Community discussions

Search found 359 matches

  • 1
  • 2
by Kreacher
Sun Nov 05, 2017 4:06 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 59928

Re: Ubiquiti vs Mikrotik

I personally e not a winner or a looser the one is offering things the other is not and vice versa. MikroTik is offering devices with more options and able to realize more fine tuning as UBNT is doing and UBNT is offering more or less devices and options such the UBNT wireless controller software th...
by Kreacher
Wed Jul 26, 2017 11:47 pm
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik
Replies: 79
Views: 29164

Re: X86_64 ROS - 64bit Mikrotik

Well, License fees are very small MikroTik's income part compared to RouterBoards sales And there for I was speaking from a total game Play changer! - Linux Kernel and drivers are easily to get hands on and from the vendors side they will often be there - Intel´s QAT Linux driver is ready to use fo...
by Kreacher
Wed Jul 26, 2017 11:45 am
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik
Replies: 79
Views: 29164

Re: X86_64 ROS - 64bit Mikrotik

Hello to all, I was ready this thread very carefully and also "between the lines" and must now please enter that discussion about the x86_64Bit, because there are some things about that must be spoken if you are talking about MikroTik and x86_64Bit. (Only in my opinion) I company rules, from who giv...
by Kreacher
Wed Nov 11, 2015 12:48 pm
Forum: RouterBOARD hardware
Topic: RouterOS x_86 64Bit & better Hardware support
Replies: 6
Views: 2895

Re: RouterOS x_86 64Bit & better Hardware support

for your normal x86 installs 64bit kernel will break things. This is why it is not offered for current standard RouterOS relaese. 6.31 had a bug, where one could select between 32bit or 64bit kernel, however, you are not gaining much if anything and all the userspace is still 32bit. For now you are...
by Kreacher
Wed Nov 11, 2015 7:45 am
Forum: RouterBOARD hardware
Topic: RouterOS x_86 64Bit & better Hardware support
Replies: 6
Views: 2895

Re: RouterOS x_86 64Bit & better Hardware support

@chechito excuse me i dont have experience with x86 on routeros but im interested. MikroTik is offering to his customers a wide range of devices, except router, but if something is not matching your criteria or you want to build a router by your own you can swap to the RouterOS X_86, but more and mo...
by Kreacher
Tue Nov 10, 2015 10:44 pm
Forum: RouterBOARD hardware
Topic: RouterOS x_86 64Bit & better Hardware support
Replies: 6
Views: 2895

RouterOS x_86 64Bit & better Hardware support

Hello all, I would only ask for a x_86 64Bit version of RouterOS or if this would be coming at one day to have a better support of newer hardware available from many vendors, actually. RouterOS: - Real 64Bit RouterOS with no GB RAM limit - Real or better CPU Multicore & HT support - Intel QuickAssis...
by Kreacher
Sun Mar 08, 2015 12:54 am
Forum: The Dude
Topic: The Dude Alternatives
Replies: 26
Views: 27387

Re: The Dude Alternatives

I thought I would like intermapper but I don't, I just found Total network monitor and tclmon. I might try tclmon. http://docs.softinventive.com/En/Total_Network_Monitor http://tclmon.sourceforge.net/screenshots.php Hey Lebowski do you think it will be at some day a comes a new version from the DUDE?
by Kreacher
Sun Mar 08, 2015 12:50 am
Forum: RouterBOARD hardware
Topic: CCR-1072 release date?
Replies: 71
Views: 13826

Re: CCR-1072 release date?

any information for the power consumption? This is in my eyes not so really interesting, caus of the power of this router! If you think you will need a CCR1072 device, you will not have a dedicated look on the power comsumting, as I really see it right, ok gfood to know, but not really urgent to kn...
by Kreacher
Sun Mar 08, 2015 12:14 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

First revision of RB850Gx2 will not have a IPsec encryption accelerator, as initially posted in this thread Normis ... can you please answer these questions: 1. Is there going to be a revision of RB850Gx2 with IPsec encryption accelerator ? 2. When can we expect such a revision? 3. Will future revi...
by Kreacher
Tue Sep 30, 2014 1:54 am
Forum: General
Topic: WISP Setup getting away from Hotspot
Replies: 3
Views: 1172

Re: WISP Setup getting away from Hotspot

only using Mikrotik for Tower Router. Everything else is Ubiquiti :(
Handlink ISS-7000

It is an Internet Subscriber Server that can be used for all devices and will be also
able to serve a mixed network.
by Kreacher
Mon Sep 29, 2014 3:02 am
Forum: General
Topic: Crystalfontz CFA-634 Support?
Replies: 4
Views: 881

Re: Crystalfontz CFA-634 Support?

Hmm, doesn't seem to work for me, and the only drivers I see are for the 633. I get garbled stuff all over, but nothing readable.
Try using the same driver as for the 633 version!
by Kreacher
Mon Sep 29, 2014 2:59 am
Forum: General
Topic: VPLS Bug in X86 Architecture
Replies: 5
Views: 2298

Re: VPLS Bug in X86 Architecture

Hello i am using routeros 6 for x86 architecture and i run vpls tunnel between two routers and my x86 routers reboot when they statring up. thanks. As I see it right the entire x_86 line of RouterOS is not really urgent enough at the moment for MikroTik because of the CCR, CRS and other new devices...
by Kreacher
Mon Sep 29, 2014 2:40 am
Forum: General
Topic: IPSEC: Default policy template [6.18/6.19rc4] - tilera
Replies: 1
Views: 1205

Re: IPSEC: Default policy template [6.18/6.19rc4] - tilera

Please mark this post under the top headline as a bug report!

Submit this post as a bug report to MikroTik Technical Support:
by Kreacher
Mon Sep 29, 2014 2:37 am
Forum: General
Topic: V7 soon ?
Replies: 20
Views: 7740

Re: V7 soon ?

Likes other said: - 802.11ac support - NV2 latency improved and stable jitter - DUAL NSTREME stable with N and AC cards And on top from me, - all problems from v5 and v6 fixed and solved out! all is stable running! - all types of vpn working smooth - RouterOS on CCR is using all cores - RouterOS x8...
by Kreacher
Mon Sep 29, 2014 2:26 am
Forum: General
Topic: MLPPP of 2 connections showing many more?!
Replies: 2
Views: 937

Re: MLPPP of 2 connections showing many more?!

RB750 firmware 6.18 The MLPPP seems to work however we have only 2 symmetric lines, when bonding if you go to the status it shows that the active links 4, 5, 6 any number. What is the reason for this or does anyone else see this behavior? Thanks, There are only two things you can do: - Using two or...
by Kreacher
Mon Sep 29, 2014 1:47 am
Forum: General
Topic: IP telephony
Replies: 6
Views: 2299

Re: IP telephony

Hi! i have installed v6.10 RouterOS on the computer, but there is no ip telephony feature.
Any one to help?
thanks a lot.
There is no integrated TUN server and/or SIP ALG so why you are asking?
Use an Asterisk server in the DMZ and all is running smooth.
by Kreacher
Mon Sep 29, 2014 1:43 am
Forum: General
Topic: [SOLVED] please solve 10Mbps ethernet problem
Replies: 7
Views: 4319

Re: [SOLVED] please solve 10Mbps ethernet problem

We where changing in the past all of our patch cables to CAT.6a, the length does no matter, we changed all of them and the positive effect we where seeing was, that at all used MikroTik devices many of the told above problems where gone from one to the other second. Ok by the way we a re using S/SFT...
by Kreacher
Mon Sep 29, 2014 1:08 am
Forum: Beginner Basics
Topic: How to connect 2 switches
Replies: 22
Views: 9122

Re: How to connect 2 switches

If not, what is the best solution to provide the highest speed possible between these 2 switches ? 2 x direct attached cable for both SFP+ slots and building a LAG (LACP) aggregated you will own then an 20 GBit/s uplink between this switches. Have to ask, do you really need more then 24 ports? Do y...
by Kreacher
Mon Sep 29, 2014 12:27 am
Forum: Beginner Basics
Topic: Hybrid Wired/Wireless network at home - an Idiot's Guide
Replies: 12
Views: 2999

Re: Hybrid Wired/Wireless network at home - an Idiot's Guide

And what is now the question or the problem? I was not seeing only one problem in your case! 1) Are my requirements reasonable or am I going for something impossible? How many clients must be served or should be connected to this network? How many and what kind of traffic is running through this net...
by Kreacher
Mon Sep 29, 2014 12:15 am
Forum: General
Topic: RB2011UiAS-2HnD-IN CPU bottleneck
Replies: 14
Views: 3367

Re: RB2011UiAS-2HnD-IN CPU bottleneck

RB2011UiAS-2HnD-IN CPU bottleneck Hm as I see it right there will be more then one point that is not really matching in this story here, sorry. At first the RB2011UiAS-2HnD-IN is a home router with good capabilities and options but how more a device gets to do, it would be even slowing down the ent...
by Kreacher
Sun Sep 28, 2014 11:24 pm
Forum: General
Topic: WISP Setup getting away from Hotspot
Replies: 3
Views: 1172

Re: WISP Setup getting away from Hotspot

For a long time Ive used Hotspot and a radius server for many of my WISP towers. Is there a way to do that same thing hotspot does without hotspot? I know I can have DHCP use radius and it sets up queues, BUT! if the Routerboard is power cycled all clients would get completely non-throttled connect...
by Kreacher
Sun Sep 28, 2014 11:16 pm
Forum: General
Topic: Crystalfontz CFA-634 Support?
Replies: 4
Views: 881

Re: Crystalfontz CFA-634 Support?

Any chance this model will be supported via USB?
Manual:System/LCD

Crystalfontz (http://www.crystalfontz.com) Intelligent Serial LCD Module 632 (16x2 characters) and 634 (20x4 characters) 8)
by Kreacher
Sun Sep 28, 2014 11:07 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

If RB850Gx2 will not be at least 2-3 times more powerfull than RB2011, don't even release it Because you say it? I must admit, I have to agree with you. I even say, it should have at least 3 times computing power to handle full duplex 1Gbit/s NAT. ??? What you want to tell them now really? If a dev...
by Kreacher
Sat Sep 27, 2014 4:15 pm
Forum: RouterBOARD hardware
Topic: Cloud Router Switch LACP
Replies: 6
Views: 6914

Re: Cloud Router Switch LACP

In normal you can build a LAG in two ways; - Dynamic LAGs by using the LACP and all will be configured automatically on both ends mode is here even active/active in normal this will working like a charm also on my cheap Netgear or Cisco switches and firewalls - Static LAGs by setting up on both ends...
by Kreacher
Sat Sep 27, 2014 3:55 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

We do have plans for more powerful SOHO routers, but not based on this CPU, something else. Please make it with miniPCIe card slot - that users can change card as needed (802.11N or 802.11ac) And if it is able to realize please make it with an miniPCIe slot that can handle a mSATA, WiFi card or a m...
by Kreacher
Wed Sep 24, 2014 6:48 pm
Forum: General
Topic: Feature Request: UPNP Rules/Restrictions
Replies: 4
Views: 1583

Re: Feature Request: UPNP Rules/Restrictions

Hello,

RouterOS is owning a SOCKET Proxy Server and over this one it would be very
easy to use it to handle the uPNP traffic then nothing else must be done over
the NAT and Firewall way.
by Kreacher
Wed Sep 24, 2014 3:36 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

200Mb on my WAN side. about 300 customers connected using pppoe not very complex firewall rules (35 filter rules, 25 nat rules and 15 mangle rules) and 30 simple queues using pcq. This is able to handle by a RB1100AHx2 without problems and by any kind of CCR in my eyes. But my concern is that i wil...
by Kreacher
Mon Sep 08, 2014 5:41 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ SFP Problems
Replies: 48
Views: 37811

Re: CCR1036-8G-2S+ SFP Problems

I am confused by your question No one here seems to be talking about 1GBase-BX optics. As I see it also, it is even better to be compatible to all or the most other things on the market it will be also grow the range of usage and customers. SX - 850 nm, 500 m LX - 1310 nm, 10 km EX - 1310 nm, 40 km...
by Kreacher
Mon Sep 08, 2014 4:39 pm
Forum: RouterBOARD hardware
Topic: Hardware NAT Accelerate
Replies: 4
Views: 2369

Re: Hardware NAT Accelerate

Hello, Correct me if I am wrong, but RouterOS is not yet 100% multicore. It seems the complete transition is planned for v7. Surely it is not 100% multicore compatible, but if such companies like Microsoft, huge gaming companies, and others like Adobe are only using until today only 4 Cores from the...
by Kreacher
Wed Jul 23, 2014 1:53 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

Please let me know how this works out as I have been interested in this option too, but was not able to find any performance or RouterOS compatibility information (not helped by MT deleting topics about it). Yes it is really sad in my eyes, because those small x86 boxes are also very welcome for ma...
by Kreacher
Wed Jul 23, 2014 1:47 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Would like to request mini PCIe/PCIe functionality to be able to connect other devices such as GPUs, usb and sata and for routerOS to be able to run other programs to be able to implement own encryption, hashing, media functionalities, etc. Based on the tilera tile CPU spec it is also capable of mu...
by Kreacher
Wed Jul 23, 2014 1:43 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

