Community discussions

Search found 669 matches

by freemannnn
Fri Oct 18, 2019 3:46 pm
Forum: General
Topic: Multiple concurrent PPPoE over single ethernet
Replies: 12
Views: 432

Re: Multiple concurrent PPPoE over single ethernet

who said i dont have the mangle pcc rules? :D
You said nothing about mangles on the previous post...
the topic is about pppoe problem not about pcc or mangle or anything else. lets not hijack it.
by freemannnn
Fri Oct 18, 2019 3:29 pm
Forum: General
Topic: Multiple concurrent PPPoE over single ethernet
Replies: 12
Views: 432

Re: Multiple concurrent PPPoE over single ethernet

i run 2 pppoe connections at same ethernet (ether1) from 2 different internet providers (2 vdsl modems) without problems. even load balance or failover is working properly. but your situation may be different as previous post said. This is failover... Not traffic ballancing... Load ballance needs m...
by freemannnn
Fri Oct 18, 2019 10:43 am
Forum: General
Topic: Multiple concurrent PPPoE over single ethernet
Replies: 12
Views: 432

Re: Multiple concurrent PPPoE over single ethernet

i run 2 pppoe connections at same ethernet (ether1) from 2 different internet providers (2 vdsl modems) without problems. even load balance or failover is working properly.
but your situation may be different as previous post said.
by freemannnn
Sun Sep 29, 2019 12:07 pm
Forum: The User Manager
Topic: user manager nightmare
Replies: 3
Views: 665

Re: user manager nightmare

I change the sd today i install one 32gb. Lets see how it goes.
Does rb1100 except every sd card?
I mean sdxc is compatible?
by freemannnn
Sat Sep 28, 2019 7:13 pm
Forum: The User Manager
Topic: user manager nightmare
Replies: 3
Views: 665

user manager nightmare

4 years everything was working ok running user manager at a windows pc with virtualbox. no corruptions no problems even with power outages. i suggested my customer and we bought a rb1100ahx4 level 6 and i install a 16gb sd card. today (10 days operation) problems started you can see in attachments. ...
by freemannnn
Tue Sep 24, 2019 10:35 am
Forum: Scripting
Topic: Solution: Automatically clean expired User-Manager accounts
Replies: 72
Views: 45693

Re: Solution: Automatically clean expired User-Manager accounts

With UM latest version, it is easy to accomplish:
Look for [Users]
[Total time left] [is] [equal to] type 0 (zero)
and click Search... voila. There the expired users list that you can remove from the menu bar command.
the is not [Total time left] just [Time Left]
by freemannnn
Thu Sep 19, 2019 6:00 pm
Forum: The User Manager
Topic: ccr 1009-8g-1s USB problem
Replies: 5
Views: 937

Re: ccr 1009-8g-1s USB problem

i just plugged it and worked nothing more.
by freemannnn
Wed Sep 18, 2019 8:25 pm
Forum: The User Manager
Topic: ccr 1009-8g-1s USB problem
Replies: 5
Views: 937

Re: ccr 1009-8g-1s USB problem

i am using CCR+user manager with this micro usb flash drive. OTG cable was very unstable also for me because CCR port is very delicate.
by freemannnn
Wed Sep 18, 2019 8:05 pm
Forum: General
Topic: winbox Dark Mode
Replies: 9
Views: 1075

Re: winbox Dark Mode

i am curious how winbox would look with the colors of dark mode of unifi. wish i knew photoshop lol.
by freemannnn
Wed Sep 18, 2019 7:36 pm
Forum: General
Topic: winbox Dark Mode
Replies: 9
Views: 1075

Re: winbox Dark Mode

so much WHITE color of every window (firewall, dhcp etc) . black or dark blue foreground with white or grey text should help at nights. also address book at start so bright.
take a look at UNIFI CONTROLLER dark mode. google it.
chrome also has SLATE skin. so nice color.
by freemannnn
Wed Sep 18, 2019 7:31 pm
Forum: General
Topic: winbox Dark Mode
Replies: 9
Views: 1075

Re: winbox Dark Mode

of course i propose to be a choise from the user. light or dark selectable by the user.
by freemannnn
Wed Sep 18, 2019 6:45 pm
Forum: General
Topic: winbox Dark Mode
Replies: 9
Views: 1075

winbox Dark Mode

tomorrow apple IOS 13 will support dark mode, windows 10 has light and dark theme, chrome also has, ubnt unifi has.
isn't time also for winbox? god so much brightness when you open winbox and you have open tabs saved inside.
by freemannnn
Sun Sep 15, 2019 9:53 am
Forum: The User Manager
Topic: user manager usb disk not found
Replies: 7
Views: 1503

Re: user manager usb disk not found

yes Bend or pull the OTG-cable and you are out of luck so i dismissed the OTG-Cable. now on my CCR customer i am using flash drive with micro-USB. Its not loose anymore. this season (6 months) not a problem with 6.43.14. didnt thought of using an SSD though. good idea. i am using this.. https://www....
by freemannnn
Sat Sep 14, 2019 7:53 pm
Forum: The User Manager
Topic: user manager usb disk not found
Replies: 7
Views: 1503

Re: user manager usb disk not found

I use userman with an external USB-SSD with OTG-Cable without problems for two years now. Before that I had tried internal memory (not good, too much wear, random errors) and an external USB-drive with micro-usb port (not good, drive often remounted with another name). Since I put the USB-SSD on th...
by freemannnn
Thu Aug 15, 2019 1:41 pm
Forum: General
Topic: Please add documentation for ping-timeout added in 6.43
Replies: 11
Views: 1146

Re: Please add documentation for ping-timeout added in 6.43

yes please update watchdog manual.
by freemannnn
Wed Aug 14, 2019 3:11 pm
Forum: General
Topic: GPeR with sxt 2 (RBSXTG-2HnD)
Replies: 3
Views: 628

Re: GPeR with sxt 2 (RBSXTG-2HnD)

i see that GPeR input is 802.3af/at. sxt 2 is only passive poe. will that work?
by freemannnn
Sat Aug 10, 2019 6:49 pm
Forum: General
Topic: GPeR with sxt 2 (RBSXTG-2HnD)
Replies: 3
Views: 628

GPeR with sxt 2 (RBSXTG-2HnD)

i have an installation that i need to power sxt 2 ( passive poe ). distance must be around 150m. can i use in the middle (80m) GPeR to extend the distance and successfully power on sxt 2 ? havent used them before so i dont know if they will fit-succeed to my installation. at a previous installation ...
by freemannnn
Wed Aug 07, 2019 1:32 pm
Forum: Wireless Networking
Topic: Question about antenna gain setting
Replies: 4
Views: 610

Re: Question about antenna gain setting

in the latest ros versions (i think >6.43) antenna gain is filled automaticaly when you set regulatory domain and your country. for example hap lite has antenna gain 2. rb951 has antenna gain 3. rb2011 has 4.
by freemannnn
Tue Aug 06, 2019 10:50 am
Forum: General
Topic: admin password getting to default
Replies: 6
Views: 587

Re: admin password getting to default

netinstall and password protect device.
by freemannnn
Thu Aug 01, 2019 3:15 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD naming
Replies: 47
Views: 24534

Re: RouterBOARD naming

yes hex s is so sexy. my favorite design. black grey and little orange. so beatuful. i wish it had wifi
by freemannnn
Fri Jul 19, 2019 5:53 pm
Forum: General
Topic: RB2011UiAS-RM - High CPU on Download
Replies: 6
Views: 813

Re: RB2011UiAS-RM - High CPU on Download

Turn on fasttrack rule in ip firewall filter
by freemannnn
Fri Jul 05, 2019 3:43 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 70015

Re: v6.45.1 [stable] is released!

I am having 350 plus hotspot locations as my clients and hAP lite is being used almost @ 50 locations, and they got updated automatic. Now from every of those location I am getting complaints that hotspot login page is not coming automatically. user need to put the hotspot gateway ip or hotspot dns...
by freemannnn
Thu Jul 04, 2019 3:47 pm
Forum: General
Topic: Cloud Backup
Replies: 20
Views: 3730

Re: Cloud Backup

Here is an example "/system backup cloud upload-file action=create-and-upload replace=cloud-XXXXXXXX-XXXXXX password=123"
by freemannnn
Mon Jul 01, 2019 11:15 am
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 70015

Re: v6.45.1 [stable] is released!

- cloud - added "replace" parameter for backup "upload-file" command;

what is the correct syntax to replace file? wiki is not updated yet.
please add backup and restore function in winbox.
by freemannnn
Mon Jun 10, 2019 3:54 pm
Forum: RouterBOARD hardware
Topic: RB3011suddenly loses USB flash drive
Replies: 16
Views: 2783

Re: RB3011suddenly loses USB flash drive

i have the same problem in a CCR1009-7G-1C for user manager. when this happens the usb disk is changing/losing disk name and user manager database is corrupt. this is happening random every some months. i have to format usb flash drive and start a new user manager database. next time it will happen ...
by freemannnn
Wed Jun 05, 2019 1:06 pm
Forum: General
Topic: LiveStreaming Upload Bandwidth choked by HexS
Replies: 2
Views: 214

Re: LiveStreaming Upload Bandwidth choked by HexS

quick dirty sollution you can reset it to defaults and test speeds.
keep a backup first in case you need to restore.
by freemannnn
Sun Jun 02, 2019 6:37 pm
Forum: Wireless Networking
Topic: Mikrotik WLAN & CAPsMAN - Bad download perfomance
Replies: 47
Views: 5445

Re: Mikrotik WLAN & CAPsMAN - Bad download perfomance

what confuse me is if capsman local vs forward affects "simple internet usage" like a hotel hotspot vs home/office local traffic between various devices like laptop to laptop to transfer big size files. i mean in a hotel hotspot for example a user is downloading or uploading from his mobile device. ...
by freemannnn
Sun Jun 02, 2019 5:57 pm
Forum: Wireless Networking
Topic: Mikrotik WLAN & CAPsMAN - Bad download perfomance
Replies: 47
Views: 5445

Re: Mikrotik WLAN & CAPsMAN - Bad download perfomance

@Bivvy: when datapath is configured to use capsman's bridge, this usually becomes a srrious bottleneck. If you don't have a good reason not to, set datapath to local-firwarding=yes ... and the rest of appropriate settings. does this count if we have a heavy duty ros hardware? i mean like ccr or rb1...
by freemannnn
Thu May 23, 2019 2:32 pm
Forum: Wireless Networking
Topic: CAPsMAN channel selection
Replies: 7
Views: 1057

Re: CAPsMAN channel selection


Access poits to have no direct visibility.
what do you mean by that?
by freemannnn
Tue May 21, 2019 4:07 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71354

Re: v6.45beta [testing] is released!

