Community discussions

Search found 97 matches

by grusu
Mon Sep 30, 2019 1:22 pm
Forum: Beginner Basics
Topic: L2TP (IPSec) connection fails from MikroTik Client to MikroTik Server
Replies: 13
Views: 1020

Re: L2TP (IPSec) connection fails from MikroTik Client to MikroTik Server

11:56:08 l2tp,ppp,info L2TP-Client: terminating... - old tunnel is not closed yet

Do you have an open connection on your PC?
You must close first.
by grusu
Thu Sep 26, 2019 10:38 am
Forum: RouterBOARD hardware
Topic: CRS112-8P-4S-IN
Replies: 3
Views: 326

Re: CRS112-8P-4S-IN

Hi, From what I understood, if you use both sources simultaneously (28V and 48V), the switch should supply the equipment with the required voltage depending on the type of PoE: passive or active. It has a field where you can set the voltage to: Auto, Low or High. Annotation 2019-09-26 104004.png Nor...
by grusu
Tue Sep 24, 2019 9:40 am
Forum: General
Topic: Audience Tri-band mesh
Replies: 14
Views: 1256

Re: Audience Tri-band mesh

Can they be combined with other APs using mesh? For example with cAP ac using ethernet connection eventually?
by grusu
Tue Jul 02, 2019 5:06 pm
Forum: RouterBOARD hardware
Topic: What RB to choose?
Replies: 6
Views: 1025

Re: What RB to choose?

I can use wireless capability of current rb. Was already watcing for hex and hex s but didnt knew it can handle that troughput. Thank you Can handle 1000 Mbps and is capable of hardware accelerated encryption: https://mikrotik.com/product/hex_s#fndtn-testresults https://wiki.mikrotik.com/wiki/Manua...
by grusu
Mon Jul 01, 2019 2:15 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 69600

Re: v6.45.1 [stable] is released!

wlanX is then the "name" of the interface ?
Yes. In my case wlan 5GHz interface is called "wlan5":
wlan.PNG
by grusu
Mon Jul 01, 2019 12:30 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 69600

Re: v6.45.1 [stable] is released!

You can try: /interface wireless reset-configuration wlanX where "wlanX" is your 5 GHz wlan interface.
by grusu
Thu Jun 06, 2019 4:55 pm
Forum: General
Topic: hAP ac² as switch + ap
Replies: 9
Views: 768

Re: hAP ac² as switch + ap

Hi,

You can configure a bridge to put the eth0 - eth4 and wlan (2.4 and 5 GHz - physical or virtual) ports. Wlans must be configured in "ap bridge" mode.

Best regards,
Geo
by grusu
Wed May 29, 2019 9:00 am
Forum: RouterBOARD hardware
Topic: S+2332LC10D Availability ?
Replies: 2
Views: 409

Re: S+2332LC10D Availability ?

by grusu
Mon May 13, 2019 11:15 am
Forum: RouterBOARD hardware
Topic: 2011UiAS-2HnD
Replies: 1
Views: 310

Re: 2011UiAS-2HnD

by grusu
Wed Feb 27, 2019 8:31 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36247

Re: v6.44 [stable] is released!

Hello, After the upgrade, the VPN client cannot connects. One of my colleague updated 5 routers. Please don't ask me why, but not working. Can I ask any expert where and what can I have to change to make it working again? :( TIA Hi, What VPN solution do you use? I guess you mean you can not connect...
by grusu
Thu Feb 21, 2019 9:27 pm
Forum: Beginner Basics
Topic: Multiple L2TP/IPsec client connections from RB931
Replies: 2
Views: 215

Re: Multiple L2TP/IPsec client connections from RB931

I have 6 simultaneous L2TP/IPsec client connections and it works perfectly.
by grusu
Thu Nov 29, 2018 12:53 pm
Forum: Scripting
Topic: Update interface address, DHCP server configuration in bulk
Replies: 1
Views: 322

