Community discussions

Search found 58 matches

by boldsuck
Sat Aug 24, 2019 11:55 pm
Forum: General
Topic: BLOCK SPAMMERS DONT WORK - FIREWALL
Replies: 5
Views: 697

Re: BLOCK SPAMMERS DONT WORK - FIREWALL

Hmm..
spam & virus blocking I do with a combination of Postfix regex, amavisd-new and SpamAssassin
and not with firewall rules.
by boldsuck
Sat Aug 24, 2019 11:43 pm
Forum: General
Topic: where can I create a script in RouterOS?
Replies: 5
Views: 5447

Re: where can I create a script in RouterOS?

After adding your script, you want to do it automatically. ;-)

please refer:
/system scheduler
(= GNU/Linux cronjobs)
by boldsuck
Wed Jun 26, 2019 9:56 pm
Forum: General
Topic: How to deny the all access from "wan" to "lan" in forward chain ?
Replies: 4
Views: 637

Re: How to deny the all access from "wan" to "lan" in forward chain ?

I can telnet the ip address "lan" whitch being masqueraded of in src-address-list=NAT from "wan"?
And after reset to defaults:
One of the most important pages for new ROS users:
https://wiki.mikrotik.com/wiki/Manual:S ... our_Router

Telnet from WAN :shock: Take SSH with pub-key-auth.
by boldsuck
Thu Jun 20, 2019 10:42 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

I thought that more people would be willing to help, but sadly not. me too. I have now unsubscribed at Patreon. ;-( Thanks for everything Dave. You and this thread inspired me to refine my own raw bruteforce & portscan rules. I'm trying to do something similar. With fail2ban (0.10 has ipv6 support)...
by boldsuck
Sat May 18, 2019 5:29 pm
Forum: General
Topic: Suggestion: At new releases
Replies: 9
Views: 1112

Re: Suggestion: At new releases

Hey, it wasn't anything against you. Just an observation that maybe MikroTik may not want to mention it, because it could lead too many people to ask why they can't use it with their device. Ok, now understand what you meant. ;-) On my RB2011 (mips, 128MB flash) the 2nd partition is very nice to te...
by boldsuck
Fri May 10, 2019 9:41 pm
Forum: General
Topic: Suggestion: At new releases
Replies: 9
Views: 1112

Re: Suggestion: At new releases

You can mention it as much as you want, but as long as all new lower end devices have "massive" 16MB flash, it's useless.
This is the first time I mentioned that.
And it will be the last time.
by boldsuck
Thu May 09, 2019 7:21 pm
Forum: General
Topic: firewall src add and dst add
Replies: 38
Views: 3993

Re: firewall src add and dst add

Wow, Didn't think that was already implemented, do you know what was the first version of RouterOS to implement this ? also does this handle sites with multiple IPs? someone should update the wiki page with this simple solution instead of the script and scheduler solution That's over 2 years in ROS...
by boldsuck
Thu May 09, 2019 6:56 pm
Forum: General
Topic: Suggestion: At new releases
Replies: 9
Views: 1112

Suggestion: At new releases

RouterOS version 6.44.3 has been released in public "stable" channel! Before an upgrade: 1) Remember to make backup/export files before an upgrade and save them on another storage device; and/or use the partition function. Fallback to a running backup partition is much more stress free than backup ...
by boldsuck
Sun May 05, 2019 4:59 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

I'm still working on the IPv6 version of the list. My home ISP has finally managed to provide a stable v6 connection, so I'll be able to start testing. IPv6 Yeah! That's very good news. Have meanwhile a few servers on the run. (Debian, Static IP & IPv6) If you want to test something on it ... can I...
by boldsuck
Fri Feb 22, 2019 6:50 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154934

Re: RouterOS v7.0 beta1 - when?

If MikroTik is unwilling to be transparent at the very least they could do is help RouterOS become Open Source so those who care about the platform can assist in development. Many of us have the skills needed and are willing to sign agreements with vendors to help push Mikrotik ahead. Yes, then the...
by boldsuck
Sun Feb 17, 2019 4:15 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

@Dave :D 8) Wow, 14 year old woman is interested in coding! Very nice. Crap. Stolen laptop is one of the worst cases. I do not know exactly "New US government tax" but I think that's what Mr. Trump introduced. (He needs money for his wall. In Germany, we are glad that the wall is gone!) Should we st...
by boldsuck
Sun Feb 17, 2019 3:07 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