*) defconf - changed default configuration type to AP for cAP series devices;

this should be done also for wap series.
by freemannnn
Mon May 20, 2019 12:53 pm
Forum: Wireless Networking
Topic: CAPsMAN channel selection
Replies: 7
Views: 1057

Re: CAPsMAN channel selection

is it ok setting manualy Tx Power to 10 or less. i try to minimize connecting distance for a pool area.
for example i have set at my wap ac tx power for 2.4ghz 10 and for 5ghz 15.
can i go lower or is not a good idea?
by freemannnn
Tue Apr 23, 2019 3:36 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM - 24x7 fans or temperature sensitive?
Replies: 64
Views: 9246

Re: CRS328-24P-4S+RM - 24x7 fans or temperature sensitive?

i am glad mikrotik fans start at 40c. Ubiquiti Unifi Switch 16-150W fan start at 75c. there are many posts about that problem or whatever it is at unifi forums.
i am better with noise than overheating.
by freemannnn
Mon Apr 01, 2019 7:36 pm
Forum: General
Topic: Romon - UBNT
Replies: 4
Views: 863

Re: Romon - UBNT

"deltamc2000" your sollution is working but is not permament. if you reboot the unifi switch the configuration is lost and no romon again. is there any way for permanent sollution?
by freemannnn
Fri Mar 22, 2019 12:46 pm
Forum: General
Topic: latest RB2011UiAS-2HnD-IN beeper is missing
Replies: 6
Views: 427

Re: latest RB2011UiAS-2HnD-IN beeper is missing

they change block diagram. i have RB2011UiAS-2HnD-IN at home with beeper but without the poe out at ether10.
by freemannnn
Fri Mar 22, 2019 11:59 am
Forum: General
Topic: latest RB2011UiAS-2HnD-IN beeper is missing
Replies: 6
Views: 427

latest RB2011UiAS-2HnD-IN beeper is missing

just got a new RB2011UiAS-2HnD-IN and beeper is missing. :(
by freemannnn
Thu Mar 21, 2019 11:08 pm
Forum: General
Topic: Attempt of attacks through Remote Desktop [SOLVED]
Replies: 6
Views: 532

Re: Attempt of attacks through Remote Desktop [SOLVED]

you can use firewall address list to allow rdp only for specific incoming ip's.

or

https://wiki.mikrotik.com/wiki/Brutefor ... prevention
by freemannnn
Fri Mar 08, 2019 11:01 am
Forum: General
Topic: Cloud Backup
Replies: 20
Views: 3730

Re: Cloud Backup

1. i would like winbox menu and not only cli. 2. at winbox window (where is cpu,memory info etc) would be nice to show last backup date (if exist) or saying "this device is not backup to mikrotik servers". 3. when upload a backup for second time or more there should be a parameter "replace=yes" to o...
by freemannnn
Wed Mar 06, 2019 4:32 pm
Forum: RouterBOARD hardware
Topic: No beeper on HAP AC2
Replies: 3
Views: 544

Re: No beeper on HAP AC2

for me also beeper is a useful tool. these are some examples. i believe there are more. 1. you know when router finished booting process. (beep, beep-beep) 2. usage with scripting when you want a beep when an event has occured. 3. sometimes in high places you cannot see if the router is turned on. b...
by freemannnn
Thu Feb 28, 2019 4:03 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36386

Re: v6.44 [stable] is released!

this "pwr-line1" interface appeared after upgrade to 6.44 on a haplite.
by freemannnn
Tue Feb 26, 2019 3:41 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36386

Re: v6.44 [stable] is released!

can we have cloud backup in winbox. me not so fan of cli.
options like restore,backup,delete and information of already uploaded backup will be nice in a menu. or maybe in the top of winbox information of last backup that exist or not in mikrotik server.
by freemannnn
Wed Feb 13, 2019 12:35 pm
Forum: Announcements
Topic: Winbox v3.18 released!
Replies: 49
Views: 71345

Re: Winbox v3.18 released!

can someone confirm this...
try double clicking on top right field "cpu or memory or uptime"
after that you cant terminate winbox, menu and windows inside winbox are inaccesible. you have to right click many times random inside winbox to make menu and windows accesible.
by freemannnn
Tue Feb 12, 2019 10:30 pm
Forum: Wireless Networking
Topic: CAPSMAN: "create enabled" versus "create dynamic enabled"
Replies: 5
Views: 2322

Re: CAPSMAN: "create enabled" versus "create dynamic enabled"

i still prefer static interfaces than making dozens provisioning rules. sorry "mducharme".
also i want to specify "exact interface name" by myself and no with provisioning rules.
by freemannnn
Tue Feb 12, 2019 10:26 pm
Forum: Beginner Basics
Topic: hex lite (RB750r2) vs hex (RB750Gr3) for home network
Replies: 8
Views: 1270

Re: hex lite (RB750r2) vs hex (RB750Gr3) for home network

at the moment best router/price around 50-70euros is HAP AC 2. everything you need in this small magic box! it has also 2.4ghz/5ghz wifi. models you suggest dont have wifi.

https://mikrotik.com/product/hap_ac2
by freemannnn
Fri Jan 18, 2019 3:45 pm
Forum: Wireless Networking
Topic: How to bridge dynamic interfaces from CAPsMAN?
Replies: 1
Views: 276

Re: How to bridge dynamic interfaces from CAPsMAN?

why not provision caps as static? at capsman-provisioning rule you select "create enabled"
by freemannnn
Fri Jan 18, 2019 11:46 am
Forum: General
Topic: mikrotik products release dates not shown
Replies: 4
Views: 498

Re: mikrotik products release dates not shown

why not? wouldnt hurt. it is just for information pursposes. today i was thinking how old is Q8400 intel cpu and that info is written in intel product site. (Launch Date: Q2'09)

https://ark.intel.com/products/38512/In ... 3-MHz-FSB-
by freemannnn
Fri Jan 18, 2019 10:49 am
Forum: General
Topic: mikrotik products release dates not shown
Replies: 4
Views: 498

mikrotik products release dates not shown

would be usefull in every product page to specify the release date of product.
i am curious how old are rb2011, rb1100ahx2, rb951ui-2hnd, RBSXTG-2HnD.
i can make some calculations with initial firmware they had but this is not the proper way.
by freemannnn
Wed Jan 16, 2019 11:24 am
Forum: General
Topic: RB1100AHx2 boot speed vs others
Replies: 3
Views: 408

Re: RB1100AHx2 boot speed vs others

tried your suggestion on hex s that has very powerful cpu and it is not even close to rb1100ahx2 boot speed. truth is hex s boots like rb2011 speed.
so what makes rb1100ahx2 boot speed so special?
by freemannnn
Tue Jan 15, 2019 7:51 pm
Forum: General
Topic: RB1100AHx2 boot speed vs others
Replies: 3
Views: 408

RB1100AHx2 boot speed vs others

i remember myself surprised from how fast boot speed the RB1100AHx2 has (maybe 5-10 second). was expecting this boot speed from hex s or ccr1009 but they are not even closer. why?
my rb2011 boots at 30sec. boot speed for me starts when i press reboot at winbox until i hear 2 beeps.
by freemannnn
Wed Jan 09, 2019 2:42 pm
Forum: Announcements
Topic: v6.42.11 [long-term] is released!
Replies: 42
Views: 9092

Re: v6.42.11 [long-term] is released!

Tried to update to 6.42.11 from 6.42.9 on a hEX using "Download and install", then realized I needed to check something so hit Cancel at about 90% downloaded. I then tried "Download and install" later and it says "not enough disk space" and there's no files available to delete. How do I delete this...
by freemannnn
Mon Nov 26, 2018 11:32 am
Forum: General
Topic: Blocking DHCP with bridge firewall
Replies: 2
Views: 10372

Re: Blocking DHCP with bridge firewall

ros 6.43 and later supports DHCP Option 82 / DHCP-Snooping
by freemannnn
Thu Nov 15, 2018 7:10 pm
Forum: General
Topic: IP Neighbor Discovery
Replies: 12
Views: 2254

Re: IP Neighbor Discovery

is chain=input right? input is for traffic going to router itself.
chain=forward maybe?
by freemannnn
Thu Nov 01, 2018 5:36 pm
Forum: Wireless Networking
Topic: MAP / CAPSMAN SETUP
Replies: 6
Views: 942

Re: MAP / CAPSMAN SETUP

did u manage to resolve your second question?

i am trying to achieve the same thing with hap lites as caps. is it possible devices connected to ethernet interfaces of hap lite like laptop or pc, to get ip address from capsman dhcp?
by freemannnn
Mon Oct 15, 2018 9:48 am
Forum: General
Topic: Random Reboots
Replies: 7
Views: 859

Re: Random Reboots

maybe the power supply is faulty.
by freemannnn
Thu Oct 04, 2018 12:40 pm
Forum: General
Topic: queue problem
Replies: 16
Views: 1209

Re: queue problem

disable fasttrack in firewall filter rules.
by freemannnn
Tue Sep 18, 2018 11:44 am
Forum: General
Topic: New IP cloud is coming.
Replies: 84
Views: 27024

Re: New IP cloud is coming.

free cloud backup. very nice really nice.
one tip, there is option to schedule to backup every xx days to cloud automatically. (of course you can do it with scheduler, but i am just saying)
by freemannnn
Tue Sep 18, 2018 11:19 am
Forum: General
Topic: New IP cloud is coming.
Replies: 84
Views: 27024

Re: New IP cloud is coming.

!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);

is this for backup configuration to cloud? free?
if yes VERY NICE MIKROTIK.
by freemannnn
Mon Sep 10, 2018 10:01 am
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 148
Views: 28886

Re: v6.43 [current] is released!

wow. nice start of week!!!
ip cloud service and winbox connection so fast now.
dhcp snooping....love u guys!
by freemannnn
Fri Sep 07, 2018 2:48 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 70600

Re: RB4011

looking at the block diagram, does it missing speaker? i hope not.

https://i.mt.lv/cdn/rb_files/RB4011iGSp ... 142219.png
by freemannnn
Thu Sep 06, 2018 2:55 pm
Forum: Beginner Basics
Topic: Quest network download limit [SOLVED]
Replies: 6
Views: 570

Re: Quest network download limit [SOLVED]

do you have fasttrack enable in firewall rules? disable it.
i prefer to make simple queues targeting the subnet than interface. like 192.168.88.0/24. if you want to limit clients in that subnet play with pcq-upload and pcq-download and set the rate you want there.
by freemannnn
Thu Aug 30, 2018 5:15 pm
Forum: Beginner Basics
Topic: Locked Out of Mikrotik
Replies: 29
Views: 3419

Re: Locked Out of Mikrotik

try mac-telnet from other connected routerboard if you can wait 1-2 hours i can go office and close all services in my main router and try to connect to it with mac-telnet from another hap lite that i have spare. what do u think? should i try? Yes please <3 sorry same result as "gnarl". shows disco...
by freemannnn
Thu Aug 30, 2018 3:45 pm
Forum: Beginner Basics
Topic: Locked Out of Mikrotik
Replies: 29
Views: 3419

Re: Locked Out of Mikrotik

try mac-telnet from other connected routerboard

if you can wait 1-2 hours i can go office and close all services in my main router and try to connect to it with mac-telnet from another hap lite that i have spare.
what do u think? should i try?
by freemannnn
Thu Aug 30, 2018 9:47 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113448

Re: v6.43rc [release candidate] is released!

just installed latest rc to test dhcp snooping and was amazed how fast winbox connects remotely to my rb at office that i upgraded.
by freemannnn
Sun Aug 26, 2018 7:18 pm
Forum: Announcements
Topic: Winbox v3.17 released!
Replies: 17
Views: 9343

Re: Winbox v3.17 released!

can u make double click to work in neighbors tab.
by freemannnn
Thu Aug 23, 2018 8:52 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113448

