Community discussions

MikroTik App

Search found 94 matches

by solaoxo
Fri Feb 10, 2017 10:10 am
Forum: General
Topic: ROS failure rules are not accurate.
Replies: 6
Views: 1497

Re: ROS failure rules are not accurate.

This is not a BUG. The rule will be invalid if you are using an inactive interface as a matcher.
Once the interface is active, then the rule will be valid.
I changed the picture to make it easier to see. The firewall rules refer to interfaces other than pppoe-out1.
by solaoxo
Thu Feb 09, 2017 11:46 pm
Forum: General
Topic: ROS failure rules are not accurate.
Replies: 6
Views: 1497

Re: ROS failure rules are not accurate.

If I remember correctly, this is logical bug in RouterOS. It doesn't like unknown/inactive interfaces as condition. It makes sense when there's no negation, because in that case it really doesn't know what to do with it and such rule can't match anything. But when negated, unknown/inactive interfac...
by solaoxo
Thu Feb 09, 2017 2:11 pm
Forum: General
Topic: ROS failure rules are not accurate.
Replies: 6
Views: 1497

ROS failure rules are not accurate.

http://forum.mikrotik.com/download/file ... w&id=26899
In the picture is not limited to the pppoe-out1 firewall, but why the failure of the rules.
by solaoxo
Tue Jan 24, 2017 3:18 am
Forum: Wireless Networking
Topic: Ros Android 6.0 above the system compatibility is poor
Replies: 3
Views: 990

Re: Ros Android 6.0 above the system compatibility is poor

Using the mi, oppo, vivo these three brands, as long as the system is above the Android 6.0 there is such a problem is to use speedtest test.
Brush off third parties such as CM13, CM14, the problem remains.
Mobile phone hardware MTK Qualcomm, ros is the default configuration.
by solaoxo
Mon Jan 23, 2017 1:21 pm
Forum: Wireless Networking
Topic: Ros Android 6.0 above the system compatibility is poor
Replies: 3
Views: 990

Ros Android 6.0 above the system compatibility is poor

Such as the title, in the Android 6.0 system, the speed is limited to 2MB or so, in other wireless router at least 5MB above the speed. Previously thought it was a problem after the mobile phone system update, until a few friends with different models, there have been such problems. Mobile phone upg...
by solaoxo
Mon Jan 16, 2017 12:58 am
Forum: Announcements
Topic: v6.36.4 [bugfix] is released!
Replies: 51
Views: 18691

Re: v6.36.4 [bugfix] is released!

Disk writing has increased fivefold since opening Fasttrack.
by solaoxo
Wed Jul 13, 2016 6:42 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 76030

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

/ip firewall nat
[size=85][font=monospace]add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\[/font][/size]
   192.168.88.8
This rule itself is outside the limit of pppoe-out1, why pppoe-out1 will fail after the break.
by solaoxo
Tue Jul 12, 2016 7:18 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 76030

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

/ip firewall nat
add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\
   192.168.88.8

This rule itself is outside the limit of pppoe-out1, why pppoe-out1 will fail after the break.
by solaoxo
Fri Jul 08, 2016 7:38 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 76030

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

/ip firewall nat
add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\
    192.168.88.8
This rule itself is outside the limit of pppoe-out1, why pppoe-out1 will fail after the break.
by solaoxo
Sat Jun 25, 2016 11:38 pm
Forum: General
Topic: cant make GPON ONU to work
Replies: 49
Views: 19637

Re: cant make GPON ONU to work

Was originally   looking for   GPON ONU module,   look at this situation , bought   does not take , or forget .   TP-LINK   is   a good ,   cheap   and easy to use , good compatibility .
by solaoxo
Sat Jun 25, 2016 11:32 pm
Forum: General
Topic: cant make GPON ONU to work
Replies: 49
Views: 19637

Re: cant make GPON ONU to work

I am here to support LOID certified in the ROS in the correspondingauthentication interface?
by solaoxo
Thu Mar 24, 2016 10:05 pm
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 23876

Re: Winbox3.4 released!