That script is running fine. I am just wondering about the frequency of the scheduler and maybe other things that were installed with the old installer. OK. Mmmmh, frequency of the scheduler: That makes everyone different. I update every 12 hours. I think Dave updates the blacklists every hour. I s...
by boldsuck
Fri Feb 15, 2019 8:10 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

Can someone sum up the latest script/instructions on how to install the new service?
Script is 4 post higher. :lol: :mrgreen:
by boldsuck
Sat Feb 02, 2019 8:14 pm
Forum: General
Topic: MOAB mother of all blacklists
Replies: 88
Views: 11367

Re: MOAB mother of all blacklists

Buy a raspberry pi3 then install PiHole DNS server on it for free. You dont need to pay any money for MOAB

Or simple use well known squidblacklist.org for free. :mrgreen:
viewtopic.php?f=9&t=104020&p=536327#p536327
by boldsuck
Mon Dec 31, 2018 11:03 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

The service works well, the first payment has been sent.
My Also, ;-)
but where to submit my router's Cloud DNS name?
by boldsuck
Mon Nov 05, 2018 7:21 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

Payment is automated via the Patreon page. Each Tier includes the Tier below it. I've updated the tires on the page to better explain what you get. Perfect thank you. Mikrotik forum logged me off last night again and again. :( I'm using the priority 2 list on an RB2011. Memory is fine. I currently ...
by boldsuck
Sun Nov 04, 2018 6:31 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

The new script will not require any modification, as the server will select the list based on your router's serial number and IP address. As for yearly payments - At this time, I am going to keep it monthly. I don't want to accept a payment for a year of service before I know the service will be ab...
by boldsuck
Sun Nov 04, 2018 6:05 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

squidblacklist.org is not included, as it is a pay service. The IP's they have on the free lists are pretty much duplicates of my list 2. OK, now I'll be clear here ;-) Thanks. Will test how much RAM a RB2011 needed. Only with priority 2 or priority 1 + drop.malicious.rsc PS: SBL Malicious IP Black...
by boldsuck
Fri Nov 02, 2018 2:02 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

It's looking like I will not be able to use 3rd party honeypots, as the GDPR requires companies to allow users to delete any data collected from there. This fucking GDPR :evil: This law harms citizens more than it helps. A shot in the knee. Some good forums has closed and from Germany you can not o...
by boldsuck
Tue Sep 11, 2018 9:40 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84074

Re: v6.44beta [testing] is released!

!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing"; That's good, but we need another channel named oldstable, where 6.42 should go and stay for at least several weeks. At least do make downgrading more seamless when necessary....
by boldsuck
Sat Sep 01, 2018 1:53 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

Unfortunately, I don't have IPv6 yet. The system is designed for it, but I have no routers in IPv6 networks that I can test with. My home internet supports it, but it's so unstable, I don't bother with it. If it helps and the IPv4 sevice is done, I can provide an IPv6 router as honeypot. I get a ::...
by boldsuck
Mon Aug 27, 2018 1:13 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

And domain blacklist?
No only IP based.
But more than 135,000 if you want :D and your router can handle. (I get priority "1" on a RB2011UAS.)

This is a further development of the old project / service:
viewtopic.php?f=9&t=98804
by boldsuck
Sun Aug 26, 2018 5:48 pm
Forum: Announcements
Topic: Security announcement blog
Replies: 120
Views: 38820

Re: Security announcement blog

@npyoung Is there a way to log into these compromised devices remotely? The devices that were compromised today are not reachable using telnet, ssh, or winbox. Telnet?! (You're kidding, right?) ;-) or winbox from WAN?! I think you should read basic about the security configuration of your router. He...
by boldsuck
Wed Aug 22, 2018 12:18 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

Dave does this script replace your old 'blacklistUpdate' script that was scheduled? Must I just schedule this new script as per before?
Hi, I'm not Dave but:
Yes and Yes :)
by boldsuck
Mon Aug 20, 2018 3:22 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 25205

Re: Blacklist Filter (Development Topic)

As you can tell, I've slowed down on development. Out of the 100+ people who filled out the notification form, more than 60% says they will not pay for this type of service. Only about 15 say they will pay a commercial product. So, I'm going to take my time with it and try earning some income in ot...
by boldsuck
Fri Aug 17, 2018 11:00 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113454

Re: v6.43rc [release candidate] is released!