Re: v6.43rc [release candidate] is released!

very strange, now all the devices have the ability to change the format of the date ....
I am amazed that until now nobody has raised the problem
viewtopic.php?t=134098
by freemannnn
Sun Aug 12, 2018 6:05 pm
Forum: Beginner Basics
Topic: Dual WAN setup
Replies: 4
Views: 659

Re: Dual WAN setup

use Recursive Failover... read the folloring artile.

http://www.prinmath.com/ham/mikrotik-failover.htm
by freemannnn
Wed Aug 08, 2018 10:30 am
Forum: RouterBOARD hardware
Topic: upgrade from RB951G-2HnD
Replies: 3
Views: 510

Re: upgrade from RB951G-2HnD

have you try to upgrade to latest ROS version and firmware? maybe netinstall the device?
why dont you use another port instead of port1 ?
hap ac2 i think is what you need.
maybe rb750gr3 or RB760iGS combine with hap lite for wifi is good to go.
by freemannnn
Tue Aug 07, 2018 1:18 pm
Forum: Announcements
Topic: v6.40.8 [bugfix] is released!
Replies: 35
Views: 17176

Re: v6.40.8 [bugfix] is released!

i am curious which and when next bugfix version with "new bridge implementation" will be.....6.42.x ?
"new bridge implementation" was a big change. so going from 6.40.8 to new bugfix (>6.41.x ) dont know if it will be "a walk in the park" for some users.
by freemannnn
Mon Jul 30, 2018 2:24 pm
Forum: General
Topic: Switch suddenly reboots on its own
Replies: 2
Views: 528

Re: Switch suddenly reboots on its own

Check the power supply volt,amper.
Try another power supply.
by freemannnn
Sat Jul 28, 2018 12:08 am
Forum: General
Topic: New IP cloud is coming.
Replies: 84
Views: 27024

Re: New IP cloud is coming.

I dont care for the alternatives. I am HAPPY with ip-cloud. working from the start 100% for me.
Free dyndns per device. What more can u ask
by freemannnn
Fri Jul 27, 2018 6:31 pm
Forum: General
Topic: Router suggestion for 12 apartments sharing 1gbit [SOLVED]
Replies: 16
Views: 1312

Re: Router suggestion for 12 apartments sharing 1gbit [SOLVED]

if they start to buy their own routers then you will have to fight for DHCP ROGUE SERVERS (if you dont have vlans). thats why i moved on and ask owner to install our own hap lites in every apartment with routing setup. of course you can install RB951UI, HAP AC LITE or HAP AC2. it depends your budget...
by freemannnn
Thu Jul 26, 2018 1:30 pm
Forum: Beginner Basics
Topic: Mikrotik 750G - Limiting my connection to a max of 90MBps
Replies: 9
Views: 947

Re: Mikrotik 750G - Limiting my connection to a max of 90MBps

-upgrade firmware of 750g (system-routerboard-upgrade-reboot) - try another port as wan (ether2-ether5) ##You have to place on top of forward chain this rule to enable fasttrack! ##Warning: Queues, firewall filter and mangle rules will not be applied for FastTracked traffic. /ip firewall filter add ...
by freemannnn
Thu Jul 26, 2018 1:16 pm
Forum: General
Topic: Router suggestion for 12 apartments sharing 1gbit [SOLVED]
Replies: 16
Views: 1312

Re: Router suggestion for 12 apartments sharing 1gbit [SOLVED]

what type of connection is in every room? wired or wireless?? 1. if it is wireless why dont you setup RB1100AHx4 as CAPSMAN and set different bridge/subnet per CAP. this implies you install mikrotik ap in every room. 2. i have similar setup (with 50mbps internet line) with rb951ui-2hnd as main route...
by freemannnn
Fri Jul 20, 2018 10:38 am
Forum: RouterBOARD hardware
Topic: hAP ac lite without a beep
Replies: 4
Views: 1169

Re: hAP ac lite without a beep

it should be stated in mikrotik product pages if beeper exists or not.

It is, check the block diagram.
thank you! how i miss that!
by freemannnn
Fri Jul 20, 2018 10:19 am
Forum: RouterBOARD hardware
Topic: hAP ac lite without a beep
Replies: 4
Views: 1169

Re: hAP ac lite without a beep

beeper is a very useful option in mikrotik hardware. it should be stated in mikrotik product pages if beeper exists or not. for your information products below that i have work with does not have beeper... hap lite wap wap ac also if you search on the internet you can find the internal board of mikr...
by freemannnn
Wed Jul 18, 2018 5:22 pm
Forum: General
Topic: Limit Bandwidth to Subnet
Replies: 4
Views: 576

Re: Limit Bandwidth to Subnet

lets say your provider upload speed=1Mbps and download=10Mbps. your subnet is 192.168.1.0/24. you want every user to have 256kbps upload and 2mbps download /queue simple add disabled=no max-limit=1M/10M queue=pcq-upload-default/pcq-download-default target=192.168.1.0/24 you have to set UPLOAD/DOWNLO...
by freemannnn
Tue Jul 17, 2018 7:11 pm
Forum: Scripting
Topic: CCR1009
Replies: 3
Views: 666

Re: CCR1009

Hi
I am RB951.
Thank you
by freemannnn
Tue Jul 17, 2018 2:25 pm
Forum: Beginner Basics
Topic: Setting up hotspot on several interfaces [SOLVED]
Replies: 13
Views: 2793

Re: Setting up hotspot on several interfaces [SOLVED]

user manager is not supported in hap lite (smips). you need a more powerfull device. you can use hotspot manager instead. (ip-hotspot)
by freemannnn
Tue Jul 17, 2018 9:40 am
Forum: General
Topic: Issue with RoMON over EoIP
Replies: 18
Views: 3485

Re: Issue with RoMON over EoIP

this is the wiki i used to get it working.

https://wiki.mikrotik.com/wiki/Transpar ... using_MPLS
by freemannnn
Sun Jul 15, 2018 4:17 pm
Forum: General
Topic: question about romon
Replies: 2
Views: 397

Re: question about romon

read the above post. i use MPLS over l2tp and romon was working great...

viewtopic.php?t=105438
by freemannnn
Sat Jul 07, 2018 11:29 am
Forum: RouterBOARD hardware
Topic: New : RB760IGS - HEX-S
Replies: 38
Views: 14391

Re: New : RB760IGS - HEX-S

hex s so damn sexy. wish it has wifi. hap ac2 not sexy!!!
by freemannnn
Thu Jul 05, 2018 11:25 am
Forum: General
Topic: Feature request: better handling of context menus in Winbox
Replies: 4
Views: 469

Re: Feature request: better handling of context menus in Winbox

What they should do is to replace context menu with dialog (with listbox and items with checkboxes), where you could (de)select several columns at once. And if it would also allow to reorder them, it would be even better.
+1

selecting/deselecting multiple items it is a pain in the @ss.
by freemannnn
Thu Jul 05, 2018 10:59 am
Forum: Announcements
Topic: Winbox v3.16 released!
Replies: 63
Views: 27666

Re: Winbox v3.16 released!

@chojrak11

+1
by freemannnn
Thu Jun 28, 2018 1:42 pm
Forum: General
Topic: New IP cloud is coming.
Replies: 84
Views: 27024

Re: New IP cloud is coming.

i love ip cloud. for me is working flawless. +easy to setup. just one click to enable it. (modem=bridge mode or wan static ip address) +free. you buy even the the cheapest hap lite and its build into ros. +winbox address book. add your clients ip cloud address and you have one easy support address b...
by freemannnn
Wed Jun 20, 2018 11:38 am
Forum: Announcements
Topic: Winbox v3.15 released!
Replies: 21
Views: 7251

Re: Winbox v3.15 released!

Hi,

do you plan to develop the port knocking feature in?

best regards, Gabor
+1 for this.
by freemannnn
Thu Jun 07, 2018 9:57 am
Forum: Wireless Networking
Topic: Suggested CAPsMAN Hardware
Replies: 11
Views: 1350

Re: Suggested CAPsMAN Hardware

think also about future upgrade of your internet line or expanding your installation with more caps.
i vote also for RB1100x4. the machine is a litle beast.
by freemannnn
Fri Jun 01, 2018 6:47 pm
Forum: General
Topic: 6.42.3 Hotspot issue on CCr1009
Replies: 4
Views: 800

Re: 6.42.3 Hotspot issue on CCr1009

i have hotspot running on a CCR1009-7G-1C with 6.42.1 with no problems. have you try downgrade to 6.42.1?
thank you for posting this issue here as i am going to stay with 6.42.1 for the moment.
by freemannnn
Mon May 28, 2018 12:56 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 25357

Re: Winbox 3.14 released!

thank you for this aked by many forum members *) make up/down keys select previous/next entry in address/neighbors list in connect window while login name or password fields are in focus; *) make mouse wheel work anywere in connect window if login or password fields are in focus; and thank you for t...
by freemannnn
Sat May 26, 2018 2:01 pm
Forum: General
Topic: ATTENTION: CCR1009-7G-1C-PC micro usb port too sensitive
Replies: 2
Views: 575

Re: ATTENTION: CCR1009-7G-1C-PC micro usb port too sensitive

so i removed the extension cable that the connector side to CCR was loose and installed a micro usb straight to ccr usb port. working flawless!
by freemannnn
Sat May 26, 2018 1:43 pm
Forum: General
Topic: any reviews/comments for CRS328-24P-4S+RM or CRS112-8P-4S-IN poe switches
Replies: 9
Views: 2374

Re: any reviews/comments for CRS328-24P-4S+RM or CRS112-8P-4S-IN poe switches

i received mine and i use it mostly to power up rbwap's. installed it to customer and for the moment i am very satisfied with this purchase. temperatures are low (compare to another brand). i use routerOS.
i would like a 16 poe port version also.
so is it 1 or 2 years european warranty?
by freemannnn
Sat May 26, 2018 1:38 pm
Forum: SwOS
Topic: CRS328-24P-4S+RM Fan runs continously compared to RouterOS
Replies: 3
Views: 1250

Re: CRS328-24P-4S+RM Fan runs continously compared to RouterOS

bless youself that fan is running. i have unifi switches 16 port and fan does not start even switch shows 75c in unifi controller. i had to install external fan to keep it cool around 45-50c.
by freemannnn
Thu May 24, 2018 12:13 pm
Forum: General
Topic: any reviews/comments for CRS328-24P-4S+RM or CRS112-8P-4S-IN poe switches
Replies: 9
Views: 2374

Re: any reviews/comments for CRS328-24P-4S+RM or CRS112-8P-4S-IN poe switches

anyone already got these units? any comments about poe output and reliability?
i am having bad luck with unifi switches 16 ports.
by freemannnn
Mon May 21, 2018 7:22 pm
Forum: General
Topic: any reviews/comments for CRS328-24P-4S+RM or CRS112-8P-4S-IN poe switches
Replies: 9
Views: 2374

any reviews/comments for CRS328-24P-4S+RM or CRS112-8P-4S-IN poe switches

anybody has installed CRS328-24P-4S+RM or CRS112-8P-4S-IN new poe switches. any review or comments about them. i am asking this because they are new products with poe support and i want to be sure they are working 100% flawless. i want to power 16 and 20 rbwaps per building block. why european resel...
by freemannnn
Wed May 09, 2018 7:59 pm
Forum: General
Topic: ATTENTION: CCR1009-7G-1C-PC micro usb port too sensitive
Replies: 2
Views: 575

