MikroTik

solaoxo

HYou just set that you do not want to see ipv6 addressees, but all mac protocols are still selected.

Perfectly solved the problem.

solaoxo

QQ截图20230628002957.png

In PPP, it is possible to call scripts separately for going online and going offline. Why doesn’t the dhcp client distinguish between going online and going offline? Many scripts are specified to be used when going online or when going offline.

solaoxo

QQ截图20230627112749.png

When using Torch, the ipv6 option has been turned off, why is it still displayed, and the traffic is also counted.

solaoxo

QQ截图20230627111559(1).png

The search bar is so short, it seriously affects the use, and it can't be displayed completely. Isn't there still a lot of space next to it, why not make it longer.

solaoxo

When policy routing is not used and the ip assigned by dns is not local dns, it can be redirected to local dns normally. After policy routing is used, dns cannot be directed to the local.
This is normal in the ros 6 version, and the 7 version has not been fixed yet.

solaoxo

QQ截图20211129232640.png

Torch does not support double-clicking the right mouse button to copy the ipv6 address, ipv4 is completely fine.

solaoxo

QQ截图20211129231938.png

The find column is too short to fully display the content you are looking for, and there is still a lot of space next to it.

solaoxo

ROS7 is now a test version, why not upgrade the kernel to 5.10 LTS version?

solaoxo

I have multiple pppoe clients, and I use "src-nat" because I heard that it is more efficient than "masquerade". That is true, but by adding that script you are throwing that advantage away. The script will now consume the CPU that is implicitly consumed when using masquerade. Us...

solaoxo

When you have only a single connection it is easy to remove all tracking entries using: /ip firewall connection remove [find] You can place that in the "On Down" script in the PPP profile used with the PPPoE connection (copy profile "default", make that change, and set the PPP p...

solaoxo

/ip firewall connection remove [find where reply-dst-address~"1.2.3.4"]

Perfect script

solaoxo

When you have only a single connection it is easy to remove all tracking entries using: /ip firewall connection remove [find] You can place that in the "On Down" script in the PPP profile used with the PPPoE connection (copy profile "default", make that change, and set the PPP p...

solaoxo

Probably all your connections have that. It is your own external IP used to translate the internal address (the 1st column) to the internet address you have. (100.127.248.189 is another "internal IP", which will again be translated further down the path by your ISP) After the pppoe client...

solaoxo

As in the question, I need to use a script to delete all the connections of the specified ip, but the port number of the ip is different, the script does not know how to write the most efficient.

QQ截图20201229161858.png

solaoxo

This is not a BUG. The rule will be invalid if you are using an inactive interface as a matcher.
Once the interface is active, then the rule will be valid.

I changed the picture to make it easier to see. The firewall rules refer to interfaces other than pppoe-out1.

solaoxo

If I remember correctly, this is logical bug in RouterOS. It doesn't like unknown/inactive interfaces as condition. It makes sense when there's no negation, because in that case it really doesn't know what to do with it and such rule can't match anything. But when negated, unknown/inactive interfac...

solaoxo

http://forum.mikrotik.com/download/file ... w&id=26899
In the picture is not limited to the pppoe-out1 firewall, but why the failure of the rules.

solaoxo

Using the mi, oppo, vivo these three brands, as long as the system is above the Android 6.0 there is such a problem is to use speedtest test.
Brush off third parties such as CM13, CM14, the problem remains.
Mobile phone hardware MTK Qualcomm, ros is the default configuration.

solaoxo

Such as the title, in the Android 6.0 system, the speed is limited to 2MB or so, in other wireless router at least 5MB above the speed. Previously thought it was a problem after the mobile phone system update, until a few friends with different models, there have been such problems. Mobile phone upg...

solaoxo

Disk writing has increased fivefold since opening Fasttrack.

solaoxo

/ip firewall nat
[size=85][font=monospace]add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\[/font][/size]
   192.168.88.8

This rule itself is outside the limit of pppoe-out1, why pppoe-out1 will fail after the break.

