Community discussions

MikroTik App

Search found 268 matches

by Arpanet
Mon Feb 05, 2018 11:13 am
Forum: Scripting
Topic: PHP Api by Vasil customization for web proxy
Replies: 6
Views: 1364

Re: PHP Api by Vasil customization for web proxy

@boen_robot

How to inspect $e?

thanks
by Arpanet
Fri Jan 19, 2018 3:43 pm
Forum: General
Topic: Routing Issue accross multiple LANs
Replies: 7
Views: 801

Re: Routing Issue accross multiple LANs

no firewall enabled in each rb3011
by Arpanet
Fri Jan 19, 2018 1:59 pm
Forum: General
Topic: Routing Issue accross multiple LANs
Replies: 7
Views: 801

Re: Routing Issue accross multiple LANs

RB3011 FROM MY OFFICE LAN: 0 192.168.1.62/24 199.168.1.0 bridge2 -->INTERNET GATEWAY 1 192.168.15.1/24 192.168.15.0 bridge1 -->OFFICE LAN 2 192.168.19.150/24 192.168.19.0 ether3 -->RB3011 192.168.19.1 3 192.168.18.150/24 192.168.18.0 ether9 -->RB3011 192.168.18.1 ROUTES: 0 A 0.0.0.0/0 192.168.1.1 ST...
by Arpanet
Fri Jan 19, 2018 12:00 pm
Forum: General
Topic: Routing Issue accross multiple LANs
Replies: 7
Views: 801

Routing Issue accross multiple LANs

I cannot find a routing table that works for accessing via winbox every single host in each lan from my office network.
As you can see there are multiple NAT layers.
Below network map:
Image
by Arpanet
Fri Jan 19, 2018 11:47 am
Forum: Scripting
Topic: SSH remote multiline commands
Replies: 4
Views: 1171

Re: SSH remote multiline commands

could it be a routeros version issue?
they are v6.36 and v6.38

no one?
by Arpanet
Wed Jan 17, 2018 4:03 pm
Forum: Scripting
Topic: SSH remote multiline commands
Replies: 4
Views: 1171

Re: SSH remote multiline commands

Tried
1)both global
2)$ipadd as global and $thisip as local
3) as 2 but viceversa

It does not work yet. :/
by Arpanet
Fri Jan 12, 2018 9:54 pm
Forum: Scripting
Topic: SSH remote multiline commands
Replies: 4
Views: 1171

SSH remote multiline commands

I am trying to autologin via SSH (DSA cert) and execute remote command. Below script check its current public ip, if it has been changed and auto-log into another router with cert already installed and it should add changed ip address into firewall address lists. It works fine except for ssh command...
by Arpanet
Fri Nov 03, 2017 12:35 am
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Re: Dual chain enabled and no bandwith NV2

The problem is DOUBLE CHAIN NO BANDWITH
by Arpanet
Thu Nov 02, 2017 10:43 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Re: Dual chain enabled and no bandwith NV2

As i said another identical link works logically with both chain
by Arpanet
Thu Nov 02, 2017 10:35 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Re: Dual chain enabled and no bandwith NV2

I should upgrade?
by Arpanet
Thu Nov 02, 2017 5:50 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Re: Dual chain enabled and no bandwith NV2

The same
by Arpanet
Tue Oct 31, 2017 10:15 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Re: Dual chain enabled and no bandwith NV2

No one?
by Arpanet
Mon Oct 30, 2017 10:14 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Re: Dual chain enabled and no bandwith NV2

Tx power default
Cattura.PNG
by Arpanet
Mon Oct 30, 2017 9:40 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 1472

Dual chain enabled and no bandwith NV2

I am going crazy. Point to Point Mikrotik bridge with Rocket Dish 30dbi and NetMetal5 dual chain. Enabling only one chain (chain0) in both radios I get 130Mbps If I enable both chains, I get only 30Mbps! Tried all protocols Nstreme,NV2,802.11 -> no result Tried different frequencies -> no result Tri...
by Arpanet
Sat Sep 02, 2017 1:13 pm
Forum: Scripting
Topic: PHP Api by Vasil customization for web proxy
Replies: 6
Views: 1364

Re: PHP Api by Vasil customization for web proxy

precious suggestions

thank you so much @boen_robot, you are a guru
by Arpanet
Fri Sep 01, 2017 4:36 pm
Forum: Scripting
Topic: PHP Api by Vasil customization for web proxy
Replies: 6
Views: 1364

Re: PHP Api by Vasil customization for web proxy

It works perfectly! It's a powerful tool thanks! 1) As last mod I want php to lookup into a txt file containing all customers names and ip addresses and put them into array; 2) Why do you suggest one router at time if addresses are into the array? 3) How can I add a success or fail message after run...
by Arpanet
Tue Aug 29, 2017 1:24 pm
Forum: Scripting
Topic: PHP Api by Vasil customization for web proxy
Replies: 6
Views: 1364

PHP Api by Vasil customization for web proxy

First thanks to @boen robot for his useful php api class. I need to create a script that search into a list of ip addresses (defaulting customers) then for each address, check if a rule is created, enable it or just create it as new: > ip firewall nat add chain=dstnat protocol=tcp port=80,8080,443 a...
by Arpanet
Thu Aug 17, 2017 7:52 pm
Forum: Scripting
Topic: Python API script command
Replies: 0
Views: 3123

Python API script command

I have successfully connected to mikrotik api using this python script: After running it I access api cli to send commands to the router. What I need is sending commands through the python script itself. So after a succesfull connection, script sends the commands that I need. How can I achieve that?...
by Arpanet
Thu Oct 08, 2015 8:16 pm
Forum: General
Topic: Set to scan only one frequency
Replies: 0
Views: 475

Set to scan only one frequency

I'm trying to set my radio to scan just one frequency. So I write down via terminal this command in routeros v.5.26: [admin@MikroTik] /interface wireless> add frequency=5520 scan-list=5520 master-interface: wlan1-gateway but this is what I get: failure: license level does not allow virtual AP What d...
by Arpanet
Sat Aug 15, 2015 5:02 pm
Forum: General
Topic: Multiple routerboards one queue counter
Replies: 0
Views: 337

Multiple routerboards one queue counter

I was asking if there's a way to pick queue values from different RB's and add them together into one main counter.

E.g.
1st routerboard: queues1
2nd routerboard: queues2
3rd routerboard: queues1+queues2
Is it possibile?
by Arpanet
Mon Aug 03, 2015 12:25 am
Forum: General
Topic: Log event and system uptime
Replies: 0
Views: 358

Log event and system uptime

System log shows message that router was rebooted without proper shutdown referring to an event 2 days old.

System uptime reveals another shutdown in another date but not shown in system log.

So I want to understand what exactly log writes and what system uptime refers to.
by Arpanet
Fri Jul 03, 2015 5:12 pm
Forum: General
Topic: Slow down user speed after a given amount of dl-ul bytes
Replies: 8
Views: 998

Re: Slow down user speed after a given amount of dl-ul bytes

how can I use ip address in target of simple queues if clients get ip via DHCP?

I have to make a list of ip addresses? Then set that list as target?
by Arpanet
Fri Jul 03, 2015 11:59 am
Forum: General
Topic: Slow down user speed after a given amount of dl-ul bytes
Replies: 8
Views: 998

Re: Slow down user speed after a given amount of dl-ul bytes

Every user connects to Ap and get Ip via DHCP.
Each of them got a default bandwith of 256k/2M.
If they download or upload e.g. 20Megabytes of data the script should search simple queues for that value and changes bandwith from 256k/2M to 32k/64k.

I hope I was clear
by Arpanet
Fri Jul 03, 2015 12:54 am
Forum: General
Topic: Slow down user speed after a given amount of dl-ul bytes
Replies: 8
Views: 998

Re: Slow down user speed after a given amount of dl-ul bytes

anyway your code has no sense.

you ask to find a target alreay specified
by Arpanet
Fri Jul 03, 2015 12:28 am
Forum: General
Topic: Slow down user speed after a given amount of dl-ul bytes
Replies: 8
Views: 998

Re: Slow down user speed after a given amount of dl-ul bytes

Do I need to specify ip address for each client? /queue simple print 3 name="device1" target=192.168.4.199/32 parent=none packet-marks=device1_pck_mark priority=8/8 queue=default-small/default-small limit-at=0/0 max-limit=256k/2M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s At the moment cli...
by Arpanet
Thu Jul 02, 2015 9:01 pm
Forum: General
Topic: Slow down user speed after a given amount of dl-ul bytes
Replies: 8
Views: 998

Slow down user speed after a given amount of dl-ul bytes

I created this script to automatically change users bandwith from 2Mbps to 64k via simple queues after they download/upload 20Megabytes of data on the internet. :local traf; /queue simple :for i from=192 to=206 do={ :if ([/queue simple find target=("192.168.4." . $i . "/24")] != "") do={ :set $traf ...
by Arpanet
Wed Jul 01, 2015 1:01 am
Forum: Scripting
Topic: Limiting user traffic to a given amount by simple queues
Replies: 1
Views: 717