On the window, Chinese system time display is incomplete. I think it is this way for any machine not using 96dpi. I have the same issue under Windows 10 and 200dpi. As with the columns in ip/firewall/filter, for example, the column widths in the log should be user-adjustable - that would fix this i...
by solaoxo
Wed Mar 23, 2016 5:42 pm
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 23876

Re: Winbox3.4 released!

QQ截图20160323233520.png
On the window Chinese system time display incomplete.
by solaoxo
Tue Oct 27, 2015 6:05 pm
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144178

Re: Winbox 3 RC

On the Chinese operating system, no way to see the whole time.
file.php.png
by solaoxo
Tue Oct 27, 2015 6:04 pm
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144178

Re: Winbox 3 RC

On the Chinese operating system, no way to see the whole time.
file.php.png
by solaoxo
Thu Oct 22, 2015 11:30 pm
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144178

Re: Winbox 3 RC

On the Chinese operating system, no way to see the whole time.
QQ截图20151023042804.png
by solaoxo
Sun Oct 04, 2015 11:18 pm
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144178

Re: Winbox 3 RC

On the Chinese operating system, no way to see the whole time.
QQ截图20151005041541.png
by solaoxo
Tue Sep 22, 2015 5:20 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 44875

Re: v6.33rc release candidate

Why ROS recent version of the meter number is not accurate.
QQ截图20150922204808.png
QQ截图20150922204756.png
QQ截图20150922204740.png
QQ截图20150922210429.png
by solaoxo
Fri Sep 18, 2015 2:03 pm
Forum: RouterBOARD hardware
Topic: The role of radio circuits small white patch
Replies: 3
Views: 1103

Re: The role of radio circuits small white patch

This is used by factory only, it has no use for end user.
I want to know what the two white patches are, capacitors, inductors, resistors, or simply make the connection with it.
by solaoxo
Fri Sep 18, 2015 1:24 pm
Forum: RouterBOARD hardware
Topic: The role of radio circuits small white patch
Replies: 3
Views: 1103

The role of radio circuits small white patch

If that, check a lot of information, I did not find. SMD red box what role, her brother know that you answer the next.
QQ截图20150918182314.png
by solaoxo
Thu Sep 10, 2015 12:53 am
Forum: Wireless Networking
Topic: Set Wireless to Station + AP Mode Simultaneous? WISP Client?
Replies: 68
Views: 63078

Re: Set Wireless to Station + AP Mode Simultaneous? WISP Client?

DD-WRT can do it, why not do it ros, post up to now no official staff reply ah.
by solaoxo
Thu Sep 10, 2015 12:31 am
Forum: Wireless Networking
Topic: CAPsMAN and 4 CAP devices
Replies: 13
Views: 2733

Re: CAPsMAN and 4 CAP devices

You may pack a mistake to have chosen wireless-cm2 can.
QQ截图20150910052908.png
by solaoxo
Thu Sep 10, 2015 12:17 am
Forum: Wireless Networking
Topic: ros wds only can relay it?
Replies: 2
Views: 609

ros wds only can relay it?

ros wds only to relay, so why not do the same with DD-WRT universal relay. Such compatibility bad, wifi with other brands simply can relay up.
by solaoxo
Fri Jul 24, 2015 4:30 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 44071

Re: v6.30.2 bugfix release

Like I said, you are not using it correctly. 1) your start time is "startup". this is not correct 2) remove "Execute" from scheduler, you don't need it This is how you need to set it up: Screenshot 2015-07-24 16.15.19.png I know, but had previously been so used up, so relatively simple, sometimes t...
by solaoxo
Fri Jul 24, 2015 4:13 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 44071

Re: v6.30.2 bugfix release

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:
Screenshot 2015-07-24 15.41.07.png
sagege.png
Red Frames of how to write to execute.
by solaoxo
Fri Jul 24, 2015 3:56 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 44071

Re: v6.30.2 bugfix release

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:
Screenshot 2015-07-24 15.41.07.png
Give me a specific script can be executed in the name of the scheduler in the script is DDNS.
by solaoxo
Fri Jul 24, 2015 3:30 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 44071