Hi everyone, I'm looking for detailed implementation information for the Tilera architecture. I think really it would be better to look at the website from Tilera and not in the forum of MikroTik! And by the way it is not even the same, what a type of hardware is able to do and what MikroTik is act...
by Kreacher
Fri Jul 11, 2014 12:16 pm
Forum: RouterBOARD hardware
Topic: RB751G-2HnD + WN722N(AR9271) doesn't work
Replies: 40
Views: 9114

Re: RB751G-2HnD + WN722N(AR9271) doesn't work

You should be just right, but there are a lot of obvious records in the Web that wn722n used to work on RB like mine. How to mark it as a support call? Edit the first post in this thread and then click the angle under the subject and safe this again. Submit this post as a bug report to MikroTik Tec...
by Kreacher
Thu Jul 10, 2014 11:44 pm
Forum: RouterBOARD hardware
Topic: RB751G-2HnD + WN722N(AR9271) doesn't work
Replies: 40
Views: 9114

Re: RB751G-2HnD + WN722N(AR9271) doesn't work

It's strange that the system detects the usb device, but can not use it as an interface! This can rally be, because MikroTik is only supporting the entire "Atheros chip set" and not the whole device! And in normal as I am right informed, only x_86 devices sorted with RouterOS are able to run them (...
by Kreacher
Thu Jul 10, 2014 2:23 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

Will we see RB850Gx2 this decade? Nice delay, dudes. One week more without news and I will be buying an Ubiquiti EdgeRouter. Next month I will try out the new Alix APU 1C4 together with RouterOS. :D The EdgeRouter series are also not so hot and fast as announced and spoken about as I really see it ...
by Kreacher
Thu Jul 10, 2014 2:20 pm
Forum: General
Topic: CCR1016-12S-1S+ question briding
Replies: 10
Views: 1784

Re: CCR1016-12S-1S+ question briding

Hello Normis, but do you have a switch with 12 SFP ports? It's very usefull for us. Thanks Why they should fiddle out each existing device new!? The entire CRS Series is not long existing on the market and to start with niche serving products would not speed up the entire sales, and if enough peopl...
by Kreacher
Mon Jul 07, 2014 2:54 am
Forum: Wireless Networking
Topic: 802.11ac is now compatible with 6.15, where's the PCI cards?
Replies: 6
Views: 2206

Re: 802.11ac is now compatible with 6.15, where's the PCI ca

I don't know if I like that card. Rather have a larger PCI version, and one that supports more power. 3 chain? Meh... I searched "Atheros 802.11ac mini PCI" and found these, do you think Mikrotik will support? I thought since Atheros. Surely through the ordinary Atheros support in RouterOS I think ...
by Kreacher
Sun Jul 06, 2014 1:33 pm
Forum: Beginner Basics
Topic: mikrotik as gateway/router w/out DHCP or DNS
Replies: 1
Views: 858

Re: mikrotik as gateway/router w/out DHCP or DNS

Hello, I have a client. They have a file server that runs DHCP/DNS. Before their ISP came in and "upgraded" their hardware the network looked similar to this: internet -> Bridged DSL modem -> ddwrt router -> server (DHCP/DNS) -> internal network You can now replace the DD-WRT Router by a MikroTik on...
by Kreacher
Sun Jul 06, 2014 12:38 pm
Forum: General
Topic: RB1100AH2 dropping packets on all WAN interfaces
Replies: 1
Views: 621

Re: RB1100AH2 dropping packets on all WAN interfaces

RB1100AH2 Ver 6.15 running hotspot with 4 WAN interfaces drops packets on all WAN interfaces at the same time. We load balance all 4 WAN interfaces. After reboot it works well for some time and then the ping loss gets worst. Any suggestions welcome. Dave What kind of WAN speed is running over the W...
by Kreacher
Sun Jul 06, 2014 12:31 pm
Forum: General
Topic: License on vdi or vhd
Replies: 2
Views: 1091

Re: License on vdi or vhd

Welcome, will soft id change if I move vdi or vhd file with mikrotik routeros on other pc?
You can only try it out but as I am informed it would not change, but it is more then a license fee question that muist also match.
by Kreacher
Sun Jul 06, 2014 12:27 pm
Forum: Wireless Networking
Topic: 802.11ac is now compatible with 6.15, where's the PCI cards?
Replies: 6
Views: 2206

Re: 802.11ac is now compatible with 6.15, where's the PCI ca

I'm eager to test this out, after I saw 802.11ac listed as compatible with wireless-fp, can anyone post links for mini-PCI cards that I can use with a rb800? Did you remember this forum thread and did you seen this message here made by normis? When will we have 802.11ac Support? I want to test this...
by Kreacher
Sun Jul 06, 2014 5:02 am
Forum: RouterBOARD hardware
Topic: CRS226-24G-2S+ Poor routing performance
Replies: 35
Views: 25761

Re: CRS226-24G-2S+ Poor routing performance

Would be cool to see a MikroTik Switch like this, sorted with a small Firmware like SwitchOS with layer2 and layer3 capacities, features and options like greater or bigger Switches are offering. I totally agree. CRS with an expanded version of SwOS will be much better and a lot easier to configure ...
by Kreacher
Sun Jul 06, 2014 4:46 am
Forum: RouterBOARD hardware
Topic: Routerboard NAT Performance
Replies: 11
Views: 7562

Re: Routerboard NAT Performance

In normal the usage of SPI and NAT will narrow down the entire throughput or in plain words shorten this throughput for 3% till 5% firewall rules at the wan interface and mangle rules at the LAN interface are defining than the WAN - LAN throughput for this router and internet connection as I see it ...
by Kreacher
Sun Jul 06, 2014 4:09 am
Forum: RouterBOARD hardware
Topic: Poor routing performance on CCR
Replies: 3
Views: 1283

Re: Poor routing performance on CCR

Hello, We have 2 CCR's in production right now, running ROS v 6.15, and when we receive DDOS traffic to hosts on our network in the 600k PPS range, we are seeing %50-75 CPU usage. Ok and what is wrong with this now? 600k PPS = 50% and 1 million PPS = 100% CPU usage and there it will be stopping then...
by Kreacher
Sun Jul 06, 2014 2:03 am
Forum: RouterBOARD hardware
Topic: CRS226-24G-2S+ Poor routing performance
Replies: 35
Views: 25761

Re: CRS226-24G-2S+ Poor routing performance

This is mainly a switch. have witching performance, not Routing - But. there is something in Your setop/software make cpu goes to100%. It should not in low speed like this. What does a /tool profile say about cpu usage? I doubt its Routing. (as long as its simple Routing, and not a bounch of Routin...
by Kreacher
Wed Jul 02, 2014 12:48 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ General info & Questions
Replies: 100
Views: 68668

Re: CCR1009-8G-1S-1S+ General info & Questions

Does anybody know if SFP+ port supports also SFP modules (1,25gbps).
I would like to replace actual config (RB1100AHx2 + 2 gigabit media converters) with 1 CCR1009-8G-1S-1S+ and 2 SFP modules.
Perhaps this answer from @janisk will matching best this question.
Topic: CCR1036-8G-2S+ SFP Problems
by Kreacher
Fri Jun 27, 2014 9:23 am
Forum: General
Topic: How to access the configuration of my router, MikroTik?
Replies: 1
Views: 4017

Re: How to access the configuration of my router, MikroTik?

Hi, The ISP told me that only they can be accessed. But I wonder if there is any way I can get into my router settings? If the Mikrotik is given to you by your ISP, a so called WISP, it would be better that only they are able to have access, preventing you from turning on things that could be harmi...
by Kreacher
Fri Jun 27, 2014 9:20 am
Forum: Beginner Basics
Topic: Placing mikrotik 750 between a main router and a main switch
Replies: 1
Views: 634

Re: Placing mikrotik 750 between a main router and a main sw

First Mikrotik ever,having some difficulties connecting it. My network is set up in a way that there is a main router that receives internet,he goes into the main switch and from there network splits to connected computers. There is a PC that server as a server on that LAN connection too. Now,if i ...
by Kreacher
Fri Jun 27, 2014 9:17 am
Forum: RouterBOARD hardware
Topic: Sixpack no more on suppliers?
Replies: 2
Views: 1131

Re: Sixpack no more on suppliers?

I was checking our suppliers respect mikrotik and found that they do not have six-pack. Is there any way to check that the purchased pieces SXT and SXT-AP are from Sixpack? I hope that the dealer does not extract Sixpack and sell content separately. And how MikroTik should be now controlling all di...
by Kreacher
Tue Jun 24, 2014 3:14 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

I got my first 10M/2M line in 2010, but now it's already 100M/40M for the same price. I am quite sure that this would be not the problem for this router or RouterBoard. My ISP is offering 300M/100M this year, and there will be 1G/1G residential service next year. This can be to much for a so small ...
by Kreacher
Sun Jun 22, 2014 7:31 pm
Forum: General
Topic: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.
Replies: 12
Views: 4308

Re: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.

OPS... i notice now...
This was what I was meant.
Removing PoE adapters and connect powering the device(s) via the jack, immediate result in 1Gbit/s fdx.
Wow! Then you don´t have to search for another failing point in my eyes.
by Kreacher
Sun Jun 22, 2014 5:12 pm
Forum: General
Topic: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.
Replies: 12
Views: 4308

Re: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.

30m and link flawless at 1000Gbit Perhaps you are interested to tell us how you made this working? :wink: All cables are Cat6 foil shielded black outdoor cables, never exceeding 30 meters. I really know that this is the right one (cable), but did you ever tried out another one to be sure that not t...
by Kreacher
Sat Jun 21, 2014 11:38 pm
Forum: General
Topic: Marking Unauthenticated traffic in a Hotspot
Replies: 3
Views: 804

Re: Marking Unauthenticated traffic in a Hotspot

Is there any way to distinguish Unauthenticated traffic in a hotspot ?

Abhishek
Can you please come a little bit more closer or clear about what you are talking?
by Kreacher
Sat Jun 21, 2014 11:35 pm
Forum: General
Topic: What CC Router is most closest to the RB1100AH (NOT x2)
Replies: 1
Views: 531

Re: What CC Router is most closest to the RB1100AH (NOT x2)

I have an RB1100AH working as a core router. Will be doubling the traffic on it in the coming month. Its currently running around 150mbps of internet traffic for about 150 devices (all these are wireless APs, so total devices making TCP/UDP connections is more like 1,000) It is very simply setup. T...
by Kreacher
Sat Jun 21, 2014 11:15 pm
Forum: General
Topic: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.
Replies: 12
Views: 4308

Re: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.

Hello steen, To get gigabit working, I guess all TP pairs is needed, but mt poe solution is using one cable pair right? Yes for sure I consider as I am informed for GBit/s speed there will be 8 pairs and over 4 pairs the entire electricity is running. Is it possible at all to get gigabit + mikrotik ...
by Kreacher
Fri Jun 20, 2014 4:01 pm
Forum: General
Topic: bricked 2 rb-2011 after upgrade
Replies: 1
Views: 1043

Re: bricked 2 rb-2011 after upgrade

Hi, I bricked 2 rb 2011 after upgrading to 6.13 and 6.15. After upgrade router became dead. No led lighting after connecting ethernet on 6-10. Reseting bring back the router but only for once after reboot its again bricked. One of them after few reboots starting working. The 2nd one even after down...
by Kreacher
Fri Jun 20, 2014 12:26 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ SFP Problems
Replies: 48
Views: 37811

Re: CCR1036-8G-2S+ SFP Problems

I have two CRS226-24G-2S+RM switches with a 1G LC SFP in port 1. I can confirm that setting the links manually to 1G DOES NOT HELP. I can not make a link work between two switches with Mikrotik 1G single mode (LC) modules. Tried a different brand SFP module as well. Installed V6.15, same thing. Lin...
by Kreacher
Thu Jun 19, 2014 12:40 am
Forum: RouterBOARD hardware
Topic: Wish - RB2011UiAS-2HnD-RM ?
Replies: 25
Views: 9406

Re: Wish - RB2011UiAS-2HnD-RM ?

It better an cheaper to put a 951UI (dual chain wifi) on top of the rack and power it from ether 10 .... I don't get the point of placing wifi inside a rack .... or work with coax cables .... This would also be a solution, but not really matching and fitting it really as hozam and others need it or...
by Kreacher
Wed Jun 18, 2014 2:58 am
Forum: General
Topic: When will we have 802.11ac Support?
Replies: 33
Views: 10013

Re: When will we have 802.11ac Support?

