Perfectly solved the problem.HYou just set that you do not want to see ipv6 addressees, but all mac protocols are still selected.
Perfectly solved the problem.HYou just set that you do not want to see ipv6 addressees, but all mac protocols are still selected.
Perfect script/ip firewall connection remove [find where reply-dst-address~"1.2.3.4"]
I changed the picture to make it easier to see. The firewall rules refer to interfaces other than pppoe-out1.This is not a BUG. The rule will be invalid if you are using an inactive interface as a matcher.
Once the interface is active, then the rule will be valid.
/ip firewall nat
[size=85][font=monospace]add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\[/font][/size]
192.168.88.8
/ip firewall nat
add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\
192.168.88.8
/ip firewall nat
add action=masquerade chain=srcnat out-interface=!pppoe-out1 src-address=\
192.168.88.8
I want to know what the two white patches are, capacitors, inductors, resistors, or simply make the connection with it.This is used by factory only, it has no use for end user.
Red Frames of how to write to execute.:execute has two parameters, actual script and file.
you should write not the name, but the script, like in the changelog example
this works:
Give me a specific script can be executed in the name of the scheduler in the script is DDNS.:execute has two parameters, actual script and file.
you should write not the name, but the script, like in the changelog example
this works:
And inside photos? Thanks
There are before and after conversion and modification before been compared, but images are not saved, and I use the same mobile phone comparison in the same location, just remember that the signal is good about 10dBm.And inside photos? Thanks
No cutting plan before conversion, and it has not condition contrast, unless then buy a.And inside photos? Thanks
Thanks reply, it seems there is no way to solve.Switching is done by client. Set more aggressive roaming on his wireless driver or force disconnect by ap when low signal. But I don't recommend the second option.
Thanks reply, your script is very easy to use.add a simple script something like this
ros code
local remoteIP [resolve yourdomain.com] interface eoip set your-eoip-tunnel remote-address=$remoteIP }
Difficult to understand.I would suppose that is traffic that is not part of the connection but rather "related" traffic.
Is to support, not before the flow I don't think it is support.why not ???
its work on packet regx.
so I think it must support UDP ...
It is 2r2t, but ROS itself only opened a road, to open in the wireless interface HT.Two antennas total. Each antenna can both transmit and receive. This is MIMO 2x2
Is the HTTP agent and socks agent.I don't understand what you mean by "climb over the wall". What specifically are you looking for? We have VPN functions, SOCKS, and other features.
This is not what I want, the agent you said is only when the cache is used, not used to climb over the wall.Yes, it has a proxy service. Please see here:
http://wiki.mikrotik.com/wiki/Manual:IP/Proxy