Community discussions

Search found 22 matches

by jnygard
Tue Feb 26, 2019 10:21 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36174

Re: v6.44 [stable] is released!

I got new features on my hAP mini! Interface #3, pwr-line1 Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU 0 RS ether1-GW ether 1500 1598 2028 1 RS ether2-Telia ether 1500 1598 2028 2 RS ether3-RaspberryPi ether 1500 1598 2028 3 pwr-line1 ether 1500 15...
by jnygard
Sat Jun 18, 2016 9:53 pm
Forum: RouterBOARD hardware
Topic: SXT Lite 5ac using 2.4 as AP
Replies: 8
Views: 1703

Re: SXT Lite 5ac using 2.4 as AP

I tested that and it works just as I hoped it would:

http://forum.mikrotik.com/viewtopic.php ... 60#p518660
by jnygard
Tue Mar 01, 2016 11:30 pm
Forum: RouterBOARD hardware
Topic: RBSXT LTE
Replies: 59
Views: 20690

Re: RBSXT LTE

Why is it not possible to bridge the LTE and ethernet port together? Now there is one additional NAT in the network setup because of this...
by jnygard
Sat Jan 30, 2016 6:07 pm
Forum: RouterBOARD hardware
Topic: New SXT AC Lite
Replies: 22
Views: 3816

Re: New SXT AC Lite

Interesting trick: I bumped the license up to level 4 and I now have a 2 chain 5 GHz ac AP AND a 1 chain 2 GHz AP that can serve MULTIPLE clients! Away went the limit of only one client connected to the 2 GHz interface!!!
by jnygard
Mon Dec 29, 2014 8:14 am
Forum: RouterBOARD hardware
Topic: RB912UAG-2HPnD + R11e-5HACD and USB port device
Replies: 15
Views: 3728

Re: RB912UAG-2HPnD + R11e-5HACD and USB port device

I have installed R11e-5HacD on RB/953GS-5HnT but it’s not shown in the interface list!
Remember that you need to activate the wireless-fp package to enable the R11e-5HacD...
by jnygard
Sat Nov 29, 2014 10:13 am
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 51231

Re: New hardware - mAP

Does Mikrotik have a specific reason why the USB port is a Micro-AB port? These type of ports break down quite easy as you can by mistake insert a Micro-B connector the wrong way. I would suggest that the port would be switched to a Micro-B port in the future...
by jnygard
Mon Nov 10, 2014 8:39 am
Forum: RouterBOARD hardware
Topic: RB912UAG-2HPnD + R11e-5HACD and USB port device
Replies: 15
Views: 3728

Re: RB912UAG-2HPnD + R11e-5HACD and USB port device

So the next question is, does the RB953GS-5HnT have a USB hub so that one can run 2 miniPCIe modems AND a USB device at the same time? http://routerboard.com/RB953GS-5HnT edit: answer was in the pdf: One powered USB 2.0 port, cannot be used simultaneously with J404 miniPCIe slot for 3G modem (softwa...
by jnygard
Fri Oct 31, 2014 1:41 pm
Forum: RouterBOARD hardware
Topic: RB912UAG-2HPnD + R11e-5HACD and USB port device
Replies: 15
Views: 3728

Re: RB912UAG-2HPnD + R11e-5HACD and USB port device

Cool! This opens up new options in my network design now!
by jnygard
Fri Oct 31, 2014 12:42 pm
Forum: RouterBOARD hardware
Topic: RB912UAG-2HPnD + R11e-5HACD and USB port device
Replies: 15
Views: 3728

RB912UAG-2HPnD + R11e-5HACD and USB port device

Just noticed a thing that I didn't think was possible: I have a RB912 that is equipped with a r11e-5HACD MiniPCIe card and I'm still able to use the USB port for a 3G modem! Shouldn't the r11e in the MiniPCIe slot disable the USB port? Or is it just odd luck that it happens to work when load on the ...
by jnygard
Fri Oct 31, 2014 12:21 pm
Forum: Wireless Networking
Topic: RB912UAG fails to recognize R11E mini PCI express
Replies: 3
Views: 901

Re: RB912UAG fails to recognize R11E mini PCI express

I have 2 of the RB912 2GHz versions running a r11e-5HACD inside and they work just as they should...

