Community discussions

MUM Europe 2020

Search found 7 matches

by reinierk
Wed Oct 30, 2013 12:27 pm
Forum: Scripting
Topic: Hotspot $(radius<id>) variables broken again?
Replies: 6
Views: 2531

Re: Hotspot $(radius<id>) variables broken again?

The ONLY syntax accepted is radius<id>-<vendor> for example: 3com attribute 3Com-Product-ID should be coded as radius255-43 Where 255 is the attribute number from the 3Com dictionary and 43 is the VENDOR id of 3Com. Standard attributes should be coded with VENDOR 0. For example standard Connect-Info...
by reinierk
Tue Oct 29, 2013 12:06 pm
Forum: General
Topic: LLDP
Replies: 126
Views: 44030

Re: LLDP

Yes I was also very surprised to learn that LLDP is not supported....

So Mikrotik, Please implement it!
LLDP +1 !
by reinierk
Fri Aug 16, 2013 12:26 pm
Forum: Beginner Basics
Topic: help me please
Replies: 9
Views: 1437

Re: help me please

Is is raining/foggy in the area? WiFi 2.4Ghz is attenuated by moisture in the air. 5Ghz Wifi is less prone to this.
by reinierk
Fri Aug 16, 2013 12:17 pm
Forum: Beginner Basics
Topic: help me please
Replies: 9
Views: 1437

Re: help me please

try to use directional antennas: http://www.radiolabs.com/Articles/wifi-antenna.html This will dim the other AP's in the area.
by reinierk
Fri Aug 16, 2013 12:08 pm
Forum: Beginner Basics
Topic: help me please
Replies: 9
Views: 1437

Re: help me please

I would run Wireless-> Frequency usage, and choose a channel with low usage if at all possible. In some areas there are just too many AP's so WiFi gets quite useless. Cables are always better!
by reinierk
Fri Aug 16, 2013 11:25 am
Forum: Beginner Basics
Topic: help me please
Replies: 9
Views: 1437

Re: help me please

Is your problem poor WiFi reception?
Are there 20 accesspoints in the neighbourhood?
by reinierk
Fri Aug 16, 2013 11:23 am
Forum: General
Topic: Bridge tagged and untagged traffic separate
Replies: 1
Views: 458

Bridge tagged and untagged traffic separate

I am trying to bridge untagged (native vlan) traffic and tagged traffic from a Ubiqity WiFi radio. The untagged traffic is for managing the radio, the tagged traffic contains user-data from the SSIDs on the radio. I have the vlan defined on ethernet-2. Then I have two bridges: bridge-hs-mngt and bri...