Re: ATTENTION: CCR1009-7G-1C-PC micro usb too sensitive

replying to my post logs does not mention anything about changing disk name or removal of disk or added a new disk. IT SHOULD. just tested it in my lab. this screenshot is after removing usb flash drive and put it back in my rb2011. i think its better to have a standard usb port than micro usb. UPDA...
by freemannnn
Wed May 09, 2018 6:56 pm
Forum: General
Topic: ATTENTION: CCR1009-7G-1C-PC micro usb port too sensitive
Replies: 2
Views: 575

ATTENTION: CCR1009-7G-1C-PC micro usb port too sensitive

i dont know if its only to my machine but the usb port of CCR1009-7G-1C-PC is very loose if you touch it. 3 times problems with ROS losing/renaming disk name and have problems with user manager. i was lucky to find it out after three failures of user manager because disk was renamed to DISK5 or DISK...
by freemannnn
Wed May 09, 2018 1:06 am
Forum: General
Topic: ccr1009 missing bad blocks and total sectors writes
Replies: 9
Views: 1197

Re: ccr1009 missing bad blocks and total sectors writes

the problem of changing the names of the usb flash drive is the usb port is so sensitive to the touch.
the usb plug on ccr is so soft that it moves so easily and after that disk drive is lost.
by freemannnn
Sun May 06, 2018 9:58 pm
Forum: The User Manager
Topic: user manager date format set to DD/MM/YYYY
Replies: 1
Views: 1256

user manager date format set to DD/MM/YYYY

can you set user manager date format to DD/MM/YYYY. if yes how?
my windows 10 machine is set to DD/MM/YYYY format.
in the photos below date format is MM/DD/YYYY
by freemannnn
Sun May 06, 2018 9:16 pm
Forum: The User Manager
Topic: UserManager Session stuck
Replies: 5
Views: 2919

Re: UserManager Session stuck

can someone explain what interim updates does?
at wiki says interim-update (time; Default: 0s)........does 0 means no update?
by freemannnn
Sat May 05, 2018 12:27 pm
Forum: General
Topic: system logging critical sent email with router identity
Replies: 5
Views: 561

Re: system logging critical sent email with router identity

you cant see that info direct in gmail inbox . you have to open email and see the header details of the message. there you can see the specific sender. so this ok than nothing.
thank you pe1chl.
by freemannnn
Sat May 05, 2018 12:09 pm
Forum: General
Topic: system logging critical sent email with router identity
Replies: 5
Views: 561

Re: system logging critical sent email with router identity

yes with filter is working but again you have to make so many filters.
is just simplier if mikrotik place "SYSTEM IDENTITY" at email that router sent.
i sent email to support@mikrotik.com
by freemannnn
Sat May 05, 2018 11:55 am
Forum: General
Topic: system logging critical sent email with router identity
Replies: 5
Views: 561

Re: system logging critical sent email with router identity

very good idea that i didnt think of, but it does not work.
the email i got in my inbox is from "mymikrotik@gmail.com" and not from "mymikrotik+AWS@gmail.com" that i have specify at sent to. do i have to you filters?
by freemannnn
Sat May 05, 2018 11:11 am
Forum: General
Topic: system logging critical sent email with router identity
Replies: 5
Views: 561

system logging critical sent email with router identity

is it possible when mikrotik sent me email about critical events to include from which mikrotik identity is coming from? i want this because i want to set one unique gmail to tools/email to all my customers. but when a mail is coming you cannot recognise which customer router it is. it would be a ni...
by freemannnn
Thu May 03, 2018 9:39 pm
Forum: General
Topic: ccr1009 missing bad blocks and total sectors writes
Replies: 9
Views: 1197

Re: ccr1009 missing bad blocks and total sectors writes

i transfer user manager this morning to usb transcend 32gb "disk4". lets see how long it will last without changing name i hope forever!
sqldb increasing day by day without adding new users.
by freemannnn
Thu May 03, 2018 5:43 pm
Forum: Wireless Networking
Topic: Best alternative to ubiquiti
Replies: 4
Views: 1077

Re: Best alternative to ubiquiti

Groove is not AC
by freemannnn
Thu May 03, 2018 4:09 pm
Forum: Wireless Networking
Topic: Best alternative to ubiquiti
Replies: 4
Views: 1077

Re: Best alternative to ubiquiti

how about WAP AC. plus compare to pico... it is dual band. 2.4 and 5ghz. it comes in 2 colors black or white dual chains. i think pico was one. cap mode. you can setup capsman and control everything from there. that is a BIG PLUS!!! https://mikrotik.com/product/RBwAPG-5HacT2HnD about picostation.......
by freemannnn
Thu May 03, 2018 8:22 am
Forum: General
Topic: ccr1009 missing bad blocks and total sectors writes
Replies: 9
Views: 1197

Re: ccr1009 missing bad blocks and total sectors writes

i am using MikroTik CCR1009-7G-1C-PC so no sdcard in this model. i got a reply from mikrotik support... "CCR (tile architecture) devices does not provide such information." i bought another usb flash drive TRANSCEND 32gb. i will give try one more time with user manager in usb flash drive and if happ...
by freemannnn
Wed May 02, 2018 6:40 pm
Forum: General
Topic: ccr1009 missing bad blocks and total sectors writes
Replies: 9
Views: 1197

Re: ccr1009 missing bad blocks and total sectors writes

i dont trust anymore external usb flash drivers for user manager. disk is missing from system/disks or changing name from disk1 to disk4 without reason. and nobody can login after that because user manager database cannot be found. internal flash is small 128mb but user manager is working flawless u...
by freemannnn
Wed May 02, 2018 12:48 pm
Forum: General
Topic: ccr1009 missing bad blocks and total sectors writes
Replies: 9
Views: 1197

Re: ccr1009 missing bad blocks and total sectors writes

this photo is from another rb951 router
by freemannnn
Wed May 02, 2018 12:47 pm
Forum: General
Topic: ccr1009 missing bad blocks and total sectors writes
Replies: 9
Views: 1197

ccr1009 missing bad blocks and total sectors writes

why there is no info about bad block and total sectors writes in ccr1009?
i want to use internal flash 128mb for user manager but i dont know if it will wear quick by many read/writes.
by freemannnn
Tue May 01, 2018 3:47 pm
Forum: The User Manager
Topic: user manager usb disk not found
Replies: 7
Views: 1503

user manager usb disk not found

i am using user manager 6.42.1 for a new hotspot and every some days i found out that users cannot login because the ccr1009 cannot find the usb disk starage where the user manager database exists. its a usb flashdrive 4gb. i dont have any power outage because ccr is on ups. i have to restart many t...
by freemannnn
Sun Apr 29, 2018 4:47 pm
Forum: General
Topic: ip in hotspot and arp but not in dhcp leases
Replies: 0
Views: 236

ip in hotspot and arp but not in dhcp leases

this is the second day i run a a new paid hotspot on mikrotik ccr1009 with 6.42.1 at a new customer so i keep a close eye to check it is working flawless. one strange thing i notice today is someone is downloading using a paid voucher from user manager "R" but i cannot see his ip in dhcp leases. as ...
by freemannnn
Mon Apr 23, 2018 11:36 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 161593

Re: Advisory: Vulnerability exploiting the Winbox port

still waiting for the bugfix only update
Same here.
Me too
by freemannnn
Sun Apr 15, 2018 12:25 am
Forum: General
Topic: romon behind unifi switches no discovery
Replies: 2
Views: 363

Re: romon behind unifi switches no discovery

thanx. this is bad news.
by freemannnn
Sat Apr 14, 2018 6:26 pm
Forum: Wireless Networking
Topic: Caps-Man Local Forwarding or Not?
Replies: 5
Views: 1899

Re: Caps-Man Local Forwarding or Not?

about local forwarding you have to login to every cap and make sure in bridge there is ether1. when you enable cap it automatics add wlan1 and wlan2 (if exists). of course at capsman you have to set at datapath "local forwarding" yes you are right. i made a btest with a ccr1009 and a rbwap ac and i ...
by freemannnn
Fri Apr 13, 2018 11:04 pm
Forum: General
Topic: romon behind unifi switches no discovery
Replies: 2
Views: 363

romon behind unifi switches no discovery

any idea why romon devices are not discovered behind unifi switches?
by freemannnn
Fri Apr 13, 2018 3:42 pm
Forum: Beginner Basics
Topic: Bandwidth Test Limited to 100Mb
Replies: 1
Views: 314

Re: Bandwidth Test Limited to 100Mb

RB2011UiAS has 5 gigabit ports and 5 100 ports
1,2,3,4,5 = 1000
6,7,8,9,10 = 100
by freemannnn
Wed Apr 11, 2018 9:27 pm
Forum: General
Topic: queue priorities/limit-at questions
Replies: 2
Views: 408

Re: queue priorities/limit-at questions

ok i understand. thank you.
for others information if you set limit-at "unlimited" then the max-limit of parent applies.
by freemannnn
Wed Apr 11, 2018 6:38 pm
Forum: General
Topic: queue priorities/limit-at questions
Replies: 2
Views: 408

queue priorities/limit-at questions

my provider is 5mbps/50mbps i set a "lan" parent queue with max limits 2M/30M first child queue "server" with max 2M/20M and limit-at 1M/20M second child queue "other" with max 2M/20M and limit-at 1M/20M shouldnt total maximum download speed be 30M as parent queue says! why is 40M download speed? i ...
by freemannnn
Wed Apr 11, 2018 12:37 pm
Forum: Announcements
Topic: Winbox 3.13 released!
Replies: 61
Views: 21829

Re: Winbox 3.13 released!

strods please also...

fix winbox to save columns width in romon neighbours and neighbours tab.
i have to resize them everytime i connect to a romon device.

take a look at image

https://www.dropbox.com/s/ujui1slax3uqk ... e.JPG?dl=0
by freemannnn
Wed Apr 11, 2018 12:26 pm
Forum: Announcements
Topic: Winbox 3.13 released!
Replies: 61
Views: 21829

Re: Winbox 3.13 released!

