.

No beta?

Thanks leon

wa4zlw

Any updates on this?

wa4zlw

8gb and 4gb CF fail.
4gb IDE (real disk) works
4gb CF as IDE fails (via CF--IDE adapter

wa4zlw

FYI fails for me as well -- I even tried formatting FAT32 first too and got same results.

wa4zlw

I can't test it till tonight but I see it already fails. May I suggest a debug version that outputs a log we can send you?

wa4zlw

FUrther update: Used an IDE --> CF adapter on another machine with exact same results. then tried going to an IDE drive (4gb) and that worked BUT only AFTER I formatted the IDE drive as FAT32. But I need to use the CF not an IDE since I haven't found power in the WG for the IDE drive. Leon PS: Yes I...

wa4zlw

Ok fantastic, at least I'm not the only one. So what's next folks?

Thanks leon

wa4zlw

I actually did. I said it starts to format and then says can not copy system files. Here is the screen.

ldz

wa4zlw

Hi Normis.... You guys are not hearing what I am saying. I can not longer use Netinstall it dies saying whatever I mentioned up above. I wanted to use the netbook since there is no display (except the 2-line LCD) on the WG and if memory serves me correctly when you do an initial boot doesn't it ask ...

wa4zlw

yes...i was trying to setup/config the CF with the use of the netbook since it has a keyboard and screen and then move the CF to the WG. What I don't understand is why Netinstall stops working.

wa4zlw

Then what's happening here then any ideas? Yes the schematic would be good too.

wa4zlw

As an FYI...the Netinstall version says 4.6 yet the files pulled down are 4.5; this (netisntall) is not version specific is it?

wa4zlw

Hi Normis... Once I did the successful write I rebooted the PC to test and get it installed on the netbook I was using before I move it to the Watchguard. THe netbook allows booting off USB. I forced the boot to the USB and it didn't see a boot image (I am guessing) and booted windoze. Now subsequen...

wa4zlw

UPDATE: Got 4gb stick does same thing. It seems Netinstall will format and write the contents one time. I then tried to reboot the PC from the USB and it bypassed the CF and went to Windoze. Windoze then showed it (the data) gone. If I now try and reinstall get the recurring error mentioned above. I...

wa4zlw

That's what I did. I'm sending my wife back to exchange it for a 4gb CF. Netinstall attempts to format and then dies.

Leon

wa4zlw

Update: I picked up a 8 gb CF @ Walmart this morning and have been unsuccessful. I was able to use Netinstall once to load up the files but when I tried to boot off the USB/CF it didn't. Since then I have been unsuccessful trying to reinstall. Netinstall says can not copy system files. Windoze think...

wa4zlw

Hi All.. I have some Watchguard xSeries firewalls that I got from work which are end-of-lifed. It's based on a PIII processor has a 256mb ram stick and 64mbCF card. There's an IDE interface inside, LCD, serial port and a bunch of ethernet ports as well as a mPCI slot with a VPN accelerator and some ...

wa4zlw

Hi there... Tom's suggestions are good. Have you did a SCAN on the XR9(s) to see if you're getting and nearby pagers, etc? Also, is the problem on all the CPEs on 900 or just one? What's at the user end of the link (noise floor, CCQ, signal)? Could be something at the user end like cordless phones, ...

wa4zlw

thanks for the info...so what I am seeing is I have to modify the html for the login page. What I want to do is take it one step further and have the user create their own account and go through Paypal.

thanks again will look at it over the weekend.

leon

wa4zlw

Hi there...been playing with the hotspot stuff andI have it working but what I really want is on the login page to have a link or button to be able to create an account and then after the account is created be presented with the logon page or be logged in. I've looked through the wiki and haven't fo...

wa4zlw

Is there a built-in way to run a DYNDNS client? I'd hate to have to run a Windoze app to do this.

Thanks leon

wa4zlw

If the radio IS working it makes it easier to reboot without having to login to the actual radio that you want to reboot.

ldz

wa4zlw

It would be really nice if I can issue a REMOTE REBOOT to a given IP and/or MAC address. There are times when a radio seems to be working but I can not mac-telnet in and this would be a way to (1) see if the system is responding and (2) if not then we know a hard reboot is needed.

Thanks leon

wa4zlw

the solution was to add in another CDROM drive and it worked. Possibly the type of disks I used was >650mb and this drive may have had issues with booting off it.

thanks leon

wa4zlw

:cry: Ok I've burned a bunch of images and all do the same thing; the BIOS reports no operating system on the CD. Yet when I put in a known CD like SuSe linux install, it starts right up. Looking at the CD under Windows shows an isolinux directory with a bunch of .nbk (?) in the root. I must be miss...

wa4zlw

We have a site that may have some solar power. Can I monitor the battery voltage with the Routerboard and send an SNMP alert if it his a threshold?

Thanks.

Leon Zetekoff

wa4zlw

Hi there...Does it only run on Windoze? Is it possible to get a compile for OS/2 (eComStation)? (If not by you is the source avail?)

Thanks,

Leon Zetekoff
BackWoods Wireless
Blandon, PA

Search found 169 matches