Re: Update interface address, DHCP server configuration in bulk

Hi,

You can set up everything in a router after which you export the configuration.
If you look into the exported file you will see that it contains all the commands that generate the settings made.

https://wiki.mikrotik.com/wiki/Manual:C ... Management

Best regards,
Geo
by grusu
Mon Nov 19, 2018 2:23 pm
Forum: Forwarding Protocols
Topic: Redirect DNS to Local Server
Replies: 12
Views: 6436

Re: Redirect DNS to Local Server

If the DNS server is the Mikrotik router, make a static record in it for that IP address.
by grusu
Fri Nov 16, 2018 4:59 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 70402

Re: RB4011

You do not need to open it to see that mpcie slot connectors are missing.
by grusu
Wed Nov 14, 2018 9:37 am
Forum: General
Topic: Product Matrix
Replies: 2
Views: 377

Re: Product Matrix

A matrix with MikroTik products would be very useful. I have often looked for a specific product, and although I know them well enough, it would have been easier for me to make a comparison between them, especially when I had to make some compromises because none of them had all the characteristics ...
by grusu
Sun Oct 21, 2018 12:56 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 22592

Re: v6.43.4 [stable] is released!

*) led - added "dark-mode" functionality Sunglasses not needed anymore? in my LDF I can not find the function.... Is not dark-mode function - is a functionality. On some devices, you can close the LEDs using the command: all-leds-off Read here: https://wiki.mikrotik.com/wiki/Manual:System/LEDS#Leds...
by grusu
Wed Sep 19, 2018 2:21 pm
Forum: RouterBOARD hardware
Topic: RB1100 dead
Replies: 12
Views: 1355

Re: RB1100 dead

Just a remark: Maybe it's not a good idea to put the router over a speaker with such a powerful magnet.
by grusu
Sun Sep 16, 2018 6:02 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 83827

Re: v6.44beta [testing] is released!

Winbox 3.18 - not working... When running it on a PC...
Try to clear cache:

Tools > Clear Cache
by grusu
Sun Sep 16, 2018 1:11 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 83827

Re: v6.44beta [testing] is released!

Well, I guess it should still be possible to login with Webfig or SSH?
Hi,

Try to update winbox to 3.18 version.
From which version you upgraded RouterOS to v6.44beta?

Geo
by grusu
Sun Sep 16, 2018 12:52 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 83827

Re: v6.44beta [testing] is released!

Upgraded now, and I am not able to login anymore. Password appears to be changed. Same problem in Webfig as SSH. Known issue? Any idea how to restore?
viewtopic.php?f=21&t=139189
by grusu
Thu Sep 13, 2018 8:45 am
Forum: RouterBOARD hardware
Topic: 100Mb LAN - what's the point?
Replies: 13
Views: 1726

Re: 100Mb LAN - what's the point?

Hi, I have 1 Gbps internet connection for a few years, and I really do not need equipment that has a 100 Mbps connection than when I plug in IP camera, for example. But think that not everywhere in the world where Mikrotik sells routers the people is so lucky. A few years ago I was in the UK to set ...
by grusu
Sun Sep 09, 2018 3:50 pm
Forum: General
Topic: How isolate a WiFi connected device ?
Replies: 4
Views: 488

Re: How isolate a WiFi connected device ?

You can use Wireless Access List with VLAN.
You can even have a Private Pre Shared Key.
by grusu
Fri Sep 07, 2018 11:46 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 70402

Re: RB4011

does Realtek RTL8367 manageable switch and support acl? Nope. It's crap :( https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features I think the chip has several possibilities implemented in hardware but are not yet implemented in RouterOS: http://www.realtek.com.tw/products/productsView.aspx?Lang...
by grusu
Sat Sep 01, 2018 10:53 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

I can't change the name of the admin user:

[admin@MikroTik] > /user set 0 name=test
failure: user name can't be changed


nor any other user.
by grusu
Thu Aug 30, 2018 3:58 pm
Forum: Beginner Basics
Topic: RB3011UiAS Password was changed?
Replies: 10
Views: 813

Re: RB3011UiAS Password was changed?

