Community discussions

Search found 60 matches

  • 1
  • 2
by vadimbn
Tue May 29, 2018 10:08 pm
Forum: RouterBOARD hardware
Topic: cant reset rb1100 x2 ah after firmware update
Replies: 5
Views: 766

Re: cant reset rb1100 x2 ah after firmware update

there is NO reset button in the front just fyi there is 2 reset buttons inside of case.
Ah yes, You are right. RB1100AHx4 has reset button in hole of front pannel, RB1100AHx2 has the button in backward of board. But You can use same algorithm using this button.
by vadimbn
Tue May 29, 2018 9:18 pm
Forum: RouterBOARD hardware
Topic: cant reset rb1100 x2 ah after firmware update
Replies: 5
Views: 766

Re: cant reset rb1100 x2 ah after firmware update

Ok what happens if serial dont pick it up? is it junk? Have you loaded the wrong bootloader ("firmware" in the Mikrotik's notation) or RouterOS? If the firmware was wrong, serial console will be unavailable. For this case all RouterBoards have a second or backup firmware. You can load router (and t...
by vadimbn
Sat May 19, 2018 8:31 pm
Forum: RouterBOARD hardware
Topic: Woobm with Linux [SOLVED]
Replies: 4
Views: 856

Re: Woobm with Linux [SOLVED]

For example on Ubuntu 14.04: Device /dev/ttyUSB0 should be exist after plug in Woobm-USB into USB-port: ls /dev/ttyU* /dev/ttyUSB0 Now we can create the configuration file for initialize a console on the device /etc/init/ttyUSB0.conf: touch /etc/init/ttyUSB0.conf This file should contain this code: ...
by vadimbn
Fri May 18, 2018 7:10 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 vs RB450Gx4
Replies: 49
Views: 9756

Re: RB850Gx2 vs RB450Gx4

No heatsink on the IPQ4019 chip?!
Probably only on demonstration photo. I think that the CPU will have heatsink in serial models of boards.
by vadimbn
Sat May 05, 2018 11:52 am
Forum: RouterBOARD hardware
Topic: Mikrotik CCR1036-12G-4S Always Reboot
Replies: 3
Views: 719

Re: Mikrotik CCR1036-12G-4S Always Reboot

Look at capacitors in the PSU of this router.
Please see this theme - viewtopic.php?f=3&t=119728
by vadimbn
Tue Apr 17, 2018 10:14 pm
Forum: RouterBOARD hardware
Topic: HAP AC2 PERFORMANCE NUMBERS
Replies: 14
Views: 6970

Re: HAP AC2 PERFORMANCE NUMBERS

No HW supported openvpn yet.

:(
When it was promised? And who it promised? Or you mean hardware support for IPsec?
by vadimbn
Fri Apr 06, 2018 11:05 am
Forum: RouterBOARD hardware
Topic: RB850GX2 temperature
Replies: 1
Views: 467

Re: RB850GX2 temperature

Greetings to all, I wanted to know what is the ambient temperature and the normal CPU temperature on this board, and above all at what time should I worry about the high temperature? According to this document and this datasheet , CPU QoriQ P1023 can work in a wide temperature range - from -40 to +...
by vadimbn
Thu Mar 29, 2018 12:00 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?
Replies: 12
Views: 1154

Re: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?

How long before somebody tries out water cooling a Mikrotik? :D Hm... But also why not try to use heat pipes for removal of part of heat to metallic case of the router? managed by temperature change? These air fans can works 24/7. But if You want to manage the RPM of the fan then You can use someth...
by vadimbn
Wed Mar 28, 2018 8:45 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?
Replies: 12
Views: 1154

Re: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?

In this case I apologize for my harsh statement. Usually i use fans similar to used in other mikrotik's routers. You can use fans with maglev technology of Sunon for example. Please see models MF30150V1-1000U-A99 or MF30150V2-1000U-A99 from this catalogue . They have high RPMs and it is high effecti...
by vadimbn
Wed Mar 28, 2018 11:42 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?
Replies: 12
Views: 1154

Re: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?

