MikroTik

Shiro

Is it just me or is "comment" column missing in ipv6 Firewall?

CCR1009-8G-1S-1S+ with Winbox 3.7.

Shiro

Same issue with IPSEC between CCR 1009 and Sophos UTM. I hope we get a fix asap.

Shiro

Awesome for home users.

@rzirzi: My current CCR1009-8G-1S-1S without SFP/Ethernet ideling around 18W and 23W with 2 SFP's + 5 Ethernet Connections. Most time my CCR running with one fan, i thinks that the PC model without fans is around 1-2W less.

Shiro

I got the new Fan's today and installed them. As je1to mentioned they fit perfectly. The Original Chiefly Microtik running around 6000-6300 RPM and keeping the CPU at 53-54C. The NB-BlackSilent Pro running at 4400-4600 RPM and keeping the CPU at 55-56C. They take a little longer to spin up, after th...

Shiro

Related to the fans inside I found this one here, perhaps you would take a short overview if this can be interesting for you. Noiseblocker BlackSilent Pro Fan PM2 Hi all, I justed registered to let you know, that I've installed these fans today. They seem to work perfectly - I don't see any differe...

Shiro

I upgraded from 6.21rc to 6.22rc and the ccr got a kernel panic. i bootet the backup partition and recovered from that.

I used a handcrafted link to get 6.21, no issues so far.

Shiro

My CCR1009 with 6.21rc22 produces 2-3 autosupout mails over the day (kernel crash). Next time i got them i send them to support.

Shiro

Hi,

i updated from 6.20 to 6.21rc15 today. Got lots of Winbox issues. For example IP/DHCP Client, IP/IPSec, System/LED and some other categories crashing Winbox immediately. The Web Interface working without any issues.

Shiro

What is this "SIP Direct Media" ?
Where information about this new feature ?

You can find more about this in iptables documentation. It's a helper that rewrite SIP Header if you using NAT.

Shiro

RB433UAH

6.20 (6.21rc3) no micro-sd disk ( microSDHC Kingston 4GB) > downgrade 6.19 disk view

I already wrote here, but it was deleted. (20 days ago)
same case here, and already sent support output file to support@mikrotik.com).

Same issue with CCR1009. I created a ticket to mt.

Shiro

No. See https://www.ietf.org/rfc/rfc2131.txt

Shiro

You should get more familiar with IPv6 before configuring your RouterOS.

The IPv6 prefix in the Wiki is just an example. Usually you get an /64 /48 prefix from your ISP if they support IPv6.

Shiro

CCR1009-8G-1S-1S+ no longer detecting SD Cards. Tried two sd cards that worked before. Tried restart without success.

Shiro

I get that alot on my CCR1009.

Maybe to large revocation lists? I use cacert.org and some self signed stuff on my Router.

Shiro

Looks like Usermanager has a bug. Nothing was changed. Yes something is wrong, tried to setup a new usermanager with 6.19, state is enabled, but database stay at "backup", tried 2 reboots without success, webinterface is not working. I'm not the only, I'm happy for not do some wrong. I th...

Shiro

Looks like Usermanager has a bug. Nothing was changed.

Yes something is wrong, tried to setup a new usermanager with 6.19, state is enabled, but database stay at "backup", tried 2 reboots without success, webinterface is not working.

Shiro

*) winbox - added dual PSU stats in health menu Still missing PSU stats on CCR1009 in Winbox, see attached screenshot. /system routerboard print routerboard: yes model: CCR1009-8G-1S-1S+ serial-number: 48FF01207EFD current-firmware: 3.18 upgrade-firmware: 3.18 /system health print fan-mode: auto use...

Shiro

Updated a CCR1009 to from 6.18 to 6.19, having issues with dnat from WAN Interface (L2TP with static IP) to my Exchange Server. The issue is that a dnat to port 443 fails to reach the destination host, if something connected to 443 from the wan side, there is no traffic leaving the CCR to the destin...