Chupaka - As mentioned before - "Focus goes to connect form for purpose". As for scrolling with the mouse/trackpad within managed routers list - we can not reproduce such problem locally. it would be nice if someone from support would like to connect with teamviewer or anydesk to my windows 7 pc or...
by freemannnn
Wed Apr 11, 2018 11:59 am
Forum: Announcements
Topic: Winbox 3.13 released!
Replies: 61
Views: 21829

Re: Winbox 3.13 released!

i have a support ticket about this... Ticket#2018020922004376 please fix winbox to save tab positions in romon neighbours and neighbours. > *i have to resize them everytime i connect to a romon device.* > > also scrolling up-down with mouse wheel when many addresses saveed is not > impossible in 6.1...
by freemannnn
Tue Apr 10, 2018 10:49 pm
Forum: Announcements
Topic: Winbox 3.13 released!
Replies: 61
Views: 21829

Re: Winbox 3.13 released!

same for me. focus jump to password field. mikrotik please fix it.
by freemannnn
Mon Apr 09, 2018 7:43 pm
Forum: The User Manager
Topic: Mikrotik router board as external user manager
Replies: 5
Views: 1248

Re: Mikrotik router board as external user manager

better look for RB1100AHx4. there is ssd inside so you can store your user manager there.
RB1100AHx2 is an old model but of course it also works great.
by freemannnn
Fri Mar 30, 2018 12:04 am
Forum: The User Manager
Topic: usermanager generating batch of users ....only numbers
Replies: 5
Views: 3878

Re: usermanager generating batch of users ....only numbers

a very old topic but it would be nice if user manager generates vouchers with only numbers.
by freemannnn
Wed Mar 21, 2018 11:07 am
Forum: Beginner Basics
Topic: Isolating physical LAN interfaces
Replies: 10
Views: 2310

Re: Isolating physical LAN interfaces

In another post i read about ip/settings option ip-forward that isolates different interfaces. I test it in my router and i could not surf the web. If someone can post some info of how we use it. Also there is bridge horizon value in every bridge (if you use bridges). If you have same horizon number...
by freemannnn
Mon Mar 12, 2018 7:31 pm
Forum: General
Topic: 2011UiAS-2HnD Wifi and stability issues
Replies: 8
Views: 935

Re: 2011UiAS-2HnD Wifi and stability issues

I have seen this behaviour in hap lite also.
Dont know why happens. If you have to disable chains means the device is defective?
What is CHAINS exactly?
by freemannnn
Mon Mar 05, 2018 9:02 pm
Forum: General
Topic: Reset Config Run after Reset not working right
Replies: 10
Views: 2202

Re: Reset Config Run after Reset not working right

that is the explanation from mikrotik... "Startup delay" If your configuration relies on interfaces that might not yet have started up upon command execution, it is suggested to introduce delays, or to monitor until all needed interfaces are available. This example script allows you to set how many ...
by freemannnn
Mon Mar 05, 2018 8:39 pm
Forum: General
Topic: Reset Config Run after Reset not working right
Replies: 10
Views: 2202

Re: Reset Config Run after Reset not working right

read this topic

viewtopic.php?t=123656

add 15 seconds delay at the begining of the script.
:delay 15s
by freemannnn
Sun Mar 04, 2018 12:12 am
Forum: Scripting
Topic: Problem while changing pppoe-client comment
Replies: 4
Views: 581

Re: Problem while changing pppoe-client comment

Indeed its happening i have seen that many times. I wonder also why. Comment is not a setting!
by freemannnn
Fri Mar 02, 2018 7:27 pm
Forum: General
Topic: 2011UiAS-2HnD Wifi and stability issues
Replies: 8
Views: 935

Re: 2011UiAS-2HnD Wifi and stability issues

Can you test wifi with wireless chains 0 only selected. It is in wireless HT tab.
by freemannnn
Thu Feb 22, 2018 10:02 pm
Forum: General
Topic: VLAN in new "Bridge Only" config
Replies: 64
Views: 17480

Re: VLAN in new "Bridge Only" config

"except that by setting "vlan-filtering=yes", you break the hardware offloading."

thank you for pointing out this. i didnt think of that.
by freemannnn
Wed Feb 21, 2018 4:10 pm
Forum: General
Topic: Bandwidth limiting - working limit-at
Replies: 7
Views: 3358

Re: Bandwidth limiting - working limit-at

My rb2011 is maxing cpu at around 50mbps download with pcc rules (dual wAn 2* 50mbps vdsl), pcq queues and capsman forwarding for 40 caps!
So propably cpu is your problem.
Please if you test with a better mikrotik router like hex rb750gr3 or ccr show us your results
by freemannnn
Tue Feb 20, 2018 8:47 pm
Forum: Wireless Networking
Topic: Caps-Man Local Forwarding or Not?
Replies: 5
Views: 1899

Re: Caps-Man Local Forwarding or Not?

i prefer capsman forward because i can observe at capsman what upload/download speed every cap is having!
by freemannnn
Sun Feb 18, 2018 2:30 pm
Forum: General
Topic: 6.41rc66 Bridge VLAN Filtering and CAPs with VLAN tags.
Replies: 4
Views: 1249

Re: 6.41rc66 Bridge VLAN Filtering and CAPs with VLAN tags.

did u find a sollution to that?
by freemannnn
Wed Feb 14, 2018 4:15 pm
Forum: General
Topic: List of devices with beeper
Replies: 2
Views: 390

Re: List of devices with beeper

i wanted to say this also. that in mikrotik product specification page there should be a field with "beeper=YES " or "beeper-NO"
its very useful also for me the beeper function as i can detect in dozens of ap which one it is!
sad that rbwaps does not have beeper!
by freemannnn
Sat Feb 10, 2018 9:25 pm
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43907

Re: Winbox 3.12 released!

Winbox moves focus to password field after clicking on one of the managed routers.
by freemannnn
Fri Feb 09, 2018 3:37 pm
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43907

Re: Winbox 3.12 released!

i cant show it with video. please open winbox with many saved adresses. i have 48 items in my address book. mark one and try to scroll up-down with the mouse wheel. it does not. with 3.11 was possible.
by freemannnn
Tue Feb 06, 2018 11:21 pm
Forum: The User Manager
Topic: create hotspot users using hotel management software data
Replies: 10
Views: 5610

Re: create hotspot users using hotel management software data

Why create/print individual usernames/pass for every customer and not just create ONE username/password for all customers? (shared users must be set to something like 200) Another one. Create permanent username/password for every room like... Room 100 = User:36406 pass:13546 Room 101 = user:62494 pa...
by freemannnn
Tue Feb 06, 2018 11:54 am
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43907

Re: Winbox 3.12 released!

Winbox 3.12 (on win10) doesn't scroll between saved items after selecting one of them, it seems the focus is elsewhere. After touching the vertical bar, scrolling works again. It's only me? Please confirm. same for me. mouse wheel does not work to scroll up-down saved items. please fix also winbox ...
by freemannnn
Mon Feb 05, 2018 11:47 pm
Forum: General
Topic: sent commands to caps from capsman
Replies: 3
Views: 300

Re: sent commands to caps from capsman

ok thanx for the suggestion.
the thing is i prefer winbox (so small in a usb stick and no install needed) to connect remotely to customers when i am away from office . bottom line more commands instead of only provision,upgrade,set identity would be usefull.
by freemannnn
Mon Feb 05, 2018 8:22 pm
Forum: General
Topic: sent commands to caps from capsman
Replies: 3
Views: 300

sent commands to caps from capsman

it would be nice in winbox-capsman to sent commands to caps with right click like "reboot", "beep", 'mac telnet" etc
have to go to neighbours to mac telnet is double the way!
and maybe sent commands to multi caps with one click.
by freemannnn
Mon Feb 05, 2018 1:02 pm
Forum: Beginner Basics
Topic: Hotspot Status Page not Popup
Replies: 3
Views: 1464

Re: Hotspot Status Page not Popup

maybe popup blocker blocks the window to appear.
you can manual open it by typing the ip address of hotspot. like 10.5.50.1
by freemannnn
Sun Feb 04, 2018 6:24 pm
Forum: Announcements
Topic: v6.41.1 [current]
Replies: 106
Views: 15549

Re: v6.41.1 [current]

at hotspot with user manager (profile with 2 shared users) when i reboot the router after devices can not automatic login with mac-cookie. at log it says "login failed simultaneous session limit reached" and hotspot login page appears.

ps why i cannot attach a picture? where is the option?
by freemannnn
Sat Feb 03, 2018 4:38 pm
Forum: General
Topic: Mikrotik stories: my mikrotik bed
Replies: 3
Views: 522

Re: Mikrotik stories: my mikrotik bed

I am in love too.
I miss the speaker function and neighbour discovery to be on by default.
by freemannnn
Sat Feb 03, 2018 12:14 am
Forum: General
Topic: Mikrotik stories: my mikrotik bed
Replies: 3
Views: 522

Mikrotik stories: my mikrotik bed

should i sleep or not?
propably not. have to make them caps all night long.
on top of the bed more rbwap are missing because they have been installed!
by freemannnn
Wed Jan 31, 2018 10:21 am
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 65
Views: 17085

Re: MikroTik News February 2018 (Issue #80)

waiting for that 16 ports poe switch!
by freemannnn
Thu Jan 25, 2018 3:43 pm
Forum: General
Topic: PCQ not working
Replies: 2
Views: 434

Re: PCQ not working

first check in firewall-filter that FASTTRACK rule is disabled.
if still not working....
in bridge-settings enable USE IP FIREWALL
by freemannnn
Thu Jan 25, 2018 2:43 pm
Forum: General
Topic: Forum notifications!
Replies: 8
Views: 765

Re: Forum notifications!

i need notifications to post that important to me to read the answers.
by freemannnn
Tue Jan 23, 2018 3:12 pm
Forum: General
Topic: Firewall filter after update blocks my l2tp [SOLVED]
Replies: 8
Views: 1666

Re: Firewall filter after update blocks my l2tp [SOLVED]

same ruled appear in my router when i reset it with default configuration (6.41).
add your internet connection and l2tp to /interface list for easiest management of your wan connections.

https://wiki.mikrotik.com/wiki/Manual:Interface/List
by freemannnn
Tue Jan 23, 2018 12:19 pm
Forum: Beginner Basics
Topic: Bandwidth limit with exception
Replies: 4
Views: 719

Re: Bandwidth limit with exception

remove dst=195.xxx.xxx.xxx/32 and dst=79.xxx.xxx.xxx/32 and test.
maybe your dst addresses are not correct.
by freemannnn
Sun Jan 21, 2018 5:04 pm
Forum: Wireless Networking
Topic: Mikrotik hAP ac lite or RB951Ui-2HnD for In room Wifi Solutions
Replies: 3
Views: 1884

Re: Mikrotik hAP ac lite or RB951Ui-2HnD for In room Wifi Solutions

I have install several times rbwap and rb951 to hotels. both working great.
by freemannnn
Sun Jan 21, 2018 5:00 pm
Forum: Wireless Networking
Topic: Capsman reduce the output power of caps
Replies: 1
Views: 1143

Capsman reduce the output power of caps

How we do it?
By increasing antenna gain? If yes before make it cap? One by one?
It will be a nice feature in capsman to have something like low-medium-high to set to caps.
by freemannnn
Fri Jan 19, 2018 12:27 pm
Forum: General
Topic: why winbox cannot detect rbwap
Replies: 7
Views: 685

Re: why winbox cannot detect rbwap

Not nice blaming manufacturer for your missing switches, you are doing installation from the other end. If this is the case, you will have to live with Flashfig or something like that, to preconfigure. The wAP is configured as an Access Point out of the box, the LAN port is firewalled. Why disable ...
by freemannnn
Fri Jan 19, 2018 12:25 pm
Forum: General
Topic: why winbox cannot detect rbwap
Replies: 7
Views: 685

Re: why winbox cannot detect rbwap

Why can't you install them in rooms first, and when plug into the ethernet (with power), hold the button to become cAP. This is much easier and no need to pre-configure anything. because the cables are not ready yet and there are no poe switches yet going back to main CCR. so there is no point pres...
by freemannnn
Fri Jan 19, 2018 11:26 am
Forum: General
Topic: watching my rb2011 temp increasing to 90c
Replies: 1
Views: 276