As I was imagine it, I will try the RB953GS-5HnT & the Compex WLE900VX later this year. :D
by Kreacher
Wed Jun 18, 2014 2:40 am
Forum: Wireless Networking
Topic: Mikrotik RB Wireless Throughput + Questions
Replies: 1
Views: 948

Re: Mikrotik RB Wireless Throughput + Questions

Hello, I have used 433 with PCI cards before for clients to connect to and had very good success, again before Cisco. But this is often not owed to single point, but more then for many different points in this game. The board, the miniPCI card and the used antenna. I suggest more to look for a RB433...
by Kreacher
Wed Jun 18, 2014 2:22 am
Forum: RouterBOARD hardware
Topic: Release routerboards with x86 sockets
Replies: 3
Views: 1261

Re: Release routerboards with x86 sockets

Holy crap....
Thank you...
:D
Perhaps to expensive?
Here is a less expensive solution.
Alix APU

Soekris ner6501-70
But this I haven´t tested with RouterOS yet, but it offers 12 Ports in total.
by Kreacher
Wed Jun 18, 2014 2:16 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

the 850Gx2 will have enough cpu power? it has only dual core at 600mhz In my eyes it is a very powerful router, from what the tech specs. are showing. But I am more interested in the way MikroTik was writing code for the both CPU cores to use them! If this is matching well and the both core will be...
by Kreacher
Tue Jun 17, 2014 11:07 pm
Forum: RouterBOARD hardware
Topic: Release routerboards with x86 sockets
Replies: 3
Views: 1261

Re: Release routerboards with x86 sockets

Hello Mikrotik peeps... I was curious if it was possible to have something like an RB1100 be released with say an AM3+ socket or a 1155/1150 socket? Then with RAM slots and a CF port/SATA port. Basically, if it was possible to have Mikrotik release a motherboard with the ports attached to the PCIe ...
by Kreacher
Tue Jun 17, 2014 10:49 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

And this is the part I can´t consider to you, related to the circumstance that a first stable version with only the half activated feature set offered by RouterOS or in other words without all from RouterOS given options and functions, only to tell the whole public, "we have now the first really st...
by Kreacher
Sat Jun 14, 2014 2:37 pm
Forum: General
Topic: Blocking proxy server
Replies: 8
Views: 2226

Re: Blocking proxy server

Hello, would it be able to realize by setting up accounts!? So if one has an user and password account you are able to block or wipe this whole account. But for sure then it not interesting over witch proxy they are coming in. Also registering by setting up an certificate will be able to block them...
by Kreacher
Sat Jun 14, 2014 2:05 pm
Forum: General
Topic: 6.13 and simple queues?
Replies: 6
Views: 1534

Re: 6.13 and simple queues?

hi, sorry for posting on this subjet. i'm looking for savage. I want to know if u have found a solution for your contention problem. I have the same problem, and i'm still looking for a solution. Thx in advance. Under the Link in my first post you will find something like this! Is this helping you ...
by Kreacher
Sat Jun 14, 2014 11:36 am
Forum: General
Topic: Blocking proxy server
Replies: 8
Views: 2226

Re: Blocking proxy server

95% of ppl are small children without any money. I was thinking about "whitelist" where we accept anyone who will apply - but with this amount of players it's time consuming and it will take down numbers of players (not everybody is willing to wait for WL). Only solution, that i was able to devise ...
by Kreacher
Fri Jun 13, 2014 11:12 pm
Forum: Beginner Basics
Topic: NAT and Bridge with one uplink
Replies: 2
Views: 954

Re: NAT and Bridge with one uplink

Hi, A have an RB2011iL with one uplink port. I would like to solve the following scenario: Bridge-local port 1: uplink port 2: server 1 (ESXi server with multiple vps) port 3: server 2 I have three public ips at the moment. One belongs to port 1 one belongs to a VPS inside ESXi and the third one be...
by Kreacher
Fri Jun 13, 2014 10:54 pm
Forum: General
Topic: API Port blocked
Replies: 1
Views: 474

Re: API Port blocked

Hello Sigma721,
I need some help, I have a php site which posts some code to my RB's via the API port.
Yes it is able to do, but only if you are activating the API and set a user and a password for this!
The API is by default not enabled!
by Kreacher
Fri Jun 13, 2014 10:37 pm
Forum: Forwarding Protocols
Topic: I need some consulting expert to deploy a MK Network Routed
Replies: 1
Views: 749

Re: I need some consulting expert to deploy a MK Network Rou

Hi, I need some consulting services to deploy a full Mikrotik network with some of these features
PtMP Full Mikrotik Network
AP to CPE with MPLS IPv4 /IPV6
Core NETWORK FULL BGP 2 Providers
You can hire a so called MikroTik consultant and he is helping you out!
MikroTik international consultants
by Kreacher
Fri Jun 13, 2014 10:33 pm
Forum: Beginner Basics
Topic: UPLOAD Bonding AAISP Routerboard 951
Replies: 1
Views: 654

Re: UPLOAD Bonding AAISP Routerboard 951

I have sucessfully set up the router for download bonding with AAISP, using ports one and two, and the remaining ports for LAN. ( I believe there are a few other AAISP clients on here with Mikrotiks) but have yet to suceed in bonding the upload. I have tried Round Robin / Packet marking /Masquerade...
by Kreacher
Fri Jun 13, 2014 10:25 pm
Forum: General
Topic: Radius / Hotspot / Contentfiltering
Replies: 1
Views: 529

Re: Radius / Hotspot / Contentfiltering

Hello,

would it perhaps be better to set up a squid http proxy & SquidGuard behind the MikroTik router!?
by Kreacher
Fri Jun 13, 2014 10:22 pm
Forum: Beginner Basics
Topic: Block Streaming On CCR1036
Replies: 1
Views: 571

Re: Block Streaming On CCR1036

How I can Block Online Streaming For Users Via MIKROTIK CCR1036
What kind of streaming your wan to block?
Perhaps it would be better to do so with an Squid http proxy behind the MikroTik CCR?
by Kreacher
Fri Jun 13, 2014 10:18 pm
Forum: General
Topic: Assing public IP to internal server
Replies: 1
Views: 401

Re: Assing public IP to internal server

What I'm doing wrong???? :?
You where setting up two posts as a so called double post!
This was wrong, I answered this question here http://forum.mikrotik.com/viewtopic.php ... 39#p431491
by Kreacher
Fri Jun 13, 2014 10:14 pm
Forum: General
Topic: Assing public IP to internal server
Replies: 1
Views: 465

Re: Assing public IP to internal server

I successfully assign a public IP address to an internal server, but when I saw apache logs on the server I only see the router interface IP address accessing the server, everyone is getting the router interface IP address instead of their public ip adresses? What I'm doing wrong?????? :? Hello thi...
by Kreacher
Fri Jun 13, 2014 10:07 pm
Forum: Beginner Basics
Topic: Load BALANCING with 2 wan Help me
Replies: 1
Views: 584

Re: Load BALANCING with 2 wan Help me

Hello, this would be not really able to do, and when only by packet marking but trust my words it is in my opinion better, to go by load balancing. Load balancing methods: service based lb session based lb policy based lb I suggest you to try out the policy load balancing method in your case and the...
by Kreacher
Fri Jun 13, 2014 9:53 pm
Forum: General
Topic: 10G SFP+ Switch Coupling
Replies: 3
Views: 2053

Re: 10G SFP+ Switch Coupling

Hello, Does anybody know if two CRS226 can be coupled over 10G Fiber on SFP+? Yes for sure this can be done. - And if yes: Will at least 10GBIT of the the switch backbone bandwidht be transferable to the second CRS226? Yes for sure but also the other ports a counting to the entire switch throughput!...
by Kreacher
Fri Jun 13, 2014 9:38 pm
Forum: General
Topic: huawei k5150
Replies: 1
Views: 1658

Re: huawei k5150

Hello, will be supported Huawei K5150 LTE modem? On 6.13 not working yet. (no USB port no LTE interface if reboot or not) on linux working good. http://www.abclinuxu.cz/hardware/pripojeni-na-sit/cdma-umts/vodafone-huawei-k5150 thanks Hello jindranix, Linux is open and you are able to install driver...
by Kreacher
Fri Jun 13, 2014 9:36 pm
Forum: Wireless Networking
Topic: Home Wireless Network
Replies: 1
Views: 877

Re: Home Wireless Network

Hello, there are some different metods to start with MikroTik RouterOS and RouterBoards for the home usage, it would be fine to buy two books frist, read them and then you will have more knowledge about the RouterOS system, it will bring you up to do research the wiki and asking more detailed questi...
by Kreacher
Thu Jun 12, 2014 6:39 am
Forum: General
Topic: Verify Server Certificate on SSTP doesn't work
Replies: 1
Views: 881

Re: Verify Server Certificate on SSTP doesn't work

Verify Server Certificate on SSTP doesn't work 6.14 SSTP client to 5.26 SSTP server doesn't work. SSTP client log: handsharke failed (6) SSTP server log: tls shutdown 6.13 client to 5.26 server works. http://forum.mikrotik.com/viewtopic.php?f=2&t=85867 http://forum.mikrotik.com/viewtopic.php?f=2&t=...
by Kreacher
Thu Jun 12, 2014 6:34 am
Forum: General
Topic: Blocking proxy server
Replies: 8
Views: 2226

Re: Blocking proxy server

Hello, i have quite big problem with people coming back on my gaming servers through proxy servers - these ppl are unbannable. Is there any way to block proxy servers (not for HTTP, but game servers such as minecraft, CoD, LFS, ...) without having to add milions IP addresses to blacklist? Would the...
by Kreacher
Wed Jun 11, 2014 2:37 pm
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 38986

Re: The Dude is NOT Dead - New Dude Version...

@chojrack11 Free of charge like now (4.3Beta) Native 64Bit client running on - WHS2011 & SBS2011 - Windows Server 2012 - CentOS, Debian, OpenSUSE, RetHad - MacOS, MacOS Server ......a Native Linux OS like CentOS 32Bit & 64Bit as an appliance ISO image - Lan & WAN management DEMO for home and private...
by Kreacher
Mon Jun 09, 2014 2:10 pm
Forum: General
Topic: How block OS Windows
Replies: 39
Views: 7683

Re: How block OS Windows

If there are just a few machines in the office, allow them by MAC address and drop the rest.
Also MAC addresses could be change or also spoofed in this "fugitive game"
but two different VLANs and some mangle rules matching each VLAN would
be done in minutes for very experienced users like yours.
by Kreacher
Sat Jun 07, 2014 10:52 pm
Forum: Beginner Basics
Topic: Mikrotik hotspot function + usermanager + printer
Replies: 4
Views: 1392

Re: Mikrotik hotspot function + usermanager + printer

Bump :mrgreen: :mrgreen: Hello, for home network environments it would be perhaps running with this small program. readyVoucher And for more business like networks or HotSpots you could also try out this one here, it is a hotspot printer that prints vouchers and also are creating in the MikroTik us...
by Kreacher
Sat Jun 07, 2014 8:09 pm
Forum: Beginner Basics
Topic: Problem with Mikrotik (CCR1016 -12G) and Asterisk (free-pbx)
Replies: 1
Views: 1291

Re: Problem with Mikrotik (CCR1016 -12G) and Asterisk (free-

Hello Diego,
Thank you in advance for any help you can give me about it...
I would suggest to build a DMZ and than you could place the Asterisk appliance
inside, so it can be reached from the internet and from the local area network.
by Kreacher
Sat Jun 07, 2014 5:31 pm
Forum: General
Topic: RB433AH update firmware problem
Replies: 1
Views: 791

Re: RB433AH update firmware problem

Hello,
After installing the Mikrotik OS version 4.17 the 3 routerboards
stayed with the same MAC address and same serial as well as the license ID is the same.
Did you use Netinstall for this procedure?
Link: Netinstall
by Kreacher
Sat Jun 07, 2014 2:41 am
Forum: General
Topic: 6.13 and simple queues?
Replies: 6
Views: 1534

Re: 6.13 and simple queues?

Skimmed through it, mailed support, and busy downgrading to 6.10 6&@$^&@$&*^%*&@#$^&*^#$ Why oh why, can't we just get a release that works! :( To much to do for them I really think! CCR Series, a bunch of new devices, Caps manager and so on and so on....... SwitchOS and TheDUDE are sleeping, but I...
by Kreacher
Sat Jun 07, 2014 2:19 am
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 38986

Re: The Dude is NOT Dead - New Dude Version...

After using dude for so many years I'm moving off to a new system with support and updates....going to cost our customers $2500 AU for each site but I believe its worth it. The one thing is TheDUDE and the other thing is another thing! You will never find a tool like TheDUDE because there is no one...
by Kreacher
Sat Jun 07, 2014 1:46 am
Forum: The Dude
Topic: The Dude Alternatives
Replies: 26
Views: 27387

Re: The Dude Alternatives

Hello, at home I have installed TheDUDE on a Windows Home Server 2011, PRTG and now the SoftEther VPN Server all together it would be reaching for my home network. In business network we are using the PRTG together with the Kentix sensor solution, it is able to send alarms over Email and SMS. But fo...
by Kreacher
Sat Jun 07, 2014 12:40 am
Forum: General
Topic: 6.13 and simple queues?
Replies: 6
Views: 1534

Re: 6.13 and simple queues?