solaoxo

/ip firewall nat
add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\
   192.168.88.8

This rule itself is outside the limit of pppoe-out1, why pppoe-out1 will fail after the break.

solaoxo

/ip firewall nat
add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\
    192.168.88.8

This rule itself is outside the limit of pppoe-out1, why pppoe-out1 will fail after the break.

solaoxo

Was originally looking for GPON ONU module, look at this situation , bought does not take , or forget . TP-LINK is a good , cheap and easy to use , good compatibility .

solaoxo

I am here to support LOID certified in the ROS in the correspondingauthentication interface?

solaoxo

On the window, Chinese system time display is incomplete. I think it is this way for any machine not using 96dpi. I have the same issue under Windows 10 and 200dpi. As with the columns in ip/firewall/filter, for example, the column widths in the log should be user-adjustable - that would fix this i...

solaoxo

QQ截图20160323233520.png

On the window Chinese system time display incomplete.

solaoxo

On the Chinese operating system, no way to see the whole time.

file.php.png

solaoxo

On the Chinese operating system, no way to see the whole time.

file.php.png

solaoxo

On the Chinese operating system, no way to see the whole time.

QQ截图20151023042804.png

solaoxo

On the Chinese operating system, no way to see the whole time.

QQ截图20151005041541.png

solaoxo

Why ROS recent version of the meter number is not accurate.

QQ截图20150922204808.png

QQ截图20150922204756.png

QQ截图20150922204740.png

QQ截图20150922210429.png

solaoxo

This is used by factory only, it has no use for end user.

I want to know what the two white patches are, capacitors, inductors, resistors, or simply make the connection with it.

solaoxo

If that, check a lot of information, I did not find. SMD red box what role, her brother know that you answer the next.

QQ截图20150918182314.png

solaoxo

DD-WRT can do it, why not do it ros, post up to now no official staff reply ah.

solaoxo

You may pack a mistake to have chosen wireless-cm2 can.

QQ截图20150910052908.png

solaoxo

ros wds only to relay, so why not do the same with DD-WRT universal relay. Such compatibility bad, wifi with other brands simply can relay up.

solaoxo

Like I said, you are not using it correctly. 1) your start time is "startup". this is not correct 2) remove "Execute" from scheduler, you don't need it This is how you need to set it up: Screenshot 2015-07-24 16.15.19.png I know, but had previously been so used up, so relatively...

solaoxo

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:

Screenshot 2015-07-24 15.41.07.png

sagege.png

Red Frames of how to write to execute.

solaoxo

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:

Screenshot 2015-07-24 15.41.07.png

Give me a specific script can be executed in the name of the scheduler in the script is DDNS.

solaoxo

'execute' in not running scheduler. The problem is still in 6.30.2 did not even repair. He said several times, even official replies are not, really disappointing. +1 sheduler not work solaoxo, 3bs how are you testing it? post full example please it is working for me there have been many changes to...

solaoxo

'execute' in not running scheduler.
The problem is still in 6.30.2 did not even repair.
He said several times, even official replies are not, really disappointing.

solaoxo

'execute' in not running scheduler.
The problem is still in 6.30.1 did not even repair.

solaoxo

'execute' in not running scheduler.
The problem is still in 6.30.1 did not even repair.

solaoxo

45354.3465.jpg

Does not support the Chinese, I have to say is a pity.
Software poor stability, easily strong back.

solaoxo

111111.png

On Chinese window system, winbox time in minutes and seconds do not see.

solaoxo

QQ截图20150709142253.jpg

QQ截图20150709142300.jpg

'fasttrack connection' closes, dynamic rules are not automatically deleted.

solaoxo

'execute' in not running scheduler.

solaoxo

Just across the middle CAPsMAN other brands would not recognize the switch.

solaoxo

June has been three days, why have not heard.

