Community discussions

MUM Europe 2020

Search found 28 matches

by kashifmac2005
Fri Feb 14, 2014 11:51 am
Forum: Wireless Networking
Topic: external antenna on RB951G-2HnD
Replies: 3
Views: 3029

Re: external antenna on RB951G-2HnD

Hi There, Maybe a open door question. I'm looking now for more then 20 minutes to find out if there is a possibility to connect external WIFI antenna on te RB951G-2HnD. Inside on the print there are two U.FL like connectors near by the antenna. I have read that the are for test purposes however thi...
by kashifmac2005
Thu Jan 30, 2014 10:22 am
Forum: General
Topic: v6.8 pre-release (RC)
Replies: 44
Views: 5549

Re: 6.8

Fix will be released today? Thanks
Depends on how long we need to test all the devices
Please take your time and make more stable version
by kashifmac2005
Tue Jan 28, 2014 6:48 am
Forum: General
Topic: UDP attack port 53 need good solution
Replies: 5
Views: 6426

Re: UDP attack port 53 need good solution

It's just an DDoS attack. The attacker sends DNS Request, that are resolved by your router. This results in big traffic for the target Machine, so the machine that is SOA of the DNS target (hundreds of this open resolvers get used for this). Regards, redflag237 Sir any powerful solution for this be...
by kashifmac2005
Fri Jan 24, 2014 9:12 am
Forum: General
Topic: UDP attack port 53 need good solution
Replies: 5
Views: 6426

Re: UDP attack port 53 need good solution

It's just an DDoS attack. The attacker sends DNS Request, that are resolved by your router. This results in big traffic for the target Machine, so the machine that is SOA of the DNS target (hundreds of this open resolvers get used for this). Regards, redflag237 Sir any powerful solution for this be...
by kashifmac2005
Thu Jan 23, 2014 12:19 pm
Forum: General
Topic: UDP attack port 53 need good solution
Replies: 5
Views: 6426

UDP attack port 53 need good solution

Dear all, I am receiving UDP attack on port 53 for reference snapshot is attached right now for this i am using drop rule but problem is that my router is continuously dropping packets since last night and still doing this i dont know why this attack is not finished yet and what kind of attack is th...
by kashifmac2005
Sat Jan 18, 2014 9:27 am
Forum: General
Topic: Port Forward/Nat
Replies: 11
Views: 2180

Re: Port Forward/Nat

Hello all I am trying to do I guess is a port forward on a RB2011 to setup a FreePBX here is kind of what I have setup. Ether1=1.0.0.1 wan Ether2=10.0.0.1 lan Ether1=1.0.0.2 voip Local Address for FreePBX 10.0.0.10 IP/Firewall/NAT Chain=dstnat Dst Address=1.0.0.2 Action=dst nat to address = 10.0.0....
by kashifmac2005
Fri Nov 29, 2013 7:08 am
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 50632

Re: Winbox for android, when?

The main difference in safety, I have completely closed for 80 port to device. Allowed only winbox connection . To use webfig, I need to keep port 80 open. This is not acceptable. lolz What kind of nobleness is this. On custom port i am using webfig on android easily and happy with that and i also ...
by kashifmac2005
Fri Oct 25, 2013 7:58 am
Forum: Beginner Basics
Topic: How to exclude traffic limit from LAN
Replies: 3
Views: 2224

Re: How to exclude traffic limit from LAN

Hi Everyone ! Hopes all of you doing great. I am having a problem while implementing the simple Queues. I have not set any authentication yet, only set the simple queues for the client, but i am having a problem that when client try to access the PRINTER/SCANNER or try to share the folder with othe...
by kashifmac2005
Tue Oct 08, 2013 8:07 am
Forum: General
Topic: NAT Protection
Replies: 2
Views: 936

Re: NAT Protection

Check if the attack is saturating all your bandwidth. In that case there few little things you can do.
yes brother this is the main issue i am facing
by kashifmac2005
Mon Oct 07, 2013 3:04 pm
Forum: General
Topic: NAT Protection
Replies: 2
Views: 936

NAT Protection

Hi everyone, I need some protection guidelines regarding NAT port forwarding. I hosted a game server on xyz port using src address list because i allowed only my country by adding mycountry classes in address list and blocked rest of countries and i also drop all traffic in IP firewall rule. I am us...
by kashifmac2005
Mon Oct 07, 2013 8:16 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 25178

Re: 2 different interface with 2 subnet : make them talk...