And you always have one eye on the forum and one on security blog:

https://blog.mikrotik.com/
by grusu
Sun Aug 26, 2018 11:27 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25108

Re: Blacklist Filter (Development Topic)

But I get error in the log: Blacklist Authorization failed

Which is the active and good script?
You must enable IP Cloud service first.
by grusu
Thu Aug 09, 2018 11:02 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25108

Re: Blacklist Filter (Development Topic)

Dave, Have you considered using external to your network honeypots as source of offending IPs? I use as the first frontier such RAW drop rules and all the time there are some IPs on the list of attackers. add action=add-src-to-address-list address-list=RAWATTACK2 address-list-timeout=127m chain=pre...
by grusu
Tue Aug 07, 2018 3:30 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25108

Re: Blacklist Filter (Development Topic)

Hi Dave,

In first list first address is 255.255.255.255 . Is that right?

Thanks,
Geo
by grusu
Tue Aug 07, 2018 8:22 am
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 88790

Re: Winbox vulnerability: please upgrade

As far as I can see in the first picture, the sys user can log only from IP 127.0.0.1 so you can only try from the serial port.
by grusu
Fri Aug 03, 2018 10:46 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

Hi,

Something is wrong with the Hash Algorithms in Peer Proposal setting in v6.43.51:
Peer Proposal mismatch.PNG
If I have to set the SHA1 algorithm, in WinBox I have to set md5.
by grusu
Tue May 29, 2018 11:01 am
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 1441

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Ok but I can do about 5 pm. I have default configuration wifi 20/40/80 MHz Ceee. I don't know why is this problem. This model Mikrotik will be no problem 200-300 Mbit/s 5GHz yes? 2 meters to router. If you did the test between your computer and a WAN site you are limited by the 100 Mbps WAN connect...
by grusu
Thu May 17, 2018 1:15 pm
Forum: RouterBOARD hardware
Topic: New : RB760IGS - HEX-S
Replies: 38
Views: 14349

Re: New : RB760IGS - HEX-S

How about RM(rackmount) version of Hex?
Better a frame in which to put up to 3 pieces.

Something like that:
IMG_20180517_131251.jpg
by grusu
Mon Apr 23, 2018 2:43 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 161318

Re: Advisory: Vulnerability exploiting the Winbox port

What do do : 1) Firewall the Winbox port from the public interface, and from untrusted networks. It is best, if you only allow known IP addresses to connect to your router to any services, not just Winbox. We suggest this to become common practice. As an alternative, possibly easier, use the "IP ->...
by grusu
Tue Apr 03, 2018 8:38 pm
Forum: The User Manager
Topic: User Managger now available MMIPS, ARM HEX devices? [SOLVED]
Replies: 2
Views: 1107

Re: User Managger now available MMIPS, ARM HEX devices? [SOLVED]

User Manager is available in 6.42rc RouterOS version.
by grusu
Mon Mar 26, 2018 8:47 am
Forum: RouterBOARD hardware
Topic: Mode button on devices
Replies: 2
Views: 2291

Re: Mode button on devices

Hi, I have a question what is the mode button on the routers (for example at top of RB 941) - foto in attachment When I press the button, there is no action (default and empty configuration). Thank you in advance for your help I have tested on cAP AC in 6.42 RouterOS version and it works: /system r...
by grusu
Sat Mar 24, 2018 9:18 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 31197

Re: v6.41.3 [current]

Hi, just bricked two of my three RB962UiGS-5HacT2HnT by upgrading from 6.41.2 to 6.41.3. I did the following steps - as I did with the last update: 1. uploaded routeros-mipsbe-6.41.3.npk 2. reboot 3. uploaded active modules - advanced-tools-6.41.3-mipsbe.npk - dhcp-6.41.3-mipsbe.npk - ipv6-6.41.3-m...
by grusu
Wed Mar 14, 2018 9:25 pm
Forum: Wireless Networking
Topic: What it means "Channel Width 20/40/80MHz XXXX"
Replies: 3
Views: 2569

Re: What it means "Channel Width 20/40/80MHz XXXX"

I am referring to this:
xxxx.PNG
xx_xxx.PNG
by grusu
Wed Mar 14, 2018 9:14 am
Forum: Wireless Networking
Topic: What it means "Channel Width 20/40/80MHz XXXX"
Replies: 3
Views: 2569

What it means "Channel Width 20/40/80MHz XXXX"

I have found this feature in RouterOS v. 6.42rc41 on cAP AC.