Re: v6.30.2 bugfix release

'execute' in not running scheduler. The problem is still in 6.30.2 did not even repair. He said several times, even official replies are not, really disappointing. +1 sheduler not work solaoxo, 3bs how are you testing it? post full example please it is working for me there have been many changes to...
by solaoxo
Thu Jul 23, 2015 8:02 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 44071

Re: v6.30.2 bugfix release

'execute' in not running scheduler.
The problem is still in 6.30.2 did not even repair.
He said several times, even official replies are not, really disappointing.
by solaoxo
Fri Jul 17, 2015 3:57 pm
Forum: Announcements
Topic: v6.30.x bugfix release
Replies: 136
Views: 38766

Re: v6.30.1 bugfix release

'execute' in not running scheduler.
The problem is still in 6.30.1 did not even repair.
by solaoxo
Thu Jul 16, 2015 8:03 pm
Forum: Announcements
Topic: v6.30.x bugfix release
Replies: 136
Views: 38766

Re: v6.30.1 bugfix release

'execute' in not running scheduler.
The problem is still in 6.30.1 did not even repair.
by solaoxo
Fri Jul 10, 2015 1:52 pm
Forum: Announcements
Topic: MikroTik smartphone app (ex Tik-App)
Replies: 436
Views: 177140

Re: Tik App, MikroTik android utility ALPHA test

45354.3465.jpg
Does not support the Chinese, I have to say is a pity.
Software poor stability, easily strong back.
by solaoxo
Thu Jul 09, 2015 9:34 am
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144178

Re: Winbox 3 RC

111111.png
On Chinese window system, winbox time in minutes and seconds do not see.
by solaoxo
Thu Jul 09, 2015 9:27 am
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 48688

Re: 6.30 released

QQ截图20150709142253.jpg
QQ截图20150709142300.jpg
'fasttrack connection' closes, dynamic rules are not automatically deleted.
by solaoxo
Wed Jul 08, 2015 7:53 pm
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 48688

Re: 6.30 released

'execute' in not running scheduler.
by solaoxo
Mon Jul 06, 2015 7:12 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 109186

Re: CAPsMAN v2 ready for testing

Just across the middle CAPsMAN other brands would not recognize the switch.
by solaoxo
Fri Jul 03, 2015 9:51 am
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 56094

Re: RB3011 Block diagram?

June has been three days, why have not heard.
by solaoxo
Tue Jun 30, 2015 4:56 am
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

And inside photos? :) Thanks
IMG_20150630_090739.jpg
IMG_20150630_090757.jpg
by solaoxo
Tue Jun 30, 2015 4:53 am
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

And inside photos? :) Thanks Oh, you say should be the internal circuit board, and I thought it was winbox it. rb951-2n and rb941 are the first hands-on, the board out of the mess, but does not affect use. rb941 with the line too thick too hard, but there is no screw shell, the shell is hard togeth...
by solaoxo
Tue Jun 30, 2015 3:16 am
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

And inside photos? :) Thanks
There are before and after conversion and modification before been compared, but images are not saved, and I use the same mobile phone comparison in the same location, just remember that the signal is good about 10dBm.
by solaoxo
Tue Jun 30, 2015 3:10 am
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

And inside photos? :) Thanks
No cutting plan before conversion, and it has not condition contrast, unless then buy a.
by solaoxo
Mon Jun 29, 2015 10:54 pm
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

QQ图片20150630034915.jpg
Reconstruction costs only $ 3, looks pretty good now.
by solaoxo
Mon Jun 29, 2015 10:37 pm
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

Adding an external antenna can not only improve the signal, but also enhance the ability to receive, all of my rb951 and rb941 are converted into an external antenna. Please add photo QQ截图20150630033319.jpg QQ截图20150630033432.jpg Signal before the transformation did not cut diagram, so I can not be...
by solaoxo
Mon Jun 29, 2015 3:05 am
Forum: RouterBOARD hardware
Topic: What does MikroTik have against external antennas in SOHO products?
Replies: 45
Views: 21952

Re: What does MikroTik have against external antennas in SOHO products?

