MikroTik

norepto

In summary, there is no problem if the allowed IP addresses in the peers of two different WireGuard servers are the same, as long as they are associated with different servers. This is because WireGuard identifies peers by their public keys, not by their allowed IP addresses. Therefore, even if two ...

norepto

Hi Llamajaja, So, in the CHR, can I set up two WireGuard servers using two different ports, create a peer for each of them with the same subnet, and there wouldn't be a problem? CHR Server Wireguard MAIN: 10.254.102.1/24 port 13235 CHR Server Wireguard BACKUP: 10.254.103.1/24 port 13236 CCR A: 10.25...

norepto

Hello Mantouboji. So I can't have two remote points with the same IP assignment and decide through routes which one I want to access? Maybe I'm totally confused about the "peer" configuration; I mean, in "allowed address," I understand that it's only to indicate which networks ar...

norepto

Hi Anav, Now i have a copy of one wireguard peer in router A and B with vrrp script to enable it. The export of the CHR have around 30000 lines... The clients A and B maybe 300. The extrange thing is the first hop with wireguard, always is .126 instead .26. I go to try to replicate in small laborato...

norepto

Hi Anav, With L2TP+IPSEc i have 1 connections established from each router (Peer A and B) to the CHR if the A router fails the route on the CHR gone to the backup route stablished. L2TP CHR 10.30.40.1 A 10.30.40.26 Route distance 1 Active (established) gw 10.30.40.1 B 10.30.40.126 Route distance 2 B...

norepto

Hi Anav: https://1drv.ms/i/s!AiKNjZkPqVGVyfUrl7M_0ek_Q578Bg?e=MZBc2v CHR /interface wireguard peers add allowed-address=10.254.101.26/32,10.26.0.0/16 client-address=10.254.101.26/32 comment="XXXXX_ Main" \ interface="Wireguard Tracks" preshared-key=\ "XXXXXXXXXXXXXXXXXXXXXXX...

norepto

Hi all i have this setup: Wireguard server (CHR) 7.14.2 Wireguard IP 10.254.101.1/24 Wireguard Peer A: Allowed address 10.254.101.26/32 10.26.0.0/16 Wireguard Peer B: Allowed address 10.254.101.126/32 10.26.0.0/16 Route Dst. Address: 10.26.0.0/16 GW 10.254.101.26 distance 1 Check Gateway ping (black...

norepto

The querier is in another switch s6730 but the css610 needs to be working with the ver2? anybody knows the details of the right values? ty.

norepto

Hi all, Does anyone knows the values of the IGMP-Snooping on a CSS610. I have some of them connected to a Huawei S67xx and i need to check if the paremeters are the same: IGMP Snooping is Enabled IGMP Version is Set to default 2 IGMP Query Interval is Set to default 125s IGMP Max Response Interval i...

norepto

Hi, is already done. Ty.

norepto

Hi all, I have a router with 4 different IP's in the same interface on the same subnet. (Bridge A) Public 192.168.41.101/24 192.168.41.102/24 192.168.41.103/24 192.168.41.104/24 Internally i have 1 IP (Bridge B) LAN 192.168.21.1/24 And 4 Clients (Bridge B) LAN 192.168.21.101/24 192.168.21.102/24 192...

norepto

Dude, remote client stop with error 10053 when we try to enter on a device in the dude client.

norepto

Hi, CCR1036 V7.1 same situation for me including direct routing... FTP passive mode doesn't work....

norepto

Any news?

norepto

Hi all,

Now i can manage the devices but icmp to IP of the device is very unstable...

norepto

Below you can download the SwOS 2.13rc5 version for the CSS610-8G-2S+ device. https://box.mikrotik.com/f/2d3d33561426401a8697/?dl=1 It should improve the management connectivity for the SFP+ interfaces. Other fixes and improvements are coming, but I cannot comment when the stable version will be re...

norepto

Can you please share the RC somewhere?

Hi,

I go to ask MKT support first if i can share de direct link from them or i can share by my self....

norepto

Hi all,

I was in contact with MKT support. They had email me with a RC release. It works and i can manage the switch by the SFP+ but i'm waiting for a final release with the corrected bug...

norepto

Guys, seriously? This is NEW product. Not really tested by earth and fire. If you're planning a commercial install based on an untested product - it's not MKT problem, it's your risk management. you missed the point completely bugs do exist, in any product, new or not new. what we are criticizing i...

norepto

Hello Same issue I contacted technical support: Description: Problem: It is not possible comunicate with device CSS610-8G-2S+ through SFP+ ports (I,II) [Mikrotik S+RJ10 /r2]. Web interface is inaccesible, PING to device failed, (DHCP lease failed) and static IP on the device do the same. Standard 1...