Re: Limiting user traffic to a given amount by simple queues

when i run the script it says:
 system script run traffic_amount_limit 
expected end of command (line 3 column 167)
anyone could help me with debugging?
by Arpanet
Tue Jun 30, 2015 7:42 pm
Forum: Scripting
Topic: Limiting user traffic to a given amount by simple queues
Replies: 1
Views: 717

Limiting user traffic to a given amount by simple queues

I'm trying to make this script working: http://wiki.mikrotik.com/wiki/Limiting_a_user_to_a_given_amount_of_traffic_II In a few words I want to slow down users after they download/upload a given amount of data. Script is executed but does nothing. I changed few things to update code for new RouterOS ...
by Arpanet
Tue Jun 30, 2015 7:05 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Re: Static Routes accross different LANs

I suspect that your traffic between 192.168.1.0/24 and 192.168.6.0/24 is being blocked by rule #3. If you want bilateral communication, you need to create a filter rule that explicitly ALLOWS communication between those two subnets. The easiest thing to do would be to create an address list with bo...
by Arpanet
Tue Jun 30, 2015 4:34 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Re: Static Routes accross different LANs

anyone could help me?
by Arpanet
Mon Jun 29, 2015 9:19 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Re: Static Routes accross different LANs

0 ;;; default configuration chain=input action=accept protocol=icmp log=no log-prefix="" 1 chain=input action=accept protocol=tcp dst-port=8291 log=no log-prefix="" 2 ;;; default configuration chain=input action=accept connection-state=established,related log=no log-prefix="" 3 ;;; default configur...
by Arpanet
Mon Jun 29, 2015 8:55 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Re: Static Routes accross different LANs

/ip address print
 0   192.168.1.1/24     192.168.1.0     ether2-master-local                                   
 1   192.168.6.15/24    192.168.6.0     ether1-gateway  


Thanks, but it does not work. Can't understand why

I'm trying to access from 192.168.6.0/24 lan, maybe problem is DHCP?
by Arpanet
Mon Jun 29, 2015 8:35 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Re: Static Routes accross different LANs

/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" \
out-interface=ether1-gateway
by Arpanet
Mon Jun 29, 2015 8:10 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Re: Static Routes accross different LANs

I mean access via winbox through port 8291.

Nat is made only in RB750 that translates 192.168.6.0 to 192.168.1.0

all other devices are bridged and transparent.

Should I say rb750 to do src-nat only if addresses are not in 192.168.6.0/24?
by Arpanet
Mon Jun 29, 2015 7:31 pm
Forum: General
Topic: Static Routes accross different LANs
Replies: 11
Views: 1377

Static Routes accross different LANs

Network scenario: Internet-> VDSL Modem LAN 192.168.6.1 Dhcp server on -> RB750GL WAN 192.168.6.15 static- LAN 192.168.1.1 Dhcp server on. I set static router on VDSL Modem: Destination: 192.168.1.0 Netmask: 255.255.255.0 Gateway: 192.168.6.15 But I cannot access static or dhcp clients (e.g. 192.168...
by Arpanet
Sun May 03, 2015 7:03 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Re: Simple queue upload not working in bridge mode

I need to mark traffic from/to each interface and then limit packet marks with simple queue?
by Arpanet
Sun May 03, 2015 5:38 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Re: Simple queue upload not working in bridge mode

I use simple queues, while you're using pcq with queues tree

I cannot limit upload traffic yet.

How can I make 2 different queues for download and upload traffic?
by Arpanet
Mon Apr 27, 2015 8:42 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Re: Simple queue upload not working in bridge mode

It's a CPE in router mode
by Arpanet
Sun Apr 26, 2015 5:54 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Re: Simple queue upload not working in bridge mode

In your 1st post, you are marking bridge1. Do the same thing, but on the interface you wish to limit for upload.
adding a new queue only for upload marking interface=wlan1-gateway ?
by Arpanet
Wed Apr 22, 2015 8:09 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Re: Simple queue upload not working in bridge mode

how can I mark it?
thanks
by Arpanet
Wed Apr 22, 2015 2:19 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Re: Simple queue upload not working in bridge mode

maybe you don't know what "Limit-at" parameter stands for: CIR (Committed Information Rate) – (limit-at in RouterOS) worst case scenario, flow will get this amount of traffic rate regardless of other traffic flows. At any given time, the bandwidth should not fall below this committed rate. MIR (Maxi...
by Arpanet
Thu Apr 16, 2015 5:15 pm
Forum: General
Topic: Simple queue upload not working in bridge mode
Replies: 12
Views: 6762

Simple queue upload not working in bridge mode

I can't understand why simple queue works perfectly when target is download but it fails when limiting upload. See my config: 0 name="queue1" target-addresses=0.0.0.0/0 interface=bridge1 parent=none packet-marks="" direction=both priority=8 queue=default-small/default-small limit-at=256k/0 max-limit...
by Arpanet
Tue Apr 14, 2015 11:17 pm
Forum: General
Topic: Block https domain with bridge proxy
Replies: 9
Views: 2814

Re: Block https domain with bridge proxy

Perhaps with L7 you could look at the CN on the HTTPS certificate?
How?
by Arpanet
Tue Apr 14, 2015 8:15 pm
Forum: General
Topic: Block https domain with bridge proxy
Replies: 9
Views: 2814

Re: Block https domain with bridge proxy

so, there's no way to do this?
by Arpanet
Tue Apr 14, 2015 8:08 pm
Forum: General
Topic: Block https domain with bridge proxy
Replies: 9
Views: 2814

Re: Block https domain with bridge proxy

no one?
by Arpanet
Mon Apr 13, 2015 9:13 pm
Forum: General
Topic: Block https domain with bridge proxy
Replies: 9
Views: 2814

Block https domain with bridge proxy

I need to block https://www.website.com I put mikrotik bridge after internet gateway and tried with web proxy: http://i60.tinypic.com/2ikbqpy.jpg > ip firewall nat print 0 ;;; default configuration chain=srcnat action=masquerade to-addresses=0.0.0.0 out-interface=wlan1-gateway 1 chain=dstnat action=...
by Arpanet
Wed Feb 25, 2015 8:14 pm
Forum: Wireless Networking
Topic: Poor CCQ with NV2
Replies: 3
Views: 2074

Poor CCQ with NV2

With NV2 protocol enabled, even though TX/RX signals are not so bad I always see bad CCQ values.
Why?
TX/RX -74/-70
Image

TX/RX -58/-45
Image
by Arpanet
Thu Feb 12, 2015 7:54 pm
Forum: Wireless Networking
Topic: Wireless protocols
Replies: 2
Views: 796

Wireless protocols

I got a RB921UAGS running in nv2-nstreme-802.11 mode with NV2 security on and I need to connect to it standard 802.11 devices using authentication
is it possible?
by Arpanet
Sat Dec 20, 2014 2:59 pm
Forum: Virtualization
Topic: Metarouter Openwrt package issue
Replies: 2
Views: 3230

Metarouter Openwrt package issue

After successfully installing openwrt image (the one from mikrotik wiki) into metarouter, I noticed every command called from openwrt console is invalid. I would like to install bmon package into openwrt or uhttpd but I always get "cannot install xx package". Openwrt image is properly configured to ...
by Arpanet
Tue Nov 18, 2014 6:14 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

On the router, which is translating the CPE private addresses to public addresses. Yes, log to a remote server with a large disk or a matrix. Enable logging on the edge router (the one that faces public interface) could be a problem if CPE private addresses are assigned by DHCP server of Access Poi...
by Arpanet
Tue Nov 04, 2014 11:15 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

Remote or local server possibly with raid1 I guess
Any idea about files size?
by Arpanet
Tue Nov 04, 2014 9:37 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

Which router? the one closest to the customer's router?
router should log into a dedicated server?
by Arpanet
Tue Nov 04, 2014 7:28 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

maybe I did not make myself clear.

I mean Enable Remote Logging on each CPE will be heay on user bandwith?
I'd like to know if there's any disadvantage with remote logging
by Arpanet
Tue Nov 04, 2014 7:15 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

someone says enabling RouterOS logging into each CPE will be heavy on user connection speed.
Is it true?
by Arpanet
Sun Nov 02, 2014 7:28 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

Have you tried calea package?
no. what are its advantages than syslog?
by Arpanet
Sun Nov 02, 2014 6:15 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Re: Log TCP connection

someone says enabling RouterOS logging into each CPE will be heavy on user connection speed.
Is it true?
by Arpanet
Sun Nov 02, 2014 4:16 pm
Forum: General
Topic: Log TCP connection
Replies: 14
Views: 3579

Log TCP connection

I have to log all tcp connections with date & time.
CPEs have static private ip addresses.
What do you suggest between mirror all traffic "after" main router with smart switch and Pc and
enable single logging into each cpe to remote web server?
Which is the best and efficient way?
by Arpanet
Sat Nov 01, 2014 9:39 pm
Forum: General
Topic: Auto port forwarding?
Replies: 0
Views: 606

Auto port forwarding?