Thanks!
by grusu
Wed Mar 14, 2018 8:47 am
Forum: RouterBOARD hardware
Topic: CAP ac bad Antenna design?
Replies: 95
Views: 21298

Re: CAP ac bad Antenna design?

Distance is already set "indoors" and, if I try to set Tx Power to "manual" or "card rates" does not work. Only the "all rates fixed" option seems to work. I have better performance but only in 2.4GHz if I disable the 5GHz interface. For 5GHz I have no improvement even if I set Tx Power at 17dBm. In...
by grusu
Tue Mar 13, 2018 3:55 pm
Forum: RouterBOARD hardware
Topic: When will MikroTik hAP ac2 be released?
Replies: 20
Views: 2144

Re: When will MikroTik hAP ac2 be released?

You can use localy available power supply instead of the packed one. You can also request your local dealer to solve the problem if the plug type doesn't correspond to your local regulations. I haven't thought of buying a locally available power supply, but that could work. However, I think buying ...
by grusu
Tue Mar 13, 2018 10:26 am
Forum: RouterBOARD hardware
Topic: CAP ac bad Antenna design?
Replies: 95
Views: 21298

Re: CAP ac bad Antenna design?

For all you have trouble with wireless throughput please check if have both chains checked on wifi interfaces.
I found when I configured cAP AC set as follows:
cAP AC.PNG
However, with the two chains checked, the speed is smaller than it should. I hope this will improve in future RouterOS versions.
by grusu
Tue Feb 27, 2018 10:21 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM Max Power consumption [SOLVED]
Replies: 1
Views: 618

Re: CRS328-24P-4S+RM Max Power consumption [SOLVED]

CRS328-24P-4S+RM is POE Out switch. Is the maximum power consumption of the switch with all ports active and POE Out ON (but no POE devices connected).

POE OUT consumption can be up to 450W in accordance with Quick Guide:
https://i.mt.lv/routerboard/files/15196 ... lus-qg.pdf
by grusu
Fri Sep 08, 2017 9:02 am
Forum: General
Topic: Files erased from Flash after reboot
Replies: 4
Views: 3250

Re: Files erased from Flash after reboot

This type of equipment has only 16MB of flash. Everything you save in "/" is actually saved in RAM in fact. If you want to keep files save them in "/flash" but be careful that the space is limited.
Or add a USB stick and save it there.
by grusu
Sat Jul 22, 2017 12:17 pm
Forum: Wireless Networking
Topic: radar detected problems
Replies: 47
Views: 18110

Re: radar detected problems

I have a client to whom I have built wireles solution with APs from Mikrotik. With new RouterOS versions it was not possible to make a setup that works. The company is in a hall next to which is a tower full of apartments and so many wireless networks. Mikrotik AOsalways detects radars and trying to...
by grusu
Fri Jul 14, 2017 1:31 pm
Forum: Announcements
Topic: SwOS version 2.4 released!
Replies: 3
Views: 3058

Re: SwOS version 2.4 released!

Hi becs,

When I try to upgrade CSS326-24G-2S+RM from the interface, the "Download & Upgrade" button is grayed out and Latest Available Version is 2.5rc2.