norepto

Same problem... I have 33 new units of this model. My dead line is in 7 days. If i don't have any solution i go to return the units. return them so Mikrotik support will learn what you get when someone submits a very annoying (and easy to fix) bug and their answer is "NO ETA" In the last ...

norepto

Same problem... I have 33 new units of this model. My dead line is in 7 days. If i don't have any solution i go to return the units.

norepto

Hi all, I did the conf like that: https://i.postimg.cc/ts5yPB8y/System.jpg https://i.postimg.cc/phj6QTy8/VLAN.jpg SFP1+ Trunk (VLAN69) Eth1 Trunk (VLAN69) Eth8 Acces (VLAN69) https://i.postimg.cc/zVG46qQm/VLAN1.jpg When the CSS is connected by the port eth1 to another swith (trunk) everything works ...

norepto

+1 IGMP Snooping

norepto

RouterBOOT booter 3.22 RouterBoard 493G CPU frequency: 680 MHz Memory size: 256 MiB NAND size: 128 MiB Press any key within 2 seconds to enter setup.. writing settings to flash... OK loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... failed to open /dev/flas...

norepto

The same for 10 rb493g... but with one microsd installed it works. WHAT is HAPPENING??¿!?!!?!? if not installed... loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 d00be000 cfc04d60 $ 4 : d00be800 00000000 00000000 8...

norepto

in some cases it would be helping to disable the auto-negotiation on on or both sides. Thanks, I'll try that out next I'm in front of them or get some new ones. As said they are in production now so not going to play with them :) I have similar problem, i resolved it upgrading to 6.13 and after i m...

norepto

Solution.

I make a factory defaults and just later start to work fine.

Thanks.

norepto

I have this router with MikroTik S-3553LC20D This is using LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. Is the other side (Meridian MS8GT4GX4) also supporting this? (T1310nm/R1550nm) Or only plain Sx or Lx standards!? Yes and we are trying with pair of mS-...

norepto

Hello, I have this router with MikroTik S-3553LC20D pairs, i put the SFP blue one in the router and in the other site i have the yellow one in a Meridian MS8GT4GX4. When the fiber is connected i see ALL OF THE 4 SFP LIGHTS ON BUT NOT FLASHING and there is ONLY ONE SPF MODULE plugged in the mikrotik...

norepto

I have this similar router with MikroTik S-3553LC20D pairs, i put the SFP blue one in the router and in the other site i have the yellow one in a Meridian MS8GT4GX4. When the fiber is connected i see SFP LIGHT ON and i don't have connection between them. In the Winbox i see the interface registered ...

norepto

The led's problem, like a beginner... System Led's... but still the problem with the connectivity... only TX... link up... nothing more...

norepto

Hello,

I have a PPPoE server in a CCR1016-12S and the client in a CCR1009-8G-1S. Everything work fine but when i make a bandwindth test only reach about 150Mbps UDP in both. I try with different ports and with different ethernet cables...RouterOS 6.13...

Thank you.

norepto

Hello, I have this router with MikroTik S-3553LC20D pairs, i put the SFP blue one in the router and in the other site i have the yellow one in a Meridian MS8GT4GX4. When the fiber is connected i see ALL OF THE 4 SFP LIGHTS ON BUT NOT FLASHING and there is ONLY ONE SPF MODULE plugged in the mikrotik ...

norepto

Sorry for my english, this is my problem...

433AH ver 6.4+CM9+Radar detect=Kernel failure and restart in loop...

Search found 35 matches

Re: Wireguard routing.

Re: Wireguard routing.

Re: Wireguard routing.

Re: Wireguard routing.

Re: Wireguard routing.

Re: Wireguard routing.

Wireguard routing.

Re: CSS610 Multicast IGMP-Snooping parameters

CSS610 Multicast IGMP-Snooping parameters

Re: Same interface, same subnet, 4 IP's NAT from LAN

Same interface, same subnet, 4 IP's NAT from LAN

Re: v7.7 [stable] is released!

Re: Issue with FTP passive mode

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

Re: CSS610-8G-2S+ Management Access from SFP+ Port

CSS610-8G-2S+IN SFP+ Management acces problem from trunk SFP1+

Re: IGMP Snooping

Re: RouterBOARD 493G - Devices seems to be dead.

Re: RouterBOARD 493G - Devices seems to be dead.

Re: CCR1036-8G-2S+ SFP Problems

Re: CCR1036-12G-4S SFP Problem.

Re: CCR1036-12G-4S SFP Problem.

Re: CCR1036-12G-4S SFP Problem.

Re: CCR1036-8G-2S+ SFP Problems

Re: CCR1036-12G-4S SFP Problem.

PPPoE performance

CCR1036-12G-4S SFP Problem.

Ver 6.4