After upgrade my bonding stop working on x86. Issue was strange only icmp was ok and other protocols has no communication. Even winbox couldnt discovery on ipv4 and ipv6. Downgrade to 6.4 fix problem. Logs was clear on both sides pc with ros and switch L2.

+1 for IGMP snooping! :)

+1 for print server support

+1 for print server support

I have the same problem. My queue just stop receiving data from mangle and for example yesterday works fine but today all queues show 0 "zero". Log does not report any error. When I edit something in options in queue tree for specific mangle then it's start to work. Would it be fixed in 6.2?

can you all please test the "Latvia" download mirror? What speeds to you get in your country (name it). Is it higher than ususal?

2011-12-08 13:32:12 (9,08 MB/s) - `mikrotik-5.9.iso' from Poland.

I use VPLS for transporting VLANs over wireless. Works absolutely fantastic. Is that an option for you?

can You give example config?

Is it possible to access rb250s from tagged vlan? ...and how? For example I have trunk to rb250s with some vlans 100,200,300,400,500 and vlan 100 is for manage devices in network. I try this: 1) in System I set ip 10.100.1.12 2) in VLANs I create vlan 100 and assign to port 5 3) in VLAN I have: 3.1)...

for example i want to block all users which mac address contains "00:0C:29"

can mt do it?

i try to connect few rb with my gigabit interface on laptop but it doesnt work i try to connect few rb with my gigabit interface on FO converter but it doesnt work i try to connect few rb with my gigabit swithch but it doesnt work i connect my gigabit interface on laptop with FO converter and it wor...

AR5213 works fine on ROS3.3

thx it works in WDS

Will this be the requirement when moving to v3.0 or will 2.9 be upgradeable via FTP and a restart?

i have 2.9.50 and i upgraded to 2.0.RC13 and it works fine (verified on over 10 rb)

mac ping works to all stations and problem is that there isn't communication over IP between station 192.168.0.4 and 192.168.0.2, 192.168.0.5

could be that station 192.168.0.3 has bug in bridge mode with wlan cards and it can't pass IP information?

my config RB333: MT - 3.0RC9 3 x AR5413 all ports eth and wlan are in bridge wireless connection is in bridge <===> pseudobridge speed DL 4mb and UP 1mb PPS ~ 400 powered by PoE what I did - 1 of 3 eth is ON - 1 of 3 wlan is ON - contrack is OFF - no firewall rules - eth and wlan in bridge what else...

What is your configuration on RB333, please make the support output file when the ethernet port stops responding. What throughput (speed and packets per second) you see through this board? RB333: MT - 3.0RC9 3 x AR5413 (but only one is active) all ports eth and wlan are in bridge connection trackin...

set up wireless,info,debug in /system logging and you will see all the information that is available.

and 100% you will see if wireless disconnects or not

RB333 sometimes rebooting without reason and somtimes port eth stop respond or RB333 freezing for 10-15s

also you can try to do system reset-configuration and start clean installation, maybe there are some problem while upgrading from previous version, if that is an option. yes now it's works with this configuration: RB333 (all in bridge) & WLAN (pseudobridge) <==> WLAN (bridge) & RB333 (all i...

Try put IP address on Bridge interface instead./Henrik I have IP on bridge on both sides if I set routing on one side transmission works thats my configuration: 1) RB333 (all-ports-in-bridge) 192.168.0.1/24 <=====> RB333 (all-ports-in-bridge) 192.168.0.2/24 - in this case NO transmission 1) RB333 (...

I have the same problem

2xRB333 with RC9 all ports (eth and wlan) are bridged and I can't ping through them

ping stops on wlan port on both side even mac-ping doesn't work

if I use routing ping work fine

any solution for this problem?

problem solved
i press and hold button near leds before i connect power supply and it's work now
it looks like board freeze after upgrade

after upgrade RB153 from 2.39 to 2.41 board stop response and leds on ethernet don't flash

ps: that's was new RB153 without any special configuration

i have the same problem FC5 wine-0.9.24 - winbox freeze ( on wine-0.9.23 works fine)