Adding an external antenna can not only improve the signal, but also enhance the ability to receive, all of my rb951 and rb941 are converted into an external antenna.
by solaoxo
Sun Jun 28, 2015 9:05 pm
Forum: General
Topic: 6.30 RC final fixes before release
Replies: 96
Views: 26089

Re: 6.30 RC final fixes before release

scheduler is not working.
by solaoxo
Sat Jun 27, 2015 1:59 pm
Forum: General
Topic: ros 6.30 scheduler failure
Replies: 0
Views: 1001

ros 6.30 scheduler failure

I have two devices are upgraded 6.30rc rb version, timed script results that are not, there is rc20, there rc22.
by solaoxo
Thu Jun 18, 2015 6:54 pm
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 56094

Re: RB3011 Block diagram?

RB3011 look ugly, no desire to buy.
by solaoxo
Wed Jun 17, 2015 1:44 am
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 56094

Re: RB3011 Block diagram?

RB3011 appearance does not look good at all, or CRS series of good-looking.
by solaoxo
Sun Jun 14, 2015 12:37 am
Forum: Beginner Basics
Topic: hEX lite with DDR1 or DDR2's?
Replies: 3
Views: 1305

Re: hEX lite with DDR1 or DDR2's?

Internal circuit board is really simple ah, you could save are saved.
by solaoxo
Sat Jun 13, 2015 4:38 pm
Forum: Beginner Basics
Topic: hEX lite with DDR1 or DDR2's?
Replies: 3
Views: 1305

hEX lite with DDR1 or DDR2's?

If that, who has an internal map, send photos to see, thank you for this.
by solaoxo
Wed Jun 10, 2015 9:20 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 109186

Re: CAPsMAN v2 ready for testing

When CAPsMAN v2 switch latency, no better than the switched wds, wds truly seamless switching.
by solaoxo
Fri May 29, 2015 7:27 pm
Forum: Announcements
Topic: v6.29 released
Replies: 193
Views: 56548

Re: v6.29 released

There are two devices, rb951-2n and rb941 were wds, but whenever the wireless settings change or off and then turned on, the connection is not on, the only one reboot before you can.
by solaoxo
Tue Mar 31, 2015 4:19 am
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 144178

Re: Winbox 3 RC

winbox 3 rc6 difficult to use, stable, always turn off automatically, or rc5 good, very stable, but I did not save, I do not know now where can be downloaded to.
by solaoxo
Thu Mar 26, 2015 6:28 am
Forum: Scripting
Topic: The script for help, how can also determine the two iP
Replies: 0
Views: 378

The script for help, how can also determine the two iP

Such is the case, if the 10.10.10.50 online, then judging 10.10.10.51 and 10.10.10.52 two IP are online or one online open pppoe-out3, if they are not online will shut down.
by solaoxo
Thu Mar 26, 2015 4:55 am
Forum: Wireless Networking
Topic: CAPsMAN does not support WDS
Replies: 0
Views: 604

CAPsMAN does not support WDS

CAPsMAN no WDS function, a lot of people in reality will be used.
by solaoxo
Wed Mar 25, 2015 6:17 am
Forum: Announcements
Topic: hAP lite
Replies: 392
Views: 183649

Re: hAP lite

If there could be integrated with ADSL, the VDSL version is better
by solaoxo
Fri Mar 20, 2015 4:51 pm
Forum: Announcements
Topic: hAP lite
Replies: 392
Views: 183649

Re: hAP lite

In none of Chinese a price, the price as high as $41.9118
by solaoxo
Sun Mar 01, 2015 7:58 pm
Forum: General
Topic: PPPoE client script function.
Replies: 1
Views: 837

Re: PPPoE client script function.

Timing scripts we here used a lot with PPPoE client state related, if the PPPoE client script function, it will be more convenient save trouble is much more efficiency.
by solaoxo
Sun Mar 01, 2015 7:48 pm
Forum: General
Topic: PPPoE client script function.
Replies: 1
Views: 837

PPPoE client script function.

