Community discussions

MikroTik App

Search found 21 matches

by mortar8
Wed Dec 14, 2016 11:14 am
Forum: Wireless Networking
Topic: CAPsMAN - set management interfaces
Replies: 1
Views: 508

Re: CAPsMAN - set management interfaces

Ok so maybe someone can answer me on what means of communication does CAPsMAN have, because I could not find that exact information ?
In services there is 5246,5247/udp. What about L2 communication ?
by mortar8
Mon Dec 12, 2016 11:54 am
Forum: Wireless Networking
Topic: CAPsMAN - set management interfaces
Replies: 1
Views: 508

CAPsMAN - set management interfaces

Hello. I want to limit interfaces on which CAPsMAN communicates. Is this configurable via CAPsMAN or should I set filters ? The problem now is that CAPsMAN can connect devices via WAN. I don't wan't that of course. How to limit management interfaces ? On the side - i'm wondering if wifi passwords ca...
by mortar8
Thu Nov 03, 2016 2:28 pm
Forum: General
Topic: OpenVPN CRL [Certificate revocation list]
Replies: 12
Views: 8640

Re: OpenVPN CRL [Certificate revocation list]

I can confirm it working on 6.36.2 but not exactly straight. There is a bug in GUI that causes ca crl host to be empty after signing. When You sign a certificate there is a field for CRL host and it does nothing. Signing from terminal works fine and CRL host is set. Then the revocation of certificat...
by mortar8
Sun Sep 25, 2016 11:37 pm
Forum: General
Topic: Port forwarding with (reverse?) NAT
Replies: 8
Views: 2423

[solved] Re: Port forwarding with (reverse?) NAT

Well,

it took some time. I've skipped the first case but lately I was faced with the same problem elsewhere. I am gladly reporting that those rules do what they are supposed to.
Thanks again for all of your help.
by mortar8
Sat Sep 03, 2016 11:44 pm
Forum: Wireless Networking
Topic: Prioritization between Virtual Access Points
Replies: 0
Views: 396

Prioritization between Virtual Access Points

Hello. Is there a awy to assign priorities to virtual APs working on the same wireless interface ? I have main wlan, guest vap and service vap and would not like that the guest and service vaps take too much bandwidth and increase latency of main AP. My first guess is DSCPs and enabling WMM but righ...
by mortar8
Fri Jun 24, 2016 1:36 pm
Forum: General
Topic: Guide to configure IPSEC for public IPs (peer IP within that range)
Replies: 1
Views: 471

Guide to configure IPSEC for public IPs (peer IP within that range)

Hello. I would like to configure : -an IPSec tunnel between 2 routers -first router is plain and simple - public IP and LAN (say WAN 80.1.1.1 LAN 10.0.0.0) -target IP range for the other end is a public range (say WAN 140.1.1.0/24), don't care about LAN -second router has IP within that range (ie 14...
by mortar8
Fri Apr 29, 2016 2:01 pm
Forum: General
Topic: Very low TCP transfer speed on IPIP+IPsec on CCR1009 and CCR1036
Replies: 11
Views: 5100

Re: Very low TCP transfer speed on IPIP+IPsec on CCR1009 and CCR1036

I wish I had a more detailed post to direct you to, but check out this for now: http://forum.mikrotik.com/viewtopic.php?p=535450#p534818 Likely what you are seeing is an issue with the hardware encryption driver that causes problems with packet delivery. With TCP, this often results in poor single ...
by mortar8
Tue Dec 29, 2015 7:15 pm
Forum: General
Topic: Port forwarding with (reverse?) NAT
Replies: 8
Views: 2423

Re: Port forwarding with (reverse?) NAT

Thanks for the explanation. Those sections were always quite a puzzle for me.
I'll drop a line when i'll be able to sniff out what's going on.
by mortar8
Tue Dec 29, 2015 1:58 pm
Forum: General
Topic: Port forwarding with (reverse?) NAT
Replies: 8
Views: 2423

Re: Port forwarding with (reverse?) NAT

I think it replaces src IP with WAN IP of router. Here's an excerpt from log. I logged both rules and added forward logging in filter based on dst address TARGET_IP. It could be out of order due to way mikrotik logs things. I bolded a line from the forward filter, where You have WAN_IP->TARGET_IP. D...
by mortar8
Tue Dec 29, 2015 1:23 pm
Forum: General
Topic: Port forwarding with (reverse?) NAT
Replies: 8
Views: 2423