I have a natted' network, like this: 1st net- DSL gateway 192.168.1.1/24 2nd- Router wan 192.168.1.10 - lan 192.168.2.1/24 3rd - Router wan 192.168.2.10 - lan 192.168.3.1/24 I have to forward port 8000 from my pc 192.168.3.50 to DSL gateway. Is there a way to do this automatically without setting ru...
by Arpanet
Sat Nov 01, 2014 8:19 pm
Forum: Wireless Networking
Topic: PC - Router as basestation
Replies: 11
Views: 1982

Re: PC - Router as basestation

You want to connect 250 clients to one sector or to one tower (with many sectors)? I would suggest 8 sectors. 250/8~=30 customers per radio interface. That's possible, with NV2 can be quite efficient. I once managed a tower with 8 sectors + 5 point-to-point links to other towers. The spectrum was a...
by Arpanet
Fri Oct 31, 2014 10:56 pm
Forum: Wireless Networking
Topic: PC - Router as basestation
Replies: 11
Views: 1982

Re: PC - Router as basestation

What do you suggest for 200-250customers for each Ap?
8- 45degrees
6- 60degrees
I actually use 4-90degrees

I was doubtful about adding more APs due to Rf noise and self interferences because 5ghz channels are not all free, many of them are already used
by Arpanet
Fri Oct 31, 2014 10:49 pm
Forum: Wireless Networking
Topic: PC - Router as basestation
Replies: 11
Views: 1982

Re: PC - Router as basestation

I thought pc because I am afraid that base stations could not manage 250 customers for each sectorial antenna (for example)
by Arpanet
Fri Oct 31, 2014 10:05 pm
Forum: Wireless Networking
Topic: PC - Router as basestation
Replies: 11
Views: 1982

Re: PC - Router as basestation

Could you explain?
by Arpanet
Fri Oct 31, 2014 9:20 pm
Forum: Wireless Networking
Topic: PC - Router as basestation
Replies: 11
Views: 1982

Re: PC - Router as basestation

I guess a Pc could manage more and more clients than a base station
Correct?
by Arpanet
Fri Oct 31, 2014 8:24 pm
Forum: Wireless Networking
Topic: PC - Router as basestation
Replies: 11
Views: 1982

PC - Router as basestation

Is it possible to use a Pc/Router with wireless card and use it as basestation?
by Arpanet
Wed Oct 29, 2014 6:21 pm
Forum: General
Topic: Web proxy redirection issue
Replies: 3
Views: 2252

Re: Web proxy redirection issue

no one?
by Arpanet
Sun Oct 26, 2014 10:20 pm
Forum: General
Topic: Web proxy redirection issue
Replies: 3
Views: 2252

Re: Web proxy redirection issue

Wireless is made by router.
Cpe (Sxt lite5) is connected to WAN port of custom brand wireless router
by Arpanet
Sun Oct 26, 2014 7:58 pm
Forum: General
Topic: Web proxy redirection issue
Replies: 3
Views: 2252

Web proxy redirection issue

In this scenario: CPE->customer router I want to redirect users to a specific webpage so, I've set up web proxy in this way: 1- Forward customer traffic chain=dstnat action=redirect to-ports=8080 protocol=tcp dst-port=80,8080,443 log=no log-prefix="" 2- Web proxy enabled: yes src-address: :: port: 8...
by Arpanet
Tue Oct 21, 2014 9:45 pm
Forum: General
Topic: Upgrading to 6.20 - queues problem
Replies: 2
Views: 793

Re: Upgrading to 6.20 - queues problem

No one?!
by Arpanet
Tue Oct 21, 2014 11:32 am
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

...so you don't use sector antennas...
Non ho capito.

I use only sector antenna for AP. (della Cyberbajt)
Are they better than Ubiquiti Sector Antennas?
Hai qualche info riguardo il 6ghz in Italia?
by Arpanet
Tue Oct 21, 2014 11:30 am
Forum: General
Topic: Winbox runtime error v3.0beta3
Replies: 2
Views: 717

Re: Winbox runtime error v3.0beta3

I get same error with stable winbox version.
I tried with another PC but same issue
by Arpanet
Mon Oct 20, 2014 9:58 pm
Forum: General
Topic: Upgrading to 6.20 - queues problem
Replies: 2
Views: 793

Upgrading to 6.20 - queues problem

After upgrading to 6.20 I noticed that many Routerboards lose bandwith settings in "quick set" window.
So when I set up again bandwidth limits, RouterOS duplicate queue rule and create 2 queue rules with same settings in queue tree.
Has anyone ever seen this weird thing?
Is it a bug? Why this happens?
by Arpanet
Mon Oct 20, 2014 8:33 pm
Forum: General
Topic: Winbox runtime error v3.0beta3
Replies: 2
Views: 717

Winbox runtime error v3.0beta3

When trying to access some routerboards, winbox freezes and shows this error:

Image
by Arpanet
Fri Oct 17, 2014 7:55 pm
Forum: Wireless Networking
Topic: Licensed frequency stations
Replies: 7
Views: 1624

Re: Licensed frequency stations

6ghz is a licensed frequency? is it allowed only in USA?
by Arpanet
Tue Oct 14, 2014 6:40 pm
Forum: Wireless Networking
Topic: Licensed frequency stations
Replies: 7
Views: 1624

Re: Licensed frequency stations

Hmm weird...I heard it could be done asking a license to mikrotik
by Arpanet
Sat Oct 11, 2014 12:38 am
Forum: Wireless Networking
Topic: Migrating to Nv2
Replies: 5
Views: 1451

Re: Migrating to Nv2

I will lose default wpa authentication?
by Arpanet
Sat Oct 11, 2014 12:23 am
Forum: Wireless Networking
Topic: Migrating to Nv2
Replies: 5
Views: 1451

Re: Migrating to Nv2

Ok I thought with nv2 enabled interference could be heavier.
Anyway is it enough change wireless protocol to nv2 for client and Ap or I need to set up other parameters like tdma period side, nv2 queue count etc?
by Arpanet
Fri Oct 10, 2014 9:14 pm
Forum: Wireless Networking
Topic: Migrating to Nv2
Replies: 5
Views: 1451

Migrating to Nv2

I'm going to replace all my Access Point with mikrotik hardware, especially to implement Nv2 protocol. CPEs are increasing very quicly and TDMA seems to be essential. Reading wiki I read: "Nv2 network will disturb other networks in the same channel" Now, my 4 AP and 120 stations share the same frequ...
by Arpanet
Fri Oct 10, 2014 8:59 pm
Forum: Wireless Networking
Topic: Licensed frequency stations
Replies: 7
Views: 1624

Re: Licensed frequency stations

You can ask here:

http://www.pojitko.cz 10/11GHZ
or
http://www.wi4net.it 26GHZ may be others frequencies
they need hardware modification?
by Arpanet
Fri Oct 10, 2014 8:58 pm
Forum: Wireless Networking
Topic: Change Ap frequency and CPE auto connection
Replies: 5
Views: 1216

Re: Change Ap frequency and CPE auto connection

I hope it! thanks
by Arpanet
Fri Oct 10, 2014 4:58 pm
Forum: Wireless Networking
Topic: Change Ap frequency and CPE auto connection
Replies: 5
Views: 1216

Re: Change Ap frequency and CPE auto connection

country is properly set, I don't know why it does not appear on detail screen
by Arpanet
Fri Oct 10, 2014 4:32 pm
Forum: Wireless Networking
Topic: Change Ap frequency and CPE auto connection
Replies: 5
Views: 1216

Re: Change Ap frequency and CPE auto connection

someone can help me?
by Arpanet
Fri Oct 10, 2014 4:32 pm
Forum: Wireless Networking
Topic: Licensed frequency stations
Replies: 7
Views: 1624

Re: Licensed frequency stations

nobody?
by Arpanet
Thu Oct 09, 2014 10:59 pm
Forum: Wireless Networking
Topic: Licensed frequency stations
Replies: 7
Views: 1624

Licensed frequency stations

I say sorry for my ignorance.
Which mikrotik hardware support licensed frequency?
by Arpanet
Thu Oct 09, 2014 10:53 pm
Forum: Wireless Networking
Topic: Change Ap frequency and CPE auto connection
Replies: 5
Views: 1216

Change Ap frequency and CPE auto connection

I need to change frequency for my 4 Access points
I have 120 stations that should reconnect automatically to them without going to customer side.
Here wireless interface settings of stations: should I change configuration?
Image
by Arpanet
Tue Sep 23, 2014 10:35 am
Forum: General
Topic: Extensive data loss, meaning
Replies: 3
Views: 1348

Re: Extensive data loss, meaning

Where can I find ANI setting?
Could be CPE's damaged by unstable power?
However I will try out.
With nv2 protocol those problems do not exist anymore?
by Arpanet
Mon Sep 22, 2014 8:37 pm
Forum: General
Topic: Extensive data loss, meaning
Replies: 3
Views: 1348

Extensive data loss, meaning

I would like to definetly know what this "error" is due to. Here a screenshot to explain in detail: http://i61.tinypic.com/2gx1mar.png Reading around the forum, some say it's a configuration issue, others say it's wireless interference problem. What I know for sure, it's not due to routerOS version ...
by Arpanet
Tue Aug 19, 2014 6:03 pm
Forum: General
Topic: Set different user groups to log into RouterOS
Replies: 4
Views: 1075

Re: Set different user groups to log into RouterOS

thanks @jarda
I found the solution.
1) Design new skin
2) Create new user group and assign skin to this group
3) Create new user to that group
Done!
by Arpanet
Tue Aug 19, 2014 4:31 pm
Forum: General
Topic: Set different user groups to log into RouterOS
Replies: 4
Views: 1075

Re: Set different user groups to log into RouterOS

Some users want to enable mac ACL for their own lan, so they have to log into the routeros
by Arpanet
Tue Aug 19, 2014 3:05 pm
Forum: General
Topic: Set different user groups to log into RouterOS
Replies: 4
Views: 1075

Set different user groups to log into RouterOS

I want normal users to access routeros config via winbox but only in specific pages
For example Admin can see every config page while guest1 can only access wireless config page.