Hi, Is there a issue with simple queues on 6.13? [cknipe@AMS-CN01-CR01] > /queue simple print stats interval=1 Flags: X - disabled, I - invalid, D - dynamic 1 name="test" target=41.79.165.241/32 rate=0bps/0bps total-rate=0bps packet-rate=0/0 total-packet-rate=0 queued-bytes=0/0 total-queued-bytes=0...
by Kreacher
Fri Jun 06, 2014 11:35 pm
Forum: Forwarding Protocols
Topic: Centralized management for L3 VPN (MPLS/VRF) deployment
Replies: 2
Views: 1283

Re: Centralized management for L3 VPN (MPLS/VRF) deployment

Hello otgooneo, thousands of customers with tens of routerboards. This are then many thousands of routers, so I don´t really think it could or better should be done by only one device in my opinion. 2. Dude - I don`t think it`s possible to see queues/ipaddresses from different router on single windo...
by Kreacher
Fri Jun 06, 2014 9:43 pm
Forum: General
Topic: How block OS Windows
Replies: 39
Views: 7683

Re: How block OS Windows

@rextended 1) TCP/UDP port 135 and 445 used by RDP and COM+ Windows Only Services Could be bypassed with a VMWare player and a small linux ISO like perhaps SliTaz. 2) time.windows.com NTP server by default on all version of Windows Can be changed to another NTP server. 3) DHCP client request identif...
by Kreacher
Fri Jun 06, 2014 7:55 pm
Forum: Forwarding Protocols
Topic: HWMPplus UDP broadcast and automatic setup
Replies: 1
Views: 733

Re: HWMPplus UDP broadcast and automatic setup

I have a project where the bandwidth requirements are quite low, but what I need to happen is for broadcast traffic to get successfully to every node. This would be done over Layer2 by using the HMWPplus protocol. What I'm looking for is; Automatic configuration, nodes can be added/removed from the...
by Kreacher
Fri Jun 06, 2014 7:19 pm
Forum: Beginner Basics
Topic: Licence and Upgrade Question
Replies: 9
Views: 1342

Re: Licence and Upgrade Question

Hello phuketmymac, in normal you buy a RouterBoard and it comes with an activated (licensed) RouterOS version on it as I see it right. And in normal, you will be only able to upgrade the RouterOS version to the next one likes from 5 to 6 or from 6 to 7, but often enough I have seen RouterBoards ofte...
by Kreacher
Fri Jun 06, 2014 7:05 pm
Forum: General
Topic: RouterOS SSH and 1024 bit DSA keys
Replies: 2
Views: 1365

Re: RouterOS SSH and 1024 bit DSA keys

Are there any plans to increase key size for DSA keys for SSH? Also, are there any plans to support ECC crypto for SSH? Given the advances in research on the discrete logarithm problem, we really need to start thinking about this. Hell Staj, I consider to increase the size of the DSA SSH keys up to...
by Kreacher
Fri Jun 06, 2014 6:48 pm
Forum: General
Topic: Notifications
Replies: 1
Views: 753

Re: Notifications

I set up a notification, no sweat. However, I can't seem to find how to configure the notification to let me know when the "down" system is back up. Also, I can't seem to find how to notify us via SMS. Thanks for your time. Regards. Lupe Torres Hello Lupe, some words from me to exactly this point o...
by Kreacher
Thu Jun 05, 2014 10:52 pm
Forum: RouterBOARD hardware
Topic: i need help
Replies: 5
Views: 1141

Re: i need help

And how do you expect it should work? we want marge 2 line with full access to any server in our network from any place Hello almoslem2005, Please see at the next line for get more detailed informations! 5 + 5 = 10 but 5 MBit/s + 5 MBit/s = 5 + 5 and not 10 MBit/s ok? There are 2 different way that...
by Kreacher
Thu Jun 05, 2014 5:49 pm
Forum: General
Topic: CCR1016-12S-1S+ question briding
Replies: 10
Views: 1784

Re: CCR1016-12S-1S+ question briding

If you need switch functionality, we have much lower cost device, the CRS series. Switching is wire speed, you don't need powerful Tilera CPU to do this.
Ah ok now all is clear, thank you for the fast replay normis!
by Kreacher
Thu Jun 05, 2014 5:47 pm
Forum: RouterBOARD hardware
Topic: Mikrotik Transceiver with HP switch
Replies: 5
Views: 4360

Re: Mikrotik Transceiver with HP switch

What if I got the S-31DLC20D. What SFP for HP would work with that? I cant really find any that are single mode LC at 1310nm Hello again, in normal terms and conditions you go in this cases backwards as I am doing it right until today also like this: - How many meters or kilometres must be override...
by Kreacher
Thu Jun 05, 2014 5:07 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

(selling only if the router is stable) . If a product is not fit for purpose then it shouldn't be sold. In the case of the CCR it seems its only stable under certain configurations. I believe it would be best to release a cut back version of the firmware that only allows tested and stable configura...
by Kreacher
Thu Jun 05, 2014 3:58 pm
Forum: General
Topic: CCR1016-12S-1S+ question briding
Replies: 10
Views: 1784

Re: CCR1016-12S-1S+ question briding

I´m talking about switch chip menu in winbox. Mayby tile gx architecture support it, but ROS not. You are right with this for sure. that is correct. You have to use bridge for that as CCR1016 does not have switch. Might this bee a point to organize a real or better virtual switch insite of RouterOS...
by Kreacher
Thu Jun 05, 2014 10:01 am
Forum: General
Topic: Mikrotik 5.20 x86 and USB WiFi Dongle
Replies: 3
Views: 1826

Re: Mikrotik 5.20 x86 and USB WiFi Dongle

Hi everyone, I have installed Mikrotik on Virtualbox and I have two interfaces on my computer, LAN and WLAN ( USB Wifi dongle ). I have already internet from LAN but I need to use WLAN ( USB Wifi dongle ) as access point hotspot, how can I do that ? Thank you in advance. As I am right informed Rout...
by Kreacher
Thu Jun 05, 2014 9:58 am
Forum: General
Topic: Customized WAN Load Balancing required
Replies: 1
Views: 505

Re: Customized WAN Load Balancing required

I have RB1100ahx2 with 6 WAN links. eth1-eth2-eth3 = ISP.A eth4-eth5-eth6 = ISP.B eth7 = LAN What I want is that browsing (internet sites) should be routed to ISP.A , and download like mp3 zip exe rar should be routed to ISP.B Is there any possibility? If not possible, then is it possible that (sup...
by Kreacher
Thu Jun 05, 2014 9:47 am
Forum: RouterBOARD hardware
Topic: CCR1036 + S-31DLC20D problems
Replies: 1
Views: 957

Re: CCR1036 + S-31DLC20D problems

Hello Joe, I had a spare cable at the office, that has no markings, so I was unsure if it was correctly rated or not, but I tried it and it worked. This could be running but without any guaranty. I only went from 1.25G -> 1.25G SFP, or 10G -> 10G (between the 2 CCR's i have). This is ok. After a lit...
by Kreacher
Thu Jun 05, 2014 8:21 am
Forum: RouterBOARD hardware
Topic: Mikrotik RB750UP + Sierra SL8082T
Replies: 1
Views: 830

Re: Mikrotik RB750UP + Sierra SL8082T

Hello. We have a 3g modem based on Sierra SL8082 it works fine. But there was trouble - this chip is removed from the production. And the replacement proposed chip Sierra SL8083 (which have price high twice for SL8082) or Sierra SL8082T (with good price, but with realtime OS inside). Of course, we ...
by Kreacher
Thu Jun 05, 2014 8:16 am
Forum: General
Topic: Mikrotik To ASA VPN issue
Replies: 1
Views: 561

Re: Mikrotik To ASA VPN issue

Did you set up on both sides in the vpn sections also the aggressive mode?
Another thing is that mostly VPN connects over IPSec are running very well
in combination with Cisco equipment and what kind of VPN method you are using?

Did you set up on both sides static public IP Adresses?
by Kreacher
Thu Jun 05, 2014 8:12 am
Forum: General
Topic: Bandwidth Control/Simple Queues
Replies: 1
Views: 486

Re: Bandwidth Control/Simple Queues

I have multiple public IP's from my ISP. Ok. I use one in the first mikrotik At the WAN interface I suggest. and the rest on a second mikrotik and devices plugged into it. Why you are doing so? This IP adresses are often given for devices such as servers, what is the need of the puplic IP adresses ...
by Kreacher
Thu Jun 05, 2014 7:44 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

Thanks ddd for a so fast answer back to me! If a product is not fit for purpose then it shouldn't be sold. Ok quick and dirty, but the true, that was exactly what I personally want to know. If a user wants to unlock the full feature set they can do so at their own risk. But this is a nearly unclear ...
by Kreacher
Thu Jun 05, 2014 7:18 am
Forum: General
Topic: How block OS Windows
Replies: 39
Views: 7683

Re: How block OS Windows

pfSense https://www.pfsense.org/about-pfsense/features.html Third bullet point under Firewall heading... pfSense software utilizes p0f, an advanced passive OS/network fingerprinting utility to allow you to filter by the Operating System initiating the connection. Want to allow FreeBSD and Linux mac...
by Kreacher
Thu Jun 05, 2014 1:55 am
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ SFP Problems
Replies: 48
Views: 37811

Re: CCR1036-8G-2S+ SFP Problems

Hi Joe Goldman,

in some cases it would be helping to disable the auto-negotiation on one or both sides.
by Kreacher
Wed Jun 04, 2014 11:24 pm
Forum: General
Topic: CCR1016-12S-1S+ question briding
Replies: 10
Views: 1784

Re: CCR1016-12S-1S+ question briding

Because CCR don´t have switch chip
Hello honzam,

please download this white paper from Tilera white paper architecture and performance TILE-Gx and please go to page 15 there is something told about a Open vSwitch is this a virtual switch in your opinion too? Or what is it? :)
by Kreacher
Wed Jun 04, 2014 11:02 pm
Forum: RouterBOARD hardware
Topic: Mikrotik Transceiver with HP switch
Replies: 5
Views: 4360

Re: Mikrotik Transceiver with HP switch

Hello, Has any experience this and know how to over come it? Use a MikroTik SFP modul on the MikroTik side and a HP SFP modul on the HP side! They only must be matching the same jacks like LC on both ends and the supporting the same standards such as 1000BASE-SX Netgear Switch: 1000BASE-SX on MMF 50...
by Kreacher
Wed Jun 04, 2014 9:34 pm
Forum: General
Topic: How block OS Windows
Replies: 39
Views: 7683

Re: How block OS Windows

I need block all Windows OS in my network (only linux is permited inside office) but dont find any article about this. Is possible in Mikrotik? How i can do this? Thanks for any help! This should be able to do easily with RouterOS. normis, you right. I need remove internet access from windows machi...
by Kreacher
Wed Jun 04, 2014 9:27 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

Hello enc, In my opiniion sorting out major bugs has the highest priority and comes long before adding features. For the other versions of RouterOS, likes x86, MIPSBE and PPC it would be right, I consider to this point really. But along with the Tilera hardware some hardware support is given that is...
by Kreacher
Wed Jun 04, 2014 6:55 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ SFP Problems
Replies: 48
Views: 37811

Re: CCR1036-8G-2S+ SFP Problems

Kreacher, thanks for the karma and thanks for the info about the SD card. I'll try that.
No problem I really think it should be also even the best if anyone find out something
and then he is sharing this with all others! So the world will never stops and turns around. :D
by Kreacher
Wed Jun 04, 2014 6:54 pm
Forum: RouterBOARD hardware
Topic: CCR1036-12G-4S SFP Problem.
Replies: 6
Views: 1972

Re: CCR1036-12G-4S SFP Problem.

I have this router with MikroTik S-3553LC20D This is using LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. Is the other side (Meridian MS8GT4GX4) also supporting this? (T1310nm/R1550nm) Or only plain Sx or Lx standards!? only ALL OF THE 4 SFP LIGHTS ON but fl...
by Kreacher
Wed Jun 04, 2014 5:23 pm
Forum: RouterBOARD hardware
Topic: CCR1036-12G-4S SFP Problem.
Replies: 6
Views: 1972

Re: CCR1036-12G-4S SFP Problem.

Hello, I have this router with MikroTik S-3553LC20D pairs, i put the SFP blue one in the router and in the other site i have the yellow one in a Meridian MS8GT4GX4. When the fiber is connected i see ALL OF THE 4 SFP LIGHTS ON BUT NOT FLASHING and there is ONLY ONE SPF MODULE plugged in the mikrotik...
by Kreacher
Wed Jun 04, 2014 2:54 pm
Forum: Beginner Basics
Topic: MikroTik connected to ISP Provided VPN
Replies: 1
Views: 630

Re: MikroTik connected to ISP Provided VPN

Hello,

on the left site (office 1) is there the device named ADSL 1 and ADSL 2 a pure modem
or a router? If this are routers and not plain modems you are created a router cascade
and Office 1 is behind a twice or double NAT and so you will not be able to reach
Office 1 from Offcie 2.
by Kreacher
Wed Jun 04, 2014 2:48 pm
Forum: The Dude
Topic: Dude on CentOS - ping probe not working
Replies: 5
Views: 2704

Re: Dude on CentOS - ping probe not working

Running dude with wine on CentOS release 6.5 (Final) - Working OK but have one problem, probes like CPU, Disk, Wireless_Probe work OK - not working is ping it reports "local problem" It is plain not working as I am right informed. :( One of my wishes for a long time to own a Linux hardened such as ...
by Kreacher
Wed Jun 04, 2014 2:41 pm
Forum: General
Topic: How block traffic from OS Windows
Replies: 2
Views: 501

Re: How block traffic from OS Windows

Hi, We need block all network traffic when come from windows workstations (only linux is authorized). I search but dont find anything about that. My question is: I can create a rule to deny access if is a windows machine in mikrotik? Thanks! Simple creating VLANs for all different PCs odr Workstati...
by Kreacher
Wed Jun 04, 2014 2:39 pm
Forum: General
Topic: CCR VPLS performance, 10g
Replies: 3
Views: 1724

Re: CCR VPLS performance, 10g

Hello, What kind of single connection TCP performance can one expect between 2 CCR1036s over 10gig VPLS? I really think that the MikroTik CCR series is really fast and powerful device, but for a 10 GBit/s WAN line I would suggest you more the CCR1072 Core variant, that is matching more this filed an...
by Kreacher
Wed Jun 04, 2014 11:12 am
Forum: RouterBOARD hardware
Topic: How to block all website but one on RB951G
Replies: 3
Views: 1051

Re: How to block all website but one on RB951G

Hi ! I'm new to that product. i was able to make internet working easily, but i would like to be able to setup a hotspot (username and password) and only allow one site. Could it be possible to get a step by step setup ?? Thank you for your help !!! Hello, Yes of cause there is a step-by-step HOWTO...
by Kreacher
Wed Jun 04, 2014 10:58 am
Forum: RouterBOARD hardware
Topic: RB751G-2HnD + WN722N(AR9271) doesn't work
Replies: 40
Views: 9114

Re: RB751G-2HnD + WN722N(AR9271) doesn't work

Hello. I use RB751G-2HnD (6.13) I plug USB WiFi WN722N(chipset AR9271) Make restart. It appears in reosurces->USB as 1:2 ATHEROS USB2.0 WLAN 12345 480Mbps. But there is no interface in wlan interfaces (Just standart wlan0 for builtin wlan). Please help me. Thanks a lot! Hello, as I am right informe...
by Kreacher
Wed Jun 04, 2014 4:18 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47305

Re: RB850Gx2 - Release date?

