Huh... I disabled 'Allow x86-64' in System -> Resources -> Hardware, and now CHR on ESXi sees only 1 CPU core and no Ethernet (VMXNET3). How can I enable 'Allow x86-64' from console? just change the interface to E1000 and then you'll have access. then add the x86-64 option and then change the inter...

Hello, Where can I find the last CHR vmdk disk?. Do I need to convert the img file to a vmdk? Regards You can download the .img file and using "StarWind V2V Converter" you can convert it to anything you'd like (its free). http://www.mikrotik.com/download/share/chr_6_31rc16.img Regarding F...

The current ROS v6.x doesn't support our (me and my friends) NICs: Solarflare SFN5122F/SFN6122F Our NIC has support for: "Linux® 2.6 and 3.x Kernels (32 bit and 64 bit) for the following distributions: RHEL 5, 6, 7 and MRG. SLES 10, 11 and SLERT." And I also checked and its working in debi...

Well now with the new release 6.30:

*) pptp & l2tp & sstp client: support the case were server issues its tunnel
ip address the same as its public one;

this fixed the issue.

What happened that they suddenly fixed it?
because i wasnt able to see any other post regarding that issue.

Hello everyone. I'm using PPPOE connection, and on top of that i'm trying to connect to L2TP server. This ISP i'm connecting to over L2TP has 2 LNS: lets say first one is 5.5.5.5 and 2nd one is 6.6.6.6. When you connect to the 5.5.5.5 LNS, you get gateway of 5.5.6.6 , in this case i'm able to connec...

i'd love that as well !

i'd love that as well!

Hello. On the website http://routerboard.com/RB750GL it says with 25 ip filter rules the throughput on 1518B packets, the speed is 462Mbps. Is that ingress+outgress speeeds? meaning the client sees 231Mbps? or maybe its even ingrees+outgress of all the interfaces? meaning the client sees 115Mbps (in...

hi, i'm still looking for a solution.

anyone can help me please?

Hello everyone. I'm using PPPOE connection, and on top of that i'm trying to connect to L2TP server. This ISP has 2 LNS: lets say first one is 5.5.5.5 and 2nd one is 6.6.6.6. When you connect to the 5.5.5.5 LNS, you get gateway of 5.5.6.6 , in this case i'm able to connect and get RX and TX outside....

nvm, i was able to understand and figure it out my self.
and with that i was able to test my x86 setup.
using 2 more pc running from DOK x86 routerOS.

with P4 3.06Ghz HT, 2GB 800Mhz, HP NC360T Dual Port PCI-E x4
TCP test, 1600Mbit (total 3200Mbit, 360k pps) while the CPU was at only 65%.

based on this page: http://wiki.mikrotik.com/wiki/User_benchmarks test 1 and test 2, does it mean they took 3 routers and test like that? 1 client, 1 router, 1 server? i dont really understand what does it mean "against bridge interface" are they trying to test there the throughput of WAN ...

i guess only via static route?

do i need to reset-configuration if im moving from 6.3 to 6.4 with upgrade?

you can use the tool Fetch
>tool fetch
and after that u need to write the URL of the file u wanna download, find a link from your isp and try to download it using the router.

so i did few tests, please bare with me. (let me explain in short my network) i got VDSL connection atm, this VDSL modem is connected to the wan port. the WAN IP i setup is 10.0.0.8/24 and the modem IP is 10.0.0.138. the LAN is setup for 192.168.0.1. here's some pictures: http://img853.imageshack.us...

hello everyone. i got my routerOS 6.3 up and running with VDSL connection. and soon they gonna upgrade in our city from 100mbit to 1Gbit connection. im running RouterOS x86 on Pentium 4 @3.06Ghz HT, 2GB of RAM , with 1 PCI-E 1Gbit adapter and 1 PCI 1Gbit adapter. how should i test WAN to LAN through...