Shiro

Hi, Have a really strange issue. I have a CCR1016-12G and a 450G at a remote site, They terminate existing IPSEC connections with out any new problem, But I cannot get any performance out of a new IPSEC connection I setup on the CCR, the existing IPSEC connection is fine, and the new connection wor...

Shiro

@Shiro I added store logging, nothing yet.

Thanks for your feedback!

So this is not a normal behaviour. I send a supout to mt.

Shiro

I tried that with my CCR1009, no chance to get "copy to partition" working. It goes over 100% and fails.

Shiro

Installed 6.19rc6 on my CCR1009. I have dnat rules for mail and www. dnat rules involving port 443 never reaches the target host and just timeout. Going back to 6.18 solve this issue. Other ports work fine.

Shiro

Can one of you guys enable logging of "store" in system/logging? Every 5 Minutes, i see activation messages for web-proxy and the sd slot of my CCR1009. I already removed Usermanager because its useless on CCR, after some time, the database went from active to backup and Usermanager is no ...

Shiro

One stream can only be handled by one core at the same time and the limit on one core is around 1 Gb/s with 1,2ghz In an typical enviroment, you have many streams and its more about packets/s and this is handled really well on multicore tilera. If you route/bridge nfs/iscsi or use vmotion to move vm...

Shiro

Did anyone ever tried to use the smart card slot? i wonder if that slot really works.
Anyone knows a compatible card for that slot?

Shiro

Hello i have an CCR1009-8G-1S-1S+ and i connected it to a 10G Switch with SFP+. The Problem is that i get only 1Gbit, but in the cli it says i have 10G name: sfp-sfpplus1 status: link-ok auto-negotiation: done rate: 10Gbps full-duplex: yes tx-flow-control: no rx-flow-control: no advertising: link-p...

Shiro

I had this issue with connecting ESXI to my CCR. Solution was keep auto negotiate on but only advertise 1000m. Without this settings, I get half duplex 100m and other unwanted speeds.

Shiro

I upgraded one of my core routers (x86 type) to 6.17 yesterday and this morning I had no routes to anything plugged into that router. Evidently OSPF was not redistributing static & connected. Once I rebooted it was working. However I did revert back to 6.15 as that I have had no issues with tha...

Shiro

I would really like an global option for "Inline comments" (like "Hide passwords")... Even inline comments checked by default in all tables. The comments on their own line disrupting all the nice tables are annoying. funny, i had the same tought today, love to see this in winbox.

Shiro

UI bug in Winbox 3.0b2 with IPSec Policys. Winbox show wrong priority, real value is 0, -1 is shown and no value is accepted, can't save this policy.

winbox_policy.png

Shiro

On my CCR1009 i still having repeating activation messages. Is this a normal behaviour or maybe a nand issue? if i put that stor on an sd-card, the same happend. 15:35:45 store,debug web-proxy1: disk setup finished successfully 15:35:45 store,debug user-manager1: disk setup finished successfully 15:...

Shiro

Our sstp vpn is extremely stable on 6.15... Are you using SSTP between RouterOS or do you have Windows/other Clients/Servers? I tested SSTP with my CCR1009 (6.15 - 6.17), RouterOS x86 (6.15 - 6.17), Softether in different configurations, RouterOS fails as Server and Client, no issues with idle conn...

Shiro

I've been sticking with 6.7 because of issues with SSTP and Windows clients - can anyone confirm if these problems are fixed? I know that both reliability and performance issues were noted by other users with SSTP + Windows. This issue is still there, i switched everything to l2tp+ipsec because of ...

Shiro

When I select "Profile", the program crashes.....

Same issue here on Windows + MacOS with Crossover/Wine.

Shiro

Nice stuff

Looks like i have to say goodbye to my good old 493G to get 802.11ac /sad

RB953GS-5HnT + R11EAC should be a good replacement for an uptodate ap?