Is it possible? How to do that?
Thanks
by Arpanet
Mon Jul 28, 2014 4:31 pm
Forum: General
Topic: Appending ?safe=active to google searches
Replies: 1
Views: 1341

Re: Appending ?safe=active to google searches

first you have to allow google's domains.
/ip proxy access
add action=allow disabled=no dst-host=*.google.* 
then you can redirect
/ip proxy access
add action=deny disabled=no dst-host=*.google.* dst-port="" redirect-to="https://www.google.com/?safe=active"
by Arpanet
Mon Jul 28, 2014 4:24 pm
Forum: General
Topic: HotSpot Q
Replies: 1
Views: 473

Re: HotSpot Q

the only way is enabling hotspot to the wireless interface.
by Arpanet
Mon Jul 28, 2014 4:20 pm
Forum: General
Topic: Silent boot on RB 133
Replies: 1
Views: 495

Re: Silent boot on RB 133

as wiki says RB100, RB500 and Crossroads are not supported.

if you are so experienced to do that, you could remove the speaker but it's not easy neither recommended (warranty void)
by Arpanet
Mon Jul 28, 2014 4:15 pm
Forum: General
Topic: ntp client on RB doesn't work
Replies: 4
Views: 904

Re: ntp client on RB doesn't work

why you want your pc as ntp server?
usually it's better to set up ntp client with global ntp server addresses, e.g:
system ntp client set mode=unicast primary-ntp=193.204.114.232 
secondary-ntp=193.204.114.233 enabled=yes  
by Arpanet
Wed Jul 16, 2014 8:17 pm
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

at the moment I use rocket m5 as AP. You? What do you suggest me? Thanks for your help Ps: I see you just add internet everywhere slogan on your logo! Right? Enjoy the match! Actually most of my ptp bridge are RB411 + R52Hn when I need dual polarization, metal 5shn when I need only one polarization...
by Arpanet
Wed Jul 16, 2014 6:31 pm
Forum: General
Topic: Wlan radio disconnections
Replies: 6
Views: 860

Re: Wlan radio disconnections

yes, but as you know if there's a problem on rear panels will reflect even in front of them.

Anyway I will try to upgrade!
by Arpanet
Wed Jul 16, 2014 5:09 pm
Forum: General
Topic: Wlan radio disconnections
Replies: 6
Views: 860

Re: Wlan radio disconnections

I don't there's big difference between 5.25 and 5.26
maybe I have to shield sector antennas better?
by Arpanet
Tue Jul 15, 2014 8:46 pm
Forum: General
Topic: Wlan radio disconnections
Replies: 6
Views: 860

Re: Wlan radio disconnections

Unfortunately, as I said, my Ap are not routerboards. -In some cases, I notice few CPEs lost connection to its own Ap. While other are always good. For example in the log above, station disconnects from its own AP (DC:9F:DB:50:FA:32 in pic). And what amaze me, it's the only AP in my Ap tower! and no...
by Arpanet
Tue Jul 15, 2014 6:59 pm
Forum: General
Topic: Wlan radio disconnections
Replies: 6
Views: 860

Wlan radio disconnections

at certain times of the day my customer claims disconnections.
looking at the cpe's log I see this:
Image



I also searched the wiki for log arguments but it seems too general.
can you help me?
by Arpanet
Sun Jul 13, 2014 10:18 pm
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

at the moment I use rocket m5 as AP.
You? What do you suggest me?
Thanks for your help
Ps: I see you just add internet everywhere slogan on your logo! Right?

Enjoy the match!
by Arpanet
Sun Jul 13, 2014 9:45 pm
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

If I understand: pppoe server (RB1100AHx2) -->bridge with VAP on Access Point-> CPE ppooe client-> nat router -> local lan?

Unfortunately, ma AP hardware is not mikrotik, but ubiquiti.
What do you use for your AP?
by Arpanet
Sun Jul 13, 2014 9:07 pm
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

thanks rextended. Now it's clear. As I see, I need one access concetrator (pppoe server) for all my customers? My problem is to have different and separate networks and as you can understand, I don't how to implement that, maybe it's a lil' bit hard to achieve. Natted networks are also a problem?I t...
by Arpanet
Sun Jul 13, 2014 2:30 pm
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

in my case, pppoe server should be CPE and pppoe client customers' router? Is that correct?
what benefits I would get?
- See if users browse the web and then?
by Arpanet
Sun Jul 13, 2014 3:27 am
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

It seems I can't do that without using pppoe authentication
by Arpanet
Sun Jul 13, 2014 12:04 am
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

Re: How to see if users have internet access

This tool works even if another network is after local subnet/interface for example a router with different ip range?
E.g. CPE torch ->192.168.88.X ether1 interface/local subnet->router 192.168.0.X lan
by Arpanet
Sat Jul 12, 2014 11:13 pm
Forum: General
Topic: How to see if users have internet access
Replies: 17
Views: 2480

How to see if users have internet access

Is there a way to see if users are browsing the web?
They have no pppoe authentication.
RouterOS has a feature/tool to see this?
Thanks
by Arpanet
Thu Jul 10, 2014 12:53 am
Forum: General
Topic: Limit bandwith with simple queue
Replies: 8
Views: 1803

Re: Limit bandwith with simple queue

thanks so much @rextended
by Arpanet
Wed Jul 09, 2014 9:25 pm
Forum: General
Topic: Limit bandwith with simple queue
Replies: 8
Views: 1803

Re: Limit bandwith with simple queue

I don't know why my simple queue rule has not been applied. Here queue simple config: 0 name="queue1" target-addresses=0.0.0.0/0 interface=bridge1 parent=none packet-marks="" direction=both priority=8 queue=default-small/default-small limit-at=0/0 max-limit=256k/2M burst-limit=0/0 burst-threshold=0/...
by Arpanet
Sun Jul 06, 2014 10:15 pm
Forum: General
Topic: Limit bandwith with simple queue
Replies: 8
Views: 1803

Re: Limit bandwith with simple queue

Simply paste this on CPE with RouterOS 6.x: /queue simple add max-limit=256k/2M name=queue1 target=ether1 First number is Upload from client to Internet, the second is Download from Internet to client. And interface parameter? interface=bridge1 Anyway I think pppoe auth is better but also more expe...
by Arpanet
Fri Jul 04, 2014 10:23 pm
Forum: General
Topic: Limit bandwith with simple queue
Replies: 8
Views: 1803

Re: Limit bandwith with simple queue

I don't understand. You're not answering my question.
However no, I can't.
by Arpanet
Fri Jul 04, 2014 9:44 pm
Forum: General
Topic: Limit bandwith with simple queue
Replies: 8
Views: 1803

Limit bandwith with simple queue

I want to limit bandwith of my customers networks
CPE's are in bridge mode with static ip address for wan interface. Lan interface is made by a router with another lan address.
How to limit ether1 lan interface with 256k target upload and 2M target download?
by Arpanet
Wed Jun 18, 2014 2:57 pm
Forum: General
Topic: Fallback access Client in bridge mode
Replies: 1
Views: 644

Fallback access Client in bridge mode

I have SXT Lite5 set as client in bridge mode with static wan ip address (e.g 192.168.1.XX)

When CPE losts its connection to wan network I can't access to it anymore.
Neither with mac address nor with my pc and static address configured.
Why? How to solve this?
Thanks
by Arpanet
Sun Jun 08, 2014 12:38 pm
Forum: General
Topic: Welcome page on free wifi
Replies: 6
Views: 2149

Re: Welcome page on free wifi

So, hotspot is the only way?
Is there no another chance or alternative?
by Arpanet
Sun Jun 08, 2014 1:49 am
Forum: General
Topic: Welcome page on free wifi
Replies: 6
Views: 2149

Re: Welcome page on free wifi

I'd like to use a welcome page and no more stuff.

Ciao vorrei semplicemente reindirizzare gli utenti sul sito a scopo pubblicitario.
by Arpanet
Sat Jun 07, 2014 9:17 pm
Forum: General
Topic: Welcome page on free wifi
Replies: 6
Views: 2149

Welcome page on free wifi

Is there any way to redirect users to a welcome page and then let them to access internet with no login or registration?
Should I use hotspot package or web proxy?
thanks
by Arpanet
Wed May 14, 2014 3:11 pm
Forum: General
Topic: How to control multiple remote networks with PPTP-VPN
Replies: 1
Views: 541

How to control multiple remote networks with PPTP-VPN

I want to control remote LAN's (in picture 192.168.0.0/24 and 192.168.1.0/24) load balanced by RB750GL, from my house.
Is it possible with a single PPTP tunnel? Is there a way to achieve this?