Best regards,
Geo
by grusu
Tue Feb 21, 2017 3:49 pm
Forum: General
Topic: Exclude MAC from DHCP
Replies: 6
Views: 795

Re: Exclude MAC from DHCP

And you can use option 121 to set default route and gateway for client.
by grusu
Tue Feb 21, 2017 3:37 pm
Forum: General
Topic: Exclude MAC from DHCP
Replies: 6
Views: 795

Re: Exclude MAC from DHCP

Make lease static for that MAC and set "Block Access".
by grusu
Thu Jan 26, 2017 9:44 pm
Forum: Wireless Networking
Topic: wAP AC
Replies: 1
Views: 605

Re: wAP AC

http://wiki.mikrotik.com/wiki/Manual:Configuration_Management "The configuration backup can be used for backing up MikroTik RouterOS configuration to a binary file, which can be stored on the router or downloaded from it using FTP for future use. The configuration restore can be used for restoring t...
by grusu
Mon Dec 19, 2016 2:05 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 134317

Re: HAP AC

Hello everyone, i used Mikrotik devices over the last couple years and they have been very stable for me. My last configuration was my RB2011 as gateway and capsman in combination with a hAP Accesspoint. This configuration was stable but my neighbors seems to get a new wlan ap or printer every day ...
by grusu
Mon Dec 05, 2016 9:10 am
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 1705

Re: Firmware version

Hello, I don't know. I buy it to other person, maybe he could install RC.

Which is the stable firmware for this devices? Could I update it manually?

Best regards.

Which RouterOS version is on each SXT?
by grusu
Fri Oct 07, 2016 10:47 pm
Forum: RouterBOARD hardware
Topic: New CPU - new product RB750Gr3 - RB750G family - now mmips
Replies: 180
Views: 67405

Re: New CPU - new product RB750Gr3 - RB750G family - now mmips

It would be great! Can anyone from mikrotik confirm that?
You can see more clearly here:

http://www.roc-noc.com/images/D/rb750Gr3_l_1200px.png
by grusu
Fri Oct 07, 2016 8:43 pm
Forum: RouterBOARD hardware
Topic: New CPU - new product RB750Gr3 - RB750G family - now mmips
Replies: 180
Views: 67405

Re: New CPU - new product RB750Gr3 - RB750G family - now mmips

Exactly! 4g is best option for most people in Europe to get dual WAN failover. I can get 15gb for as low as 5€ /month.
I really can't understand lack of USB in 750 and 850gx2 (and sfp cage in this).

If you go back to the first post you will see a USB port in the photo.
by grusu
Tue Jul 26, 2016 9:28 am
Forum: SwOS
Topic: RB260GSP, but PoE options missing from web GUI
Replies: 15
Views: 5632

Re: RB260GSP, but PoE options missing from web GUI

Ps. Running OS 1.14.  I tried finding a download area to see if a newer firmware is available, but was unable to find it anywhere on your site.
http://www.mikrotik.com/download
You'll find below, in the SwitchOS section. Be sure to use right version.
by grusu
Wed Jul 20, 2016 1:03 pm
Forum: SwOS
Topic: Powering RB260GS from PoE
Replies: 1
Views: 879

Re: Powering RB260GS from PoE

http://routerboard.com/RB260GS You can use 9 - 30V power supply on eth 1 port. And yes,  RBGPOE do the work. I suggest you to use power supply with larger allowable voltage value (24 - 30V) so cable losses to be as small as possible. Anyway, 12V power supply included is quite enough to be used with ...
by grusu
Mon Jul 04, 2016 8:20 pm
Forum: Beginner Basics
Topic: PPTP traffic not triggering firewall rule???
Replies: 4
Views: 806

Re: PPTP traffic not triggering firewall rule???

maara,

Trust me and try what I said. Your PPTP clients connect to 192.168.3.1 which is an internal address of the router.
Traffic does not pass through forward chain.  I checked on one of my routers.
by grusu
Mon Jul 04, 2016 4:04 pm
Forum: Beginner Basics
Topic: PPTP traffic not triggering firewall rule???
Replies: 4
Views: 806

Re: PPTP traffic not triggering firewall rule???