Re: Port forwarding with (reverse?) NAT

Thanks for the reply. So two rules would be needed ? Dst-nat and src-nat after that ?
by mortar8
Tue Dec 29, 2015 1:02 pm
Forum: General
Topic: Port forwarding with (reverse?) NAT
Replies: 8
Views: 2423

Port forwarding with (reverse?) NAT

Hello. I have a rather unique situation. I have to forward port from WAN to LAN, but I have to assure the LAN host gets connection from LAN IP. The reason behind this is complicated and boils down to this, that the target host uses different route back to original internet IP. Please don't elaborate...
by mortar8
Wed Sep 16, 2015 2:00 pm
Forum: General
Topic: Switching features comment
Replies: 0
Views: 704

Switching features comment

Hello.
Will there be an option to add comments to switch features ?
On CCS the switching can become quite complex with 24 ports and many VLANs that are set up in many places, I'm unable to add comments to them. Tried with Winbox 3RC12 and ROS 6.28.
by mortar8
Mon Jun 15, 2015 9:33 am
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144049

Re: Winbox 3 RC

About RoMON. I've added a gateway host - I can connect to it with plain winbox. I've enabled RoMON on a switch behind it and on the gateway. I can discover both from eachother. When I click "connect to RoMON" button, it connects, I can discover the switch. Now here is the problem: When I'm connected...
by mortar8
Wed Jun 10, 2015 9:54 pm
Forum: General
Topic: CRS not propagating PCP field
Replies: 4
Views: 1403

Re: CRS not propagating PCP field

Hello. Tkanks Chechito for Your suggestion. You're right about DSCP being honored by Unifi APs and it being transported with the IP header throuought the network. I've used this approach and confirmed the field is set on packets bound to APs. I have yet to witness it's (the prioritization on wifi) e...
by mortar8
Tue Jun 09, 2015 12:10 am
Forum: General
Topic: CRS not propagating PCP field
Replies: 4
Views: 1403

Re: CRS not propagating PCP field

Hello, thanks for replying. Your solution sounds more like a dirty workaround. Looking at how qos is convoluted in crs, I would like not to do that :) Missing from my first post are : -A plea for help. Please help. -Overview of what I wan to accomplish, so that maybe someone can propose a different ...
by mortar8
Mon Jun 08, 2015 11:57 am
Forum: General
Topic: CRS not propagating PCP field
Replies: 4
Views: 1403

CRS not propagating PCP field

Hello. I'm trying to make a PCP field to propagate through CRS-125-24G without success. PCP is set with bridge rule on CCR, then travels with VLAN to the CRS. I use mirroring to sniff out packets. I can see the PCP field set on packets entering the switch on port 1, then they leave with the field un...
by mortar8
Sat Apr 25, 2015 12:48 am
Forum: General
Topic: IPSec Policy not found when Generate enabled
Replies: 4
Views: 8121

Re: IPSec Policy not found when Generate enabled

Bump here.
Can't get this to work with remote peer set to 0.0.0.0/0. Log says "no configuration found for 0.0.0.0".
And if I instread use the IP that the other router has at this moment - works.
This is frustrating.
by mortar8
Fri Jan 23, 2015 6:51 pm
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144049

Re: Winbox 3 RC

Hello. I would like to say that I'm quite dissapointed with how this works. I used beta 3 for a couple of days and went back to winbox2. Today I had to do something on a router from a different computer and quickly downloaded winbox from the website. So, I've launched w3 and : -tried to connect via ...
by mortar8
Fri Aug 29, 2014 3:17 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 128093

Re: Winbox 3

Hello. My observations : - Winbox3 has a tendency to eat all CPU it can. Right after it is started. Stops when minimized. In fact, CPU consumption is dependant on window size. - Please add an option to disable the leading rows for each new letter. For lists with a few hosts it actually hurts visibi...
by mortar8
Tue Aug 19, 2014 12:41 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 128093

Re: Winbox 3

Hello. My observations : - Winbox3 has a tendency to eat all CPU it can. Right after it is started. Stops when minimized. In fact, CPU consumption is dependant on window size. - Please add an option to disable the leading rows for each new letter. For lists with a few hosts it actually hurts visibil...
by mortar8
Mon Sep 16, 2013 2:28 pm
Forum: Scripting
Topic: Problem with accessing global variables between scripts
Replies: 1
Views: 1861

Problem with accessing global variables between scripts

Hello. I'm puzzled with this because as I have read, global variables should be accessible from any script of a user. Meanwhile I can assign a global variable in script, read it from terminal, but cannot read it from another script. Also, the variable is not listed in system/script/environment, but ...