Hi
Have you this sorted out as I have a similar problem
Thanks
plz share your router settings which includes interface, firewall and routes
by kashifmac2005
Thu Oct 03, 2013 8:37 am
Forum: RouterBOARD hardware
Topic: New - RB951G-2HnD
Replies: 68
Views: 100310

Re: New - RB951G-2HnD

Neither. Those are wreless test points, for factory use. End user has no use for them. Hi! I found the connector name is: MS-156C. This really not only a connector, it is also an RF switch. This is the pdf for the connector: http://www.mouser.com/ds/2/185/e35802512-26831.pdf And this is a method fo...
by kashifmac2005
Mon Sep 30, 2013 7:37 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 290
Views: 309356

Re: Realtime per IP Mikrotik traffic monitor for home/office

Hi there Mikrotik fans! I have something to share that I've been working on for the office. When the Internet seems slow I like to be able to see who is doing what, and that is what this little Windows app does. It looks like this: brother is there any solution for realtime traffic monitor for LAN ...
by kashifmac2005
Fri Sep 27, 2013 3:48 pm
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 290
Views: 309356

Re: Realtime per IP Mikrotik traffic monitor for home/office

Hi there Mikrotik fans! I have something to share that I've been working on for the office. When the Internet seems slow I like to be able to see who is doing what, and that is what this little Windows app does. It looks like this: brother is there any solution for realtime traffic monitor for LAN ...
by kashifmac2005
Tue Sep 17, 2013 8:10 pm
Forum: Beginner Basics
Topic: Share 1 Gateway for 2 subnet
Replies: 7
Views: 1799

Re: Share 1 Gateway for 2 subnet

brother your setting concept is correct but if you are using terminal then verify your gateway interface name because in ip address interface name is ether1 but in nat rule at out-interface name is Ether1-gateway maybe you mentioned "-gateway" for explanation. Hello to all, /ip address add address =...
by kashifmac2005
Tue Sep 17, 2013 6:13 pm
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 25178

Re: 2 different interface with 2 subnet : make them talk...

winbox but i also use the terminal inside winbox
brother for you i would suggest to use winbox and i can help you on skype and also on teamviewer if you would like
by kashifmac2005
Mon Sep 16, 2013 8:38 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 25178

Re: 2 different interface with 2 subnet : make them talk...

brother when you assign ip address to interfaces router creates default routes automatically for talking to each other in /ip route and second thing i would love to give you config but right now i did not have spare router to make configuration as per your requirement btw are you using winbox or ter...
by kashifmac2005
Fri Sep 13, 2013 2:54 pm
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 25178

Re: 2 different interface with 2 subnet : make them talk...

Brother if you are still facing problem my advice to you is do configuration manually from scratch mean don't wile resetting router don't use default configuration then configure interfaces without bridging and check if works then create bridge and check just go thru troubleshooting way step by step
by kashifmac2005
Thu Sep 12, 2013 9:56 am
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 25178

Re: 2 different interface with 2 subnet : make them talk...

/interface bridge add admin-mac=D4:CA:6D:E6:24:A7 auto-mac=no l2mtu=1598 name=bridge-local \ protocol-mode=rstp add name=bridge-local-2 brother i think your bridge configuration not correct btw why you are using rstp protocol and ARP setting also missing please add simple bridge with no protocol an...
by kashifmac2005
Wed Sep 11, 2013 2:41 pm
Forum: General
Topic: 2 different interface with 2 subnet : make them talk...
Replies: 32
Views: 25178

Re: 2 different interface with 2 subnet : make them talk...

