Had similar problem. Was running RouterOS 4.4 successfully for 2 weeks in NSTREME mode. All of sudden got alot of disconnects and bad quality and througput. Link started dropping about every 10 minutes (but only under big load). Seems to be fine when not being hammered. Downgraded to RouterOS 3.30. ...
Tried both sides TX cards at 6 fixed rates and card rates, but link doesnt come up. I played around with higher values, but also no luck. Back to defaults and link up again. This one got me stumped.
Lowered the tx power of the main site transmitting card to 6 first. Nstreme Dual connectivity died. Tried going up in 1's - link only came alive again when i reached 15 power on the main site. Left it at 15 and connected to remote site. When i set the transmitting cards tx power to 15 there, i lost ...
Hi. Please see attachment for the Nstreme Dual configuration. Both wireless cards on either end have been put in nstreme dual slave mode. Wireless cards running on same frequency as allocated on nstreme dual tab. Using same SSID for both wireless cards per station. Also tried different SSID's - does...
Hi Using Mikrotik v2.9.24. I've enable the RADIUS MAC authentication under the wireless security profile. This sends the mac address as a username to my freeradius server and blank password. Authentication is happening from my wireless clients, but i'm getting no accounting from the session. Only if...
Thanks for the reply Eugene. But still doesn't make sense to me. Static routes that i've added works on Destination IP address. Doesn't care where the packet orginates from (source). On the Mikrotik1 router i can ping devices everywhere (even devices sitting behind the Mikrotik2 router). The ping fr...
Hi Guys Have 2 mikrotiks setup wirelessly over a 15km link. Registration is good and communication working fine. Using no Firewall rules or Routing protocols. Got all the routes as static routes. IP address on Miktrotik1-wlan is 192.168.50.254 and on Mikrotik2-wlan is 192.168.50.253. Got static rout...