It seems pretty silly to have the pinout on the board but have no way of using it. It seems pretty silly to use fan with this router. There is no need any fans or hairdryer. I have this router and he works in datacenter about half year - themperature of processor is about 35 - 39 degrees all this t...
by vadimbn
Sun Mar 18, 2018 2:29 am
Forum: RouterBOARD hardware
Topic: hAP ac² - more RAM than in HW specification [SOLVED]
Replies: 55
Views: 13487

Re: hAP ac² - more RAM than in HW specification [SOLVED]

Have you heard about gift horse? :)
Yes, and also about her teeth. But. But.
Ah, of course, i will live with this. I already bought hAP ac². I'm wait it from EuroDK. May be i will more lucky and my hAP ac² will have a SD-card slot or something else??? :)
by vadimbn
Sat Mar 17, 2018 11:44 pm
Forum: RouterBOARD hardware
Topic: hAP ac² - more RAM than in HW specification [SOLVED]
Replies: 55
Views: 13487

Re: hAP ac² - more RAM than in HW specification [SOLVED]

You got a 233Mb chip, live with it :lol:
Hmm... This will make me unhappy... 233 is not so beautiful as 256... :)
by vadimbn
Sat Mar 17, 2018 6:26 pm
Forum: RouterBOARD hardware
Topic: hAP ac² - more RAM than in HW specification [SOLVED]
Replies: 55
Views: 13487

Re: hAP ac² - more RAM than in HW specification [SOLVED]

But there is only 233.4MiBs. In my RB750Gr3 all 256.0 MiBs is written. Where are the last 23 MiBs?
by vadimbn
Sat Mar 17, 2018 1:35 pm
Forum: RouterBOARD hardware
Topic: hAP ac² - more RAM than in HW specification [SOLVED]
Replies: 55
Views: 13487

Re: hAP ac² - more RAM than in HW specification [SOLVED]

Add a little lottery to marketing ... Who will be lucky, will get more RAM. Hurry to buy!!!
by vadimbn
Sat Mar 17, 2018 8:07 am
Forum: RouterBOARD hardware
Topic: hAP ac² - more RAM than in HW specification [SOLVED]
Replies: 55
Views: 13487

Re: hAP ac² - more RAM than in HW specification [SOLVED]

Just change specifications from "Size of RAM: 128 MB" to "Size of RAM: at least 128 MB". :)
by vadimbn
Tue Mar 13, 2018 10:47 am
Forum: RouterBOARD hardware
Topic: When will MikroTik hAP ac2 be released?
Replies: 20
Views: 2068

Re: When will MikroTik hAP ac2 be released?

Does hAP ac2 support 220V regardless of power plug type? Or, do I have to buy hAP ac2 with euro plug to use it at home? Anyway, you can use almost any power supply with this router. All mikrotik routers have a DC voltage regulator on the motherboard and can work with a wide range of supply voltage ...
by vadimbn
Sun Mar 11, 2018 11:18 pm
Forum: RouterBOARD hardware
Topic: HAP ac2 vs rb750gr3 cpu power
Replies: 3
Views: 2598

Re: HAP ac2 vs rb750gr3 cpu power

how much more powerful is hex cpu over hap ac2? Considering hap ac2 as routers from now since it comes with wifi. wanna know how much i'd lose out on cpu According to Ethernet and IPsec test results i can say that hAP ac² is more powerfull than hEX . We have 4 full cores @716 MHz in hAP ac² vs 2 co...
by vadimbn
Sun Mar 11, 2018 9:39 am
Forum: RouterBOARD hardware
Topic: CCR1036 Power Supply
Replies: 61
Views: 9684

Re: CCR1036 Power Supply

Thank you very much. So we assume that if I buy tomorrow one CCR1036 I can get the "revised" version with green caps, and the connector for the 2nd PSU. The main problem of these PSUs is the high load for CCR1036 and high temperature in result. You can see in pictures in this theme that green capac...
by vadimbn
Fri Feb 02, 2018 6:46 am
Forum: RouterBOARD hardware
Topic: RB1100AH-X2 clock settings
Replies: 1
Views: 317

Re: RB1100AH-X2 clock settings

Does an 1100AH-X2 run @ 1333MHz clock? By default = 1066MHz. Using 533MHz DDR btw.
Yes, he fine run @1333 MHz. More than 4 years he worked in our datacenter at this frequiency without any problems, and he was changed to RB1100AHx4 (who also fine runs now @1600MHz).
by vadimbn
Thu Feb 01, 2018 10:13 am
Forum: RouterBOARD hardware
Topic: ARM based new goodies on the horizon
Replies: 76
Views: 13744