Will the 850Gx2 have metarouter support or will it be similar to the RB1100AHx2, with no support?
Any new on this?
Or any new release date?
by Kreacher
Wed Jun 04, 2014 4:11 am
Forum: RouterBOARD hardware
Topic: RB1100AHx2 or CCR1009-8G-1S-1S+
Replies: 19
Views: 12067

Re: RB1100AHx2 or CCR1009-8G-1S-1S+

This comes as a big surprise to me .. Likes me too but not in the expected way! :( And if you will have a look into a white paper from Tilera according to the TileGx platform you will think it must be a dream what this hardware is able to do. Tilera TileGx White Paper Is this a bug or design fail? ...
by Kreacher
Wed Jun 04, 2014 2:28 am
Forum: RouterBOARD hardware
Topic: Home Hardware Config
Replies: 5
Views: 1737

Re: Home Hardware Config

Hello Zorgas, here is a network scheme from the new house of my brother. We were putting inside the walls CAT.7 cables and connect them to dual port networks wall plugs CAT.6a and all comes together in a small room in the basement connected to a 24 Port CAT.6a Patchpanel and from there to the both s...
by Kreacher
Tue Jun 03, 2014 8:04 pm
Forum: RouterBOARD hardware
Topic: x86 issues is my hardware compatible??
Replies: 7
Views: 2475

Re: x86 issues is my hardware compatible??

l1 mtu is set to 1500 If you can do so I would suggest this to insert on all machines l2 mtu is set to 9014 and cant be changed. This is called "jumbo frames" and it must be configured or plain supported by all devices in the game such as: - PC - Switch - Server Than it makes sense and is very usef...
by Kreacher
Tue Jun 03, 2014 7:54 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

in our case, UNTIL NOW, 6.13 seems stable, when used as BGP router; uptime 9 days
Thank you for sharing this information with us!
by Kreacher
Tue Jun 03, 2014 4:15 pm
Forum: RouterBOARD hardware
Topic: x86 issues is my hardware compatible??
Replies: 7
Views: 2475

Re: x86 issues is my hardware compatible??

Hallo thanks for the reply No problem ..i have tried doing the install from scratch This is also what I would consider to you. and doing it with config files from the 2011 . From RB2011 to another RB2011 it can march but not to another platform. both of them make same problems. Ok perhaps this woul...
by Kreacher
Tue Jun 03, 2014 2:48 pm
Forum: RouterBOARD hardware
Topic: x86 issues is my hardware compatible??
Replies: 7
Views: 2475

Re: x86 issues is my hardware compatible??

Hello skoenman, Hallo Guys i imported one of those 6 port x86 servers from china with the idea to have it do all the number crunching. Can please coming more clear to the point or what exactly for a x86 machine you are using? Things such as the Producer, Brand, model, model number would be fine! Dat...
by Kreacher
Tue Jun 03, 2014 12:25 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

@ddd Our redundant concentrator running 4.17 on a RB1000 has been working perfectly for years. It is even the same deal with this in my eyes! If they (MikroTik) is not inserting many new features the half of the crowd is crying loud, and if all this fine things find their way in RouterOS and there ...
by Kreacher
Mon Jun 02, 2014 2:15 am
Forum: Beginner Basics
Topic: L2TP over IPSEC with certs
Replies: 1
Views: 4248

Re: L2TP over IPSEC with certs

Hello,

I am trying to configure L2TP over IPSEC VPN for Windows roadwarriors with certificate authentication.
For road warriors I will suggest you to take plain IPSec without L2TP
by Kreacher
Mon Jun 02, 2014 2:13 am
Forum: General
Topic: PCC Bonding Help Needed
Replies: 1
Views: 533

Re: PCC Bonding Help Needed

Hello , i just want to know if im doing something wrong , You are making a thinking false and this is all! i have used the PCC method to bond my 5x dsl lines. You can not really "bond" the ADSL lines and merge them to one fat pipe! This is only able to do; - inside the local area network (LAN) with...
by Kreacher
Sun Jun 01, 2014 3:39 pm
Forum: RouterBOARD hardware
Topic: Mikrotik POE - big problem, why you dont make similar like U
Replies: 7
Views: 2025

Re: Mikrotik POE - big problem, why you dont make similar li

I like all ways of PoE adapters/injectors, but none of them is universal, so it's better if you have spare ones. PoE shipped with sxt devices is tiny one and doesn't make mess at customers desk. For tower equipment box where is more MT devices it's better to use RouterBoard 260GSP or RouterBoard 75...
by Kreacher
Sun Jun 01, 2014 3:30 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ General info & Questions
Replies: 100
Views: 68668

Re: CCR1009-8G-1S-1S+ General info & Questions

Hello Quindor, the same like the thread about the RB2011 well done and very informative for me, it would be more interesting for my self to know what different kinds of VPN methods would be natively supported by the hardware especial by the MiCA encryption engine. And with DPI tasks is this device s...
by Kreacher
Sun Jun 01, 2014 12:06 pm
Forum: General
Topic: Brute force WPA2 key?
Replies: 3
Views: 2381

Re: Brute force WPA2 key?

Hello, this could be happen; - when other peoples own a Smartphone that is even trying to connect to your WLAN - Other peoples inside your neighbourhood a trying to "play" with your WLAN - Other are having setted up the same SSID likes you - Other are trying really to hack inside of your network The...
by Kreacher
Sun Jun 01, 2014 11:54 am
Forum: General
Topic: Mikrotik and Squid(Ubuntu based)
Replies: 1
Views: 903

Re: Mikrotik and Squid(Ubuntu based)

Helo, it would be the best that you are creating two DMZ zones and in the first you will be able to set up your media device, and in the other one you are able to set up the squid proxy server. Or the second method is also able to do, please set up one DMZ zone only and then inside you should settin...
by Kreacher
Sun Jun 01, 2014 11:11 am
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27546

Re: New Wireless package

Hello together, the MikroTik RouterOS internally "Btest" is a great tool that comes with the entire RouterOS, and as I see it right, it is related to the circumstance that a router often is placed in a network at a core place or at a place where routing is needed. but even it is an angle network poi...
by Kreacher
Sun Jun 01, 2014 2:15 am
Forum: RouterBOARD hardware
Topic: CPU to 100% in some cores ! CCR1036-12G-4S
Replies: 6
Views: 3774

Re: CPU to 100% in some cores ! CCR1036-12G-4S

Hello ppwicho, perhaps we should talking about some tales and curious reports made by some users here inside the forum Many "Core" CPU: You see it from the false side! It is not like a normal Intel CPU with real CPU cores and the same number once again with HT Technology! So you will see CPU count o...
by Kreacher
Sat May 31, 2014 8:07 pm
Forum: RouterBOARD hardware
Topic: Request: Dual Band WiFi in Consumer Routers
Replies: 23
Views: 7199

Re: Request: Dual Band WiFi in Consumer Routers

+1. An RB951Gi-52HacD is way overdue, IMO. :)

-- Nathan
"ac" is the dead of ISM band.
This might be true, but you are free to insert another WiFi card
at this RB or two likes you want.
by Kreacher
Sat May 31, 2014 8:05 pm
Forum: RouterBOARD hardware
Topic: Request: Dual Band WiFi in Consumer Routers
Replies: 23
Views: 7199

Re: Request: Dual Band WiFi in Consumer Routers

Hallo Hammy, Seems a bit excessive for a standard home router But we must not take and use a USB stick modem that is not proper working or only working for hours. And a second WLAN card can be inserted for any WLAN standard and chip set that is supported in RouterOS. RB2011 most peoples where talkin...
by Kreacher
Sat May 31, 2014 2:23 pm
Forum: RouterBOARD hardware
Topic: CRS fiber?
Replies: 9
Views: 2662

Re: CRS fiber?

A Switch with a Tilera TileGx100 Core as the core device and then modules to insert in Module bays, so each of us is able to set up and inserting what he want and what he needs, and each module should be owning a separate TileGx36 (SFP & GB) or TileGx72 (SFP+ & GbE) CPU for driving the entire modul....
by Kreacher
Sat May 31, 2014 1:49 pm
Forum: RouterBOARD hardware
Topic: Request: Dual Band WiFi in Consumer Routers
Replies: 23
Views: 7199

Re: Request: Dual Band WiFi in Consumer Routers

Why aren't we seeing dual band 2.4 and 5 Ghz in the consumer-grade devices? The big box stores are full of them and the RouterBoards best them on every measure except dual-band. I really think the MikroTik RB953 could be a such device, or am I wrong? MikroTik RouterBOARD RB953GS-5HnT OS L5 / 2x min...
by Kreacher
Sat May 31, 2014 1:37 pm
Forum: RouterBOARD hardware
Topic: Packet loss between RB 433 ethernet ports
Replies: 3
Views: 1300

Re: Packet loss between RB 433 ethernet ports

I have two computers connected to the two rightmost ethernet connectors of the RB433 (as pictured on http://routerboard.com/RB433), and they show 100MBit/s connection status. This is then a Layer3 (routing) connection. Computer A is sending about 1800 UDP broadcast packets per second, each with a s...
by Kreacher
Fri May 30, 2014 9:59 pm
Forum: General
Topic: How enable receive sms
Replies: 1
Views: 1273

Re: How enable receive sms

Hello, this is a MikroTik RouterBoard or also called router. And in normal cases, terms and conditions it is very useful; - to call your Router and change the configuration - to send an alarm to the admin (you) if something goes wrong inside of your network Perhaps a script or two should solve your ...
by Kreacher
Fri May 30, 2014 9:52 pm
Forum: General
Topic: Bonding problem
Replies: 1
Views: 1405

Re: Bonding problem

Hello, I'm having some problems with bonding i know that pppoe client can not bonding so i use vlan with two router and redirect What you try out exactly please would you come closer to tell us what you really want to do and set up? Do you mean perhaps you want to bond the WAN ports of both RouterBo...
by Kreacher
Fri May 30, 2014 9:38 pm
Forum: General
Topic: help me out here please one mikrotik 2 dsl's
Replies: 1
Views: 513

Re: help me out here please one mikrotik 2 dsl's

There are many different load balancing methods on the market likes; - Session based load balancing - Service based load balancing - policy based load balancing And even all matches and hits the needs of different situations and circumstances, so in your case it would be, only in my opinion, making ...
by Kreacher
Fri May 30, 2014 9:31 pm
Forum: General
Topic: L2TP/IPsec dropped after site-to-site IPsec configured
Replies: 2
Views: 755

Re: L2TP/IPsec dropped after site-to-site IPsec configured

Hello,

do you using SPI&NAT on both routers?
by Kreacher
Fri May 30, 2014 9:28 pm
Forum: Beginner Basics
Topic: Mikrotik management across a VPN tunnel
Replies: 2
Views: 945

Re: Mikrotik management across a VPN tunnel

What do I need to change on the Mikrotik to allow remote administration? What I would suggesting you is the following. - Try the Webfig - Or try to connect to the RouterBoard via SSH client like Kitty or Putty So you will be ensure that no one is able to look into the connection from both endpoints...
by Kreacher
Fri May 30, 2014 9:25 pm
Forum: The User Manager
Topic: Mikrotik user-manager voucher printing
Replies: 21
Views: 25286

Re: Mikrotik user-manager voucher printing

Thank you alferrar for this :D
by Kreacher
Fri May 30, 2014 9:08 pm
Forum: The User Manager
Topic: Mikrotik hotspot printers compatibility
Replies: 3
Views: 3866

Re: Mikrotik hotspot printers compatibility

Hello,

perhaps it will be running with this equipment.
HotSpot Printer for RouterOS
Account generator

3 buttons
compatible with RouterOS
and the price must be found out by your self please
only cheap looking makes going you mostly twice buying a device :wink:
by Kreacher
Fri May 30, 2014 9:00 pm
Forum: General
Topic: 802.1x authentication in mikrotik using radius server
Replies: 1
Views: 1367

Re: 802.1x authentication in mikrotik using radius server

Hello, So is it possible? I really don´t think so, because your PC and your application is not a real Server and is also not serving services and protocols at the right ports. 1. - Set up a real FreeRadius Server and then create a RootCA there - Set up the MikroTik RouterBoard using the FreeRadius f...
by Kreacher
Fri May 30, 2014 8:53 pm
Forum: General
Topic: Mikrotik + Freeradius Session time left for simultaneous-use
Replies: 3
Views: 1013

Re: Mikrotik + Freeradius Session time left for simultaneous

Hello,

did you set up the same time on both devices (MikroTik RouterBoard and FreeRadius)
Perhaps a network integrated NTP would help you out!