Re: watching my rb2011 temp increasing to 90c

happened third time. pluging/unpluging lan cable to ether 10 (setting up rbwaps to cap mode) crash the port. dont know why. i sent supout.
by freemannnn
Thu Jan 18, 2018 7:49 pm
Forum: General
Topic: why winbox cannot detect rbwap
Replies: 7
Views: 685

Re: why winbox cannot detect rbwap

Out of the box discovery is off on Ethernet interface. You can connect and discover if you connect to the wireless. why is off when in all other products discovery its ON by default.? this is double time for me to setup now. i have to turn on all of them one by one with button pressed to make them ...
by freemannnn
Thu Jan 18, 2018 7:36 pm
Forum: General
Topic: watching my rb2011 temp increasing to 90c
Replies: 1
Views: 276

watching my rb2011 temp increasing to 90c

this is the second time happening after upgrading to 6.41. (if its related). never happened before and i have this model (2011UAS-2HnD) 4 years. i am setting up rbwaps to caps mode in ether10. after some in/outs of lan cable, ether10 is crashed, no led turned on, no connection to rbwap, and the temp...
by freemannnn
Thu Jan 18, 2018 5:55 pm
Forum: General
Topic: why winbox cannot detect rbwap
Replies: 7
Views: 685

why winbox cannot detect rbwap

i have 80 pieces to install on the walls of room hotel without power initialiy. i just unbox one to test in my lab and i find out i cannot detect it in winbox or neighbours. i was thinking that when i power up all of them after 1 month i could detect-connect with winbox one by one and setup them as ...
by freemannnn
Mon Jan 15, 2018 10:40 am
Forum: The User Manager
Topic: Locked iPhone means no notifications - MT Hotspot [SOLVED]
Replies: 7
Views: 1457

Re: Locked iPhone means no notifications - MT Hotspot [SOLVED]

ok thanx for the update.
BEWARE. for iphone users 'reset network settings' deletes all WIFI PASSWORDS that are saved in the phone.
by freemannnn
Sat Jan 13, 2018 1:38 pm
Forum: Announcements
Topic: Securing your device is important
Replies: 32
Views: 11329

Re: Securing your device is important

If you are familiar with mikrotik ros its a matter of 5-10 mins to secure your router with the above recomendations. Nice guide thanx
by freemannnn
Fri Jan 12, 2018 10:36 pm
Forum: Beginner Basics
Topic: Bandwidth limit with exception
Replies: 4
Views: 719

Re: Bandwidth limit with exception

Make a new simple queue set as dst the server ip with unlimited upload/download and place it over the one you already got.

Another sollution is fasttrack the ip address of server
by freemannnn
Fri Jan 12, 2018 3:27 pm
Forum: RouterBOARD hardware
Topic: Looking for hardware
Replies: 1
Views: 361

Re: Looking for hardware

For the second question WAP AC is not ok for you?

https://mikrotik.com/product/RBwAPG-5HacT2HnD
by freemannnn
Thu Jan 11, 2018 12:12 am
Forum: General
Topic: Today all my customers router attacked once!
Replies: 1
Views: 352

Today all my customers router attacked once!

Got this email from 22 rb routers. Same attacker ip. Attacked once per router. Propably searching for blank password.

"system,error,critical login failure for user admin from 81.177.231.210 via winbox"

Of course my routers are password protected and unused services disabled (ip-services)
by freemannnn
Wed Jan 10, 2018 3:39 pm
Forum: RouterBOARD hardware
Topic: New POE hardware for IP Cameras and IP Phones
Replies: 5
Views: 790

Re: New POE hardware for IP Cameras and IP Phones

I want it also. Otherwise i have to go to unifi switch.
I have a deadline of three months to wait.
by freemannnn
Thu Dec 28, 2017 2:53 pm
Forum: General
Topic: Issue with RoMON over EoIP
Replies: 18
Views: 3485

Re: Issue with RoMON over EoIP

i had MPLS package disabled. thats why i couldn't find it.
ok i setup VPLS over L2TP (without EoIP) and romon is working great. thanx!
by freemannnn
Thu Dec 28, 2017 9:28 am
Forum: General
Topic: Issue with RoMON over EoIP
Replies: 18
Views: 3485

Re: Issue with RoMON over EoIP

Has anybody come up with a workaround to use RoMON over EoIP ? I´ve made a secondary VPLS over the L2TP server binding that I´m running the EoIP over - then RoMON works flawlesly. Even with the remote router behind 2 time isp nat. Don´t know if this is the solution in all cases, but works here :-) ...
by freemannnn
Wed Dec 27, 2017 11:14 pm
Forum: General
Topic: Issue with RoMON over EoIP
Replies: 18
Views: 3485

Re: Issue with RoMON over EoIP

Has anybody come up with a workaround to use RoMON over EoIP ?
by freemannnn
Wed Dec 27, 2017 3:09 pm
Forum: Beginner Basics
Topic: RB951G-2HnD - speed limit 280 Mbps
Replies: 3
Views: 1350

Re: RB951G-2HnD - speed limit 280 Mbps

did u turn on fasttrack at your rb951? rb750gr3 is a nice price router but it does not have wifi. i read in the forum that is very powerfull. of course you can add an extra ap. (like wap ac) https://mikrotik.com/product/RB750Gr3 also RB3011UiAS-RM RB1100AHx4 https://mikrotik.com/products/group/ethe...
by freemannnn
Fri Dec 22, 2017 8:08 pm
Forum: The User Manager
Topic: user manager cannot utilize the available cpu core
Replies: 7
Views: 1002

Re: user manager cannot utilize the available cpu core

there are many videos in youtube how to create an account in AWS. you need a credit card for free tier for one year.
after theaccount creation, you create an EC2 instance from MIKROTIK CHR "AMI"
take a look at videos its very easy
by freemannnn
Fri Dec 22, 2017 5:45 pm
Forum: The User Manager
Topic: user manager cannot utilize the available cpu core
Replies: 7
Views: 1002

Re: user manager cannot utilize the available cpu core

yes amazon web services.
also creating users (user manager) in aws is really fast than an external usb in my ccr1009
by freemannnn
Fri Dec 22, 2017 3:11 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 77927

Re: v6.41 [current]

oh my god. and i was thinking what i am gonna do in christmas (4 days holidays). testing testing testing
nice!
by freemannnn
Fri Dec 22, 2017 10:27 am
Forum: RouterBOARD hardware
Topic: CCR1072 - M.2 SSD compatibility
Replies: 14
Views: 3117

Re: CCR1072 - M.2 SSD compatibility

normis do you find it more reliable to run user manager in AWS CHR (licence level free ) and make a tunnel for radius requests? or better local at a usb flash drive?
i want to be sure that there are no power outages that can corrupt user manager database .
by freemannnn
Thu Dec 21, 2017 9:12 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123693

Re: v6.41rc [release candidate] is released! New bridge implementation!

Looks like demo Routerboards find final version 6.41... Is the release being prepare right now?

lol i didnt know this site all these years. thanx.
6.41...christmas present. if yes...nice
by freemannnn
Tue Dec 19, 2017 2:18 pm
Forum: The User Manager
Topic: user manager cannot utilize the available cpu core
Replies: 7
Views: 1002

Re: user manager cannot utilize the available cpu core

do you think you can setup usermanager in AWS? i have done it with AWS free tier and mikrotik CHR.
i have setup my router to look up radius in AWS CHR. i am doing this now for testing purposes but later i will install it for a hotel.
make a free AWS account, test and see.
by freemannnn
Mon Dec 18, 2017 3:06 pm
Forum: General
Topic: poe power to 16 rbwap2nd
Replies: 3
Views: 445

Re: poe power to 16 rbwap2nd

like unifi switch 16 ports 150w (Model: US‑16‑150W) ?
by freemannnn
Fri Dec 15, 2017 9:46 pm
Forum: General
Topic: poe power to 16 rbwap2nd
Replies: 3
Views: 445

Re: poe power to 16 rbwap2nd

someone suggest me this product that is current no avalaible. CRS328-24P-4S+RM. yes this is what i want. but when will be available? price?
if i dont find a sollution soon to power up these 80 rbwap with poe switch or injector i will have to go for unifi switch with unifi uap.
by freemannnn
Fri Dec 15, 2017 9:05 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

Re: is RB1100AHx2 production going to stop?

Right tunnel. From aws chr to my static rb
by freemannnn
Fri Dec 15, 2017 8:25 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

is RB1100AHx2 production going to stop?

And of course i need a static ip for chr at aws. Elastic ip is called if i am not mistaken
by freemannnn
Fri Dec 15, 2017 8:15 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

is RB1100AHx2 production going to stop?

So user manager sessions is unlimited at CHR. That is good news. I can buy a 750gr3 and have user manager at aws. I already test that in my lab and it works good. I prefer the user manager at AWS as stability and never power outage. Only thing i didnt know was the unlimited UM sessions. Thanx jarda
by freemannnn
Fri Dec 15, 2017 8:07 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

Re: is RB1100AHx2 production going to stop?

Please read carefully what i write. I want USER MANAGER not hotspot users. I want to sell vouchers to hotel customers
by freemannnn
Fri Dec 15, 2017 8:02 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

is RB1100AHx2 production going to stop?

Jarda i already think about that and I have install a chr at aws free tier. I want the user manager at L6. what should i do? What licence should i buy for CHR L6?
Is the already installed CHR unlimited user manager sessions? And only speed limited.
by freemannnn
Fri Dec 15, 2017 5:57 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

is RB1100AHx2 production going to stop?

my speed is 30mbps/30mbps up/down. i said about rb1100ahx2 because it is the first L6 model.
buying just a L6 licence is 250$ . so why not to buy rb1100ahx2 for 300$.
by freemannnn
Fri Dec 15, 2017 2:44 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

Re: is RB1100AHx2 production going to stop?

but i want user manager for paid hotspot.
by freemannnn
Fri Dec 15, 2017 2:19 pm
Forum: General
Topic: poe power to 16 rbwap2nd
Replies: 3
Views: 445

poe power to 16 rbwap2nd

how can i power up 16 rbwap2nd? (4 buildings total each building will have 16 rbwap2nd) i dont want to use included poe because it will be a mess. mikrotik switch CRS125-24G-1S-IN that i will use to connect rbwap2nd does not have poe out ports. the power adapter for each rbwap2nd is 24V 0.2A. so how...
by freemannnn
Fri Dec 15, 2017 10:47 am
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

Re: is RB1100AHx2 production going to stop?

and more expensive. CCR1009-7G-1C-PC starts at 425$
i think rb1100ahx2 was around 300$
by freemannnn
Thu Dec 14, 2017 9:43 pm
Forum: RouterBOARD hardware
Topic: is RB1100AHx2 production going to stop?
Replies: 16
Views: 1590

is RB1100AHx2 production going to stop?

i dont see it in list of products at mikrotik.com https://mikrotik.com/products/group/ethernet-routers but its product page exist https://mikrotik.com/product/RB1100AHx2 i want a L6 user manager router for a hotel hotspot. so what is after rb1100ahx2 ? i would like the 1100ahx4 (with ssd) but user m...
by freemannnn
Sun Dec 10, 2017 6:22 pm
Forum: General
Topic: CHR User-manager connection limit
Replies: 5
Views: 1171