Re: ARM based new goodies on the horizon

What I would love to see is a hAP AC with IPsec Hardware encryption and with a dedicated WPS button. As i see, hAP ac² have table "IPsec test results". It's mean that IPsec hardware encryption already works in this router. Also it have Reset/WPS button and Wave2 wireless chip. So we have (with comp...
by vadimbn
Fri Dec 15, 2017 8:05 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1505

Re: is RB1100AHx2 production going to stop?

my speed is 30mbps/30mbps up/down. i said about rb1100ahx2 because it is the first L6 model. buying just a L6 licence is 250$ . so why not to buy rb1100ah2 for 300$. You can also use RB850Gx2, it have L5 license level (500 hot-spot users), user manager module, and it will be enough for Your Interne...
by vadimbn
Fri Dec 15, 2017 5:46 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1505

Re: is RB1100AHx2 production going to stop?

but i want user manager for paid hotspot.
Are You sure that You need rb1100ahx2? What is the speed of Your Internet connection?
by vadimbn
Thu Dec 07, 2017 7:54 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Switches/Block diagram
Replies: 15
Views: 2868

Re: RB1100AHx4 Switches/Block diagram

Any chance for fix?
What's new in 6.41rc61 (2017-Dec-06 08:15):
.....................................................................................
*) winbox - added switch menu on RB1100AHx4;
.....................................................................................
by vadimbn
Thu Nov 30, 2017 3:35 pm
Forum: RouterBOARD hardware
Topic: CCR-1016-12G bricked
Replies: 3
Views: 520

Re: CCR-1016-12G bricked

You can try to connect him via COM-port, using any terminal program. I think that boot loader of Your router is live, and You will see a boot menu. Also You can use Netinstall for formatting flash and reinstalling RouterOS.
by vadimbn
Thu Nov 23, 2017 7:31 pm
Forum: RouterBOARD hardware
Topic: Attach Power Backup CCR 1036
Replies: 2
Views: 466

Re: Attach Power Backup CCR 1036

My questin is
Can use connector 2 For Backup power ????
Yes, you can see this in RB1100AHx4, both of its PSU works in parallel, but it can work and on one...
But in CCR 1036 not enough space for second power supply.
by vadimbn
Tue Nov 14, 2017 10:27 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Switches/Block diagram
Replies: 15
Views: 2868

Re: RB1100AHx4 Switches/Block diagram

@mikrotik So is there no switch in normal 1100ahx4 ? Guess not as I see the switch groups blinking groupwise at startup. You can see a photo. https://img.routerboard.com/mimg/1346_l.jpg There are three switch chips with a transformers, there are no disk interfaces only. This CPU have too few RGMII ...
by vadimbn
Tue Oct 03, 2017 7:13 pm
Forum: RouterBOARD hardware
Topic: hEX NAT performance
Replies: 5
Views: 3097

Re: hEX NAT performance

MT7621A include the PPE (Packet Processing Engine) but RouterOS can not work with it. So yes, hEX will limit of speed of network without fast tracking. And speed will be more limited if you will use any tunnels or many firewall rules. Ubiquiti ER-X will be better for network address translation on g...
by vadimbn
Wed Sep 20, 2017 5:12 pm
Forum: RouterBOARD hardware
Topic: 1100AHx2 or CCR1009 or 1100AHx4 for router with VPNs
Replies: 6
Views: 1755

Re: 1100AHx2 or CCR1009 or 1100AHx4 for router with VPNs

No... In your case, CCR will only gave more heat into atmosphere. RB1100AHx4 is a great solution by significance equal RB750Gr3 among cheaper routers. In my humble opinion it is more reliable because have two PSU, and more adapted for working with dude - you can use any M.2 SATA and 2.5'' SSD or HDD...
by vadimbn
Wed Sep 20, 2017 3:07 pm
Forum: RouterBOARD hardware
Topic: 1100AHx2 or CCR1009 or 1100AHx4 for router with VPNs
Replies: 6
Views: 1755

Re: 1100AHx2 or CCR1009 or 1100AHx4 for router with VPNs

Please tell us what is the speed of your connection to the provider? If it is about 100 Mb/s, then you can use more cheaper RB750Gr3, it have IPsec hardware acceleration. RB1100AHx4 or x2 will good if this speed is above 300 Mb/s, otherwise they will be too surplused. Or you mean offices with networ...
by vadimbn
Wed Sep 20, 2017 2:01 pm
Forum: RouterBOARD hardware
Topic: 1100AHx2 or CCR1009 or 1100AHx4 for router with VPNs
Replies: 6
Views: 1755

