After upgrading to v7.14 I lost connectivity between OpenVPN server and clients in Ethernet mode. The connection is established normally and automatic routes are created, but still peers are inaccessible. Anyone experiencing similar behaviour? Edit: It's the same with v7.15beta4. Reverting back to v...
I tried to upload everything that should be necessary to flash the modem here: https://1drv.ms/f/s!AmHD_RlSyqfbj40ag_0H2De8ufNSxQ?e=whHfzA Brief instructions: 1. Plug the modem to a PC 2. Find the respective hidden disk drive that was assigned to the modem - you can find it either in the safe discon...
Hi siddadav! The idea is that the option to adjust the IP type could be present in the web interface, but hidden in the HTML code. If you're using Chromium-based browser, you can right-click at the location where the option is supposed to be present, click on "Inspect" and look for the IP ...
I've the issue also, do you've how to fix the issue?
It's already a known issue that would probably be corrected in the next firmware release.
If you cannot wait, the only currently available option is to downgrade.
Hi, my E3372 stopped working since 7.13. actually at bootup it goes up and down twice in same second but after there is no lte device visible. Can you help me? Hi, actually I also noticed that the classic Huawei E3372h modems stopped working on v. 7.13. This thread, however, is for another type of ...
The thread is old, but this might help someone - in the profile setting there is a hidden option to disable IPv6: settings.png In order to reach it, you'll have to plug the modem to a PC, and to use the developer console of your browser to unhide it, to set it to IPv4 and save the profile. That shou...
Yes, firmware version H057SP9C983 is already reported to work OK. The problem is that some modems do not receive that update and there is no currently known way to manually install it. Would you please check what is the "Configuration file version" of your modem? Edit: I think that modems ...
I have no idea if it has any relation with the beta, but one RB951Ui-2HnD lost its wireless card after installation of 7.13beta2.
I had to Netinstall in order to restore the wireless. Unfortunately I didn't make a Supout.rif file... Sorry for that...
I also wrote them several e-mails, but they didn't reply to any of them... Edit: In one of the documents published on https://brovi-tech.com/ I saw a Huawei e-mail address for support inquiries in Russia. I decided to give it a try and sent them an e-mail in Russian. They responded very fast, asked ...
Could anyone provide the update files or instructions for updating to H057SP9C983? Via WebUI it seems like there is no newer version than the installed available. I've searched everywhere for an update file, but it seems that it doesn't exist. All the records I find say that the modems were updated...
Thank you, Cirick, for the feedback!
Now I just need to figure out how to update my E3372-325 to H057SP9C983, as it claims that there is no newer software version available
Hi multypla!
If you want that the MikroTik just bridges the wireless and Ethernet interfaces you need to disable the DHCP server on the router and include the wifi interface in the bridge.
You should also remove the masquerade rule in the firewall.
The server was 9.9.9.10. I switched to 1.1.1.1 and now I have the following: 12:15:31 dns,packet question: p4p.arenabg.com.:AAAA:IN 12:15:31 dns query from 192.168.11.100: #469400 p4p.arenabg.com. AAAA 12:15:31 dns,packet --- got query from 192.168.11.100:20632: 12:15:31 dns,packet id:9ebf rd:1 tc:0...
Hello everyone! From time to time my MikroTik logs the following message: dns,warning DoH server response not OK: 502: no downstream server available I cannot find any info on the topic. 22:11:00 dns,packet --- got query from 192.168.11.100:17596: 22:11:00 dns,packet id:609 rd:1 tc:0 aa:0 qr:0 ra:0 ...
Thank you very much for your reply! Actually the client device does not experience LTE session drops and never loses connection with the internet. However the gateway through which the traffic exits the private network of the ISP is changing extremely often - every 2-3 minutes. On each change the tu...
Hello everyone! We have approximately 50 MikroTik routers distributed around the country that are set up to connect to a VPN server running on MikroTik router in our main office. Those VPN tunnels are used only for remote management of the clients as many of them are behind NAT - during most of the ...
Hello everyone! I installed a CRS106-1C-5S switch with 5 MikroTik SFPs, but the temperature of the SFPs unfortunately is very high. Yesterday one of the links was shut down and was restored after we restarted the switch. I'm concerned that it might be because of the temperature. Do you have experien...
I would personally do the following (with Winbox starting from stock configuration): 1. Connect to a LAN port of the RB2011 with cable 2. Exclude the Wi-Fi interface from the bridge - Bridge -> Ports -> Delete the Wi-Fi interface 3. Include the Ether1 interface in the bridge - Bridge - Ports -> Open...
Thank you for your feedback ak4020! In fact I was able to route the PPTP client to my backup WAN by placing a static route to the IP address, but that creates a couple of issues; 1. When the PPTP server is a hostname with a dynamic IP, the static route makes any sense only until the IP address of th...
Hello everyone!
I have a Routerboard with two independent, masqueraded WAN connections - main and backup. I would like to set up a PPTP Client interface, but to route it through the backup WAN despite of the primary WAN availability.
Which would be the most elegant way to do that?
Hello! I posted no update, because I had other issues with my NAS (failed SSD) and I managed to make some more tests just yesterday. I can confirm that enabling flow control improves the situation a lot. The most probable reason for the issues, however, is driver instability of the rtl8125b chipset ...
I tried all three combinations, but that doesn't seem to have effect. With flow control switched on I'm able to reach 1 Gbps but it's not very stable - it drops from time to time. When I use the RB260GS or the TP-Link the result is extremely stable 1 Gbps. The CPU load never reached 10% so that's no...
Hello! Thanks again for all the inputs. I did some more tests with an old gigabit TP-LINK WR1043ND and with just a switch - RB260GS. I have no explanation on the results: With or without hardware offloading on both my RB4011 and RB2011 I manage to reach something around 150-200 MBit/s With direct ca...
Thank you very much for the inputs! I made some more tests, but I cannot understand the results: 1. I reset the configuration of the RB4011. I leave only two devices connected to the bridge and I receive these results: 4011_default_conf.jpg 2. I set the protocol to none and I get the same results: 4...
Hello everyone! After installing my new NAS I was very surprised to find out that the maximum bandwidth between the devices connected to the LAN bridge of my RB4011iGS+5HacQ2HnD-IN is extremely low with iperf results rarely exceeding 150 Mbit/s. At the same time WAN speed is almost 1 Gbit/s! I decid...
I finally received feedback from the support!
I updated to v6.43rc56 and this seems to fix the functionality to send and receive through the console! The Winbox v3,16 tool still doesn't work (maybe the new version), but that's not so important.
Hello antonsb, Thanks for your input. Unfortunately this doesn't resolve the issue: [admin@MikroTik] /tool sms> set port=lte1 [admin@MikroTik] /tool sms> send phone-number=0882340800 message=test failure: missing port value [admin@MikroTik] /tool sms> send phone-number=0882340800 message=test port=l...
Hello! Is there any progress on that topic, as I am having the exactly same issue - lte modem is not listed under /port print and I cannot send SMS? I updated the RouterOS (6.42.4), board firmware and modem firmware (MikroTik_CP_2.160.000_v008). This is a huge issue for me, as I'm using a prepaid se...
Hello everyone, I am trying to set up my MikroTik router to use 2 WAN connections with the following requirements - one of the connections should be primary, and the other one - secondary - all outbond traffic should pass through the primary WAN connection (when available) and if there is a problem ...
My ISP is filtering all traffic through port 123 and I cannot automatically sync the date and time of my RouterBoard.
It is very annoying...
Can you give me an idea for a workaround (if such actually exists...)