Hi, My problem seems simple, if anyone could help there please :) I have an interface ETH2 with address 192.168.141.254 on a /24 subnet and a ETH3 with address 192.168.142.254 on a /24 Both have dhcp etc. I can't make a computer from the 141 subnet ping one from the 142 and same the other way. Coul...
by kashifmac2005
Mon Sep 09, 2013 8:04 am
Forum: Beginner Basics
Topic: Need To Forward Port!!
Replies: 6
Views: 2261

Re: Need To Forward Port!!

Nope Bro i tried but didn't work think there is some problem the NAT i create dosen't have packets :( feeling sad
mmmm bro check your firewall on server machine btw which OS using you are on server side?
by kashifmac2005
Sat Sep 07, 2013 7:57 am
Forum: Beginner Basics
Topic: Need To Forward Port!!
Replies: 6
Views: 2261

Re: Need To Forward Port!!

Not Working Please help me!! My satic IP: 192.168.203.27 really sorry i thought you mentioned WAN Static IP but it is LAN local server right? if yes put WAN ip as dst-address and i think your wan ip is 123.136.25.134 like /ip firewall nat add chain=dstnat action=netmap to-addresses=192.168.203.27 t...
by kashifmac2005
Fri Sep 06, 2013 9:29 am
Forum: Beginner Basics
Topic: Need To Forward Port!!
Replies: 6
Views: 2261

Re: Need To Forward Port!!

Need To Open Port : tcp- 27015-27020 udp-1200 udp- 27000-27015 My satic IP: 192.168.203.27 ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; WAN 123.136.25.134/30 123.136.25.132 Wan 1 ;;; LAN 192.168.203.1/24 192.168.203.0 Lan 2 103.15.165.186/29 103.1...
by kashifmac2005
Tue Aug 27, 2013 7:49 am
Forum: Beginner Basics
Topic: DDWRT IPTables firewall to mikrotik help
Replies: 3
Views: 1288

Re: DDWRT IPTables firewall to mikrotik help

try this /ip firewall nat add action=src-nat chain=srcnat disabled=no dst-address=1.5.0.0/20 out-interface=vlan2 to-addresses=1.5.101.23 Brother thanks alot with help of this rule and adding one mangle rule now my service is working perfect. karma given @MOD Problem solved please close this post if...
by kashifmac2005
Mon Aug 26, 2013 10:24 am
Forum: General
Topic: Block Ip address
Replies: 6
Views: 2317

Re: Block Ip address

Dear All, Could you please help me. I'm using RouterBoard 750, 2.38. I connect all my computers 192.168.1.1/24 with port1. I wonder if I want to block computer A 192.168.1.10/24 to communicate with computer B 192.168.1.11/24 it's possible to do that? Please help!!! Thank you Brother for this kind o...
by kashifmac2005
Mon Aug 26, 2013 9:50 am
Forum: Beginner Basics
Topic: DDWRT IPTables firewall to mikrotik help
Replies: 3
Views: 1288

Re: DDWRT IPTables firewall to mikrotik help

try this

/ip firewall nat
add action=src-nat chain=srcnat disabled=no dst-address=1.5.0.0/20 out-interface=vlan2 to-addresses=1.5.101.23
thanks alot brother will try this and update status
by kashifmac2005
Fri Aug 23, 2013 2:36 pm
Forum: Beginner Basics
Topic: help... 3 days with no sleep already!!!
Replies: 5
Views: 1272

Re: help... 3 days with no sleep already!!!

Hi All, I have a bit of an issue. Currently I use a RB911G to connect to a highsite-Backbone connection. and then I have a RB433 linking to my sector and PC. So basically this is my setup at the moment. The RB 911 is connected via wireless connection to the Highsite with the following configuration...
by kashifmac2005
Thu Aug 22, 2013 9:56 pm
Forum: Beginner Basics
Topic: DDWRT IPTables firewall to mikrotik help
Replies: 3
Views: 1288

DDWRT IPTables firewall to mikrotik help

Dear Team, Today i shifted to Mikrotik platform previously i was using DDWRT on linksys-E2000 and my ISP was giving me VOD service on it with using some scripts in DDWRT commands to divide the internet and vod traffic on router which are below ifconfig vlan2 1.5.101.23 netmask 255.255.252.0 route ad...