Re: 1100AHx2 or CCR1009 or 1100AHx4 for router with VPNs

What kind of VPN You want use, and for what? I have a both, RB1100AHx2 and RB1100AHx4 - second solution is better at all. It is silent, faster, have HDD connectors, two PSU, transformers at all Ethermet ports. If you will consider an equal price of these routers then RB1100AHx4 will beyond competiti...
by vadimbn
Fri Sep 01, 2017 7:20 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 25588

Re: v6.40.3 [current]

RB11000AHx4 permanently work with the SPI with this release. Is it normally?

Image
by vadimbn
Thu Aug 31, 2017 11:26 pm
Forum: RouterBOARD hardware
Topic: CCR1036 Power Supply
Replies: 61
Views: 9684

Re: CCR1036 Power Supply

It is available as a separate part for purchase, but you have to check with our sales department. I think the part is only available to distributors, they sometimes sell it to people where warranty has ended. Not touching of warranty and suppliers... I can not use 1036 router in my work now - his P...
by vadimbn
Tue Aug 22, 2017 9:20 pm
Forum: RouterBOARD hardware
Topic: Corrupted routerboard firmware prevents booting
Replies: 15
Views: 2966

Re: Corrupted routerboard firmware prevents booting

Have You tried boot Your device with backup booter before actions with the chip?
by vadimbn
Mon Aug 21, 2017 7:07 pm
Forum: RouterBOARD hardware
Topic: Memory test errors for RB1100AHx4 [SOLVED]
Replies: 5
Views: 843

Re: Memory test errors for RB1100AHx4 [SOLVED]

The problem has been resolved in RouterBoot version 3.42.
by vadimbn
Sun Aug 20, 2017 2:23 pm
Forum: RouterBOARD hardware
Topic: RB493G freezes with SiL3512 SATA-controller plugged in
Replies: 3
Views: 418

Re: RB493G freezes with SiL3512 SATA-controller plugged in

IThe serial console doesn't show any output.
Then oops... Probably RouterBoot cannot configure this card for normal work. Mini PCI cards support PnP, but PnP should be supported by hardware and software (BIOS, EFI or BootLoader).
by vadimbn
Sun Aug 20, 2017 12:30 pm
Forum: RouterBOARD hardware
Topic: RB493G freezes with SiL3512 SATA-controller plugged in
Replies: 3
Views: 418

Re: RB493G freezes with SiL3512 SATA-controller plugged in

Does anybody have an idea what's going wrong? Thanx for any hint. There are no any hints. This device will not work with RB493G - there have no drivers for this controller. Why You think that it should work? See this hardware compatibility list . RouterOS is not usual linux. You can try to install ...
by vadimbn
Wed Aug 16, 2017 11:24 pm
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM fans
Replies: 17
Views: 3872

Re: CRS326-24G-2S+RM fans

it is better than CRS125
I believe yes, the Prestera platform have two core ARM v7 @ 800 MHz, so it can be as powerfull as bestseller RB750Gr3. But probably without hardware IPsec. Can You check this?
by vadimbn
Wed Aug 16, 2017 9:45 pm
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM fans
Replies: 17
Views: 3872

Re: CRS326-24G-2S+RM fans

i put the box under load (500Mbps full duplex traffic) via external traffic generator, but as far as i remember it was still around 57-58 C.
Traffic via CPU or only via switch matrix? You use this device as a router? Under RouterOS?
by vadimbn
Wed Aug 16, 2017 10:15 am
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM fans
Replies: 17
Views: 3872

Re: CRS326-24G-2S+RM fans

Is it possible to put the fans yourself?
57 C is normal temperature. You do not need any active cooling system. Operating temperature for marvell chips is usually within -30 - +85 C. If you worry for high heating, you can just to glue small passive heatsink to processor.
by vadimbn
Mon Aug 14, 2017 4:25 pm
Forum: RouterBOARD hardware
Topic: Memory test errors for RB1100AHx4 [SOLVED]
Replies: 5
Views: 843

Re: Memory test errors for RB1100AHx4 [SOLVED]