If you want to block this type of traffic I think you have to block on input chain.
by grusu
Wed Jun 29, 2016 11:52 pm
Forum: Forwarding Protocols
Topic: Blacklisting SPAM
Replies: 21
Views: 14865

Re: Blacklisting SPAM

Even mikrotik routers are connecting out silently without telling you. It's not useless to have firewall rules in output chain.
Hi Jarda,
I absolutely agree with you. I have referred strictly to this case.
by grusu
Wed Jun 29, 2016 8:22 pm
Forum: Forwarding Protocols
Topic: Blacklisting SPAM
Replies: 21
Views: 14865

Re: Blacklisting SPAM

My mistake ... easy to fix if someone is following this thread add chain=output protocol=tcp dst-port=25,110,465...and_other+ports... action=add-src-to-address-list comment="add src smtp" add chain=forward protocol=tcp dst-port=25,110,465...and_other+ports... action=add-src-to-address-list comment=...
by grusu
Wed Jun 29, 2016 4:39 pm
Forum: Forwarding Protocols
Topic: Blacklisting SPAM
Replies: 21
Views: 14865

Re: Blacklisting SPAM

And you can have one rule combined for all add chain=udp protocol=tcp dst-port=25,110,465...and_other+ports... action=add-src-to-address-list comment="add src smtp" "chain=udp" is wrong. You can try to block spammers with rules like these: [color=black][font=monospace, Courier]/ip firewall filter[/...
by grusu
Tue Jun 14, 2016 2:50 pm
Forum: RouterBOARD hardware
Topic: RB3011UiAS-RM
Replies: 102
Views: 52199

Re: RB3011UiAS-RM

With the latest software update 6.36rc28 my RB3011 doesn't see any usb devices. With current version it works fine.
I can confirm. I tried with several USB device and does not work on 6.36rc28. All works fine in 6.35.4
by grusu
Tue Jun 07, 2016 8:24 am
Forum: Beginner Basics
Topic: Port Scan Blocking Firewall Rule not Working
Replies: 8
Views: 12125

Re: Port Scan Blocking Firewall Rule not Working

add chain=input protocol=tcp psd=21,3s,3,1 action=add-src-to-address-list address-list="port scanners" address-list-timeout=2w comment="Port scanners to list " disabled=no above rule is not working, when i apply this rule , my router became reobooted automatically. why? For me works the following r...
by grusu
Wed Jun 01, 2016 6:50 am
Forum: RouterBOARD hardware
Topic: SFP Module Speed Support
Replies: 2
Views: 699

Re: SFP Module Speed Support

Hi,

I'm sure this is captured somewhere, but I can't find it ... :(

What (maximum) speed of SPF does the RB260GS support?

Thanks!
http://i.mt.lv/routerboard/files/RB260G ... 112240.pdf
by grusu
Wed May 25, 2016 7:25 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65132

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Thank you grusu. You managed to answer before us and answer is completely correct.
Until now I have used a script to resolve the dynamic IP address from where I manage routers. Now it is much easier.
Thank you!
by grusu
Tue May 24, 2016 7:47 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65132

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!



How often is updated?
My question exactly :)
That's what I would like to know as well.
I will try to answer the question myself: I think the address is resolved at boot and when DNS TTL reaches 0 and is renew in cache.
by grusu
Tue May 24, 2016 11:30 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65132

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Version 6.36rc16 has been released.
*) firewall - allow to add domain name to address-lists (dynamic entries for resolved addresses will be added to specified list);
Nice!!!

How often is updated?
by grusu
Fri May 13, 2016 8:14 pm
Forum: Beginner Basics
Topic: No internet Access on LAN
Replies: 3
Views: 899

Re: No internet Access on LAN

On command prompt on your pc run "ipconfig /all" and come back with network settings.
by grusu
Tue May 03, 2016 10:57 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65132

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

notToNew - This is not LCD configuration but try to delete init-delay configuration and import afterwards. Does device on which you test import support init-delay and actually has firmware version with init-delay support? Starting with which firmware version supports init-delay? RouterBOOT_changelo...
by grusu
Mon Mar 28, 2016 9:05 am
Forum: Announcements
Topic: v6.34.3 [current] is released!
Replies: 58
Views: 15859

Re: v6.34.3 [current] is released!