As I see it right the MikroTik does the lease time given DHCP part
and the FreeRadius is setting up the certificate lease time is this right?
by Kreacher
Fri May 30, 2014 8:49 pm
Forum: General
Topic: Hotspot + AD + Usermanager
Replies: 1
Views: 1350

Re: Hotspot + AD + Usermanager

Hello letabawireless, as I am right informed you should do the following: - Create an user account in the MS Server active directory - Create a user account in the MikroTik "usermanager" - And the the user is able to boot his laptop or Notebook - He have to choose the method "Domain" login - The MS ...
by Kreacher
Fri May 30, 2014 8:28 pm
Forum: General
Topic: CPU load v6 much higher than v5 same router same traffic
Replies: 2
Views: 597

Re: CPU load v6 much higher than v5 same router same traffic

Hello, I will try to keep a long story short. And here is the short answer, MikroTik adds to RouterOS continuously new functions, options and/or features mostly based on the willing of their clients and customers and so the entire system will be growing up more and more and is also using mostly more...
by Kreacher
Fri May 30, 2014 8:03 pm
Forum: The User Manager
Topic: ap bridge mode , can SSID still broadcasting ?
Replies: 4
Views: 1814

Re: ap bridge mode , can SSID still broadcasting ?

Set up more than one vap and name them something like as "guest" and "privat"
would this helps you out.
by Kreacher
Fri May 30, 2014 7:59 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ and UPS over serial
Replies: 6
Views: 2179

Re: CCR1009-8G-1S-1S+ and UPS over serial

Hi Rowan, I am using the UPS package in RouterOS to monitor UPS status, via serial only. As I am right informed there are two different protocols from APC to use their USP devices, was both protocols completely translated and found their way in the APC packages from MikroTik? Likes the former new RB...
by Kreacher
Mon May 26, 2014 7:11 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

There will be no miniPCIe on the actual product. Hm, why not, a modem slot to get alarms as sms would be also a fine option. Or plain add a mSATA for user DB or syslog storage, or am I so wrong with this? Tilera chips already used in some IPS boxes(you may see some Singapore and American companies ...
by Kreacher
Mon May 26, 2014 6:57 pm
Forum: RouterBOARD hardware
Topic: Making LCD useful.
Replies: 19
Views: 5253

Re: Making LCD useful.

A custom text field, that could be generated by a script - would be perfect I consider to this and on top something like - MRTG Graphing tool that is showing network throughput (24h, week, month or hour, day, week) - network graphs for WAN / DMZ / LAN or what ever - error messages - active users - ...
by Kreacher
Mon May 26, 2014 6:17 pm
Forum: The User Manager
Topic: session data only saved over 24 hours
Replies: 1
Views: 1116

Re: session data only saved over 24 hours

Did you solve this out now?
If not you are able to edit your
post and then mark it as a bug report and you will
receive technical assistance from an MikroTik employee.
by Kreacher
Mon May 26, 2014 6:00 pm
Forum: The User Manager
Topic: Using mikrotik as a radius server
Replies: 1
Views: 1633

Re: Using mikrotik as a radius server

Hello,
Can i set it up as a radius that will give different levels of access to my routers eg. read only, read/write etc
This would be running, but from how many devices we are talking now about?
by Kreacher
Mon May 26, 2014 5:58 pm
Forum: The User Manager
Topic: custom radius attribute and Mikrotik-Group
Replies: 1
Views: 1605

Re: custom radius attribute and Mikrotik-Group

Hi Allen,

did you solve it out?
by Kreacher
Mon May 26, 2014 5:57 pm
Forum: The User Manager
Topic: RADIUS + DHCP SERVER
Replies: 4
Views: 2401

Re: RADIUS + DHCP SERVER

Hello,

> So nobody knows? Is it should be work or not with Level 4 ?
What RouterBoards are you are using?
And for how many peoples should this setup work?
by Kreacher
Mon May 26, 2014 5:56 pm
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 60266

Re: Which Billing System Is The Best ???

Which Billing System Is The Best ??? Not so easy to answer as you asked for, I think. - The MikroTik RouterOS Usermanager is inside and working well but sometimes a network reaches a point based on fast growing up that perhaps another solution is really helpful. - FreeRadius standalone Server would...
by Kreacher
Mon May 26, 2014 5:44 pm
Forum: The User Manager
Topic: ap bridge mode , can SSID still broadcasting ?
Replies: 4
Views: 1814

Re: ap bridge mode , can SSID still broadcasting ?

I would like to set up the following;
set up a WLAN AP and then create a VLAN and put the AP insite
of the VLAN, thats it.
by Kreacher
Mon May 26, 2014 5:43 pm
Forum: The User Manager
Topic: Alternative payment method ??? Paysafecard ???
Replies: 2
Views: 2039

Re: Alternative payment method ??? Paysafecard ???

Hello, It seems that users find the Paypal method very complicated... And you think now other methods are less complicated for them? Ok perhaps. But the whole User Manager system is not an open one and I'm trying to find a solution... MikroTik RouterOS is offering to his clients & customers a very s...
by Kreacher
Tue Mar 25, 2014 1:45 am
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 59928

Re: Ubiquiti vs Mikrotik

Hello everyone, because the Ubiquiti config interface is more user friendly ? This is owed to the circumstance that MikroTik was starting assemble their devices mostly more for professional usage and not for the entire end user or plain end usage. And only step by step they are acting to the newer f...
by Kreacher
Tue Mar 25, 2014 1:05 am
Forum: Wireless Networking
Topic: HotSpot printer with user manager support
Replies: 1
Views: 848

HotSpot printer with user manager support

Hello everyone,

the company Handlink was setting up a HotSpot printer Handlink WG-500P M
that is supporting RouterOS since v. 5.xx and 6.xx

Perhaps something for you?
by Kreacher
Fri Mar 21, 2014 2:18 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 Network interface details
Replies: 36
Views: 19553

Re: RB850Gx2 Network interface details

What puzzles me is the RAM size. Ok in related to the circumstance and with a viewing eye to the metarouter support it would be truth, but DHCP and DNS entries must also be stored and with IPv6 this will be much more then in former times and with an outlook to new features, upcoming options or the ...
by Kreacher
Fri Mar 21, 2014 1:56 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

CCR1072 inside :o
Thanks for sharing the picture!
by Kreacher
Mon Mar 17, 2014 11:34 pm
Forum: General
Topic: Routing Engine Multicore for BGP
Replies: 11
Views: 3605

Re: Routing Engine Multicore for BGP

I did not raise the ticket, as this is expected for single threaded program. that why everyone asking for the multicore optimization on BGP routing protocol. This could perhaps be on one site, but on the other side I am really thinking, if the entire RouterOS system is running on a many core cpu li...
by Kreacher
Mon Mar 17, 2014 11:01 pm
Forum: General
Topic: When will we have 802.11ac Support?
Replies: 33
Views: 10013

Re: When will we have 802.11ac Support?

Thats a part of a wisp. As the customers grow. You have to upgrade the equipment. I climb 3-5 towers a day non stop. We grow 15-20 new customers a week. So as soon as I put it up. Its outdated. Thats why I am using airfiber. I just keep making shorter links. Which means more bandwidth. Hi dallas di...
by Kreacher
Mon Mar 17, 2014 10:52 pm
Forum: General
Topic: Mikrotik / Bluetooth !!!
Replies: 24
Views: 8433

Re: Mikrotik / Bluetooth !!!

I was hoping to have this feature to print hotspot vouchers directly to a BT Printer (Thermal)
Ok and why you should not take a HotSpot voucher printer with BT functionality
and connect connect this device to the router?
by Kreacher
Mon Mar 17, 2014 10:48 pm
Forum: General
Topic: multi WAN NAT for different LANs
Replies: 5
Views: 1839

Re: multi WAN NAT for different LANs

You don't have to complicate things, just mark routing will do the job for you. Here's the link: http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways I consider to nerdtron that in this case "Policy based Routing" in combination with VLANs would do the job perfectly, in my eyes. PBR ...
by Kreacher
Thu Mar 13, 2014 9:53 pm
Forum: RouterBOARD hardware
Topic: Wish - RB2011UiAS-2HnD-RM ?
Replies: 25
Views: 9406

Re: Wish - RB2011UiAS-2HnD-RM ?

All rackmounted units cost $10 less than the modell with wireless, I would be happy to pay extra for a wireless option in the following products. CRS125-24G-1S-RM RB2011UiAS-RM CRS226-24G-2S+RM If each new RouterBoard will be sorted with an ordinary miniPCIe slot with support for mSATA, Modem and W...
by Kreacher
Tue Mar 11, 2014 8:59 pm
Forum: RouterBOARD hardware
Topic: Wish - RB2011UiAS-2HnD-RM ?
Replies: 25
Views: 9406

Re: Wish - RB2011UiAS-2HnD-RM ?

If not, please start selling separate rackmount case Thanks! At todays times I was really long time not hearing anything about those wishes, but before a long time many peoples, like @honzam where asking for those cases, but I really know only one company who was producing one case such as @honzam ...
by Kreacher
Tue Mar 11, 2014 1:52 pm
Forum: RouterBOARD hardware
Topic: CCR 1009
Replies: 102
Views: 24293

Re: CCR 1009

Update.. I was wrong.. See comment from normis below.
Me too! :lol:
by Kreacher
Tue Mar 11, 2014 1:47 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 Network interface details
Replies: 36
Views: 19553

Re: RB850Gx2 Network interface details

Price $129 HW acceleration Thoughts on Throughput?... I think after launching the test results want also be shown on the http://www.routerboard.com website like all the other RBs. Rackmount options? It is a replacement for the RB450G, what rack mount options we have had for the RB450G? But ok there...
by Kreacher
Mon Mar 10, 2014 8:04 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 Network interface details
Replies: 36
Views: 19553

Re: RB850Gx2 Network interface details

Block diagram please.
The RB850Gx2 will be on sale at late april 2014 as announced in the
newsletter no. 55, and then, if the RB850Gx2 is launched the manual,
the block diagram, etc. will be also shown at www.routerboard.com.

I think they would not show something else as some tech specs. first.
by Kreacher
Sat Mar 08, 2014 1:54 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

Does anybody use CCR for NAT? I need about 1G of NAT. And the CCR1036 is not able to delivery you that throughput? Ok for SPI & NAT you should shorten the entire throughput for something around 3% - 5% in normal cases. But perhaps, if the entire 1 GBit/s is urgently needed, you will be able to wait...
by Kreacher
Mon Mar 03, 2014 3:59 pm
Forum: RouterBOARD hardware
Topic: suggest hardware
Replies: 4
Views: 1032

Re: suggest hardware

Hello again logg, a RB2011 will be able to cover all your wishes and fit your needs. But the "Web proxy cache" you could also forget I think, it slows down the entire RB and would not bring much effort in my eyes. Or where you think would be the YouTube stuff stored for caching? And with three PoE i...
by Kreacher
Mon Mar 03, 2014 9:58 am
Forum: RouterBOARD hardware
Topic: Gigabit NAT, home-use, router recommendation
Replies: 21
Views: 16702

Re: Gigabit NAT, home-use, router recommendation

Hello again dexter001, No problem, can barely wait for it ! You have more then one choice like I am seeing it right! RB450G will be narrow down in price because the replacement will be available then, but on this Router you will be able to install natively also OpenWRT!!! Also likes the RB435G or RB...
by Kreacher
Sun Mar 02, 2014 8:07 pm
Forum: RouterBOARD hardware
Topic: suggest hardware
Replies: 4
Views: 1032

Re: suggest hardware

Hello logg, I manage a small network of about 20 users, I would like a suggestion on what to buy hardware to perform the following functions To give here a detailed or serious tip or suggestion you should give us some more details, please. What the 20 users are doing? What is the bandwidth of the en...
by Kreacher
Sun Mar 02, 2014 5:31 pm
Forum: RouterBOARD hardware
Topic: Gigabit NAT, home-use, router recommendation
Replies: 21
Views: 16702

Re: Gigabit NAT, home-use, router recommendation

Hello dexter001, If I could get something ~ < 150$ that would be as small as the rb750 with just 2 ports one wan, one lan ( 1:1 nat ) .. that'd be great ! The RB850Gx2 is announced for $ 129,00 and comes with the same form factor as the RB450G and it fits also in the same case for something around $...
by Kreacher
Sun Mar 02, 2014 11:36 am
Forum: General
Topic: MLPPP Server
Replies: 4
Views: 1539

Re: MLPPP Server

Hello, considering that mikrotik does not support MLPP Server, I was wondering which router is supporting MLPP MikroTik RouterBoards and RouterOS does support MLPPP. I guess CISCO does, but as you know CISCO is slow and expensive, so I was wondering if Linux or some Linux based router does support C...
by Kreacher
Sat Mar 01, 2014 3:14 pm
Forum: RouterBOARD hardware
Topic: 20 000 hotspot users
Replies: 3
Views: 1668

Re: 20 000 hotspot users

Hi all We are supplying wifi to 20 000 people, who are going to be authenticated through a Mikrotik hotspot and external Radius Server. I am looking at some of the larger RB's and wondering which one is best for this type of traffic? Perhaps a RouterBoard 1100AHx2? Regards From what I was reading h...
by Kreacher
Fri Feb 28, 2014 10:21 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

@wirelessrudy
It was a joke rudy, what interests me wife if new routers comes out!
And by the way I want see the grounding of your RB1000 life! :wink:
by Kreacher
Fri Feb 28, 2014 9:51 am
Forum: RouterBOARD hardware
Topic: Usage of miniPCI-E - ethernet
Replies: 9
Views: 2335

Re: Usage of miniPCI-E - ethernet

Normis: How it is possible that miniPCI-E-ethernet on X86 works and on rb912 it does not work? Perhaps related to the different hardware architectures? I mean when a driver is working on x86 machines it could be translated to MIPSBE and/or PPC hardware architectures but there is no guaranty that th...
by Kreacher
Fri Feb 28, 2014 9:47 am
Forum: RouterBOARD hardware
Topic: rb600 capacitors
Replies: 1
Views: 716

Re: rb600 capacitors

Hello ktsaou, On ether1 however it does not. Is there anything more I should check before throughing this RB600 away? Perhaps the entire lan port was burned and/or damaged. Can this be? What caps did you taken as a replacement? Solid caps? Are they soldered correct in the RB600 or did you mismatch t...
by Kreacher
Fri Feb 28, 2014 8:44 am
Forum: RouterBOARD hardware
Topic: is CCR1016-12G able to handle this?
Replies: 6
Views: 3614

Re: is CCR1016-12G able to handle this?