Image
by Arpanet
Wed May 14, 2014 2:07 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

it requires cisco ios?
by Arpanet
Wed May 14, 2014 1:18 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

What?!? For each modem?!? No! The very opposite! See the below topology: TrafficCaptureTopology.png And if you have multiple RouterOS routers (each connected to a separate modem), you can connect all smart switches to a single smart switch, from which instead of using port mirroring, you simply mak...
by Arpanet
Tue May 13, 2014 12:54 pm
Forum: General
Topic: Block hd videos via proxy or firewall
Replies: 8
Views: 1788

Re: Block hd videos via proxy or firewall

this is a youtube hd video url:
https://www.youtube.com/watch?v=6v2L2UGZJAM

:?
by Arpanet
Tue May 13, 2014 1:55 am
Forum: General
Topic: Block hd videos via proxy or firewall
Replies: 8
Views: 1788

Re: Block hd videos via proxy or firewall

I do not see any "hd" tag in youtube video url
It seems really impossible
by Arpanet
Mon May 12, 2014 6:53 pm
Forum: General
Topic: Block hd videos via proxy or firewall
Replies: 8
Views: 1788

Re: Block hd videos via proxy or firewall

I don't want users to watch any hd video!
by Arpanet
Mon May 12, 2014 6:42 pm
Forum: General
Topic: Block hd videos via proxy or firewall
Replies: 8
Views: 1788

Block hd videos via proxy or firewall

I was wondering if there's a way to block high definition videos such as youtube hd or other websites that offer hd streaming videos.
any proxy/firewall rule?
by Arpanet
Sun May 11, 2014 6:21 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

multiple cpe's logging is allowed?
lf I set user cpe for logging this will be heavy on user connection speed?
by Arpanet
Sun May 11, 2014 6:11 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

why on the access point?
I configured a customer cpe to remote log on udp 514 to a pc into my lan and it seems to work as picture I posted in previous post.
by Arpanet
Sun May 11, 2014 6:01 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

by now I access cpe's via routing.
the problem is cpe addresses are assigned by Access Point dhcp server.
so manual config I think is necessary..
by Arpanet
Sun May 11, 2014 5:59 pm
Forum: General
Topic: Redirect user without hotspot and authentication
Replies: 9
Views: 1158

Re: Redirect user without hotspot and authentication

ok this solution in case of pppoe server
by Arpanet
Sun May 11, 2014 5:29 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

if users do not log in via ppoe, should I manually configure each client's cpe for remote logging?
by Arpanet
Sun May 11, 2014 5:27 pm
Forum: General
Topic: Redirect user without hotspot and authentication
Replies: 9
Views: 1158

Re: Redirect user without hotspot and authentication

it seems hard to achieve :)
by Arpanet
Sun May 11, 2014 1:47 pm
Forum: General
Topic: Redirect user without hotspot and authentication
Replies: 9
Views: 1158

Re: Redirect user without hotspot and authentication

yes, you hit it! it's for defaulting customers :)
so I could place proxy rules in each customer cpe ?
by Arpanet
Sun May 11, 2014 1:41 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

ok, sorry for my incompetence. so what method do you think it's better for logging customer traffic respecting italian privacy law? I thought to log to a remote server (e.g syslog watcher) listening on udp 514 and saving all firewall topics. so data captured are like this: http://i59.tinypic.com/1z6...
by Arpanet
Sun May 11, 2014 4:32 am
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

You're talking about users redirection?
I always thought to use squid as caching server...so it could solve traffic logging & saving I guess
by Arpanet
Sun May 11, 2014 12:54 am
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

do you think this kind of logging is better or worse than syslog remote logging?
by Arpanet
Sun May 11, 2014 12:51 am
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

ok with topic=firewall now it works.
which is the different with web-proxy topic? Which is better to use?
by Arpanet
Sun May 11, 2014 12:48 am
Forum: General
Topic: Redirect user without hotspot and authentication
Replies: 9
Views: 1158

Re: Redirect user without hotspot and authentication

a proxy with redirect-to tag could be a solution?
by Arpanet
Sun May 11, 2014 12:14 am
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

yes, @boenrobot my network topology is as your second topology picture, I guess in first topology load-balancing is a must :D anyway: isp1=modem1->ap1->cpe's->client network isp2=modem2->ap2->cpe's->client network so only one difference with your pic, there's no mikrotik router between isp modem and...
by Arpanet
Sat May 10, 2014 11:37 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

In second topology why did you place a routeros after each ISP modem?
So for dual wan setups I need 3 smart switch right?
by Arpanet
Sat May 10, 2014 11:23 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

I'm sorry. I meant I don't want to change actual network topology.
By now each Ap is connected directly to separate ISP modem
by Arpanet
Sat May 10, 2014 10:50 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

You're right . I changed to "remote" now but still no data.
Maybe it's my network since is natt'd.
Should I open port 514 for each NAT node?
by Arpanet
Sat May 10, 2014 9:22 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Re: Logging web traffic to remote webserver

now I set topic to firewall, but no data yet :(
by Arpanet
Sat May 10, 2014 8:56 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

I don't want load balancing between two isp's
by Arpanet
Sat May 10, 2014 8:34 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

Omg! Does it mean I need one webserver (storing data) for each modem/smart switch?
what about cpe remote logging (topic=webproxy) to remote server? (I'm considering this option)
by Arpanet
Sat May 10, 2014 8:26 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10845

Logging web traffic to remote webserver

I want to send web traffic log to a remote server listening on UDP 514 from a CPE and then save it with a properly software. CPE config: ip firewall filter rules 5 ;;; default configuration chain=forward action=accept connection-state=established 6 ;;; default configuration chain=forward action=acce...
by Arpanet
Sat May 10, 2014 7:36 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

does it work with multiple gateways/modem?

should I connect each modem to a separate switch lan port for mirroring?
by Arpanet
Sat May 10, 2014 7:32 pm
Forum: General
Topic: Redirect user without hotspot and authentication
Replies: 9
Views: 1158

Redirect user without hotspot and authentication

What I would like to have is redirect user to a web page (allowed by proxy) without using hotspot interface or radius authentication.
is it possible?
by Arpanet
Sun May 04, 2014 7:28 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

mirroring is separate from ip configuration?
by Arpanet
Sat May 03, 2014 9:23 pm
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1967

Re: Port forwarding across Nat'd network

So it should be run into the modem?
Correct?
by Arpanet
Sat May 03, 2014 9:13 pm
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1967

Re: Port forwarding across Nat'd network

Dynamic dns client, I'm talking about public ip from my isp is dymanic
http://en.wikipedia.org/wiki/Dynamic_DNS
by Arpanet
Sat May 03, 2014 4:33 pm
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1967

Re: Port forwarding across Nat'd network

now it's very clear caci99..thanks
but how about dynamic dns client? Shouldn't I run it?
Which way is better between forwarding and ip routing?
I'd like to keep my current configuration, I feel safe with NAT...
by Arpanet
Sat May 03, 2014 12:30 am
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1967

Re: Port forwarding across Nat'd network

sorry for my ignorance, I am newbie...
so you suggest to forward all traffic comin on modem 192.168.6.1 to 192.168.0.100 through port 808?
Rules you posted are to be set into modem?
Where do I run dynamic dns client?
Is ip routing involved with port forwarding?
by Arpanet
Fri May 02, 2014 12:16 pm
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1967

Re: Port forwarding across Nat'd network

The problem is not the port, but how to set routing and forwarding.
I could use another port instead of 80.

@egate I did not understand what you told...so confusing
by Arpanet
Thu May 01, 2014 7:22 pm
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1967

Port forwarding across Nat'd network

Below my network map. I'm trying to access ip camera outside lan.
As you can see everything is behind NAT.
Should I bridge one layer instead of NAT layer?
I don't know how to set port forwarding.
All hardware (except for the camera) is based on routerOS
Image
by Arpanet
Wed Apr 30, 2014 4:08 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

mirroring will work also into a NAT network?
by Arpanet
Tue Apr 29, 2014 8:00 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

yeah, now it's all clear.
Can I save data being captured?
by Arpanet
Tue Apr 29, 2014 6:36 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

is it better an ethernet hub?
how can I search for a mirror switch? What's specific name of mirroring in product specs?
by Arpanet
Tue Apr 29, 2014 1:05 pm
Forum: General
Topic: View clients' http requests and traffic
Replies: 45
Views: 8935

Re: View clients' http requests and traffic

so if I use a smart switch and place it into "switch" place on my network I could monitor and view all my clients CPEs traffic?
I need just this?Nothing else? Something like wireshark or similar?
what mikrotik switch can I buy?
by Arpanet
Wed Apr 23, 2014 8:48 pm
Forum: General
Topic: Route selection between 2 or more static routes
Replies: 1
Views: 360

Route selection between 2 or more static routes

I have installed 2 static routes (non-BGP), because I have 2 uplink with 2 gateways (e.g. 10.0.1/24 & 10.0.2/24) By default we all know only one static route could be active and could forward packets to next hop destination. So how can I use both routes? this is what I read on wiki page: For non-BGP...
by Arpanet
Mon Apr 21, 2014 6:50 pm
Forum: General
Topic: Routing w/ multiple gateways
Replies: 3
Views: 748

Re: Routing w/ multiple gateways

you're right, I forgot to explain that.
#Edited first post
by Arpanet
Mon Apr 21, 2014 5:35 pm
Forum: General
Topic: Routing w/ multiple gateways
Replies: 3
Views: 748

Routing w/ multiple gateways

This is my network scheme. What I'm trying to do is access CPE (sxt lite5) via winbox from my pc. Nano stands for ubiquiti nanobridge CPEs are in the same network, connected to each Ap. (Sorry, for the picture, it's not so clear) each Access Point is connected to one dsl separately. (e.g Ap3=>isp1, ...
by Arpanet
Fri Apr 04, 2014 1:47 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

yes I use 192.168.0.0/24 network to access routerboard.
And one more thing: if I remove this rule
dst-address=192.168.20.0/24 gateway=192.168.7.10 pref-src=192.168.7.2
from my internet gateways I cannot route neither one.
by Arpanet
Fri Apr 04, 2014 1:26 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

**Edit again**

I can route networks only if I connect directly to routerboard.
I actually connect to rb via wireless bridge link, into LAN3=192.168.0.1 network.
In this scenario I can route only one network at time.
I can't understand why!
by Arpanet
Wed Apr 02, 2014 3:54 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

now it works!
thanks to rextended
Perfect!