Funny thing after Version 6.43rc56 , my DHCPv6 client is showing in red in winbox, even though everything is working, and my ipv6 connectivity is ok. Still after after re-creating it from scratch... Not a big deal, but... Same in Webfig and Terminal. DHCPv6 client Flag = I - invalid. IPv6 connectio...
by boldsuck
Sun Sep 03, 2017 4:29 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

Yea I got that... What format does the file need to be in?
Hint:
You can change the "Encoding" under "Settings"
UTF-8 is almost always right nowadays.
by boldsuck
Wed Aug 30, 2017 1:56 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

- ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1); RB2011UAS v6.41rc1 - rc20 IPv6 address assignment is broken :-( State is 'invalid' Just for INFO: MikroTik have managed to reproduce the problem. The error only occurs with me and a few others. MikroTik are working on it. But I ...
by boldsuck
Wed Aug 02, 2017 11:28 pm
Forum: Beginner Basics
Topic: Backup All Mikrotik Configuration
Replies: 13
Views: 84526

Re: Backup All Mikrotik Configuration

For all who are searching the answer
... now this post got updated:
Yes Sir, thanks. After 8 years, we are still looking for the download button. And also the microtiki wiki. :)

Why you have onnoossendrijver negatively assessed, I do not understand.
by boldsuck
Wed Aug 02, 2017 10:44 pm
Forum: General
Topic: Export verbose or export compact
Replies: 9
Views: 2453

Re: Export verbose or export compact

I no longer understand the meaning and difference in exports, how best to save the settings before the firmware ...
For the same device?!
Use backup and not export, as sob already wrote.

https://wiki.mikrotik.com/wiki/Manual:C ... tem_Backup
by boldsuck
Wed Aug 02, 2017 8:42 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) ippool6 - try to assign desired prefix for client if prefix is not being already used; So how do I use this feature? Suppose my pool prefix is 2001:db8:abcd::/48 and I wish to assign subprefix 1234::1 /64 from this pool onto interface ether1. How do I enter this? Suppose further that I wish to d...
by boldsuck
Tue Aug 01, 2017 8:08 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1); To the half it goes. ;-) [admin@migo] /ipv6 address> add address=::1/64 from-pool=netdsl-ipv6 interface=bridge-local advertise=yes [admin@migo] /ipv6 address> print Flags: X - disabled, I - invalid, D - dynamic, G - global, L -...
by boldsuck
Sat Jul 29, 2017 1:32 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

- ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1); RB2011UAS v6.41rc1 - rc20 IPv6 address assignment is broken :-( State is 'invalid' Just for INFO: MikroTik have managed to reproduce the problem. The error only occurs with me and a few others. MikroTik are working on it. But I ...
by boldsuck
Thu Jul 27, 2017 1:09 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

RB2011UAS v6.41rc3 Bridge hardware offload is fine. :D IPv6 address assignment is broken :-( State is 'invalid' /ipv6 address add address=::1/64 from-pool=netdsl-ipv6 interface=bridge-local advertise=yes [admin@migo] /ipv6 address> print Flags: X - disabled, I - invalid, D - dynamic, G - global, L -...
by boldsuck
Fri Jul 21, 2017 6:20 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 105948

Re: Blacklist Filter update script

Thank you for the work and offering the service to us other MikroTik users. I found that several users were leaching the large list and rebranding it as their own. They were also trying to probe the server side for exploits. Again, I offer my list as a free service to the MikroTik community. If peop...
by boldsuck
Sat Jul 15, 2017 10:20 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36185

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Unable to export configuration to a file Is anyone else having this issue? I can run /export from the CLI, but if I do: /export file=x (or /export file="x") No files get created. I had the same problem yesterday. RB2011UAS :-? I thought I was too stupid to find the file. ISSUE since rc38 Webfig: No...
by boldsuck
Wed Jul 05, 2017 10:44 pm
Forum: Beginner Basics
Topic: Run Winbox on a Raspberry Pi?
Replies: 21
Views: 8051

Re: Run Winbox on a Raspberry Pi?

I have never seen Winbox. I think Webfig is the same, only universal for any OS that has a web browser. Who needs Winbox? Right, who needs Winbox... said the guy that in the same paragraph admits he hasn't even seen it ! Asked the guy! You saw the question mark? What can Winbox more or better than ...
by boldsuck
Mon Jul 03, 2017 8:36 pm
Forum: Beginner Basics
Topic: Run Winbox on a Raspberry Pi?
Replies: 21
Views: 8051

Re: Run Winbox on a Raspberry Pi?