Hello nelson6069, the environment is hostel. so i have max 400 concurrent users. Are they all at the same time online I suggest you also to take a bigger one or you have the time to wait until all cores are smooth working on ROS it would be the router for you I think, but the CCR1036 would be a bett...
by Kreacher
Fri Feb 28, 2014 8:13 am
Forum: General
Topic: virus signature database settings idea
Replies: 8
Views: 2482

Re: virus signature database settings idea

@astern Ugh, the return of "dobby" If you don´t like me, please also don´t troll me! If you cannot add to the conversation, please don't waste any space adding useless unrelated pablum. Why, because you say it? And FYI, Lanner makes a packet processing engine card for ids/ips, dpi, But this was not ...
by Kreacher
Fri Feb 28, 2014 3:08 am
Forum: General
Topic: virus signature database settings idea
Replies: 8
Views: 2482

Re: virus signature database settings idea

Is there a way to adjust the router database of viruses? that, then, is trying to stick to viruses There is no "router database of viruses". There is no anti-virus software on the router. If you want to detect viruses, you should install an anti-virus program on your computer. Could still be. Inval...
by Kreacher
Fri Feb 28, 2014 2:56 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

And - AFAIK - RouterOS utilizes the engine since v6.8 (don't know if full or only in parts), it is mentioned somewhere in the changelog. Surely they do, but we are talking here about two different parts of the entire SoC. One is the many Core CPU and one is the encryption engine. Ok, if there are o...
by Kreacher
Fri Feb 28, 2014 12:17 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

I think there's a big market for a 951g like router with dual band wifi and hardware acceleration.
Would a RB953GS-5HnT not better match for this field and customers?
by Kreacher
Thu Feb 27, 2014 9:26 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-2HnD-IN Throughput Slow????
Replies: 4
Views: 5847

Re: CRS125-24G-1S-2HnD-IN Throughput Slow????

I think LACP isn't fully implemented on those. You are right but in normal cases terms and conditions it would speed up mostly as I was finding out, only the following case: "If many users or devices are calling or trying to connect one Server or one other device" So it is in my eyes not so very ea...
by Kreacher
Thu Feb 27, 2014 7:42 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD 951Ui 2HnD Capacitor Value
Replies: 1
Views: 1122

Re: RouterBOARD 951Ui 2HnD Capacitor Value

I've knocked off capacitor C954 from the PCB of my RouterBOARD 951Ui 2HnD. It goes between pin 1, V+, and Ground of the USB socket. Would anyone be able to tell me the value of this capacitor? Regards, Glyn. Hello Glyn, #1 Please mark this forum post as a "bug report" or #2 Please write to support@...
by Kreacher
Thu Feb 27, 2014 7:22 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ issue bonding SFP+ ports
Replies: 10
Views: 3572

Re: CCR1036-8G-2S+ issue bonding SFP+ ports

Can it be that this phenomenon depends on different configurations? No, the configuration and software version is identical. I will now clear the configuration and also install the software again. But I will take the 6.6 or 6.7, the 6.10 have realy some problems/bugs. Hm this is not really fine as ...
by Kreacher
Thu Feb 27, 2014 6:49 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Beuatifull towns for the wifes and good (and cheap!) If this should be the main point related to the circumstances where the next MuM will be made or organized, I will be sure that next one will be in Thailand, Bangkok, Pattaya, Koh Samui, Phuket. Not bad, not bad Rudy, you will not only think on o...
by Kreacher
Thu Feb 27, 2014 12:13 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

a small Openwrt or a tiny asterisk installation in metarouter wiuld be very welcome at the RB450G and so the following router or replacement model should have also the same or more RAM inside! Thanks very much for this information related to the brand new RB850Gx2!♬ :D RB850Gx2 is dual-core, so I a...
by Kreacher
Thu Feb 27, 2014 9:24 am
Forum: RouterBOARD hardware
Topic: Routerboard Hardware wish list
Replies: 61
Views: 12822

Re: Routerboard Hardware wish list

x86_64Bit RouterOS - with support for more then 2 GB - and support for ECC / REG RAM - better support of multicore X86_64Bit CPUs or the multicore usage Intel Core i7 & Xeon E5 WLAN Controller - likes a MikroTik Linux OS System with TheDUDE as a Service - with Hardware for Fast Roaming supported on...
by Kreacher
Thu Feb 27, 2014 2:07 am
Forum: RouterBOARD hardware
Topic: Gigabit NAT, home-use, router recommendation
Replies: 21
Views: 16702

Re: Gigabit NAT, home-use, router recommendation

Currently I have RB450G,
If it is even actual, the RB850Gx2 would be great,
announced at the actual MuM at Venice!

RB850Gx2
- RB450G replacement, same form factor
- 500Mhz Dual Core PPC Processor
- hardware acceleration
- 512MB RAM
by Kreacher
Thu Feb 27, 2014 1:52 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

If I sell hundreds of this devices I will worry about APs filling it's storage. Peace of mind and stability are worth more then dolar :). More than 20 € I will pay more for those edge data. MikroTik devices are already freaking cheap (comparing to other vendors) But in my eyes this money counting i...
by Kreacher
Thu Feb 27, 2014 12:41 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

Hello! Could you help me with SSL offload? I plans install http reverse prosy for SSL offload (I know, Tilera CPU supports it on very big speeds) on CCR with Router OS. This is right, but this function must also be inserted first in RouterOS, that we all are able to use it! The Tilera hardware give...
by Kreacher
Thu Feb 27, 2014 12:15 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

The fact that the traffic on my CCR1036 increased to 700-800 Mbps, and the packet loss began. I gave a detailed description of the scheme of testing. At the same RB800 performance testing UDP packets of 64-750 bytes is much higher than the CCR This is not able to practice! I mean the comparing of t...
by Kreacher
Wed Feb 26, 2014 11:56 pm
Forum: RouterBOARD hardware
Topic: high speed Hotspot router
Replies: 4
Views: 1445

Re: high speed Hotspot router

Thanks for the help.

Turn out that the rb2011 has an issue where anything on the gigabit ports is limited to a little over 20 Mbps on any gig port other than the wan port.
- RB800
- RB1100AHx2
- CCR1009
- CCR1016

depending on how many WLAN APs and clients must be sorted and served.
by Kreacher
Wed Feb 26, 2014 11:52 pm
Forum: RouterBOARD hardware
Topic: RB750 PoE on all ports Mod
Replies: 52
Views: 30887

Re: RB750 PoE on all ports Mod

i'm interested in can i upgrade other RB? e.g. RB2011LS-IN...
Also Nice hack!
But for serious or productive production environments it´ll be better
using the ordinary MikroTik PoE injector or a GB PoE injector panel from WaveRF.
by Kreacher
Wed Feb 26, 2014 11:49 pm
Forum: RouterBOARD hardware
Topic: TP-Link TL-WN553AG
Replies: 4
Views: 1482

Re: TP-Link TL-WN553AG

Hi, does TP-Link TL-WN553AG works on x86 mikrotik ?
Thanks !
You only could try it out by your self or watch the MikroTik hardware support database.
by Kreacher
Wed Feb 26, 2014 11:46 pm
Forum: RouterBOARD hardware
Topic: Installing RouterOS on Tilera platforms ?
Replies: 2
Views: 1229

Re: Installing RouterOS on Tilera platforms ?

Hi,

Is it possible to install RouterOS on Tilera platforms like TILEncore-GX72 or GX36 ?

Thanks
From which platforms you are talking?
Made by MikroTik routers called RouterBoards, their CCR series is sold with pre installed
RouterOS.
by Kreacher
Wed Feb 26, 2014 11:37 pm
Forum: RouterBOARD hardware
Topic: 10 GbE Multiport (more than 2) Mikrotik RouterOS router?
Replies: 5
Views: 2054

Re: 10 GbE Multiport (more than 2) Mikrotik RouterOS router?

Well, not too much longer until MUM, so hopefully we will have some news soon. Do any 3rd parties currently make any 10 GbE RouterOS boxes, or has anyone here built their own? Jim - Build your own router by using x86 hardware and than I suggest using HotLava multiport network cards (2, 4 and 6 LAN ...
by Kreacher
Wed Feb 26, 2014 11:24 pm
Forum: RouterBOARD hardware
Topic: Which hardware for Fiber 175/175 with QOS
Replies: 3
Views: 1488

Re: Which hardware for Fiber 175/175 with QOS

Hi, I'm currently using a RB750GL to handle my 175/175 PPPOE Fiber connection. Without packet marking and Queues, my the RB750GL CPU choke the connection to about 140/140 (CPU 100%). With a couple rules to put the priority on VOIP traffic, the speed is reduced to 100/80. And what you really think i...
by Kreacher
Wed Feb 26, 2014 11:16 pm
Forum: RouterBOARD hardware
Topic: Installing Xenserver on Routerboard CCR1016-12G
Replies: 2
Views: 1380

Re: Installing Xenserver on Routerboard CCR1016-12G

Any info would be appreciated Didi you know the new Lanner FW-8895 appliance? Link: Lanner FW-8895 It has the skills and the power to do so! You could install VMWare or Xen and then inside of the VMs RouterOS. See the tech specs on the left side you will be able to insert: 2 x Intel Xeon 29xx CPUs ...
by Kreacher
Wed Feb 26, 2014 11:06 pm
Forum: RouterBOARD hardware
Topic: Power UBNT Radio from 2011UAS-2HnD-IN
Replies: 7
Views: 2156

Re: Power UBNT Radio from 2011UAS-2HnD-IN

Power UBNT Radio from 2011UAS-2HnD-IN Why you want to run this way, it is a U turn in my eyes. - MikroTik is selling PoE injectors - WaveRF is selling a Gigabit 12-port passive POE injector panel - shielded - UBNT is selling their own PoE Switches And now once more again, why you want to power the ...
by Kreacher
Wed Feb 26, 2014 10:55 pm
Forum: RouterBOARD hardware
Topic: BaseBox5 and bonding
Replies: 10
Views: 4454

Re: BaseBox5 and bonding

In the real world: Bonding is not a good idea on wireless links.
I would prefer it to solve this question like other have done it right, by using
two WLAN APs on each side that would be a better solution in my eyes.
by Kreacher
Wed Feb 26, 2014 10:52 pm
Forum: RouterBOARD hardware
Topic: Making LCD useful.
Replies: 19
Views: 5253

Re: Making LCD useful.