E scusa ancora per il fraintendimento.

Ciao!
Figurati scusa anche a me e grazie ;)
by Arpanet
Wed Apr 02, 2014 2:24 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

these rules are set into my internet gateways. So I have to remove them and set into my routerboard? add distance=1 dst-address=192.168.10.0/24 gateway=192.168.6.10 pref-src=192.168.6.2 add distance=1 dst-address=192.168.20.0/24 gateway=192.168.7.10 pref-src=192.168.7.2 then I have 2 internet source...
by Arpanet
Wed Apr 02, 2014 12:13 am
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

Ok, I try to explain network scenario. I'm trying to reach few stations into 2 different networks (192.168.10.x and 192.168.20.x) The 2 network gateways has following routing table: 1st gw-destination network=192.168.10.0 subnet=255.255.255.0 gateway=192.168.6.10 2nd gw-destination network=192.168.2...
by Arpanet
Tue Apr 01, 2014 11:51 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

A little misunderstanding with my italian co-worker. Everything is ok! We are talking about company names, nothing else.
Anyway I think problem is connection marking as rextended said.

But I don't know how to mark connections!
by Arpanet
Tue Apr 01, 2014 10:48 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

Ma qual è il tuo problema?
Fammi capire
by Arpanet
Tue Apr 01, 2014 8:44 pm
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Re: Routing selection with two gateways

Per favore, non ti offendere. Solo una cosa: ma ARPANET (tra l'altro nome già registrato da un altra azienda italiana con brevetto internazionale e che pure lavora nel campo delle comunicazioni... se se ne accorge...) come nome della rete aziendale, non è un po' troppo pretenzioso? Per trovare il s...
by Arpanet
Tue Apr 01, 2014 10:16 am
Forum: General
Topic: Routing selection with two gateways
Replies: 25
Views: 2940

Routing selection with two gateways

I don't know how to reach both my static routes. I can only reach first default static route. Second route is unreacheable, only if I disconnect first gateway I can route addresses. I tried to set distance, scope and target scope but nothing solved. Where am I going wrong? This is my config: ip addr...
by Arpanet
Sat Mar 15, 2014 6:25 pm
Forum: General
Topic: Netwatch issue
Replies: 5
Views: 1130

Re: Netwatch issue

The two modems have to be in the same ip network, correct?
by Arpanet
Wed Mar 12, 2014 9:07 pm
Forum: General
Topic: Netwatch issue
Replies: 5
Views: 1130

Re: Netwatch issue

two modems? I'm not using failover
my rb750gl has to "watch" only one modem
by Arpanet
Wed Mar 12, 2014 7:50 pm
Forum: General
Topic: Netwatch issue
Replies: 5
Views: 1130

Netwatch issue

I set up netwatch on my RB750GL successfully.
But I notice it works only if dsl-modem turns off.
So whenever modem loses dsl-alignment or internet connection I cannot know anything.
Why does this happen?
Is there a way to "watch" even those parameters?
thanks
by Arpanet
Tue Mar 11, 2014 10:26 pm
Forum: Scripting
Topic: Edit values with a script
Replies: 4
Views: 4042

Re: Edit values with a script

You can set (edit) a firewall rule like this:

/ip firewall filter set action=accept number=6

sent from my mobile phone with tapatalk
Thank you c0d3rs
You understand what I mean, it works!
by Arpanet
Tue Mar 11, 2014 10:10 pm
Forum: Scripting
Topic: Edit values with a script
Replies: 4
Views: 4042

Edit values with a script

It's easy to change a variable via terminal, since it opens a text-editor. What I want to do is write down script, so I can schedule it. Script: e.g. admin@MikroTik] /ip firewall filter> edit number=6 value-name=action I need to change action value-name from (default) action=drop to action=accept Is...
by Arpanet
Sun Mar 09, 2014 9:28 pm
Forum: General
Topic: proxy for https connecton
Replies: 7
Views: 2182

Re: proxy for https connecton

is there another way to solve this?
by Arpanet
Sun Mar 09, 2014 9:06 pm
Forum: General
Topic: Hotspot autologin cookie time setting
Replies: 9
Views: 2401

Re: Hotspot autologin cookie time setting

should I choose -masquerade-network=no- in /ip hotspot setup?
by Arpanet
Sun Mar 02, 2014 9:43 pm
Forum: General
Topic: Hotspot autologin cookie time setting
Replies: 9
Views: 2401

Re: Hotspot autologin cookie time setting

How to solve this?
by Arpanet
Sun Mar 02, 2014 9:09 pm
Forum: General
Topic: Hotspot autologin cookie time setting
Replies: 9
Views: 2401

Re: Hotspot autologin cookie time setting

yes, they are connecting through an AP (AP get internet access via wireless ptp bridge)
by Arpanet
Sun Mar 02, 2014 8:51 pm
Forum: General
Topic: Hotspot autologin cookie time setting
Replies: 9
Views: 2401

Re: Hotspot autologin cookie time setting

But when multiple users try to connect to hs network, cookie does not let users to be redirected again, because the hs-user is already logged in! What does this mean? Does the new device display a login page or shows already logged in? I have not tried this with multiple logins with a common userna...
by Arpanet
Sun Mar 02, 2014 8:30 pm
Forum: General
Topic: One router, multiple dsl connections
Replies: 7
Views: 1264

Re: One router, multiple dsl connections

should I get internet access with that configuration?!
'cause I can't get it by now.
by Arpanet
Sun Mar 02, 2014 8:30 pm
Forum: General
Topic: Hotspot autologin cookie time setting
Replies: 9
Views: 2401

Re: Hotspot autologin cookie time setting

yeah, it's set 99 shared users.
but it does not work yet.
by Arpanet
Sun Mar 02, 2014 6:43 pm
Forum: General
Topic: Hotspot autologin cookie time setting
Replies: 9
Views: 2401

Hotspot autologin cookie time setting

I just want users to be redirected to my portal without any kind of login. So I set only one user auto-logged in my hs server. But when multiple users try to connect to hs network, cookie does not let users to be redirected again, because the hs-user is already logged in! I also uselessly tried to s...
by Arpanet
Fri Feb 28, 2014 10:13 pm
Forum: General
Topic: Proxy and Firewall Rules
Replies: 19
Views: 3996

Re: Proxy and Firewall Rules

At the beginning of this thread, someone asked how to they could have someone bypass the proxy that was in place. In this situation, they knew the MAC address, but the IP address was always going to be changing. If they had had the IP address, they would only have needed to put the rule into the pr...
by Arpanet
Thu Feb 27, 2014 10:22 pm
Forum: General
Topic: Proxy and Firewall Rules
Replies: 19
Views: 3996

Re: Proxy and Firewall Rules

sorry for my ingnorance, I'm new to routeros;
I guess I need to create this rule in -ip proxy direct ?
and what's the function of this rule?
by Arpanet
Thu Feb 27, 2014 10:04 pm
Forum: General
Topic: Proxy and Firewall Rules
Replies: 19
Views: 3996

Re: Proxy and Firewall Rules

No Problem :D Glad you got it working.
hey guys when trying to set rule in -ip proxy access I got this:
 /ip proxy access> set numbers=0 src-address=[/ip arp get value-name=address number=[find mac-address
=40:B3:95:62:EA:E7]]
no such item
why??
by Arpanet
Tue Feb 25, 2014 8:40 pm
Forum: General
Topic: One router, multiple dsl connections
Replies: 7
Views: 1264

Re: One router, multiple dsl connections

believe me, load balancing could work only if you use bandwith-based or policy routing method.
by Arpanet
Tue Feb 25, 2014 8:32 pm
Forum: General
Topic: One router, multiple dsl connections
Replies: 7
Views: 1264

Re: One router, multiple dsl connections

just this?! :shock: :shock:
by Arpanet
Tue Feb 25, 2014 8:14 pm
Forum: General
Topic: One router, multiple dsl connections
Replies: 7
Views: 1264