Strong demand to achieve PPPoE client script functions like the same network monitor.
by solaoxo
Thu Feb 26, 2015 5:50 pm
Forum: Announcements
Topic: hAP lite
Replies: 392
Views: 183649

Re: hAP lite

Can buy a hAP lite. at what time China
by solaoxo
Thu Feb 26, 2015 5:49 pm
Forum: Beginner Basics
Topic: Wake on LAN.
Replies: 0
Views: 461

Wake on LAN.

Why didn't ROS network wake-up function, system dd-wart and Asus are ah.
by solaoxo
Tue Feb 24, 2015 5:07 pm
Forum: Announcements
Topic: hAP lite
Replies: 392
Views: 183649

Re: hAP lite

Consideration can be given a mt7621 scheme, performance is much higher. The cost should not where to go.
by solaoxo
Tue Feb 24, 2015 4:41 pm
Forum: Announcements
Topic: hAP lite
Replies: 392
Views: 183649

Re: hAP lite

Sadly no 5g WiFi, RAM 32M was a very small, at least 64M.
by solaoxo
Tue Feb 24, 2015 4:37 pm
Forum: Wireless Networking
Topic: Wisp how to set
Replies: 1
Views: 648

Wisp how to set

The wireless signal continued other brand how to.
by solaoxo
Mon Feb 23, 2015 8:27 pm
Forum: Beginner Basics
Topic: ARP user online problem
Replies: 3
Views: 1206

Re: ARP user online problem

Too much trouble, it is better to bring identification
by solaoxo
Sun Feb 22, 2015 10:35 pm
Forum: Beginner Basics
Topic: ARP user online problem
Replies: 3
Views: 1206

ARP user online problem

ARP list is static, can not see the client in not online, that can make the color distinguish.
by solaoxo
Sat Jan 24, 2015 12:10 am
Forum: Beginner Basics
Topic: Eoip problems within the network.
Replies: 1
Views: 525

Re: Eoip problems within the network.

Now there is no problem, do not know why.
by solaoxo
Fri Jan 23, 2015 9:34 pm
Forum: Beginner Basics
Topic: Eoip problems within the network.
Replies: 1
Views: 525

Eoip problems within the network.

I have included the establishment of a network eoip channel, both ping pass, but why build a bridge to eoip and network port bound for the spread on the network port can not pass on ros established a dhcp client, choose eoip will be able to obtain ip, bridges can be, that is, not the network port.
by solaoxo
Wed Dec 17, 2014 8:24 pm
Forum: Beginner Basics
Topic: rb951g-2hnd hardware acceleration you have nat
Replies: 1
Views: 1050

rb951g-2hnd hardware acceleration you have nat

My rb951g-2hnd simply set up access to the Internet, the policy did not do anything, why it takes up 12MB download speeds more than 80 percent, and if there is a hardware accelerated nat impossible to occupy such a high
by solaoxo
Wed Oct 22, 2014 3:08 pm
Forum: General
Topic: ros Why not remote startup and shutdown.
Replies: 3
Views: 1537

ros Why not remote startup and shutdown.

As stated, many computers now support remote boot.
by solaoxo
Thu Oct 16, 2014 4:09 am
Forum: General
Topic: Why no wifi registration list comment
Replies: 1
Views: 949

Why no wifi registration list comment

The same mac, inside the dhcp lease had comment, wifi mac registered presence should also display the same the same comment.
by solaoxo
Thu Oct 16, 2014 3:22 am
Forum: Scripting
Topic: Online less than 10 minutes to close the speed limit
Replies: 0
Views: 482

Online less than 10 minutes to close the speed limit

If that is mainly less than 10 minutes online time this regulation does not know how to write, how to put conditions to fill the following script
:foreach aaa in=[/cap reg find mac-address=10:A5:E5:0E:EB:79] do={
/queue sim disable "ALL"}
by solaoxo
Tue Aug 26, 2014 10:17 am
Forum: Beginner Basics
Topic: Wifi phone automatically switch problem?
Replies: 4
Views: 1039

Re: Wifi phone automatically switch problem?