Shiro

Was suprised seeing this new Winbox on the Website and i played a bit around with it, my discovery so far.. Winbox not saving sessions, after moving around several windows to my liking and restarting winbox, everything is gone, i loved that feature on the old Winbox, the checkbox "Load previous...

Shiro

Nice feature with this "fast vpn" setup. Is it possible to enable fast and easy from either command prompt or winbox regardless of quickset? Yes, we have added "Use IPsec" option to L2TP server, so basically you will be able to do the same. IPsec will now become simple, and your...

Shiro

*) snmp - support AES encryption (rfc3826);

the (final?) 6.16 on the servers still missing the AES Encryption option in Winbox and WebUI.

Shiro

*) snmp - support AES encryption (rfc3826);

AES option is missing in Winbox but available on console.

Shiro

I tested 6.16rc18 on following devices: CCR-1009-8G-1S-1S+ RB493G x86 So far no issues. *) l2tp server: added option to enable IPsec automatically; Tested this on CCR and x86: At first, i expected that it forces the client to do ipsec for a successfull connection, but it looks like, it just creates ...

Shiro

Shiro, thank you very much for very fast report.

Now there is updated 6.16rc version available from the same links, that has fix for RB4xx boards.
We will be happy to receive feedback on this version.

Hi Sergejs,

i installed RC18 and the issue is gone.

Thanks for the fast update

Sven

Shiro

Hi, i updated my RB493G (running as AP) from 6.15 and got a reboot loop. On the serial console i see no error, just repeating boot/login prompt and a reboot around 5-10 sec after the boot . No chance to get a supout :/ MikroTik 6.16rc17 mtr17 Login: RouterBOOT booter 3.10 RouterBoard 493G CPU freque...

Shiro

did sstp for win7 clients ever get fixed? or disconnects on pptp when logged into winbox? this all broke after 6.7? anyone not seeing these issues anymore? SSTP is broken for me. I use it on x86, RB493G and CCR-1009, get disconnect on larger amount of traffic/bandwith. CCR as VPN Concentrator? no w...

Shiro

Hi, i have some trouble running my CCR1009 as SSTP client. On the server side, i have a Softether VPN Server, the connection is successfull and i can run stuff like iperf and ssh without any issues or disconnects, but if a use http or try some transfer with scp, the connection instant drops and reco...

Shiro

I have a few issues with my CCR1009-8G-1S-1S. One issue is the sd card slot, sometimes the usermanager store on that medium disappear, in winbox i can see that usermanager store is on state backup and not active. sometimes it set itself to active, sometimes a reboot helps, i tried two different sd c...

Shiro

PPPOE Server Multicore makes sense (and we have that since 6.12?). For PPPOE client, I see no need to make it multicore because its a single link and I think it's hard to make it multithreaded to distribute it over more than one core. Which ISP pushes more than 100mbit over PPPOE? imho PPP is ancien...

Shiro

Is it normal for PPP/L2TP/SSTP connection to drop and reconnect after adding a comment to the interface? can't remember seeing this behavior on older version of routeros.

Shiro

Hi, i trying to make a VPN connection with Astrill using SSTP. Problem is the connection or handshake didn't work. Using this server with a Windows SSTP connection works perfectly. config: 4 name="Astrill-VPN" remote-ipv6-prefix-pool=none use-ipv6=default use-mpls=default use-compression=d...

Shiro

I can understand to limit the CCR-1009, but for a CCR-1016 (SFP one) i expected dimm slots. My CCR-1009 is running in my lab with 4 bgp full feeds, usermanager for radius and a few l2tp connections and there is still enough ram left :) For the 1036 (future revisions) and the coming 1072 model, i hop...

Shiro

I got my CCR-1009 4 days ago and testing some stuff, i found something strange. If i plug a 10 gig sfp+ in my CCR-1009, the device Fan slows down/almost stopped for a moment and speed up again, but not at the same speed without that sfp module. It happens on both ports. sfp and sfp+. From informatio...