Re: One router, multiple dsl connections

I did not explain it right.
E.g.
2 dsl modems both static ip address assigned (192.168.1.1 and 192.168.2.1)
1 routerboard static ip address assigned 192.168.4.1
but with no load-balancing. only to use one gateway and create one network.
by Arpanet
Mon Feb 24, 2014 8:39 pm
Forum: General
Topic: One router, multiple dsl connections
Replies: 7
Views: 1264

One router, multiple dsl connections

is there a way to join multiple dsl connections into one gateway without any load balancing?
sorry for my ignorance! I'm new to routeros!
by Arpanet
Sat Feb 22, 2014 7:20 pm
Forum: Wireless Networking
Topic: Hotspot routeros gatway, ubnt radios, wireless bridge
Replies: 0
Views: 600

Hotspot routeros gatway, ubnt radios, wireless bridge

I'm trying to create a 2,4Ghz Hotspot only with a captive portal. But I don't know which method to use.
This is the actual network set-up:
Image



what would you choose in this case?
by Arpanet
Thu Feb 20, 2014 9:45 pm
Forum: General
Topic: PCC balancing issues
Replies: 6
Views: 1287

Re: PCC balancing issues

I much prefer some form of Policy Based Routing as well. Sending some customer or some traffic classes out one gateway is how I usually do it as well. That works every time and is very reliable :D bandwith based - easy scalable, control of connections, failover / own problems policy routing - easy ...
by Arpanet
Wed Feb 19, 2014 9:27 pm
Forum: General
Topic: PCC balancing issues
Replies: 6
Views: 1287

Re: PCC balancing issues

Yeah, I used src address mangle rules.
I hope to find another way to balance it.
Maybe I should use bandwith based load-balancing?
What do you think about?
by Arpanet
Mon Feb 17, 2014 9:31 pm
Forum: General
Topic: PCC balancing issues
Replies: 6
Views: 1287

PCC balancing issues

After set PCC with 2 DSL lines, I realized two cons:
1-Speed tests do not match real bandwith;
2-Latency and jitter have incresead too much (got short disconnections)

Now I'm wondering why:
Image



what do you think about it?
by Arpanet
Mon Feb 17, 2014 9:24 pm
Forum: General
Topic: Speed Test Client CPE
Replies: 14
Views: 3248

Re: Speed Test Client CPE

thank you.
I got some other questions:
-it says javaw not found
-does it works between mikrotik & ubiquiti devices?
by Arpanet
Mon Feb 17, 2014 9:20 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

I turn off DFS. All chains activated. but same results. Customers got different distances from the AP. I got customers far only 300mt and others far 2.0km. Take a look now, with DFS turned off. Ping test from CPE to google server. http://imagizer.imageshack.us/v2/xq90/32/4atg.png Ping test from AP t...
by Arpanet
Mon Feb 17, 2014 7:52 pm
Forum: General
Topic: Speed Test Client CPE
Replies: 14
Views: 3248

Re: Speed Test Client CPE

OMG it's not in english :D
by Arpanet
Mon Feb 17, 2014 7:47 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

One more point.
Are on SXT In "wireless" "HT" all the chains ticked so "no" all the chains must by activated
I have to activate all the chains, right?
where to put "distance" into routerboards?
by Arpanet
Sun Feb 16, 2014 6:06 pm
Forum: General
Topic: Speed Test Client CPE
Replies: 14
Views: 3248

Re: Speed Test Client CPE

yeah, everyone knows what iperf is.
I don't know how to set Routerboard as client.
by Arpanet
Sun Feb 16, 2014 6:05 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

I think DFS is something gov uses to scew with us.
Anyway what do you think about this?
http://www.balticnetworks.com/ubtiktm-5 ... ennas.html

I would try advantages of nstreme protocol.
by Arpanet
Sat Feb 15, 2014 11:08 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

Hmm you open my mind. I have to check it out. I will let you know all these details
I'm wondering why RouterOS does not advise when connection is being lost due to dfs mode!
by Arpanet
Sat Feb 15, 2014 10:08 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

In straight line about 240meters
by Arpanet
Sat Feb 15, 2014 9:53 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

you're welcome.
distance in this format? 0.1km?
by Arpanet
Sat Feb 15, 2014 9:10 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

Image


should I put estimated distance of wireless link? (in client's configuration)
by Arpanet
Sat Feb 15, 2014 7:53 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

Image



cpe are mikrotik sxt lite 5 (5580Mhz DFS country italy manual-txpower 20/40Mhz HT above)
ap's are ubiquiti rocket m5 with sectorial airmax antenna 20dbi-90°
by Arpanet
Sat Feb 15, 2014 6:55 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

some kind of interference?
by Arpanet
Sat Feb 15, 2014 6:18 pm
Forum: General
Topic: Speed Test Client CPE
Replies: 14
Views: 3248

Re: Speed Test Client CPE

is there any wiki for iperf?
by Arpanet
Sat Feb 15, 2014 6:17 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

thanks you're helping me a lot.
So I'm trying to understand where it fails.
1st hop = 192.168.40.1 (ap gateway)
2nd hop = 192.168.0.1 (main router)

this is traceroute:
Image

what do you think?
by Arpanet
Sat Feb 15, 2014 12:34 am
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Re: Ping speed test weird results

No there's no related post. I'm worring about that 5% packet loss. Config is simple. Sectorial ap's 5,5ghz and client cpe (sxt lite5) as stations (DHCP clients). Screenshot is taken from a customer cpe far 600ft in LoS, pinging google a hundred times. My customer is claiming about long pings and ver...
by Arpanet
Fri Feb 14, 2014 11:17 pm
Forum: Wireless Networking
Topic: Ping speed test weird results
Replies: 32
Views: 5462

Ping speed test weird results

below, ping speed test results between a customer CPE and my RB750gl as main gateway.
maybe there's something going wrong, but I can't realize what!

Image
by Arpanet
Fri Feb 14, 2014 10:16 pm
Forum: General
Topic: Speed Test Client CPE
Replies: 14
Views: 3248

Re: Speed Test Client CPE

you mean I will use 100% of cpu usage during bandwith test?
by Arpanet
Fri Feb 14, 2014 9:06 pm
Forum: General
Topic: Changelog RouterOS 6.7
Replies: 27
Views: 17502

Re: Changelog RouterOS 6.7

Please notice:
command
tls=yes/no
for
/tool email
has changed to
start-tls=yes/no
by Arpanet
Fri Feb 14, 2014 8:59 pm
Forum: Wireless Networking
Topic: Btest mikrotik vs real bandwidth
Replies: 21
Views: 8752

Re: Btest mikrotik vs real bandwidth

Are you using any simple queue?
why? silmple queue may cause issues to bandwith test?
by Arpanet
Fri Feb 14, 2014 8:48 pm
Forum: General
Topic: Speed Test Client CPE
Replies: 14
Views: 3248

Speed Test Client CPE

I would know how to see real clients both download & upload speed.
Only via bandwith server tool?
by Arpanet
Fri Feb 07, 2014 7:57 pm
Forum: Forwarding Protocols
Topic: BGP advantages in 2 autonomous systems
Replies: 5
Views: 1525

Re: BGP advantages in 2 autonomous systems

Ok. You're right. I didn't make myself clear. I would know what are advantages bgp could bring if implemented into a general network. In my scenario, I got 2 dsl connections (two border gateways) that provides internet access to some clients. So I would like to understand if BGP could help. e.g. in...
by Arpanet
Thu Feb 06, 2014 7:42 pm
Forum: Forwarding Protocols
Topic: BGP advantages in 2 autonomous systems
Replies: 5
Views: 1525

Re: BGP advantages in 2 autonomous systems

Maybe I did not explain it clearly? BGP is simply a way of exchanging routes, Autonomous System or AS determine if BGP is External BGP (between two different ASN) or Internal BGP (Between Same ASN) Your question is a confusing, it is not clear what is it that you are wanting to achieve ? My Questio...
by Arpanet
Tue Feb 04, 2014 10:31 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

yes, I can ping ip camera from main router, and yes, I can access the camera images from a computer connected to the main router.
can't understand why.
port issue?
by Arpanet
Tue Feb 04, 2014 10:11 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

now ping works.
but I can't access camera interface yet. omg!
by Arpanet
Tue Feb 04, 2014 9:41 pm
Forum: Forwarding Protocols
Topic: BGP advantages in 2 autonomous systems
Replies: 5
Views: 1525

Re: BGP advantages in 2 autonomous systems

Maybe I did not explain it clearly?
by Arpanet
Tue Feb 04, 2014 9:37 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

Ouch I can't ping 192.168.88.1 from main router!
by Arpanet
Tue Feb 04, 2014 7:08 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

hmm, it doesn't work yet.
I got dhcp issue too?
by Arpanet
Mon Feb 03, 2014 10:16 pm
Forum: Forwarding Protocols
Topic: BGP advantages in 2 autonomous systems
Replies: 5
Views: 1525

BGP advantages in 2 autonomous systems

I was wondering what advantages could I have if I use BGP in this scenario:
Image
by Arpanet
Mon Feb 03, 2014 9:45 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

you said it correct, cpe has 192.168.10.187 ip address.
by Arpanet
Mon Feb 03, 2014 9:28 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

192.168.0.x is core network (cable lan). each ap has 192.168.0.x ip for LAN.
E.g
in this case cpe is connected to AP1 192.168.0.15 (lan), 192.168.10.1 (wlan)
by Arpanet
Mon Feb 03, 2014 9:01 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

The main router shows it has a 192.168.88.1/24 interface. 17 ADC 192.168.88.0/24 192.168.88.1 ether2-master-l... 0 Maybe you should delete that ip address from that interface. Did you notice the rest of the routes on the main router are over a 192.168.0.x network? 13 A S 192.168.10.0/24 192.168.0.1...
by Arpanet
Mon Feb 03, 2014 8:13 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

this is cpe (sxt lite5) routing config: [admin@MikroTik] > ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 S 0.0.0.0/0 192.168.20.1 1 1 S ...
by Arpanet
Sun Feb 02, 2014 1:40 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

Cpe obtain ip address automatically via DHCP by AP2.
So its ip is something like 192.168.40.150.