Switching is done by client. Set more aggressive roaming on his wireless driver or force disconnect by ap when low signal. But I don't recommend the second option.
Thanks reply, it seems there is no way to solve.
by solaoxo
Tue Aug 26, 2014 5:30 am
Forum: Beginner Basics
Topic: Wifi phone automatically switch problem?
Replies: 4
Views: 1039

Re: Wifi phone automatically switch problem?

The effect is not very good, and sometimes will automatically switch, and sometimes it does not.
by solaoxo
Tue Aug 26, 2014 3:45 am
Forum: Scripting
Topic: eoip script help.
Replies: 3
Views: 1417

Re: eoip script help.

add a simple script something like this

ros code

local remoteIP [resolve yourdomain.com]
interface eoip set your-eoip-tunnel remote-address=$remoteIP
}
Thanks reply, your script is very easy to use.
by solaoxo
Mon Aug 25, 2014 10:21 am
Forum: Beginner Basics
Topic: Wifi phone automatically switch problem?
Replies: 4
Views: 1039

Wifi phone automatically switch problem?

My phone is i9300, there are two devices, one is the main route rb951g-2hnd other is rb951-2n, when two devices are connected to a wds state, Phone can automatically switch the strongest wifi. But when the phone is connected rb951-2n, speed is greatly reduced. Then I connect two devices directly tog...
by solaoxo
Mon Aug 25, 2014 9:46 am
Forum: Scripting
Topic: eoip script help.
Replies: 3
Views: 1417

eoip script help.

I built eoip, the other side of the router is pppoe dial.
Automatically every 48 hours to replace a ip, eoip the remote-addresses how can automatically change into each other changed ip.
such as the other side of ddns is www.mydigit.cn
by solaoxo
Fri Mar 14, 2014 5:33 pm
Forum: Beginner Basics
Topic: Mark the connection problem?
Replies: 5
Views: 1152

Re: Mark the connection problem?

I would suppose that is traffic that is not part of the connection but rather "related" traffic. Difficult to understand. Per the documentation, the connection states are: established - a packet which belongs to an existing connection invalid - a packet which could not be identified for some reason...
by solaoxo
Fri Mar 14, 2014 4:27 pm
Forum: Beginner Basics
Topic: Mark the connection problem?
Replies: 5
Views: 1152

Re: Mark the connection problem?

I would suppose that is traffic that is not part of the connection but rather "related" traffic.
Difficult to understand.
by solaoxo
Tue Mar 11, 2014 10:25 pm
Forum: Beginner Basics
Topic: ros mark connectivity issues?
Replies: 1
Views: 627

ros mark connectivity issues?

ROS connection exists traffic overflow mark, mark two different direct connection, first hold on, there will still be the second flow, but very little traffic only. Direct labeling package will not. Why should the first mark and then mark the package it is connected, I feel so directly labeled packe...
by solaoxo
Tue Mar 11, 2014 3:03 pm
Forum: Beginner Basics
Topic: Mark the connection problem?
Replies: 5
Views: 1152

Mark the connection problem?

The first label connection and marking packet have traffic overflow problem, even if the direct labeling the same two connection, the first not pass, second will flow, but relatively few. Direct marking packets are not flow overflow problem.
My version is 6.10.
by solaoxo
Mon Jan 13, 2014 4:43 pm
Forum: Beginner Basics
Topic: The question of L7???
Replies: 2
Views: 727

Re: The question of L7???

why not ???

its work on packet regx.
so I think it must support UDP ...
Is to support, not before the flow I don't think it is support.
by solaoxo
Fri Jan 10, 2014 9:47 pm
Forum: Beginner Basics
Topic: The question of L7???
Replies: 2
Views: 727

The question of L7???

L7 Is it right? Does not support the UDP protocol???
by solaoxo
Mon Dec 30, 2013 4:44 pm
Forum: Beginner Basics
Topic: Log display problems???
Replies: 0
Views: 447

Log display problems???