Re: CHR User-manager connection limit

i just installed a mikrotik CHR instance at AWS (free tier) and at system licence it says FREE. so what licence level is this? how many user manager active sessions can be active? i am testing this in my lab running remote user manager (aws) and is working good. i am between choosing rb1100 or AWS C...
by freemannnn
Fri Dec 08, 2017 3:58 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154927

Re: RouterOS v7.0 beta1 - when?

that reminds me of apple with IOS11. full of bugs for new features that some care and some dont care. i prefer an IOS10 shiny than a shitty IOS11. fortunately i stayed at 10.3.3 on my iphone. and not to forget IOS11 removed showing mac address of devices in usefull aplications like FING, NET ANALYZER.
by freemannnn
Thu Dec 07, 2017 6:49 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123693

Re: v6.41rc [release candidate] is released! New bridge implementation!

my dns server (ip-dns) where lost after upgrade to rc61
by freemannnn
Wed Dec 06, 2017 12:42 am
Forum: General
Topic: Replacement for 1100AHx2
Replies: 5
Views: 538

Re: Replacement for 1100AHx2

And if we need user manager l6 what is the next good option after rb1100ahx2 ?
by freemannnn
Wed Dec 06, 2017 12:41 am
Forum: General
Topic: Replacement for 1100AHx2
Replies: 5
Views: 538

Re: Replacement for 1100AHx2

And if we need user manager l6 what is the next good option after rb1100ahx2 ?
by freemannnn
Mon Dec 04, 2017 11:25 am
Forum: RouterBOARD hardware
Topic: Why people pair UBNT APs with MikroTik routers?
Replies: 55
Views: 29898

Re: Why people pair UBNT APs with MikroTik routers?

when it comes to installations without poe switch i prefer MT products for the poe cable that is included. with ubnt you need small extra lan cables 0.5m to connect their psu.
by freemannnn
Fri Dec 01, 2017 9:04 pm
Forum: General
Topic: RB2011UiAS-2HnD-IN routing performance
Replies: 7
Views: 953

Re: RB2011UiAS-2HnD-IN routing performance

you mean 650mhz?
you mean maybe it will be breaked and no netinstall can fix it?
by freemannnn
Tue Nov 28, 2017 12:22 pm
Forum: Announcements
Topic: Winbox 3.11 released!
Replies: 94
Views: 285722

Re: Winbox 3.11 released!

can you make right click "copy" able in tools ip scan. i want to copy mac addresses and i have to do it by hand one by one.
by freemannnn
Sat Nov 25, 2017 1:55 pm
Forum: General
Topic: RBGPOE led blinking
Replies: 1
Views: 280

RBGPOE led blinking

Went to customer site and cable is propably cutted somewhere. Only pins 4,5 was ok with cable tester.


Sent from my iPhone using Tapatalk
by freemannnn
Sat Nov 25, 2017 10:25 am
Forum: Beginner Basics
Topic: don't understand Vlan tagging 100%
Replies: 8
Views: 957

don't understand Vlan tagging 100%

Sorry i said it wrong in my previous post. 1. if vlan100,vlan200 is attached to bridge1 (ether1,ether2 is member of bridge1). both ether1 and ether2 become trunk ports. 2. if vlan300 is attached to bridge2 (ether3 is member of bridge2). ether3 is an access port. two vlan (100,200) and more makes the...
by freemannnn
Fri Nov 24, 2017 9:44 pm
Forum: Beginner Basics
Topic: don't understand Vlan tagging 100%
Replies: 8
Views: 957

Re: don't understand Vlan tagging 100%

nice explanation. thank u. i am playing also with vlan at my lab at this moment (6.40.5), and questions like this was in my mind. questions. ... 1. if vlan100 is attached to bridge1 (ether1,ether2 is member of bridge1). both ether1 and ether2 become trunk ports? 2. if vlan200 is attached to bridge2 ...
by freemannnn
Fri Nov 24, 2017 8:39 pm
Forum: General
Topic: RBGPOE led blinking
Replies: 1
Views: 280

RBGPOE led blinking

what means blinking led in RBGPOE when i connect a lan cable (50m installed in a customer) with no device at the other end? short-circuited?
the specific poe works well with another lan cable.
by freemannnn
Thu Nov 23, 2017 8:24 pm
Forum: General
Topic: PCC load balancing 2x100Mbps connections
Replies: 5
Views: 1551

Re: PCC load balancing 2x100Mbps connections

try with "both addresses and ports" in pcc rules. but this will break https sites.
me always using "both addresses" only.
by freemannnn
Tue Nov 21, 2017 6:28 pm
Forum: The User Manager
Topic: user manager rb1100hx2 vs vmware
Replies: 2
Views: 656

Re: user manager rb1100hx2 vs vmware

Side note: never use internal flash storage of a device as working disk for dude or user manager database or for logging. You will wear it soon and device will start to make errors.
thanx for the tip jarda.
propably i will go for RB1100AHx2 as RB1100AHx4 does not support user manager.
by freemannnn
Mon Nov 20, 2017 6:54 pm
Forum: The User Manager
Topic: user manager rb1100hx2 vs vmware
Replies: 2
Views: 656

user manager rb1100hx2 vs vmware

i have 2 installations with user manager at rb951ui-2hnd and rb1100hx2. the problem rarely is that database is getting corrupted and users cannot access internet. i dont know if its power outage or something else. also small storage size 128mb. i know i can use a usb flash drive or an sd card. i wil...
by freemannnn
Fri Nov 10, 2017 9:35 am
Forum: General
Topic: hap lite classic "mode" button?
Replies: 18
Views: 5823

hap lite classic "mode" button?

anyone notice that newer haps have this "mode" button? could not find any info anywhere.
what is does? maybe wps? cap?
by freemannnn
Fri Oct 13, 2017 3:27 pm
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

Re: internet sharing for block of 10 flats [SOLVED]

ok i will go with different SSID but same wpa2 password. speed is equally shared through main router (pcq-upload rate=300k/pcq-download rate=3M).

like...
SSID...WPA2
flat1...12345678
flat2...12345678
flat3...12345678
by freemannnn
Fri Oct 13, 2017 8:36 am
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

Re: internet sharing for block of 10 flats [SOLVED]

any suggestion of using same SSID/WPA2 for the 10 flats? or different per flat?
i believe for the owner of flats will be easier to have one password to give to the 10 renters.
but roaming in different subnets is a problem?
by freemannnn
Thu Oct 12, 2017 9:34 pm
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

Re: internet sharing for block of 10 flats [SOLVED]

paternot thank u very much for the suggestion. i think i found it. i have internet in laptop now. in hap lite ip-dns should i enable in "allow remote requests"? should i place google dns servers in the same tab? Depends upon your configuration. Your PPPoE server tells the client wich DNS use. You c...
by freemannnn
Thu Oct 12, 2017 5:43 pm
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

Re: internet sharing for block of 10 flats [SOLVED]

paternot thank u very much for the suggestion. i think i found it. i have internet in laptop now. in hap lite ip-dns should i enable in "allow remote requests"? should i place google dns servers in the same tab? why double nat is problem for simple users just surfing google,facebook,youtube etc? no...
by freemannnn
Thu Oct 12, 2017 5:09 pm
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

Re: internet sharing for block of 10 flats [SOLVED]

i try this on my lab now.
i miss something on my main router (static route????). hap lite has internet but toshiba laptop connected on hap does not have internet.
is the static route on my main router correct?
by freemannnn
Thu Oct 12, 2017 4:12 pm
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

internet sharing for block of 10 flats [SOLVED]

You mean bridge ether1,2,3,4 and wlan in hap lite? Use it as simple ap?


Sent from my iPhone using Tapatalk
by freemannnn
Thu Oct 12, 2017 3:30 pm
Forum: General
Topic: internet sharing for block of 10 flats [SOLVED]
Replies: 10
Views: 1151

internet sharing for block of 10 flats [SOLVED]

renters in flats had wire internet access. but most of them want now wireless so without asking they buy or had routers instead of access point, connect them to lan cable on wall in their flat and after nobody had internet because of rogue dhcp server. my sollution is. i have order 10 hap lite to in...
by freemannnn
Mon Oct 09, 2017 10:43 am
Forum: General
Topic: Regular reboot for no known reason
Replies: 3
Views: 474

Re: Regular reboot for no known reason

spi = serial peripheral interface OR stateful packet inspection, someone clarify it please!

also...
check you dont have 53 dns port open to the world.
viewtopic.php?t=69677

check your power supply
netinstall firmware
by freemannnn
Wed Sep 27, 2017 5:00 pm
Forum: General
Topic: Why I am not using WinBox!
Replies: 24
Views: 2579

Re: Why I am not using WinBox!

me too. i cant work without winbox.
by freemannnn
Thu Sep 21, 2017 11:17 pm
Forum: General
Topic: Winbox keeps disconnecting when accessing through the WAN
Replies: 4
Views: 1577

Re: Winbox keeps disconnecting when accessing through the WAN

i think i had same problem and i adjust MTU/MRU value of connection.
by freemannnn
Sat Sep 16, 2017 10:51 pm
Forum: Beginner Basics
Topic: ip firewall diagram
Replies: 3
Views: 680

Re: ip firewall diagram

thanx for sharing. much simple and understandable
by freemannnn
Fri Sep 15, 2017 2:16 pm
Forum: Beginner Basics
Topic: Bridge-Local
Replies: 20
Views: 20540

Re: Bridge-Local

looking forward for 6.41 release so no more master, slave ports. just bridge!
by freemannnn
Sat Sep 09, 2017 9:18 am
Forum: Beginner Basics
Topic: Remotely access second router, connected to the first.
Replies: 10
Views: 4205

Re: Remotely access second router, connected to the first.

yes. and you press "connect to romon" button at winbox to connect and see other romon devices.
by freemannnn
Fri Sep 08, 2017 8:40 pm
Forum: Beginner Basics
Topic: Remotely access second router, connected to the first.
Replies: 10
Views: 4205

Re: Remotely access second router, connected to the first.

why dont you just use RoMON? (Tools - RoMON)
this is the way i connect to various mikrotik equipment (ap, switches etc) behind my main router of my customers.
no need for port forward. just enable it and you ready to go!!!
by freemannnn
Thu Sep 07, 2017 1:23 pm
Forum: General
Topic: Hotspot Attack ( high CPU use )
Replies: 9
Views: 2196

Re: Hotspot Attack ( high CPU use )

yes i moved them at top.
the rules are working when you make multiple requests to login to hotspot. eg when you try to open a set of mupltiple bookmarks at once or when you click various bookmarks too fast.
thanx for this rule set.
by freemannnn
Thu Sep 07, 2017 10:08 am
Forum: General
Topic: Hotspot Attack ( high CPU use )
Replies: 9
Views: 2196

Re: Hotspot Attack ( high CPU use )

i tested the above rules with hotspot login page. when i click rapidly (F5) refresh in chrome at login page i can see that mikrotik cpu usage was 20-30%. the above rules didnt filter this. when i was rapidly pressing a bookmark http link (http://www.imdb.com) at chrome the cpu usage was normal 5-10%...
by freemannnn
Wed Sep 06, 2017 2:37 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 26237

Re: v6.40.3 [current]