On 2011UAS v6.34.3:

[admin@MikroTik-VF] > /system health print
voltage: 1106.5V

Same value in winbox.
Same after reboot.
by grusu
Sun Mar 27, 2016 11:37 pm
Forum: Scripting
Topic: Fun with fan.
Replies: 8
Views: 1217

Re: Fun with fan.

Seems to be permanent. I can't reboot just now to see if this solve the problem.
by grusu
Sun Mar 27, 2016 10:49 pm
Forum: Scripting
Topic: Fun with fan.
Replies: 8
Views: 1217

Re: Fun with fan.

On 2011UAS v6.34.3:

[admin@MikroTik-VF] > /system health print
voltage: 1106.5V
by grusu
Fri Feb 26, 2016 8:29 am
Forum: Announcements
Topic: MUM EUROPE 2016
Replies: 33
Views: 10204

Re: MUM EUROPE 2016

Yes, but not all.
by grusu
Fri Feb 26, 2016 8:20 am
Forum: Announcements
Topic: MUM EUROPE 2016
Replies: 33
Views: 10204

Re: MUM EUROPE 2016

Hi Normis,

If is possible, please put all the presentations online.

Thanks,
Geo
by grusu
Fri Feb 19, 2016 4:59 pm
Forum: Beginner Basics
Topic: MikroTik Graphing-Restrict LAN users from viewing!!!
Replies: 9
Views: 989

Re: MikroTik Graphing-Restrict LAN users from viewing!!!

There are two options. 1. change www server port in ip--> services , from winbox 2. drop from firewall access subnet to ip of mikrotik on port 80 but allow your ip Thanks for your advice. But my issue is I myself is a LAN user at home connected via PPPoE to my network. How can i view the graphs at ...
by grusu
Fri Feb 05, 2016 10:39 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 134317

Re: HAP AC

Why so? I have the hAP ac at home as my access point. In our country, we get speeds 100-500Mbit at home, so even just for an AP you need power. I also have a few devices with no WiFi, so the extra ports help. 500 Mbps at home?? That's it, I'm moving to Riga, Latvia!! :D We are starting to see speed...
by grusu
Thu Feb 04, 2016 10:12 pm
Forum: RouterBOARD hardware
Topic: Replace UBNT Toughswitch with RouterOS Device????
Replies: 16
Views: 1848

Re: Replace UBNT Toughswitch with RouterOS Device????

Try with 30V 2.5A power supply.
by grusu
Tue Jan 26, 2016 8:13 am
Forum: Beginner Basics
Topic: Marking Youtube Traffic
Replies: 8
Views: 7239

Re: Marking Youtube Traffic

Use layer 7 protocol to find youtube connections and mangle to mark them.
Or use layer 7 name direct in NAT rule.
by grusu
Thu Jan 21, 2016 11:05 am
Forum: RouterBOARD hardware
Topic: RB3011UiAS-RM
Replies: 102
Views: 52199

Re: RB3011UiAS-RM

Any news about the "Switch" menu in Winbox?
Did not even appear in the latest 6.34rc version.
by grusu
Mon Jan 18, 2016 9:16 am
Forum: General
Topic: Very specific v6.34rc20 - will not upgrade a bunch of my RB4xx units - about 30+/-
Replies: 8
Views: 1379

Re: Very specific v6.34rc20 - will not upgrade a bunch of my RB4xx units - about 30+/-

Hi rodneal,

6.34rc20 was buggy version.