In the log time can not completely, minutes and seconds are invisible, are omitted to..
by solaoxo
Thu Dec 12, 2013 5:29 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 114843

Re: v6.7 released

Web proxy can only use the default gateway, also can add the account password verification?
by solaoxo
Thu Dec 12, 2013 5:03 pm
Forum: Beginner Basics
Topic: The L7 script?
Replies: 1
Views: 616

The L7 script?

I find a lot of L7 script in the web, but not why accurate, where can I find a good script L7...
by solaoxo
Wed Nov 06, 2013 2:13 pm
Forum: Beginner Basics
Topic: RB951G-2HnD wireless antenna operating mode?
Replies: 8
Views: 2088

Re: RB951G-2HnD wireless antenna operating mode?

Two antennas total. Each antenna can both transmit and receive. This is MIMO 2x2 It is 2r2t, but ROS itself only opened a road, to open in the wireless interface HT. Sorry, I don't quite understand ? ROS is the default when only one antenna signal, another day to set in the wireless interface is ar...
by solaoxo
Tue Nov 05, 2013 8:04 pm
Forum: Beginner Basics
Topic: RB951G-2HnD wireless antenna operating mode?
Replies: 8
Views: 2088

Re: RB951G-2HnD wireless antenna operating mode?

Two antennas total. Each antenna can both transmit and receive. This is MIMO 2x2
It is 2r2t, but ROS itself only opened a road, to open in the wireless interface HT.
by solaoxo
Tue Nov 05, 2013 7:58 pm
Forum: Beginner Basics
Topic: The socks proxy problem???
Replies: 0
Views: 603

The socks proxy problem???

I opened the socks agent function, now only in the network, how to also can use in the Internet, there is the socks did not update to Socks5???
by solaoxo
Tue Nov 05, 2013 2:47 pm
Forum: Beginner Basics
Topic: The Web Proxy agent?
Replies: 0
Views: 535

The Web Proxy agent?

My ROS agent, but not set the password from the extranet can access through a ROS proxy, how can we let net to account password verification????
by solaoxo
Tue Nov 05, 2013 2:40 pm
Forum: Beginner Basics
Topic: RB951G-2HnD wireless antenna operating mode?
Replies: 8
Views: 2088

RB951G-2HnD wireless antenna operating mode?

RB951G-2HnD wireless antenna operating mode is 1T2R or 2T2R, or 2T1R?
by solaoxo
Mon Nov 04, 2013 5:26 am
Forum: Beginner Basics
Topic: RB951G-2HnD WiFi external problems???
Replies: 0
Views: 591

RB951G-2HnD WiFi external problems???

RB951G-2HnD board with two MMCX-JW interface, is it right? Can be connected with the high gain antenna, if can be connected with the 2.5DBI antenna itself, is it right? Will not send a signal, and if it can be external, also used in what place before there are results, or not set can be used directly.
by solaoxo
Tue Oct 22, 2013 3:43 pm
Forum: General
Topic: ROS does not have a proxy server???
Replies: 4
Views: 1798

Re: ROS does not have a proxy server???

I don't understand what you mean by "climb over the wall". What specifically are you looking for? We have VPN functions, SOCKS, and other features.
Is the HTTP agent and socks agent.
by solaoxo
Mon Oct 21, 2013 4:09 pm
Forum: General
Topic: ROS does not have a proxy server???
Replies: 4
Views: 1798

Re: ROS does not have a proxy server???

Yes, it has a proxy service. Please see here:
http://wiki.mikrotik.com/wiki/Manual:IP/Proxy
This is not what I want, the agent you said is only when the cache is used, not used to climb over the wall.
by solaoxo
Sun Oct 20, 2013 8:46 pm
Forum: General
Topic: ROS does not have a proxy server???
Replies: 4
Views: 1798

ROS does not have a proxy server???

Such as the title, is mainly used to climb over the wall, VPN becomes global, I want to set up an Internet browser to the agent, the other is with the original network, ROS can increase the function.