solaoxo

And inside photos? Thanks

IMG_20150630_090739.jpg

IMG_20150630_090757.jpg

solaoxo

And inside photos? :) Thanks Oh, you say should be the internal circuit board, and I thought it was winbox it. rb951-2n and rb941 are the first hands-on, the board out of the mess, but does not affect use. rb941 with the line too thick too hard, but there is no screw shell, the shell is hard togeth...

solaoxo

And inside photos? Thanks

There are before and after conversion and modification before been compared, but images are not saved, and I use the same mobile phone comparison in the same location, just remember that the signal is good about 10dBm.

solaoxo

And inside photos? Thanks

No cutting plan before conversion, and it has not condition contrast, unless then buy a.

solaoxo

QQ图片20150630034915.jpg

Reconstruction costs only $ 3, looks pretty good now.

solaoxo

Adding an external antenna can not only improve the signal, but also enhance the ability to receive, all of my rb951 and rb941 are converted into an external antenna. Please add photo QQ截图20150630033319.jpg QQ截图20150630033432.jpg Signal before the transformation did not cut diagram, so I can not be...

solaoxo

Adding an external antenna can not only improve the signal, but also enhance the ability to receive, all of my rb951 and rb941 are converted into an external antenna.

solaoxo

scheduler is not working.

solaoxo

I have two devices are upgraded 6.30rc rb version, timed script results that are not, there is rc20, there rc22.

solaoxo

RB3011 look ugly, no desire to buy.

solaoxo

RB3011 appearance does not look good at all, or CRS series of good-looking.

solaoxo

Internal circuit board is really simple ah, you could save are saved.

solaoxo

If that, who has an internal map, send photos to see, thank you for this.

solaoxo

When CAPsMAN v2 switch latency, no better than the switched wds, wds truly seamless switching.

solaoxo

There are two devices, rb951-2n and rb941 were wds, but whenever the wireless settings change or off and then turned on, the connection is not on, the only one reboot before you can.

solaoxo

winbox 3 rc6 difficult to use, stable, always turn off automatically, or rc5 good, very stable, but I did not save, I do not know now where can be downloaded to.

solaoxo

Such is the case, if the 10.10.10.50 online, then judging 10.10.10.51 and 10.10.10.52 two IP are online or one online open pppoe-out3, if they are not online will shut down.

solaoxo

CAPsMAN no WDS function, a lot of people in reality will be used.

solaoxo

If there could be integrated with ADSL, the VDSL version is better

solaoxo

In none of Chinese a price, the price as high as $41.9118

solaoxo

Timing scripts we here used a lot with PPPoE client state related, if the PPPoE client script function, it will be more convenient save trouble is much more efficiency.

solaoxo

Strong demand to achieve PPPoE client script functions like the same network monitor.

solaoxo

Can buy a hAP lite. at what time China

solaoxo

Why didn't ROS network wake-up function, system dd-wart and Asus are ah.

solaoxo

Consideration can be given a mt7621 scheme, performance is much higher. The cost should not where to go.

solaoxo

Sadly no 5g WiFi, RAM 32M was a very small, at least 64M.

solaoxo

The wireless signal continued other brand how to.

solaoxo

Too much trouble, it is better to bring identification

solaoxo

ARP list is static, can not see the client in not online, that can make the color distinguish.

solaoxo

Now there is no problem, do not know why.

solaoxo

I have included the establishment of a network eoip channel, both ping pass, but why build a bridge to eoip and network port bound for the spread on the network port can not pass on ros established a dhcp client, choose eoip will be able to obtain ip, bridges can be, that is, not the network port.

solaoxo

My rb951g-2hnd simply set up access to the Internet, the policy did not do anything, why it takes up 12MB download speeds more than 80 percent, and if there is a hardware accelerated nat impossible to occupy such a high

solaoxo

As stated, many computers now support remote boot.

solaoxo

The same mac, inside the dhcp lease had comment, wifi mac registered presence should also display the same the same comment.

solaoxo

If that is mainly less than 10 minutes online time this regulation does not know how to write, how to put conditions to fill the following script
:foreach aaa in=[/cap reg find mac-address=10:A5:E5:0E:EB:79] do={
/queue sim disable "ALL"}

solaoxo

Switching is done by client. Set more aggressive roaming on his wireless driver or force disconnect by ap when low signal. But I don't recommend the second option.