Did you enable wireless-fp? R11e-5HACD needs that...
by jnygard
Thu Jul 31, 2014 11:40 pm
Forum: RouterBOARD hardware
Topic: RB912UAG-2HPnD vs RBMetal2SHPn as an AP
Replies: 3
Views: 849

Re: RB912UAG-2HPnD vs RBMetal2SHPn as an AP

Do note that the RB912 is a dual chain device and Metal/Groove only has one WiFi chain... With a large amount of users the benefit of two chains is evident...
by jnygard
Sat Jul 12, 2014 2:32 pm
Forum: RouterBOARD hardware
Topic: RB751G-2HnD + WN722N(AR9271) doesn't work
Replies: 40
Views: 9155

Re: RB751G-2HnD + WN722N(AR9271) doesn't work

I have a RB951G-2HnD on ROS 5.26 and it works with the WN772N. 6.XX branch drops the functionality...
by jnygard
Mon Jun 23, 2014 8:37 am
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 51231

Re: New hardware - mAP

There is a MAC address listed only for ETH1 & WLAN, does this mean that ETH2 is only for PoE out use?
by jnygard
Fri Apr 11, 2014 11:55 pm
Forum: RouterBOARD hardware
Topic: normal temp of RB912??
Replies: 5
Views: 1601

Re: normal temp of RB912??

What is the ambient temperature that the box is in?
by jnygard
Wed Feb 26, 2014 8:10 am
Forum: RouterBOARD hardware
Topic: rb951-2n future suggestion ?
Replies: 4
Views: 2300

Re: rb951-2n future suggestion ?

OK, by feeding the USB port externally with 5V then the port comes alive but on the board there doesn't seem to be a point where to pull 5V from. Would need to build one from the main power line. Seems like the system is more or less running on a 3.3v voltage...
by jnygard
Tue Feb 25, 2014 10:33 am
Forum: General
Topic: Mikrotik RB4XX with Sierra Wireless MC7710
Replies: 52
Views: 24866

Re: Mikrotik RB4XX with Sierra Wireless MC7710

Have you switched the port type from USB to mini-PCIe?

http://wiki.mikrotik.com/wiki/Manual:US ... _port_type
by jnygard
Wed Feb 19, 2014 9:06 pm
Forum: RouterBOARD hardware
Topic: rb951-2n future suggestion ?
Replies: 4
Views: 2300

Re: rb951-2n future suggestion ?

Tried the USB mod on my 951-2n... Does not work. No power supplied to the connector at all. Bummer!
by jnygard
Tue Jan 21, 2014 1:34 pm
Forum: RouterBOARD hardware
Topic: 3G/LTE cards DIP or QMI -Which is supported by MikroTik
Replies: 5
Views: 6877

Re: 3G/LTE cards DIP or QMI -Which is supported by MikroTik

The MC7710 uses u.fl connectors on board and I have SMA-u.fl pigtails. An external antenna is connected to the SMA connectors. You need to know what frequency you will use for your cell connection and choose the antenna to match that. Running ROS6.7 and newest FW03.05.24.00 on the MC7710 so can't sa...
by jnygard
Fri Jan 17, 2014 9:04 am
Forum: RouterBOARD hardware
Topic: 3G/LTE cards DIP or QMI -Which is supported by MikroTik
Replies: 5
Views: 6877

Re: 3G/LTE cards DIP or QMI -Which is supported by MikroTik

I use the Sierra Wireless MC7710 LTE module with a RB912UAG in DIP mode. I'm very happy with the stability compared to a USB dongle especially in weak signal strength conditions...
by jnygard
Thu Oct 17, 2013 9:46 am
Forum: RouterBOARD hardware
Topic: hardware issues with rb4xx
Replies: 45
Views: 16332

Re: hardware issues with rb4xx

An old thread will be lifted up but: I have a recently bought RB411GL that stopped working, nothing seems to help. Netinstall 6.4 and 5.26 both completes successfully but on reboot all board leds lite up and stay that way until power down. Only way to bypass that is to press reset while powering up ...
by jnygard
Mon Oct 07, 2013 3:11 pm
Forum: Beginner Basics
Topic: RB912UAG-2HPnD RouterBoot update to 3.10 problem
Replies: 0
Views: 776

RB912UAG-2HPnD RouterBoot update to 3.10 problem

Hello, The routerboot ar9344-3.10.fwf file found for the RB912UAG-2HPnD on http://routerboard.com/RB912UAG-2HPnD does not work. For both the RB912UAG-5HPnD and the RB912UAG-5HPnD-OUT the file is ar9340-3.10.fwf. Is the file listed for the 2GHz model the wrong one? Atleast I'm not able to update my R...