You will have to use Netinstall to install a good version of routeros.
by grusu
Fri Dec 18, 2015 9:54 pm
Forum: Wireless Networking
Topic: RB951G: increasing hw retries fixed slow downloads on my new Asus Zenfone 2
Replies: 1
Views: 1199

Re: RB951G: increasing hw retries fixed slow downloads on my new Asus Zenfone 2

On all my wifi Mikrotik router Hw. retries is default set to 7.
by grusu
Fri Dec 18, 2015 1:40 pm
Forum: RouterBOARD hardware
Topic: RB3011UiAS-RM
Replies: 102
Views: 52199

Re: RB3011UiAS-RM

IPsec accelerator support for RB3011 is still being worked on, the HW acceleration is not yet supported for this model. The CPU is much faster than RB2011 even without HW accelerator.
But HW acceleration will be supported in the near future?
by grusu
Thu Dec 17, 2015 3:06 pm
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 201
Views: 43304

Re: 6.34 release candidate version topic!

I try to update on RB951G-2HnD test echipament from 6.34rc20 but with no success.
I find "System rebooted because of kernel failure" message on log.
New packages: routeros-mipsbe-6.34rc22.npk and ntp-6.34rc22-mipsbe.npk is on router file system.
by grusu
Wed Dec 02, 2015 4:49 pm
Forum: RouterBOARD hardware
Topic: MB Asrock N3150M can't see USB devices
Replies: 1
Views: 455

Re: MB Asrock N3150M can't see USB devices

I believe is a driver problem.
by grusu
Wed Dec 02, 2015 1:49 pm
Forum: RouterBOARD hardware
Topic: MB Asrock N3150M can't see USB devices
Replies: 1
Views: 455

MB Asrock N3150M can't see USB devices

Hi,

I tried to install RouterOS on MB Asrock N3150M on USB Stick with no luck.
Finally I managed to install RouterOS on SSD but can't see any devices connected to USB.
Is there any way that I can see the USB devices?

Thanks,
Geo
by grusu
Tue Dec 01, 2015 6:49 pm
Forum: General
Topic: pptp client
Replies: 11
Views: 1371

Re: pptp client

I'm glad I could help you.
by grusu
Wed Nov 25, 2015 8:15 pm
Forum: General
Topic: pptp client
Replies: 11
Views: 1371

Re: pptp client

You did the right settings in IP > DNS on Mikrotik router?
Run in terminal in your Mikrotik router "ping url.xx" where url.xx is URL address of your PPTP server to see if is resolved correctly.
by grusu
Wed Nov 25, 2015 9:16 am
Forum: General
Topic: pptp client
Replies: 11
Views: 1371

Re: pptp client

On Mikrotik from where you try to connect, try the in terminal if that URL is solved correctly.
by grusu
Thu Oct 22, 2015 9:37 am
Forum: Scripting
Topic: Restart up to 16 AP's with one script ?
Replies: 8
Views: 1184

Re: Restart up to 16 AP's with one script ?

You can make a script on master router and send remote command like here:

http://wiki.mikrotik.com/wiki/Manual:Sy ... e_commands
by grusu
Sat Jul 11, 2015 12:17 am
Forum: General
Topic: RouterOS 6.30rc17
Replies: 12
Views: 3142

Re: RouterOS 6.30rc17

/ip ssh set strong-crypto
by grusu
Wed May 27, 2015 4:56 pm
Forum: General
Topic: v6.29 will be released this week!
Replies: 65
Views: 13417

Re: v6.29 will be released this week!

6.29 version seems to be ready:
http://demo.mt.lv/
by grusu
Wed May 13, 2015 9:13 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62032

Re: RouterOS v6.28 released

Link for capsmanv2: http://www.mikrotik.com/download/share/wireless-cm2-6.29rc18-mipsbe.npk Change "mispbe" with you router architecture. THX alot! there are you get this? any archive or beta page with list of stuffs, or you simply write it with own logic? :) The information I got from another foru...
by grusu
Wed May 13, 2015 5:21 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62032

Re: RouterOS v6.28 released

CAPsMAN v1 works fine if you have separate device for CAPsMAN and separate wireless devices, but if you are using for CAPsMAN router with wireless, it won't allow packets between wireless interface and other interfaces on this router. This bug apparently is corrected in v2. There is no exact mentio...