Thanks reply, it seems there is no way to solve.

solaoxo

The effect is not very good, and sometimes will automatically switch, and sometimes it does not.

solaoxo

add a simple script something like this

ros code
local remoteIP [resolve yourdomain.com]
interface eoip set your-eoip-tunnel remote-address=$remoteIP
}

Thanks reply, your script is very easy to use.

solaoxo

My phone is i9300, there are two devices, one is the main route rb951g-2hnd other is rb951-2n, when two devices are connected to a wds state, Phone can automatically switch the strongest wifi. But when the phone is connected rb951-2n, speed is greatly reduced. Then I connect two devices directly tog...

solaoxo

I built eoip, the other side of the router is pppoe dial.
Automatically every 48 hours to replace a ip, eoip the remote-addresses how can automatically change into each other changed ip.
such as the other side of ddns is www.mydigit.cn

solaoxo

I would suppose that is traffic that is not part of the connection but rather "related" traffic. Difficult to understand. Per the documentation, the connection states are: established - a packet which belongs to an existing connection invalid - a packet which could not be identified for s...

solaoxo

I would suppose that is traffic that is not part of the connection but rather "related" traffic.

Difficult to understand.

solaoxo

ROS connection exists traffic overflow mark, mark two different direct connection, first hold on, there will still be the second flow, but very little traffic only. Direct labeling package will not. Why should the first mark and then mark the package it is connected, I feel so directly labeled packe...

solaoxo

The first label connection and marking packet have traffic overflow problem, even if the direct labeling the same two connection, the first not pass, second will flow, but relatively few. Direct marking packets are not flow overflow problem.
My version is 6.10.

solaoxo

why not ???

its work on packet regx.
so I think it must support UDP ...

Is to support, not before the flow I don't think it is support.

solaoxo

L7 Is it right? Does not support the UDP protocol???

solaoxo

In the log time can not completely, minutes and seconds are invisible, are omitted to..

solaoxo

Web proxy can only use the default gateway, also can add the account password verification?

solaoxo

I find a lot of L7 script in the web, but not why accurate, where can I find a good script L7...

solaoxo

Two antennas total. Each antenna can both transmit and receive. This is MIMO 2x2 It is 2r2t, but ROS itself only opened a road, to open in the wireless interface HT. Sorry, I don't quite understand ? ROS is the default when only one antenna signal, another day to set in the wireless interface is ar...

solaoxo

Two antennas total. Each antenna can both transmit and receive. This is MIMO 2x2

It is 2r2t, but ROS itself only opened a road, to open in the wireless interface HT.

solaoxo

I opened the socks agent function, now only in the network, how to also can use in the Internet, there is the socks did not update to Socks5???

solaoxo

My ROS agent, but not set the password from the extranet can access through a ROS proxy, how can we let net to account password verification????

solaoxo

RB951G-2HnD wireless antenna operating mode is 1T2R or 2T2R, or 2T1R?

solaoxo

RB951G-2HnD board with two MMCX-JW interface, is it right? Can be connected with the high gain antenna, if can be connected with the 2.5DBI antenna itself, is it right? Will not send a signal, and if it can be external, also used in what place before there are results, or not set can be used directly.

solaoxo

I don't understand what you mean by "climb over the wall". What specifically are you looking for? We have VPN functions, SOCKS, and other features.

Is the HTTP agent and socks agent.

solaoxo

Yes, it has a proxy service. Please see here:
http://wiki.mikrotik.com/wiki/Manual:IP/Proxy

This is not what I want, the agent you said is only when the cache is used, not used to climb over the wall.

solaoxo

Such as the title, is mainly used to climb over the wall, VPN becomes global, I want to set up an Internet browser to the agent, the other is with the original network, ROS can increase the function.

Search found 108 matches

ros code