You can install RouterOS version X with bundle package, upload separate packages from another RouterOS version Y and then simply either reboot (if packages are from newer version) or run "/system package downgrade" (if packages are from older RouterOS version). wow.... good to know that. thanx. i j...
by freemannnn
Fri Aug 04, 2017 3:31 pm
Forum: Wireless Networking
Topic: CAPsMAN tx and rx chains
Replies: 4
Views: 1384

Re: CAPsMAN tx and rx chains

better to leave them hidden - CAPsMAN will automatically use the max enabled chain configuration depending on the CAP hardware.
if we leave them hidden, how can we check in a cap which chains are enabled?
by freemannnn
Wed Jul 26, 2017 6:02 pm
Forum: Announcements
Topic: v6.40 [current]
Replies: 101
Views: 22682

Re: v6.40 [current]

what is the difference of these 2? *) capsman - added " current-registered-clients " and " current-authorized-clients " count for CAP interfaces; is it possible to move these specific columns in the beginning? (like excel) they are placed far right so you have to scroll all the time to see these inf...
by freemannnn
Thu Jul 20, 2017 1:32 pm
Forum: Wireless Networking
Topic: CAPsMAN tx and rx chains
Replies: 4
Views: 1384

Re: CAPsMAN tx and rx chains

better to leave them hidden - CAPsMAN will automatically use the max enabled chain configuration depending on the CAP hardware.
thank u. good to know that!
by freemannnn
Fri Jul 07, 2017 8:37 am
Forum: Wireless Networking
Topic: Slow WiFi (Mikrotik WAP)
Replies: 32
Views: 18529

Re: Slow WiFi (Mikrotik WAP)

can u test transfer from a pc or laptop to NAS with wired connection.
i remember in the old days that some NAS network chip, speed u could achive was only 5mb/sec
by freemannnn
Mon Jul 03, 2017 8:49 am
Forum: General
Topic: [Feature Request] UPnP client for ROS
Replies: 15
Views: 3000

Re: [Feature Request] UPnP client for ROS

sometimes you dont want to touch the device or the network that is setup to provider modem-router. (voip, provider internet tv etc)
by freemannnn
Sat Jul 01, 2017 9:56 am
Forum: The User Manager
Topic: user manager for hap lite
Replies: 8
Views: 8086

Re: user manager for hap lite

i dont see the point paying fees per month to on line radious services than buying a better mikrotik device like rb951 (level 4) or rb2011 (level 5) for usermanager.
by freemannnn
Sat Jul 01, 2017 9:41 am
Forum: General
Topic: [Feature Request] UPnP client for ROS
Replies: 15
Views: 3000

Re: [Feature Request] UPnP client for ROS

i am interested also in this idea as many providers now providing their own modem-routers and i install a mikrotik device for hotspot as a second device.
it would be a nice idea to upnp port 8291 so i can access mikrotik device for remote support.
by freemannnn
Thu Jun 15, 2017 7:16 pm
Forum: Wireless Networking
Topic: Local forwarding vs. CAPsMAN forwarding
Replies: 6
Views: 3836

Re: Local forwarding vs. CAPsMAN forwarding

yes it is correct
by freemannnn
Thu Jun 15, 2017 5:56 pm
Forum: Wireless Networking
Topic: Local forwarding vs. CAPsMAN forwarding
Replies: 6
Views: 3836

Re: Local forwarding vs. CAPsMAN forwarding

Hi. It is really simple. There are two planes in wifi: data plane and control plane. By default local forwarding is enable: it means control (capsman) and data ( data from user to internet) going in the same routerboard If you disable local forwarding: your control will be manage in capsman router ...
by freemannnn
Tue Jun 06, 2017 1:04 pm
Forum: Beginner Basics
Topic: CAPsMAN - Registration Table SNMP - client count per radios
Replies: 1
Views: 434

Re: CAPsMAN - Registration Table SNMP - client count per radios

i would like to see that in capsman, how many clients are registered in each cap.
by freemannnn
Sat Jun 03, 2017 10:08 am
Forum: Beginner Basics
Topic: Which product should I use?
Replies: 5
Views: 513

Re: Which product should I use?

hap lite or hap
RB951Ui-2HnD or RB951G-2HnD
RB2011

...are good for home ap, router functions and learning ros.
RB951Ui-2HnD is my favorite one and my first device i bought to experiment with ROS.
by freemannnn
Mon May 29, 2017 3:12 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208035

Re: Feature requests

it would be nice in capsman interfaces tab a column with how many devices are connected per cap.
by freemannnn
Mon May 29, 2017 1:48 pm
Forum: Wireless Networking
Topic: 12x wAP & controlling frequency
Replies: 9
Views: 941

Re: 12x wAP & controlling frequency

set frquency mode to "regulatory domain"
by freemannnn
Thu May 25, 2017 6:44 pm
Forum: General
Topic: Problem with Winbox DialogBoxes
Replies: 12
Views: 10170

Re: Problem with Winbox DialogBoxes

i think the same is happening to my random.
my solution is to click to different tabs inside opened winbox and after 2-3 clicks it works
by freemannnn
Fri May 12, 2017 10:25 am
Forum: Wireless Networking
Topic: CAPsMAN
Replies: 7
Views: 1381

Re: CAPsMAN

capsman is set at bridge and caps are in capsman forwarding mode. i have setup also hotspot and a queue (pcq) for serving the customers.
i think i will be ok with rb2011 for all these services!
by freemannnn
Fri May 12, 2017 8:47 am
Forum: Beginner Basics
Topic: Parental Control for Certain MAC
Replies: 15
Views: 3404

Re: Parental Control for Certain MAC

And where I setup custom DNS, IP ... for tablet?
I setup them manually on the tablet?
ip and dns is already specified in my rules.
by freemannnn
Thu May 11, 2017 3:20 pm
Forum: General
Topic: Firewall rules only using one CPU
Replies: 8
Views: 1014

Re: Firewall rules only using one CPU

"So i started to setup a method that only logs udp ports from users that is busy downloading torrents."

"p3rad0x" can u post here your full rules for catching torrrenting. i like the idea of "log udp ports" and i would like to test them. thanx
by freemannnn
Thu May 11, 2017 2:15 pm
Forum: Beginner Basics
Topic: Performance of router running hotspot
Replies: 5
Views: 748

Re: Performance of router running hotspot

i would like also to learn what is the "red sign" for cpu utilization for mikrotik routers? for example rb2011UiAS-2HnD
by freemannnn
Wed May 10, 2017 11:46 pm
Forum: Beginner Basics
Topic: Parental Control for Certain MAC
Replies: 15
Views: 3404

Re: Parental Control for Certain MAC

forget about different dhcp,pool,address for the tablet. try these rules. i just tested them to my rb and they are working great. place them on top before other nat rules. /ip firewall nat add action=dst-nat chain=dstnat dst-port=53 protocol=tcp src-mac-address=\ 6C:5F:1C:DB:F5:E9 to-addresses=208.6...
by freemannnn
Mon May 08, 2017 12:43 pm
Forum: RouterBOARD hardware
Topic: mAP lite
Replies: 58
Views: 19603

Re: mAP lite

do you have many lan adapters (physical, vmware, virtualbox) on your windows installation? if yes disable all and leave enable you lan adapter connected to map.
also you should try to netinstall at different laptop or different pc. and different lan cable!
by freemannnn
Sun May 07, 2017 7:14 pm
Forum: Wireless Networking
Topic: Lock client to specific CAPsMAN interface?
Replies: 5
Views: 1509

Re: Lock client to specific CAPsMAN interface?

it would be nice an option to restrict a client to connect only to a specific cap.
making access list to deny for 40 ap is not nice.
by freemannnn
Thu May 04, 2017 8:06 am
Forum: Announcements
Topic: Winbox 3.11 released!
Replies: 94
Views: 285722

Re: Winbox 3.11 released!

new in ROS 6.39 is this *) capsman - added EAP identity to registration table; I can't see it, am i looking in the wrong place? capsman -> registration table -> right click ->show columns EDIT: Nevermind found this What's new in 6.40rc2 (2017-Apr-28 05:24): *) winbox - added "eap-identity" to CAPsM...
by freemannnn
Wed May 03, 2017 9:29 pm
Forum: Wireless Networking
Topic: CAPSMAN: "create enabled" versus "create dynamic enabled"
Replies: 5
Views: 2322

Re: CAPSMAN: "create enabled" versus "create dynamic enabled"

i am using static because i can set parameters to each cap. rename interface name, set configuration (channel, datapath) etc. even after caps reboots their names and configuration stays the same. i dont know how you can do this with dynamic interfaces like "mducharme" above suggested. (with copy com...
by freemannnn
Tue May 02, 2017 7:48 pm
Forum: Beginner Basics
Topic: printer scanner very slow on capsman
Replies: 13
Views: 1308

printer scanner very slow on capsman

Can u test without capsman?
Can u test with local forwarding mode?
by freemannnn
Thu Apr 27, 2017 11:02 am
Forum: Wireless Networking
Topic: capsman antenna gain and commands
Replies: 2
Views: 648

capsman antenna gain and commands

1. it would be nice if u can set antenna gain to caps from capsmanager. i have to setup antenna gain to 40 caps one by one because i need less transmit power.
2. would be nice to apply commands from capsman to caps like reboot, beep, telnet etc
by freemannnn
Wed Apr 26, 2017 7:24 pm
Forum: Wireless Networking
Topic: CAPsMAN constant problems with performance
Replies: 16
Views: 4506

CAPsMAN constant problems with performance

For me local forwarding at my caps is only working when i have setup at caps a bridge with ether1. When i enable local forwarding it automatic add wlan1 to that bridge (caps).
by freemannnn
Sat Apr 22, 2017 9:12 pm
Forum: Wireless Networking
Topic: rbwap2nd horizontal or vertical install?
Replies: 0
Views: 338

rbwap2nd horizontal or vertical install?

vertical mount on a wall or horizontal Ceiling mount?
does it matter for a hotel corridor with rooms left and right?
by freemannnn
Thu Apr 20, 2017 10:44 pm
Forum: General
Topic: rb2011+capsman+pcc+pcq is enough?
Replies: 1
Views: 453

rb2011+capsman+pcc+pcq is enough?

i am setting a capsman at a rb2011 with 37 caps and pcc with 2 vdsl 50mbps down/5mbps up each. sometimes when i make speedtest (Speedtest.net by Ookla) the cpu usage of rb2011 jumps to 70-80% hotel is close now. so i am the only one using the internet. will be enough for the task when the hotel open...
by freemannnn
Thu Apr 20, 2017 8:01 am
Forum: General
Topic: RB951Ui-2HnD poe out to RBwAP2nD
Replies: 3
Views: 493

Re: RB951Ui-2HnD poe out to RBwAP2nD

i always use the official power supply for rb951.
how did you calculate 19w ?
thanx
by freemannnn
Wed Apr 19, 2017 11:01 pm
Forum: General
Topic: RB951Ui-2HnD poe out to RBwAP2nD
Replies: 3
Views: 493

RB951Ui-2HnD poe out to RBwAP2nD

does RB951Ui-2HnD (ether5 poe out) has enough power to feed a RBwAP2nD? i need to do this senario because is difficult to install new cable from switch direct to rbwap2nd, so i will use in the middle an rb951ui as an AP & switch that continues 10m after to RBwAP2nD.