How to route?
by Arpanet
Sun Feb 02, 2014 12:52 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Re: Hairpin NAT in this case

browser client is outside the network, into another DSL connection.
this my NAT config:
Image

followed this: http://networkingforintegrators.com/201 ... xternally/
by Arpanet
Sat Feb 01, 2014 8:41 pm
Forum: General
Topic: Hairpin NAT in this case
Replies: 21
Views: 4164

Hairpin NAT in this case

this my network map:
Image


What I want to do is see ip camera with dyn dns outside Lan network.
But now when I go to mydomain.dyndns... I get modem webpage instead of ip camera interface. 8090 is the port I used.
Maybe I'm missing some step.
by Arpanet
Fri Jan 24, 2014 9:56 pm
Forum: General
Topic: Set custom DL-UL bandwith rates
Replies: 3
Views: 908

Re: Set custom DL-UL bandwith rates

yeah, but how?
via terminal or winbox?
by Arpanet
Thu Jan 23, 2014 9:25 pm
Forum: General
Topic: Set custom DL-UL bandwith rates
Replies: 3
Views: 908

Set custom DL-UL bandwith rates

I know it's easy to set different bandwith rates via winbox such as 512/1/2/4Mbps.
but I want to set custom bandwith rates both Download and Upload like DL 3Mbps UL 500Kbps
Can I do something like that? How?
by Arpanet
Mon Dec 16, 2013 9:45 pm
Forum: General
Topic: Routerboard RB951 as AP router mode
Replies: 5
Views: 1515

Re: Routerboard RB951 as AP router mode

please anyone?
by Arpanet
Sat Nov 30, 2013 11:12 pm
Forum: General
Topic: Routerboard RB951 as AP router mode
Replies: 5
Views: 1515

Re: Routerboard RB951 as AP router mode

I also add ip route add gateway 192.168.0.1.
but still no internet connection! where am I going worng?


Image
by Arpanet
Sat Nov 30, 2013 9:07 pm
Forum: General
Topic: Routerboard RB951 as AP router mode
Replies: 5
Views: 1515

Re: Routerboard RB951 as AP router mode

if you mean when I set static acquisition I specify everything I think:
ip address=192.168.0.100 subnet=255.255.255.0 gateway=192.168.0.1
so I think it's no a gw issue
by Arpanet
Sat Nov 30, 2013 8:11 pm
Forum: General
Topic: Routerboard RB951 as AP router mode
Replies: 5
Views: 1515

Routerboard RB951 as AP router mode

I'm trying to set routerboard 951 (AP bridge) to router mode with this configuration: -Mode: Router -WAN Address acquisition: Static 192.168.0.X/24 -WLAN ip address: 192.168.88.1/24 dhcp server enabled 192.168.88.2-254 There's no way to get internet access! On the other hand if I set wan address acq...
by Arpanet
Mon Nov 18, 2013 12:40 am
Forum: General
Topic: Best load balancing per-connection method?
Replies: 5
Views: 1144

Re: Best load balancing per-connection method?

The result I want to achieve is balancing both download and upload traffic speed. I mean if there are 20 users that use download more than upload ADSL connection will be choose. At the same time if 10 users are uploading a file shdsl from second ISP will be preferred path. Inviato da mio iPhone util...
by Arpanet
Sat Nov 16, 2013 7:54 pm
Forum: General
Topic: Static ip route scenario
Replies: 1
Views: 584

Static ip route scenario

I'm trying to access my Router C from a laptop into Router A network: -Router A (the one closest to internet) gw=192.168.1.1 pc= 192.168.1.86 (pc from I try to connect) -Router B (Ap) wlan=192.168.10.1 eth=192.168.1.15 -Router C (Client/CPE) wlan=192.168.10.10 eth=192.168.88.1 This is how I set stat...
by Arpanet
Sat Nov 16, 2013 6:13 pm
Forum: General
Topic: OpenVPN for dhcp clients
Replies: 2
Views: 548

Re: OpenVPN for dhcp clients

I need some help for IP config of static routes:
how to set?
Image
by Arpanet
Wed Nov 13, 2013 10:17 pm
Forum: General
Topic: OpenVPN for dhcp clients
Replies: 2
Views: 548

OpenVPN for dhcp clients

Assuming default routes are already traced.
Is it possible this kind of configuration?

ImageUploaded with ImageShack.com
by Arpanet
Tue Nov 12, 2013 10:44 pm
Forum: General
Topic: Best load balancing per-connection method?
Replies: 5
Views: 1144

Re: Best load balancing per-connection method?

this is my achieve:

Image

Uploaded with ImageShack.us


what I wanna do is balancing traffic over two networks to avoid overcrowding with failover set up.
By now I have 4 LANs with 35-40 users per LAN.
by Arpanet
Mon Nov 11, 2013 8:55 pm
Forum: General
Topic: Best load balancing per-connection method?
Replies: 5
Views: 1144

Re: Best load balancing per-connection method?

please, anyone?
by Arpanet
Sun Nov 10, 2013 10:17 pm
Forum: General
Topic: Could not add new interface - Openvpn client
Replies: 1
Views: 762

Could not add new interface - Openvpn client

I can't understand, after setting my windows openvpn server, I successfully imported ca.crt and client.crt via ftp to my cpe,
when I try to add new interface I get this error:
Could not add new interface - No certificate found (6)

where do I go wrong?
by Arpanet
Sun Nov 10, 2013 7:45 pm
Forum: General
Topic: Best load balancing per-connection method?
Replies: 5
Views: 1144

Best load balancing per-connection method?

I was wondering which is the best load balancing per-connection with failover method:
PCC,ECMP,NTH?
Which hardware to choose? I was thinking about RT 750G.
by Arpanet
Thu Nov 07, 2013 7:32 pm
Forum: General
Topic: Lock to AP MAC function
Replies: 4
Views: 1582

Re: Lock to AP MAC function

anyone?
by Arpanet
Sun Nov 03, 2013 7:42 pm
Forum: General
Topic: Lock to AP MAC function
Replies: 4
Views: 1582

Re: Lock to AP MAC function

Is it necessary turning off Default authentication?
by Arpanet
Thu Oct 31, 2013 8:05 pm
Forum: Wireless Networking
Topic: Pinging radios, cost 2 WLAN
Replies: 0
Views: 448

Pinging radios, cost 2 WLAN

I would know if I can ping radios in front of them with a cost 2 wireless link.
or I have to be behind them?
I tried to set static routes but I cant' access CPE's web interface yet.

thanks in advance
by Arpanet
Mon Oct 28, 2013 9:58 pm
Forum: General
Topic: How to reach CPE into different LAN's
Replies: 2
Views: 707

How to reach CPE into different LAN's

Can you tell me more?
How to build these static routes?

Sent from my iPhone using Tapatalk
by Arpanet
Mon Oct 28, 2013 9:23 pm
Forum: General
Topic: How to reach CPE into different LAN's
Replies: 2
Views: 707

How to reach CPE into different LAN's

this is my network map:

Image



So my question is:
how can I reach CPEs from device connected to main gateway (192.168.1.1)?
I need to add static routes?
by Arpanet
Tue Oct 15, 2013 9:07 pm
Forum: Wireless Networking
Topic: CPE changes default AP every day
Replies: 1
Views: 954

CPE changes default AP every day

I noticed cpe's (sxt lite5) change default ap which are useually connected to every day. There are 4 AP's, each of them provides internet connection. They all got a good LoS (-60/65dbm) with every CPE. I'd know the reason of this behavior, is due to changes about the signal strenght? During this cha...
by Arpanet
Sun Oct 13, 2013 7:10 pm
Forum: General
Topic: Lock to AP MAC function
Replies: 4
Views: 1582

Lock to AP MAC function

How can I add connect list?


Sent from my iPhone using Tapatalk - now Free
by Arpanet
Sun Oct 13, 2013 5:29 pm
Forum: General
Topic: Lock to AP MAC function
Replies: 4
Views: 1582

Lock to AP MAC function

I was wondering if it's possible to lock CPE/Clients to a specific AP's MAC address?

I mean, for example, 4 AP's and I want my client to connect only for one, avoiding connections with the other ones.
by Arpanet
Thu Oct 10, 2013 11:29 pm
Forum: General
Topic: Questions about RouterOS v5.26 and winbox
Replies: 2
Views: 2609

Re: Questions about RouterOS v5.26 and winbox

thanks @navshad
but the most important question is:
is there a way to avoid router's connection to a specific MAC address??
even via terminal!