Hi There, Maybe a open door question. I'm looking now for more then 20 minutes to find out if there is a possibility to connect external WIFI antenna on te RB951G-2HnD. Inside on the print there are two U.FL like connectors near by the antenna. I have read that the are for test purposes however thi...

Fix will be released today? Thanks

Depends on how long we need to test all the devices

Please take your time and make more stable version

It's just an DDoS attack. The attacker sends DNS Request, that are resolved by your router. This results in big traffic for the target Machine, so the machine that is SOA of the DNS target (hundreds of this open resolvers get used for this). Regards, redflag237 Sir any powerful solution for this be...

It's just an DDoS attack. The attacker sends DNS Request, that are resolved by your router. This results in big traffic for the target Machine, so the machine that is SOA of the DNS target (hundreds of this open resolvers get used for this). Regards, redflag237 Sir any powerful solution for this be...

Dear all, I am receiving UDP attack on port 53 for reference snapshot is attached right now for this i am using drop rule but problem is that my router is continuously dropping packets since last night and still doing this i dont know why this attack is not finished yet and what kind of attack is th...

Hello all I am trying to do I guess is a port forward on a RB2011 to setup a FreePBX here is kind of what I have setup. Ether1=1.0.0.1 wan Ether2=10.0.0.1 lan Ether1=1.0.0.2 voip Local Address for FreePBX 10.0.0.10 IP/Firewall/NAT Chain=dstnat Dst Address=1.0.0.2 Action=dst nat to address = 10.0.0....

The main difference in safety, I have completely closed for 80 port to device. Allowed only winbox connection . To use webfig, I need to keep port 80 open. This is not acceptable. lolz What kind of nobleness is this. On custom port i am using webfig on android easily and happy with that and i also ...

Hi Everyone ! Hopes all of you doing great. I am having a problem while implementing the simple Queues. I have not set any authentication yet, only set the simple queues for the client, but i am having a problem that when client try to access the PRINTER/SCANNER or try to share the folder with othe...

Check if the attack is saturating all your bandwidth. In that case there few little things you can do.

yes brother this is the main issue i am facing

Hi everyone, I need some protection guidelines regarding NAT port forwarding. I hosted a game server on xyz port using src address list because i allowed only my country by adding mycountry classes in address list and blocked rest of countries and i also drop all traffic in IP firewall rule. I am us...

Hi
Have you this sorted out as I have a similar problem
Thanks

plz share your router settings which includes interface, firewall and routes

Neither. Those are wreless test points, for factory use. End user has no use for them. Hi! I found the connector name is: MS-156C. This really not only a connector, it is also an RF switch. This is the pdf for the connector: http://www.mouser.com/ds/2/185/e35802512-26831.pdf And this is a method fo...

Hi there Mikrotik fans! I have something to share that I've been working on for the office. When the Internet seems slow I like to be able to see who is doing what, and that is what this little Windows app does. It looks like this: brother is there any solution for realtime traffic monitor for LAN ...

Hi there Mikrotik fans! I have something to share that I've been working on for the office. When the Internet seems slow I like to be able to see who is doing what, and that is what this little Windows app does. It looks like this: brother is there any solution for realtime traffic monitor for LAN ...

brother your setting concept is correct but if you are using terminal then verify your gateway interface name because in ip address interface name is ether1 but in nat rule at out-interface name is Ether1-gateway maybe you mentioned "-gateway" for explanation. Hello to all, /ip address add...

winbox but i also use the terminal inside winbox

brother for you i would suggest to use winbox and i can help you on skype and also on teamviewer if you would like

brother when you assign ip address to interfaces router creates default routes automatically for talking to each other in /ip route and second thing i would love to give you config but right now i did not have spare router to make configuration as per your requirement btw are you using winbox or ter...

Brother if you are still facing problem my advice to you is do configuration manually from scratch mean don't wile resetting router don't use default configuration then configure interfaces without bridging and check if works then create bridge and check just go thru troubleshooting way step by step

/interface bridge add admin-mac=D4:CA:6D:E6:24:A7 auto-mac=no l2mtu=1598 name=bridge-local \ protocol-mode=rstp add name=bridge-local-2 brother i think your bridge configuration not correct btw why you are using rstp protocol and ARP setting also missing please add simple bridge with no protocol an...

Hi, My problem seems simple, if anyone could help there please :) I have an interface ETH2 with address 192.168.141.254 on a /24 subnet and a ETH3 with address 192.168.142.254 on a /24 Both have dhcp etc. I can't make a computer from the 141 subnet ping one from the 142 and same the other way. Coul...

Nope Bro i tried but didn't work think there is some problem the NAT i create dosen't have packets feeling sad

mmmm bro check your firewall on server machine btw which OS using you are on server side?

Not Working Please help me!! My satic IP: 192.168.203.27 really sorry i thought you mentioned WAN Static IP but it is LAN local server right? if yes put WAN ip as dst-address and i think your wan ip is 123.136.25.134 like /ip firewall nat add chain=dstnat action=netmap to-addresses=192.168.203.27 t...

Need To Open Port : tcp- 27015-27020 udp-1200 udp- 27000-27015 My satic IP: 192.168.203.27 ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; WAN 123.136.25.134/30 123.136.25.132 Wan 1 ;;; LAN 192.168.203.1/24 192.168.203.0 Lan 2 103.15.165.186/29 103.1...

try this /ip firewall nat add action=src-nat chain=srcnat disabled=no dst-address=1.5.0.0/20 out-interface=vlan2 to-addresses=1.5.101.23 Brother thanks alot with help of this rule and adding one mangle rule now my service is working perfect. karma given @MOD Problem solved please close this post if...

Dear All, Could you please help me. I'm using RouterBoard 750, 2.38. I connect all my computers 192.168.1.1/24 with port1. I wonder if I want to block computer A 192.168.1.10/24 to communicate with computer B 192.168.1.11/24 it's possible to do that? Please help!!! Thank you Brother for this kind o...

try this

/ip firewall nat
add action=src-nat chain=srcnat disabled=no dst-address=1.5.0.0/20 out-interface=vlan2 to-addresses=1.5.101.23

thanks alot brother will try this and update status

Hi All, I have a bit of an issue. Currently I use a RB911G to connect to a highsite-Backbone connection. and then I have a RB433 linking to my sector and PC. So basically this is my setup at the moment. The RB 911 is connected via wireless connection to the Highsite with the following configuration...

Dear Team, Today i shifted to Mikrotik platform previously i was using DDWRT on linksys-E2000 and my ISP was giving me VOD service on it with using some scripts in DDWRT commands to divide the internet and vod traffic on router which are below ifconfig vlan2 1.5.101.23 netmask 255.255.252.0 route ad...