Shiro

[x@mx] /interface ethernet switch port> print Flags: I - invalid # NAME SWITCH VLAN-MODE VLAN-HEADER DEFAULT-VLAN-ID 0 ether1 switch1 disabled leave-as-is auto 1 ether2 switch1 disabled leave-as-is auto 2 ether3 switch1 disabled leave-as-is auto 3 ether4 switch1 disabled leave-as-is auto 4 switch1-c...

Shiro

What's new in 6.13 (2014-May-15 16:03):: *) console - comments are now accepted where new command can start, that is, where '/' or ':' characters can be used to start new command, e.g. /interface { # comment until the end of the line print } *) backup - backups by default are encrypted now (with us...

Shiro

can come one post architecture diagram of 1009? None is available yet but it isn't too hard to puzzle together. SFP port : Direct CPU SFP+ port : Direct CPU Port 1-4: Switch with 1Gbps CPU uplink to CPU (Basically a 5 port switch chip with one port internally connected) Port 5-8: Direct CPU Did you...

Shiro

Thanks for the review and pictures, still waiting for my ccr1009 to arrive :]

Shiro

Yes, i reported it.

I think all this new CCR optimization stuff comes to fast without enough testing, they introduce way to many new bugs to use them in production :/

Shiro

Do you encounter any other issues with 6.11? i have have issues with PPP dying on pppoe or l2tp disconnection. All services/connections that use PPP instantly stop working until I reboot the machine/router. On shutdown, I can see PPP timeout messages on the console. This doesn't happend on 6.11rc.

Shiro

Hi, I updated my RB493g from 6.11rc1 to 6.11 package from yesterday (14.03.). I got the following issue, randomly ppp dies. I have to permanent pppoe dsl session, one permanent l2tp connection and two l2tp road warriors. After login in with one of my l2tp roadwarriors, all ppp session crashed. I was...

Shiro

Updated two 493g and two 411ah from 6.7 to 6.9, no issues so far. PPTP, IPSec, L2TP tunnels working, No change on The Wireless side, everything is fine so far. I wonder why some of you talk about Firmware 3.11. In Routerboard/Upgrade there is only 3.10 and upgrade 3.10. When pressing upgrade and reb...

Shiro

I got this after updating my RB493G from Ros 6.4 to 6.6rc1... after rebooting, all firewall rules got removed except nat and mangle.

Shiro

Hi, i have trouble with my new RB493G. I have 2 uplinks, one dsl pppoe connection with static ip and a cable connection using dhcp to get my dynamic address, some basic firewall rules for nat and portforward, 2 l2tp/ipsec tunnels. i use the dhcp server of my cisco switch for my lan and not the one o...

Shiro

My 493G not booting any more after upgrading firmware included in ROS 6.5 (from v3.08 to v 3.10). LEDs lid but no beeps or anything! Any ideas? Please help ASAP! It worked for me, new unit delivered with 5.25/3.05 upgraded to 5.26/3.07. after that I switched to 6.5 and updated the firmware to 3.10 ...

Shiro

New RB493G Unit, updated from 5.25 to 6.5 and started with a new configuration. Importing certificates didn't work, CPU goes 100% and after 30 Minutes waiting it still at 100%, in files, I see a supout file appearing by itself (support debug log?). So no chance to get any certificates into my RB493G...

Shiro

Hi,

Thanks for your feedback, I already send it in for replacement, I hope the replacement unit do better.

Shiro

hi,

I can see the progress in Netinstall, under the drive/devices list is a status line showing what's happening.

Shiro

Hi, i got a new Routerboard 493G yesterday. On first boot i hear that starting noise from the pizzo and everything looks normal. I startet Winbox and waited for the Routerboard, but nothing show up, after some time i hear that starting noise again and all ethernet ports lid up, this repeats every 30...

Search found 65 matches