So, how about a setting that displays a custom bmp image and only that? For ex. with our logo and contact number for tech support without any touch support. It would surely be better than disabling the LCD. Please mark this question as a bug report under the post topic, I am very sure that here in ...
by Kreacher
Wed Feb 26, 2014 10:48 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ issue bonding SFP+ ports
Replies: 10
Views: 3572

Re: CCR1036-8G-2S+ issue bonding SFP+ ports

How to make throughput tests, when the ports leaves and enters into the LACP channel? Also a ping is not working. #1 Using iPerf from PC to PC or server to server or PC to server #2 Using a server stress tool like this one Webserver stress tool but please be careful this tool is very powerful and i...
by Kreacher
Wed Feb 26, 2014 10:37 pm
Forum: RouterBOARD hardware
Topic: Custom development on CCR1036-8G-2S+
Replies: 1
Views: 698

Re: Custom development on CCR1036-8G-2S+

Hello! I'm interested in developing custom network software based on CCR1036-8G-2S+. Can I replace/add some functions/programms to my standard RouterOS? Can you do this with Cisco OS or Juniper OS? I think this is not really wanted by MikroTik itself, but I think a way to set up something likes Mik...
by Kreacher
Wed Feb 26, 2014 10:15 pm
Forum: RouterBOARD hardware
Topic: RB2011 usage as NAS
Replies: 11
Views: 10011

Re: RB2011 usage as NAS

I checked the wiki: Mac OS 10.8 not supported for SMB, really? I was thinking of maybe moving the crappy and slow disk sharing of my Airport Extreme to the RB2011. The only reason I'm still using the AEBS for this is that I can format the drive as HFS+ so that it can be repaired with DiskWarrior, a...
by Kreacher
Wed Feb 26, 2014 10:04 pm
Forum: RouterBOARD hardware
Topic: CCR Chassis or Cooling
Replies: 1
Views: 895

Re: CCR Chassis or Cooling

There should be a better thermal design to the CCR-1036 and the CCR line in general. While the boards are great, the chassis that they come with is not so great, especially if you are in a warmer data center or location in the rack. I believe part of the issue is with the power supply not having it...
by Kreacher
Wed Feb 26, 2014 8:53 pm
Forum: RouterBOARD hardware
Topic: routerboard like 800 but pci-E
Replies: 2
Views: 1242

Re: routerboard like 800 but pci-E

how soon can we see a routerboard... like rb800 but with 4/8 pci-E?! with expansion board and stuff!! Hello ffernandes, if you are looking for a real MikroTik RouterBoard it`ll be not able to serve your wishes but if you can life without the MikroTik logo but RouterOS is running on the machines I w...
by Kreacher
Wed Feb 26, 2014 8:29 pm
Forum: RouterBOARD hardware
Topic: RB2011 usage as NAS
Replies: 11
Views: 10011

Re: RB2011 usage as NAS

I have a rb2011, I know that a true NAS is better, but I just need a "simple" storage for a surveillance camera... In the meanwhile, may I just use a usb disk connected to the usb port, or it is "possible, but with problems" ? Is there enough power for a 2,5" disk or should I use a powered hub? Gre...
by Kreacher
Wed Feb 26, 2014 8:25 pm
Forum: RouterBOARD hardware
Topic: SFP only router
Replies: 26
Views: 6995

Re: SFP only router

Hi Would really love to see a SFP only CCR. E.g >8 SFP ports for use in e.g our datacenter. Is there talk about this? Hello, - CCR1016-12S-1S+ as announced from MikroTik Cheap, electric saving and related on the port density very cheap. - x86 self made Router with many Intel network cards, I sugges...
by Kreacher
Wed Feb 26, 2014 6:50 pm
Forum: RouterBOARD hardware
Topic: GEPON solution?
Replies: 1
Views: 988

Re: GEPON solution?

Hi, I've been researching GEPON solutions and would want to know if there is someone with this working on Mikrotik hardware. I've seen several threads (some from 2012) with this question. The conclusion of those was that a special SFP that implemented GEPON was needed, but there was little more inf...
by Kreacher
Wed Feb 26, 2014 6:39 pm
Forum: RouterBOARD hardware
Topic: Mikrotik GEPON OLT
Replies: 7
Views: 3004

Re: Mikrotik GEPON OLT

Actual it would be great to see that this Finisar SFP transceivers would be working with RouterOS to surround
the lack of support or better to start the support.
by Kreacher
Wed Feb 26, 2014 6:16 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Alright, we have heard you, and RB850Gx2 will have 512MB NAND also Super, it really should be as JanezFord was explaining it, a small Openwrt or a tiny asterisk installation in metarouter wiuld be very welcome at the RB450G and so the following router or replacement model should have also the same ...
by Kreacher
Wed Feb 26, 2014 12:50 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 58948

Re: MUM Europe 2014 - Italy, Venice, February 20-21

All wating for the Mikrotik AC platform Perhaps a miniPCIe card made by MikroTik for the new MikroTik RB953GS-5HnT that adds the 802.ac standard? - RB850Gx2 I think many of the customers will be happy to hear something about that device! And I agree well done Mikrotik. - CCR1072 I cant await to thi...
by Kreacher
Wed Feb 26, 2014 12:02 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1014188

Re: CLOUD CORE ROUTER

what advise for optimise Queu tree?
Perhaps sometimes in the future an device behind the
CCR-10xx, but also sorted with Tilera many Core CPU
and many ECC RAM so called a "Queue handler" where
all your Queues will be externally stored and this device
is only for the Queues handling!
by Kreacher
Wed Feb 26, 2014 11:47 am
Forum: RouterBOARD hardware
Topic: CCR 1009
Replies: 102
Views: 24293

Re: CCR 1009

Again: April (according to normis' linked post) Did he (normis) told anything over the launching year? It is not that I want to be ungentle, but on the 1th April the most peoples inside many countries are kidding their peoples a little bit and so I was asking my self if this could be also a small j...
by Kreacher
Thu Jan 09, 2014 9:16 pm
Forum: RouterBOARD hardware
Topic: BGP full route
Replies: 10
Views: 2928

Re: BGP full route

I don't see the EdgeRouter Series as a real alternative to the CCR Series. I consider to that meaning, but the Edge Router series is fully 100% compatible to their own equipment, likes their switch series too. MikroTik is using and offering to their clients the HWMP (HWMplus) protocol as I see this...
by Kreacher
Thu Jan 09, 2014 8:52 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G - Mikrotik 24 port switch / Switch chip features
Replies: 4
Views: 2587

Re: CRS125-24G - Mikrotik 24 port switch / Switch chip featu

Kreacher is thinking of the CCR series rather than the CRS series.
You are right it was a mistake of mine.

I also found nothing only a block diagram inside the official MikroTik brochure:
CRS125-24G Block diagram
by Kreacher
Sun Jan 05, 2014 3:02 am
Forum: RouterBOARD hardware
Topic: CRS125-24G - Mikrotik 24 port switch / Switch chip features
Replies: 4
Views: 2587

Re: CRS125-24G - Mikrotik 24 port switch / Switch chip featu

Does anyone know what features are available to be handled by the switch chips in the new CRS125-24G? I couldn't find the model of the switch chip or much information on it when i googled it. I just ordered one so I'll be testing soon too. There are no switch chips inside, all work is done by the m...
by Kreacher
Fri Dec 27, 2013 11:56 pm
Forum: RouterBOARD hardware
Topic: RB110AHx2 disk
Replies: 4
Views: 1396

Re: RB110AHx2 disk

Do that memories could be used to store RouterOS update?
The nand is more for the system itselfs, called RouterOS and the
SD card slots are mostly can be used for logfile storages.
by Kreacher
Thu Dec 26, 2013 10:52 pm
Forum: RouterBOARD hardware
Topic: RB110AHx2 disk
Replies: 4
Views: 1396

Re: RB110AHx2 disk

Hi there, I want to move from RB1000 to RB1100 or CCR. I've noticed that RB1000 and RB1100 series has very small system disk. Is there any possibility to upgrade RouterOS using external microSD on RB1100x2? What is the CCR system disk's size? I think; CCR - microSD card slot 1100AHx2 - microSD card...
by Kreacher
Thu Dec 26, 2013 10:42 pm
Forum: RouterBOARD hardware
Topic: Gigabit NAT, home-use, router recommendation
Replies: 21
Views: 16702

Re: Gigabit NAT, home-use, router recommendation

Hi, Currently I have RB450G, and I really like RouterOS. I'm looking to upgrade my internet connection to a Gigabit one, and I think that I'll need a new router also. Any suggestions for a Gigabit NAT/RouterOS capable router? LE: Forgot to mention, the connection type is PPPOE. MikroTik RB493G = mo...
by Kreacher
Thu Dec 26, 2013 9:48 pm
Forum: RouterBOARD hardware
Topic: RB2011 port disconnecting
Replies: 6
Views: 1915

Re: RB2011 port disconnecting

Did you flushed or wiped out, the default configuration, where the eth1 or LAN Port 1 is the WAN Port?
Or did you use this default config and used it to set up your Router?
by Kreacher
Sat Dec 21, 2013 1:01 pm
Forum: General
Topic: not given internet asses untill 4pm
Replies: 5
Views: 854

Re: not given internet asses untill 4pm

look up time attribute in here: http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Filter +1... either that or use a script. But depending on how you do it they may be able to circumvent it by changing their IP. If there will be a method or change to set up a MAC > IP address binding they will not be...
by Kreacher
Sat Dec 21, 2013 12:58 pm
Forum: Beginner Basics
Topic: Load Balancing on Static IPs
Replies: 11
Views: 2675

Re: Load Balancing on Static IPs

Hi all,
I have same problem with 2 Fiber Optic 4/24 Mbps links with /29 subnet on ISP's hardware,I can use the rest IP's. Cannot loadbalance with PCC. Any help will be appreciated.
Thank you in advance
Policy Based Routing
by Kreacher
Fri Dec 20, 2013 10:00 pm
Forum: General
Topic: Bonding
Replies: 3
Views: 930

Re: Bonding

i have tried a little LACP ( = 802.3ad mode?) LAG (LACP) right is 802.3ad mode this is true! It is for bonding from 2 to a maximum of 8 ports (lines) and it is made exact for loosing a line (port) and otherwise running with lower throughput but running! I am not really fit in those things but as I ...
by Kreacher
Fri Dec 20, 2013 9:53 pm
Forum: General
Topic: 2 Wan - 2 Lan
Replies: 10
Views: 4051

Re: 2 Wan - 2 Lan

Hello Kristijan,

please try out load balancing in combination with policy based routing in combination with
setting up VLANs in your case it would bring in my eyes the most effect and effort.
by Kreacher
Fri Dec 20, 2013 8:30 pm
Forum: General
Topic: Bonding
Replies: 3
Views: 930

Re: Bonding

Salut,

I think if you are trying to use LAG (LACP) the Link aggregation group (LAG) will not collapses any more
this is really better in such case in my poor opinion.
by Kreacher
Fri Dec 20, 2013 8:26 pm
Forum: General
Topic: not given internet asses untill 4pm
Replies: 5
Views: 854

Re: not given internet asses untill 4pm

how can i configure MikroTik 1100 router not to give internet asses from 8am to 4pm You are able to write a script, that is disabling the LAN ports or wan ports like you want, at one time you want to prevent peoples from using the internet and enabling this ports again at another time you need the ...
by Kreacher
Fri Dec 20, 2013 7:49 pm
Forum: RouterBOARD hardware
Topic: MikroTik RB2011UAS-2HnD-IN replacement in future(2013-2014)?
Replies: 15
Views: 3966

Re: MikroTik RB2011UAS-2HnD-IN replacement in future(2013-20

At many distributors are available and away from the www.routerboard.com website, or am I wrong.
by Kreacher
Fri Dec 20, 2013 7:46 pm
Forum: RouterBOARD hardware
Topic: [Solved] SIP Over VPN Problem
Replies: 12
Views: 8419

Re: SIP Over VPN Problem

thank you Mr THG you are genius , it was VPN Nat bypass rule ,
@Hussam
if he was helping you out please fell free to give him a Karma point, this must not paid by yours!
by Kreacher
Fri Dec 20, 2013 7:42 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD-IN Discontinued ?
Replies: 5
Views: 3005

Re: RB2011UAS-2HnD-IN Discontinued ?

Perhaps they are bringing out a newer version, for home and small business usage. Why not it is a great device and was sold in my opinion many times. Perhaps something with: - rsma antenna holes (to connect different antennas) - 1 or 2 mini PCIe slot for connecting your own wlan cards - 3 or 4 anten...
by Kreacher
Fri Dec 20, 2013 7:28 pm
Forum: RouterBOARD hardware
Topic: Which version of the RB1100AH do I have
Replies: 3
Views: 956

Re: Which version of the RB1100AH do I have

write to support@mikrotik.com they are able to answer you this exactly!
But with no fan inside it must be an older version in my eyes.
by Kreacher
Fri Dec 20, 2013 7:22 pm
Forum: RouterBOARD hardware
Topic: BGP full route
Replies: 10
Views: 2928

Re: BGP full route

Do you think a x86 box with higher CPU spec will be better than these two? It could be a way to solve it out. It has bee bring a lot trouble for me. If still not able to resolve it, I may need to replace it with a Cisco 3925 or higher. Could also be a chance to solve the problem, the CCR series is ...
by Kreacher
Fri Dec 20, 2013 7:17 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+
Replies: 16
Views: 3993

Re: CCR1036-8G-2S+

Hello! I'm looking for 1 fiber wdm (SC or LC connector) sfp+ module compatible with ccr1036-8g-2s+ but oem S+31DLC10D, which needs 2 fiber LC. Did anyone tested non-original 10G modules? Maybe Support guys can help with? Thanks. I think it is not wise to warm up old threads, contact and write to su...
by Kreacher
Fri Dec 20, 2013 7:12 pm
Forum: RouterBOARD hardware
Topic: Sound Card interface
Replies: 3
Views: 1238

Re: Sound Card interface

So my question is, is MikroTik compatible with USB sound cards, or is it possible to force it to be?
From my side of view it isn´t able to force, the routers are mostly sorted with a beeper and that is it.
by Kreacher
Fri Dec 20, 2013 7:09 pm
Forum: RouterBOARD hardware
Topic: www.routerboard.com
Replies: 11
Views: 3154

Re: www.routerboard.com

Pretty nice design but I see it also like honzam, a product archive would be round this new web page up
perhaps something named like EoL Products corner or something else.
by Kreacher
Fri Dec 20, 2013 7:06 pm
Forum: RouterBOARD hardware
Topic: CRS switches with two SFP interfaces
Replies: 8
Views: 2115

Re: CRS switches with two SFP interfaces

Dear Mikrotik, are you planning to release CRS switches with two SFP interfaces?
+1 from me for that too. And on top, if you are working it out a nice CRS1072-24S with 24 SFP ports
would also be a good idea.
  • 1
  • 2