This is not free
But is cheap and works great
I think ErfanDL means: 'Free as in freedom, not free as in beer'

Exagear is not open source, AFAIK.
by boldsuck
Mon Jul 03, 2017 8:15 pm
Forum: Beginner Basics
Topic: Run Winbox on a Raspberry Pi?
Replies: 21
Views: 8051

Re: Run Winbox on a Raspberry Pi?

Why not releasing debian package? +1 +1 +1 ... as it makes ubnt deb http://www.ubnt.com/downloads/unifi/debian stable ubiquiti :-) Just kidding. I have never seen Winbox. I think Webfig is the same, only universal for any OS that has a web browser. Who needs Winbox? I think encrypted access with Wi...
by boldsuck
Sun Jul 02, 2017 11:52 am
Forum: Beginner Basics
Topic: Forget my password and username, help
Replies: 1
Views: 371

Re: Forget my password and username, help

Reset To Factory Default Settings.
The administrator account can also be reset with this way.
by boldsuck
Tue Jun 13, 2017 9:44 pm
Forum: Beginner Basics
Topic: Block DST-NAT RDS Users
Replies: 10
Views: 1594

Re: Block DST-NAT RDS Users

Another way or complementary:
Customers only IP src-address-list whitelist in your dst_nat rule.

Only the IP's from 2 German ISP are allowed for ssh connect. :D No scans from China more.
by boldsuck
Tue Jun 13, 2017 8:19 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 45803

Re: v6.40rc [release candidate] is released!

Why were the RAW rules omitted? There are problems because of the dynamic IPsec rules? On RB2011 from v6.40rc8 - rc20 After System Reset_Configuration and new first setup on RB2011 + adding an pppoe-out client. /system default-configuration /ipv6 firewall filter add chain=input action=drop in-interf...
by boldsuck
Tue Jun 13, 2017 6:56 pm
Forum: Scripting
Topic: DynDNS Update Script for EasyDNS, that cares about TOS and return status.
Replies: 0
Views: 488

DynDNS Update Script for EasyDNS, that cares about TOS and return status.

Hello, because Oracle bought DynDNS I'm changed to easyDNS. :D Perhaps someone can use the update script. I found none for easyDNS in the MicroTik-wiki. Runs for 12 months on an RB2011UAS. Currently on RouterOS 6.39.2 & 6.40rc20. Thanks to -Greg (gslop) for his script. 8) I've only adjusted somethin...
by boldsuck
Mon Jun 12, 2017 7:49 pm
Forum: Beginner Basics
Topic: Default filter firewall
Replies: 4
Views: 12255

Re: Default filter firewall

5 ;;; defconf: accept established,related chain=forward action=accept connection-state=invalid log=no Something happened with rule 5. Your clients do not come online via IPv4. Read your comment again exactly. http://www.iptables.info/en/connection-state.html On youtube are many good videos of MUM C...
by boldsuck
Mon Jun 05, 2017 7:35 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 45803

Re: v6.40rc [release candidate] is released!

New default-IPv6 firewall from v6.40rc15 /system default-configuration print: /ipv6 firewall { address-list add list=bad_ipv6 address=::1 comment="defconf: lo" address-list add list=bad_ipv6 address=fec0::/10 comment="defconf: site-local" address-list add list=bad_ipv6 address=::/96 comment="defconf...
by boldsuck
Thu May 25, 2017 8:28 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 45803

Re: v6.40rc [release candidate] is released!

Thanks, maybe you have more suggestions what to add or change? I've been looking at the new default firewall config - and the below doesn't seem quite right: /ip firewall raw add action=drop chain=prerouting comment="defconf: drop the rest" This rule drops all traffic and nothing is passed to the c...
by boldsuck
Wed May 24, 2017 8:56 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 45803

Re: v6.40rc [release candidate] is released!

