In addition to the agenda, i wonder if anyone could attach M.2 wireless cards to the RBM33G board? Is it possible?
Im NOT talking about any storages/hard drives, im talking about wireless cards, just like: this one
The wiki page lacks info about any suitable M.2 cards.

Another method might be to define all of 10.0.0.1's physical interface addresses as radius servers in the clients and let them work like "primary/backup radius server pool" on the clients. Never tried doing that way. Honestly even had no such thoughts. It might work I believe, thank you f...

I would not say that was a solution, but it had suited me well and im no longer have such problems.

@gius64 fortunately i did! You always have to set the Radius Server address as the real interface address, not the loopbacks addresses. The actual data usually goes between real addresses and NOT between loopback address. I have enourmous network with lots of addresses. The radius server has loopbac...

Bump! The problem still exists! I was wondering if anyone dont have such problems???

I would have made request to support if anyone had confirmed or denied this behavior. So, anyone please?

Tests were made at 6.18, 6.17. Various hardwares and platforms: mipsbe, ppc. The same problem exists: no possibility to add new IPSec policy rule using winbox. Only console allows to do.
Same thing happened every time I've tried.

I wonder if nobody really have solved such issue?

For machines from LAN behind router: /ip firewall filter add chain=forward dst-address=1.1.1.1 dst-port=53 protocol=udp action=accept /ip firewall filter add chain=forward dst-address=2.2.2.2 dst-port=53 protocol=udp action=accept /ip firewall filter add chain=forward dst-port=53 protocol=udp action...

Your devices' interfaces addresses are in 192.168.6.0/24 network, but backbone network at MT set as 192.168.7.0/24. If it is not misprint, you should change backbone network.

I have following configuration for simplicity: 1) Core MT RB1100AHx2 RouterOS 6.6 as openvpn server with address 172.31.1.1/32 and also loopback bridge 10.0.0.1/32. 2) RB 951-2n RouterOS 6.7 as vpn client with address 172.31.1.2/32 and loopback bridge 10.13.13.1/24. There is DHCP network for local c...

I can confirm unxpected behavior as of http://forum.mikrotik.com/viewtopic.php?f=19&t=79489&start=50#p399557 I have a RB1100AHx2 as openvpn server and after 6.6=>6.7 upgrade a lot of connections have not been able to work. Problems also have been noticed with PPTP server at the same router. ...

My question is quite simple. There is no explicit list of supported encryption modes. I was told the device apparently supports AES 128 ONLY, neither 192 nor 256 and so on. Is it true? Should I use this mode only to be sure hardware encryption will be enabled?

Im using RouterOS 6.2 at RB1100AHx2. As of new features of 6.x i am trying to manage certificates with self-signed CA. But i cant complete the first stage: /certificate ca create-self-signed-ca common-name="common-name" country="Russia" crl=1.2.3.4 days-valid=365 email="test...