Your device is OK, and you should not worry.
It is a bug in the memory test program. We will fix it in RouterBOOT. Try the next release and upgrade RouterBOOT with /system routerboard upgrade command
Oh, Thank You Normis. This is good news for me! Will wait for update.
by vadimbn
Sat Aug 12, 2017 1:26 pm
Forum: RouterBOARD hardware
Topic: Memory test errors for RB1100AHx4 [SOLVED]
Replies: 5
Views: 843

Re: Memory test errors for RB1100AHx4 [SOLVED]

Generate a supout and email support. If device is under warranty, it will be covered.
It is reasonable advice. I created support ticket and will wait an answer...
by vadimbn
Sat Aug 12, 2017 11:25 am
Forum: RouterBOARD hardware
Topic: Memory test errors for RB1100AHx4 [SOLVED]
Replies: 5
Views: 843

Memory test errors for RB1100AHx4 [SOLVED]

When i run memory testing from boot loader (press "t" button in setup menu) i got next errors - your choice: t - do memory testing This may take some time, ESC aborts testing Fill memory with addresses: Filling memory... Error in address=0x016FFEEC, W=0x016FFEEC R=0x0100A334 X=0x006F5DD8 Error in ad...
by vadimbn
Thu Aug 10, 2017 4:37 pm
Forum: RouterBOARD hardware
Topic: Best ports for WAN / ISP on RB1100AHx4 [SOLVED]
Replies: 4
Views: 1213

Re: Best ports for WAN / ISP on RB1100AHx4 [SOLVED]

Captura de pantalla 2017-08-09 a la(s) 10.23.49.png Typically, ether11 and ether12, as they're out of the switch chips (better for LAN) and have direct CPU connection. RB1100AHx4 has other diagram. In this model all ethernet ports are plugged into a switches via transformers. So there is no differe...
by vadimbn
Thu Jun 22, 2017 9:56 am
Forum: Announcements
Topic: v6.38.7 [bugfix] is released!
Replies: 26
Views: 17633

Re: v6.38.7 [bugfix] is released!

Thanks for this release, but can you add in current bugfix also this -
!) tile - fixed IPSec hardware acceleration out-of-order packet problem, significantly improved performance;
?
by vadimbn
Fri Sep 11, 2015 11:53 am
Forum: Announcements
Topic: v6.32.1 released
Replies: 76
Views: 18663

Re: v6.32.1 released

Wow. Normis, so I need to purchase a Windows license, install Windows,install Netinstall, use it just once (I hope so) and wipe that Windows out from my HDD? You can have a problem with netinstall in the Wine environment. In this case You can use one of official microsoft Virtual Machines for linux...
by vadimbn
Fri May 29, 2015 11:44 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1012218

Re: CLOUD CORE ROUTER

Dear Normis! The CCR-1036 support SO-DIMM ECC RAM memory ? (...like: Kingston SO-DIMM 8 GB ECC DDR3-1333 x2) What type of SO-DIMM memory is the best for the CCR-1036 ? (ECC vs. NON ECC, 1333MHz vs. 1600MHz) Please help choosing between these... Thx. Attila The Tilera CPU supports it from the DDR3 c...
by vadimbn
Mon Oct 06, 2014 3:15 pm
Forum: General
Topic: v6.20 released!
Replies: 146
Views: 58192

Re: v6.20 released!

Dear developers, please see the attached screenshots. Can You explain, where are my disks? Before update to 6.20 i have two disks - internal and sd-card. After - nothing.
by vadimbn
Thu Sep 18, 2014 6:19 pm
Forum: General
Topic: v6.19 released
Replies: 256
Views: 92716

Re: v6.19 released

I observe a memory leak on this version of RouterOS. Ticket#2014091866000668 has been created.
by vadimbn
Thu Aug 21, 2014 7:31 am
Forum: General
Topic: Cloning mac address
Replies: 2
Views: 2520

Re: Cloning mac address

So I want to clone the MAC address of the AP onto the MK WAN interface.
It's easy. For example
/interface ethernet set ether1 mac-address=XX:XX:XX:XX:XX:XX
by vadimbn
Tue Jun 10, 2014 11:16 am
Forum: General
Topic: v6.14 released
Replies: 115
Views: 24092

Re: v6.14 released

Normis, please, pay attention to this bug. Also i created Ticket#2014061066000277 for this... Please, fix this issue, it very strange that the bug was not fixed since version 6.8 was released...
  • 1
  • 2