Finally someone actually tried default configuration :)) That was the first thing I did after reading change log 6.40rc8. Finally someone actually tried default configuration :)) Next RC will have rule set improvements. Yes, please add: /ipv6 firewall filter add action=accept chain=input comment="A...
by boldsuck
Sun Feb 05, 2017 9:08 pm
Forum: General
Topic: Tutorials blogs and other helpful RouterOS resources
Replies: 65
Views: 57166

Re: Tutorials blogs and other helpful RouterOS resources

Hello at all, I tried to sort the noted links. Thanks for the work. :wink: Found a new one today and I read with interest these chapter: 8) https://www.manitonetworks.com/mikrotik/2016/5/24/mikrotik-router-hardening Very good description & easy to understand. (I'm german) E - ENGLISH https://www.ma...
by boldsuck
Wed Nov 09, 2016 9:39 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 75210

Re: v6.38rc [release candidate] is released

This was working fine until 6.37 then I upgraded it to the first v6.38rc and all IPv6 addresses are gone. (interface address, that address in the firewall, and default route) They now show like ::/0 Same here: RouterOS v6.38rc25 (testing) on RB2011UAS (mips) ISSUES: IPv6 addresses are not shown cor...
by boldsuck
Sun Sep 25, 2016 7:40 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

HTC one m7 - Android 5.0.2 Google Nexus 10 - Android 5.1.1 In version 0.0.35 ISSUES FIXED: 8) IPv6 addresses in System/Users & IP/Services 'Allowed Address' are shown correctly, now. RouterOS: 6.36 & 6.37(current) Thanx for the nice app. On 10" and bigger devices 'Firefox & Webfig' is just as fine.
by boldsuck
Sun Sep 25, 2016 7:24 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 34910

Re: v6.37 [current] is released!

disable the "wireless" package, mark as "scheduled for disabled", reboot and the package is enabled again.... another bug? Can confirm that. No longer possible to disable wireless, e.g. on a CHR which has no wireless and no need for CapsMAN. Maybe it is caused by the wireless package migration on u...
by boldsuck
Mon Sep 05, 2016 9:47 pm
Forum: Scripting
Topic: Webfig with HTTPS support?
Replies: 22
Views: 16042

Re: Webfig with HTTPS support?

Mmmmh, no problems here since Jears with CaCert.org & ROS current. Just switched to: 6.37rc27 -> https webfig login is fine as ever :D I've generated a .p12 file for import to my Tikl. ~$ openssl pkcs12 -export -inkey mikrotik_example_com.key -in mikrotik_example_com.crt -certfile CAcert.org.crt -ou...
by boldsuck
Sat Aug 06, 2016 8:20 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

FEATURE WISH:

Hide some menu items like 'Design Skin' in Webfig.
by boldsuck
Sat Aug 06, 2016 7:11 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

HTC one m7 - Android 5.0.2
Google Nexus 10 - Android 5.1.1
In version 0.0.34 the same
ISSUES:

IPv6 addresses in System/Users & IP/Services 'Allowed Address' are not shown correctly.
Example: fe80::/10 looks 0.0.0.0/0

RouterOS: 6.36 (current)
by boldsuck
Sat Jul 30, 2016 3:52 pm
Forum: General
Topic: Report "Delegated-IPv6-Prefix" attribute for PPPoE
Replies: 200
Views: 39517

Re: Report "Delegated-IPv6-Prefix" attribute for PPPoE

accel-ppp 1.11.0 is released, my PPPoE servers are aging RB1100AH's and I was hoping to replace them with nice new CCR's but now considering setting up good old Debian boxes with accel-ppp + BIRD (to redistribute PPPoE clients IPs by OSPF). Ubiquity Edge-Router (EdgeOS) are Debian / Vyatta based. Y...
by boldsuck
Sat Apr 30, 2016 9:26 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Tik App, MikroTik android utility ALPHA test

Thank you for this app. I use it on: HTC one m7 - Android 5.0.2 Google Nexus 10 - Android 5.1.1 This Alpha testing app has already a lot of features and full ipv6 support, you can't find this on all the other 'stable' and paid apps in the Playstore for Android devices. IPv6 addresses in System/Users...
by boldsuck
Wed Oct 23, 2013 10:37 pm
Forum: Beginner Basics
Topic: Setup pppoe client on Mikrotik
Replies: 12
Views: 26446

Re: Setup pppoe client on Mikrotik

kadmos asked that too. Check NAT. Your pppoe interface needs a NAT rule.

Ciao Marco!
by boldsuck
Wed Oct 23, 2013 8:30 pm
Forum: General
Topic: DynDNS update script
Replies: 26
Views: 12287

DynDNS update script

1) Let me know if it worked or not. Perfect, yeah, thank you very much. The only script I've seen that cares about DynDNS TOS and return status. It's a matter of respect to do this. 2) What hardware it was on: RB2011UAS 3) What ROS version: 6.1 -> 6.18 4) Comments or suggestions. Finally, if you ada...